Auto population of characteristics-DMS
Hi Friends,
I have a requirement to auto populate the characteristics in additional tab of cv01n whenever the document is created .This has to be done before saving the document.The values are to be populated when the attional tab comes up , the values are to be populated from a custom table based on the sapid , so that user may also have the option of changing the default values before saving .Kindly help.
Thanks and Regards,
Pratap.
HI Maria,
You are correct as this exit triggers when saving the document but we need to see the populated data in additional b tab so that user can have the option to change the autopopulated characteristics.
Can you plz suggest a way to autopopulate the values in the additonal B tab when clicked on cv01n .
Thanks and Regards,
Kanti
Similar Messages
-
Can't find files when building EXE unless the WHOLE codebase is in an auto-populating folder
I have a project with FPGA (specifically a couple cRIO targets).
I have a build spec for a PC target, then a target that's set up for Scan Mode, then a couple targets set up for FPGA mode.
When I try and build the FPGA or Scan Mode targets, I NEED to have the entire code folder (and sub-folders) in an auto-populating folder.
What's strange is that I manually added the same folder, and then pulled the Top-level VI out so that it was easier to see within the project. When I did that, I got errors that files were broken and missing. I then removed that folder and added the same folder as auto-populating and all is well.
Yes, I was able to make the build work by including debugging, not removing TypeDefs, etc. This also cause the build to go from 2MB and 30 secodns build time to 50MB + 10 min build time.
Why si this? I would like to remove the files for other targets from the Source of each of the targets. If I do this, I can't build (these are other top-level VIs that are not appropriate on a per target basis).
Any ideas?Hey Jed,
It sounds like the problem you are having is coming from a file path issue. When you manually add folders as "Snapshot" the file paths are set and will generate errors if the files are moved. The autopopulating folder updates file path locations so you don't have those same issues. Debug mode allows for the file paths to be reassociated, but at the expense of time, and in some cases resources. Enabling debugging will cause the compilation to take longer.
You wrote:
So what I am trying to say is that ALL I did when I removed the auto-populate was to click "Stop Auto Populate" and moved the Top-level VI up one folder level within the project. This causes it to fail compile (unless debugging is checked).
This makes complete sense. By moving ANY VI in a project and not having the folder set to auto-populate or having debugging enabled will cause an error because that VI that you moved isn't where it is supposed to be. This is the way that projects and the compilation of programs was designed.
To avoid this, don't move files around after they have been added to the project unless you have folders set to autopopulate, or have debug mode enabled. When you start shuffling file paths, associations get broken and compilations will fail.
Ben N.
Applications Engineering
Certified LabVIEW Developer -
Auto populating a form with Adobe Reader
Hi,
I have a few questions regarding fillable forms- any feedback would be greatly appreciated.
Basically, I'm trying to make a fillable form that users can fill in with adobe reader. Within the same document, I need a page that will have several fields that will auto-populate based on the user responses typed into earlier fields. Is this possible to do? I haven't purchased acrobat yet, but if it's possible to make a form like this, then I'll buy the program. I know it's possible to do something similar in MS word, but I find those forms really clunky and they're a pain to use with locking/unlocking etc. Ultimately, I need a form that is very simple to use and can be filled in (including the auto-populate function) with just a basic adobe reader, as not everyone using the form would have acrobat. I also need some options for making the final auto-populating form aesthetically pleasing. Would acrobat do the job?
Thanks again for your help!You might want to explain exactly what you mean by "autopopulate". The answer is yes, it's certainly possible, but may need some scripting depending on exactly what it is you want to do.
Regarding aesthetics, that's up to you. Normally you'd create the form layout in a program such as InDesign, Word, or whatever else you have available and use Acrobat to convert the source document to PDF. You'd then add the interactive form fields in Acrobat and set them up to behave as you want.
Note that you can download the trial version of Acrobat and use it for a while before you need to buy it: www.adobe.com/go/tryacrobatpro/ -
Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)? -
To stop Auto population of a field
Hi:
For UK,in IT0077,there are fields for veteran status.The non-veteran field is getting auto populated.I want to stop its auto population.How to do that?
Regards,
KaminiHi Kamini,
Module pool - MP007740
Form set_vet_status.
Makes that field checked - "Non-Veteran".
This form is called in module pool MP007720 - Module P0077A - PERFORM set_ver_status.
In summary, it is a standard code and should not be changed.
Regards,
Dilek -
Reason for Rejection getting Auto Populated
Hi,
I am creating an std order without reference to a preceding document, still the "reason for rejection" is auto populating in the Reason for rejection Tab.
I dont want this to happen, please suggest.
SachinHi,
Suppose an order has been created of 100MTS and been Dispatched & Billed only 90 MTS.Now rest of 10 MTS ,you dont want to dispatch.Then in that case , Marketing person will mention the Reason of Rejection like Order Shortclosed.Now if you will see the Status of order in Document Flow , it will be closed.
