Auto-start application on Container/Server restart

What's the easiest was to have the container auto-launch a specific application whenever it is started/restarted? I assume this would also happen if the entire server were rtestarted?
_mike

Hello,
If you put a server in your project and you put the servlet at auto-start your application will start automatically when the server will start.
To do that you just have to use the element:
<load-on-startup>1</load-on-startup>
in the servlet tag.
server.xml:
<application name="foo" path="../applications/foo.ear" auto-start="true" />
http-web-site.xml:
<web-app application="foo" name="foo-web" load-on-startup="true" root="/foo" />
Regards
Tugdual Grall

Similar Messages

How to disable autostart (application) when managed server restart ?

Hi Ppl,
How to disable autostart (application) when managed server restart ?
I want some of the applications to remain not started. In WebSPhere, we have an option disable auto start for applications.
I don't find in weblogic.
Thanks

Hi,
I agree with Faisal. When you shutdown your WL server while the application is running, the thing is when you start your server again, it would automatically start the application with it. Now if the application was down when you shutdown the server, it _the application_ won't start with the server.
So it depends on the application last state, when you start your server.
Regards,
Mohab

VM auto start in a single server pool with only local hard disk repository

I searched the forum but can't find anything similar.
Basically, part of the dev environment I have is just starting to use Oracle VM to have a nice centralized place to manage the VMs and managed server.
Those environment doesn't have shared storage and all VMs are stored under local hard disk. (as just having several VMs to share the resource in a single server)
So there is only one server in the server pool.
What should be the best way to set up VM auto-start when this single server is rebooting or start from boot up?
Should I just set up a symlink of /OVS/running_pool/vm1/vm.cfg to /etc/xen/auto/vm1.cfg ?
(p.s. I can't set up HA mode in the single server pool since this is ocfs2.local, it will fail)
Thx in advance.

After some testing, I'm now using a traditional way (for single server with local repository)
auto start VM in dom0 during server starts up:
ln -s /OVS/running_pool/vmname/vm.cfg /etc/xen/auto/vmname
auto shutdown VM in dom0 during server shut down:
- edit /etc/sysconfig/xendomains
change the line:
XENDOMAINS_SAVE=/var/lib/xen/save
to
XENDOMAINS_SAVE=
I also change XENDOMAINS_RESTORE from true to false
Now when I need to reboot/power down the server via OVM, I can just go ahead and do it without migrating..and xendomains will shutdown all my VMs and start them up next time.

Auto start application in web logic

Hello,
I need to auto startup an application in a unix server. The application uses session bean to access the database.
Is it possible to auto start up the application using a cron tab/cron job because the application is using session bean residing in weblogic server?
If not how do i do that? convert the session bean into normal java classes and access database without using a session bean?
Thanks for you help.

Hi,
I tried adding the listener .
It work in tomcat but after i transport it into weblogic 5.1, i give this error.
Received SAXParseException from Sun Parser at line 5, column -1: org.xml.sax.SAXParseException: Element "web-app" does not allow "listener" here.
I removed all other elements and it stil l wont work...
<listener>
<listener-class>com.SAW.project.servlet.SVLTriggerServlet</listener-class>
</listener>
Is there any way to fix this?
Or what s the correct way to wrtie a program that do something once everyday, auto start up when webserver startup and use Session bean to access database?
I tried using cron job but i dont think i can because im using EJB in my program..init() is not called when u start the server...
im going to try the <!ELEMENT load-on-startup (#PCDATA)> to start it using a http servlet instead of a listener...

Auto Start applications

Can anyone tell me how to make applications auto start after a reboot?
I am really fustrated about how I must allways start fussclock manually after a reboot.
Nopt sure if it can be done, but thanks for any help on the subject.

Hello,
Here's how to do to this and not the least bit frustrating.
Open System Preferences, click on Accounts. When that window opens lick where it says: Login Items Now, under the box on the right click the box on the right. A dialog box will open. Navigate to the Applications folder, select the application you wish to launch on boot. *You may be prompted for your administrator password. Quit System Preferences and reboot. That's all there is to it.
Have a good day!
Carolyn

Auto start emctl dbconsole on server reboots...

Hi All,
I am using Linux 5.3 Os and 10g (10.2.0.4) version of database.
I configured listener,db service and emctl service in auto start mode, means if my server gets rebooted then all these service should be up and running automatically.
this script is working fine but the issue is with "emctl" status.
after server reboots if I check emctl console through the url of "https://localhost:1158/em, then it is working .
but If I check manually this service through "emctl status dbconsole" it display as "not running", if I am going to start through "emctl start dbconsole" it display is already running.
now my question is: if this console is already up and running on machine reboots then why it disaply as "not running" when I check manually.
can any one suggest me?
Thanks,
Jigisha...