So if it is MTO Scenario, then just De-Assign the Stock from the Sales Order and assign it to the newly created one.
Best Regards,
Ankur -
Auto populating the Date/Time Field in a Column
I'm having an issue with the a Date and Time Column type auto populating the current date and time correctly. I've put the =Now() function in the calculated value box. I get the correct date and I get a time but the time is wrong, its
on Pacific Time and my regional settings on the site are Central Time. I can't find any way to specify use central time. is this a bug on microsoft's end or mine? It was working yesterday and not today.check what time zone is your central admin is set to
using
http://<CentralAdminUrl>/_layouts/regionalsetng.aspxand if its pointing to pst you will get pst result .you will see the options wil time zone selected and also some other like calender etc
if you want to change reginaol time for your site so to site settings ==> under site adminstration
you will see regional settings where you can set the time zone it will look like this : -
Auto-populated ID field?
Can I create an auto-populated ID field? Trying to create a unique record ID for an incident report form.
ThanksDepends how many responses you anticipate, I therefore realise not ideal, a workaround I have used is;
Import responses into Excel.
The Date / Time field, whilst displayed as Date and Time, is in fact encoded.
By re formatting that column in Excel to, for instance, 'Number' (with no decimal places), you get a code for the day.
If you format, with decimal places, you get the time code as well. The more decimal places you allow, the more unique (is that English?), the code.
Just a thought -
How to auto populating the field in MS crm
How to auto populating the field in MS crm
Hi,
To populate URL of account based on account name please refer this link.
If you are asking about the address auto populate/complete refer this link
To Retrieve from other entity and populate the fields, for example on entering the account name in opportunity form the fields from account form like Sector, Region can be retrieved and can be auto populated in opportunity form using Odata as follows.
Call the function getAccountDetails in onchange event of Companyname. Do not forget to add Jquery and Json in libraries.
function getAccountDetails() {
var companyName = Xrm.Page.getAttribute("customerid").getValue();
if ((companyName != null)) {
var companyNameValue = companyName[0].name;
var companyNameID = companyName[0].id;
var serverUrl = Xrm.Page.context.getServerUrl();
//The XRM OData end-point
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataSetName = "AccountSet";
var odataSelect = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "(guid'" + companyNameID + "')";
//alert(odataSelect);
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataSelect,
beforeSend: function (XMLHttpRequest) { XMLHttpRequest.setRequestHeader("Accept", "application/json"); },
success: function (data, textStatus, XmlHttpRequest) {
var result_account = data.d;
var name;
var Id;
var entityType;
//replace the fields with the fields on your entity
Xrm.Page.getAttribute("new_sector").setValue(result_account.new_Sector.Value);
Xrm.Page.getAttribute("new_region").setValue(result_account.new_Region.Value);
error: function (XmlHttpRequest, textStatus, errorThrown) { alert('OData Select Failed: ' + odataSelect); }
Also as another option if you donot wat the java script then you can go for a workflow to poplate, please refer this link: https://www.powerobjects.com/blog/2013/11/25/retrieving-data-from-a-related-entity-crm-2013/
Regards, Rekha.J -
The system is auto population partner profit center even when not provided
Hi experts,
While posting FB01,The system is auto population partner profit center even when not provided in the entry.Requested to you could you please assist us as soon as possbile.
Thanks & Best regards
SreenivasWill you please let me know where you get this field partner profit center. In my screen for FB01, I do not see any such field.
Sangram -
Hi,
I need a text field to be auto populated as the sum of 2 fields when the user enters them.How can this be done?
Regards,
VigneshHi Vignesh,
Given your two items to sum are P1_FIELD_1 and P1_FIELD_2, and the item to hold the sum is P1_SUM.
Place the following in the HTML Header of the page (if your running ApEx 4, it goes in the Function and Global Variable Declaration and don't include the script and HTML comment tags):
<script type="text/javascript">
<!--
function getSum(val1, val2) {
if (val1 === '' || isNaN(val1))
val1 = '0';
if (val2 === '' || isNaN(val2))
val2 = '0';
return parseFloat(val1) + parseFloat(val2);
//-->
</script>Place the following in the HTML Form Element Attributes for both P1_FIELD_1 and P1_FIELD_2:
onchange="$s('P1_SUM', getSum($v('P1_FIELD_1'), $v('P1_FIELD_2')));"$s is an ApEx built-in JS function for setting the value of an item. $v is an ApEx built-in JS function for getting the value of an item.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well. -
Auto-populating folders stop becoming auto-populated for no apparent reason
Just what it says. I make an autopopulating folder, use it a few times, come back later and it's no longer auto-populating and I have t to re-link it. I keep my projects on a network drive if that means anything.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell
Solved!