Hi,
Have a look at the following threads.
Autostart of Services
Re: Autostart of Services
Auto Start Oracle Services didn't work
Re: Auto Start Oracle Services didn't work
Regards,
Hussein

Autorun WebDynpro Application after J2EE Server Restart

Hi All
I have developed an application which registers the event capturer for KM in webdynpro.This application doesnot have any UI output.
I need to run this application after every J2EE server restart.
I changed the portalapp.xml and added startup = true property, but of no use.
Is there any way to do this ?
Points will be rewarded for helpful answers.

You should create a portal service and set startup = true in portalapp.xml

Auto starting applications on boot

I'd love to have terminal auto start and position in the bottom left of the screen. What file should I edit to make this happen? And, what how can I specify where the applicaiton should appear?
I looked for a rc.conf file, but could not find. Perhaps there is an easy way of doing this in the GUI.
Which is the best approach?

Run Terminal and set the window size and position you want, then use "Save As..." from the "File" menu to create a settings file. Add this file to the "Login Items" in "Accounts" System Preference.

Auto-Start Resumable Session upon TTA restart

We use TTA on our administrative servers and we were wondering if there was
a way to start a resumable application session we defined in the object
manager upon restarting the Tarantella server.
Basically we have a monitoring utility that our admins can view using TTA by
logging into our "Monitor User's" (monuser) webtop. It takes a while for
the app to start up and it also graphs some recent historical data, like
"Windows Task Manager/Performance Tab".
The Ideal Sequence of events:
Tarantella Server gets started (or restarted)
monuser's "monitor_app" gets started in the background somewhere and then
goes into TTA's Object "Suspended" mode
Any Admin user logs in as "monuser" and click's on the resumable session
Admin users can go in and view the suspended monitor_app session
Any ideas?
Cyrus

Rob wrote:
CM wrote:
We use TTA on our administrative servers and we were wondering if there was
a way to start a resumable application session we defined in the object
manager upon restarting the Tarantella server.
Basically we have a monitoring utility that our admins can view using TTA by
logging into our "Monitor User's" (monuser) webtop. It takes a while for
the app to start up and it also graphs some recent historical data, like
"Windows Task Manager/Performance Tab".
The Ideal Sequence of events:
Tarantella Server gets started (or restarted)
monuser's "monitor_app" gets started in the background somewhere and then
goes into TTA's Object "Suspended" mode
Any Admin user logs in as "monuser" and click's on the resumable session
Admin users can go in and view the suspended monitor_app session
Any ideas?
Cyrus
Cyrus,
As fas as I know, I don't think you can accomplish the above by just
using Tarantella alone.
One idea could be the following (never tried it personally); after the
Tarantella services get restarted, you could write a script which fires
up the Unix/Linux native client (which can be customized via command
line parameters) as to log in using a predetermined account (eg,
monuser) and start your application.
After a certain amount of time, assuming the application is resumable
you could "kill" the script (and the native client itself) so that
Tarantella can suspend your application.
Thus making, as soon as your admins log in using the monuser account,
they __should__ have "presto" access to the suspended application.
More info about customizing the Unix/Linux native client here:
http://docs.sun.com/source/819-4309-10/en-us/base/indepth/unix_nc_customising.html
Sorry, this is the right URL:
http://docs.sun.com/source/819-4309-10/en-us/base/indepth/nc_running_cmdline.html
Roberto Zini - r.zini<@AT@>strhold.it
"Has anybody around here seen an aircraft carrier?"
(Pete "Maverick" Mitchell - Top Gun)

Web Dynpro Application Deployment need server restart?

Hi Everyone,
When deploying Web Dynpro application on production environment, do we need to restart the sap portal system and server?
I have this issue that when ever we deployed new develop Web Dynpro application with new Abap Function module we need to restart our Enterprise portal production server. Is this really necessary. Is there other way to deploy Web Dynpro application with new Abap function module without restarting the server.
Please help,
Michael Mondelo

Hi michel,
for example , assume you imported a RFC bapi_flights from r/3 to webdynpro dc , and both rfc requests and webdynpro application is deployed to the development server and then moved to quality server.
now you have done some changes in the rfc bapi_flights i mean change in the structure .
case 1 : now with out reimporting the change to webdynpro application and you move the request to the quality r/3, your application dumps . because the structure change is not incorporated at your webdynpro DC.
case 2 : you have re imported the rfc incorporating the changes to the web dynpro applicaiton dc, now with out moving the structure changes request to the quality r/3 and you deploy the webdynpro Dc having the changes to your quality EP , still the applicaiton dumps because your appliction refers to the rfc with out structure change in quality r/3.
case 3 : you have moved the abap request having the strucutre change and also the webdynpro development component where the changes are also incorporated , now on moving both , your application might dump , because the meta data cache might have been not updated with the new structure change in the quality ep server. so you have invalidate the cache in the JCos you have used to import the rfc. or else on restarting the EP server , the new structure change will be updated in the server.
most of the cases Invalidation of cache works and in some cases you have restart the server fo the changes to update.
Regards
Govardan Raj

Error starting application in Weblogic Server 10

After deploying to a workshop server instance which supports beehive, I'm getting this stack trace relating to weblogic.jar. I would appreciate any help here as I'm stuck.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:975)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
     at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:816)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1223)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:434)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
java.lang.NoSuchMethodError: weblogic.servlet.internal.WebAppServletContext.registerServlet(Ljava/lang/String;Ljava/lang/String;Ljava/util/Map;)V
     at com.bea.wlw.runtime.core.servlet.WebappContextListener.contextInitialized(WebappContextListener.java:49)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
     at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:816)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1223)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:434)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)

I see this NoSuchMethodError, which usually means you have a conflicting API call due to a version mismatch. Are you including any older server libraries? I would suggest opening a support case if you are unsure where this could be coming from.
java.lang.NoSuchMethodError: weblogic.servlet.internal.WebAppServletContext.registerServlet(Ljava/lang/String;Ljava/lang/String;Ljava/util/Map;)V

Is there a way to auto-start applications in full screen, such as Safari, Mail, iTunes etc.?

I would like several applications to start in full screen, including Mail, Safari and iTunes, rather than starting them, then making them full screen. Is there a setting somewhere or a way of doing that? Thanks in advance.

I found it. In System Preferences under General "Restore windows when quitting and re-opening apps" has to be checked. However when that is checked it takes you back to all of the sites you had open when you quit the app. I would prefer it start full screen, but back at the home page. Do yours do that as well?

Problem in starting Application with Weblogic Server

Hi friends,
I am using weblogic server 4.5.1.7. After I logged in my program, I
got an error message as follows. I checked my classpath, I did have
"RemoteClientImp_Stub.class" in my server side jar file. I appreciate
your help:
Could not authenticate: java.rmi.MarshalException: Weblogic
RemoteException(weblogic.rmi.MarshalException) remapped
from:weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl]
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]; nested exception is:
weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl]
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]

This is a thread of control that has seen a lot of use, so without more information I don't think there's anything we can do from this end... what was the classpath? Was the exception thrown on the server or the client?
Also, is there a connection with iiop here? Should you post to the misc or ejb lists instead?
"S. Hu" wrote:
Hi friends,
I am using weblogic server 4.5.1.7. After I logged in my program, I
got an error message as follows. I checked my classpath, I did have
"RemoteClientImp_Stub.class" in my server side jar file. I appreciate
your help:
Could not authenticate: java.rmi.MarshalException: Weblogic
RemoteException(weblogic.rmi.MarshalException) remapped
from:weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl]
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]; nested exception is:
weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl]
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]

Problem in starting application with Weblogic server on

Hi friends,
I am using weblogic server 4.5.1.7. After I logged in my program, I
got an error message as follows. I checked my classpath, I did have
"RemoteClientImp_Stub.class" in my server side jar file. I appreciate
your help:
Could not authenticate: java.rmi.MarshalException: Weblogic
RemoteException(weblogic.rmi.MarshalException) remapped
from:weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl]
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]; nested exception is:
weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl]
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]

First, it would be better to post this message in
weblogic.developer.interest.ejb.
If your weblogic server talkes to RemoteClient object on the other weblogic
server. You had to put those xxx_Stub.class in WEBLOGICCLASSPATH of your
weblogic server.
For remote classloading is just for weblogic server to weblogic client. It
is not happened in weblogic server to weblogic server.
Hope it helps.
Cheers - Wei
S. Hu <[email protected]> wrote in message
news:[email protected]..
Hi friends,
I am using weblogic server 4.5.1.7. After I logged in my program, I
got an error message as follows. I checked my classpath, I did have
"RemoteClientImp_Stub.class" in my server side jar file. I appreciate
your help:
Could not authenticate: java.rmi.MarshalException: Weblogic
RemoteException(weblogic.rmi.MarshalException) remapped
from:weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]; nested exception is:
weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.MarshalException: error marshalling arguments
- with nested exception:
[weblogic.rmi.StubNotFoundException: Failed to find a stub for [class
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClientImpl
implements at least one interface [interface
com.qwest.app.alcatraz.ejb.sessionbean.registration.remote.RemoteClient]
which extends Remote.]]

Auto starting iTines on OS X tiiger server

Hi,
I'm running iTunes on my Tiger server under the Admin user. 99.9% of the time I don;t actually listen to music from the admin user, I use either the AppleTV downstairs or the mac mini in the back room.
question- I always have to log on as admin and start iTunes and have it displayed on the monitor before either the AppleTV or mac mini can talk to it. If i minimize iTunes on the server, i get a "cannot connect" message on either of the other two devices.
How can i auto start iTunes on the server when it boots up so that the other devices can talk to it without me having to login and fire it up explicitly?
TIA
alex

I'm not too familiar with server and I'm not sure if there's a way to auto login. you could look in system preferences. But I'm fairly sure under system preferences there is a "login items." You can add iTunes there and it will launch when you login.

Auto-start application on Container/Server restart

Similar Messages

Maybe you are looking for