Go to Solution.I used to use autopopulating folders when I first started using projects. Then I discovered that it is so much easier to manipulate things inside Project Explorer when using virtual folders. If I want to move a file, it's just drag n drop. If I want to rename a virtual folder, no problemo. If I want to shuffle virtual folder hierarchies around, not an issue. I can do these things with autopop folders also, but it is so cumbersome that I end up spending too much time focusing on how to move things around and it distracts me from doing the actual coding. The interface should not get in the way of your coding, and with autopop, it surely does (for me).
The tradeoff is that it is difficult to look at in Widnows Explorer. But really it's like viewing the file structure of your hard drive directly, since folders don't really exist on your hard drive anyways.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Auto populating the Notes field in XK02/FK02
Hi Experts,
I have a requirement where I need to auto-populate the Notes field with some text.
When the user clicks the arrow next to Email field a pop up comes up. In this pop up there is a Notes field. (Please see the Screen shot)
I want this Notes field to be auto-populated with "Notes".
How can I accomplish this?
Please advice.
Thanks.Hi -
1. In SE51, go to progrram - SAPLSZA6 and screen 600, you will find in the PBO
MODULE precalculate. "*981i
MODULE d0600_status.
MODULE d0600_output.
LOOP AT g_d0600_adsmtp WITH CONTROL t_control6 CURSOR
t_control6-current_line.
MODULE d0600_display_line.
ENDLOOP.
MODULE d0600_cursor.
2. In the 1st three module below check if any user exit / BADI is there .
(a) MODULE precalculate.
(b) MODULE d0600_status.
(c) MODULE d0600_output
If yes check for modifying the value of the field 'REMARK' in the interanl table g_d0600_adsmtp.
Example g_d0600_adsmtp(1)-Remark = 'Notes'
3. If no BADI / exit is available, then go for implicit enhancement in the perform inside MODULE d0600_output. i.e FORM dynpro_output .
At the end of form FORM dynpro_output - modify the internal table ct_comm_table.
Please note - This form may be used by other programs, so you can put some conditions like restricting to trasaction code etc. -
Reverse auto-population to a shell attribute form/ single record instance BP.
Hi All,
I was wondering if anyone had experience in reverse auto-populating data from a BP within a shell to that same shell's attribute form or a single record instance BP like Project Information.
My use case is that I have 7-10 BP's that gain more definition and have data within in them that changes from phase to phase. This leaves a need for one place with the most current information, which I thought Shell Attributes or Project Information.
That being said as the information changes in theses 7-10 BP's throughout the life of the project the Shell Attribute form and Project Information should be updated via Reverse auto-population.
Can anyone tell me if this scenario is possible, or if there is another way that i can achieve this?
Your help would be appreciated!!!Yes, it is possible and fairly simple. Make sure that the DEs from the various BPs that will be passed are on the form of the shell or single instance record. And make sure that integration is defined for those DEs on the shell or SI record. This is a common mistake, as people forget to define the integration and that is a must for reverse auto-pop.
Then, on the BPs passing the data, open the form from which they will be passed and look at the properties. Define the reverse auto-pop normally, SI records are always available for this, and shells should be too.
Sean -
Auto-Populating Product Value in Special Pricing Product
Hi Experts,
We need to give default value for product(required field) in Special Pricing Product.
And it is not possible to give default value for Product (think because it is a System Defined Mandatory filed)
So i tried to populate the value using Weblink. But didnt get that working.
Thanks in advance for any inputs.
Reagards,
LemuLemu, I do not believe there is a workaround to auto-populating a product value.
Maybe you are looking for
-
i have typed many documents on pages and saved to a new folder i created i have just opened it half hour ago and saved some more and all ok i just reopened to save another and all the documents have gone help how do i get them back and where they go
-
My speakers when i play music go loud then quiet and i dont know why? what is wrong?
my speakers when i play music go loud then quiet and i dont know why? what is wrong?
-
2504 WLC HA sku Using N+1 -- What code to use?
Just need a little direction please, could anyone tell me if N+1 is supported in 7.4.121 code using the 2504 HA sku WLC? I am finding some conflicting information on Cisco docs and forums. If not, what would be the most stable code to use that would
-
Any way to view you tube videos?
is any way to view you tube videos while waiting for this quicktime fiasco to be fixed? No quicktime movies are working at all, and it's really annoying. I was wondering if there was an alternate method to view videos or do I just have to wait patien
-
Curves in region-based hyperdraw?
I just moved from logic 5 platinum on windows to logic 7 pro on osx tiger. i'm pretty happy with the upgrade, but one thing is driving me nuts: how do i make curves in the region-based hyperdraw? I can simply option-click when editing-track based hyp