Auto zoom settings also applied for photo popup, very annoying! when u zoom out in popup, website also zooms out

http://blog.gsmarena.com/see-how-the-nokia-lumia-928-fares-against-the-samsung-galaxy-s4-in-low-light-conditions/
sice i have FULL HD screen i have to use page zoom. But check the above page, the photo popups as well are applied zoom. Very annoying and when zoomed out popup, the website as well zooms out.
Firefox stores the page zoom per domain, fine but how about photo pop ups?
zooming in a 5 MP, 10 MP camera output??

Firefox should try to fix a fault with the webpage?
Have you tried loading those images with Internet Explorer? Or Opera?
For me, IE 8 shows '''"Internet Explorer cannot display the webpage"''' - the image loads very large, like with Firefox 21, but the rest of the PHP page doesn't completely load and that error / warning message appears.
Opera 12 shows the large image with this message. <br /> '''"Could not connect to remote server''' <br />
Check that the address is spelled correctly, or try searching for the site.<br />http://www.gsmarena.com/ads-blog-728.php3 "
Sorry - IMHO, Firefox is loading that image (PHP page) as instructed, the fault doesn't appear to me to be a fault with Firefox.
Why not wait a few hours for some more opinions about this issue. There are a couple of other support helper's on this forum who have vastly more experience with this "web stuff" than I have.
One "dirty" fix for that which I can share is to use a bookmarklet to make the image smaller on the screen, once the "page" is fully loaded. Simply click the bookmarklet to "halve" the image.<br />
https://www.squarefree.com/bookmarklets/pagedata.html <br />
'''zoom images out''' = which will "halve" the image
That will help you get around changing the zoom factor for the whole domain every time you view an image on that website.
And if that "half-size" isn't small enough you can edit the "Location" line of that bookmarklet to a "decimal fraction" that is usable for your display.
This is the full javascript code for that bookmarklet.
<pre><nowiki>javascript:(function(){%20function%20zoomImage(image,%20amt)%20{%20if(image.initialHeight%20==%20null)%20{%20/*%20avoid%20accumulating%20integer-rounding%20error%20*/%20image.initialHeight=image.height;%20image.initialWidth=image.width;%20image.scalingFactor=1;%20}%20image.scalingFactor*=amt;%20image.width=image.scalingFactor*image.initialWidth;%20image.height=image.scalingFactor*image.initialHeight;%20}%20var%20i,L=document.images.length;%20for%20(i=0;i<L;++i)%20zoomImage(document.images[i],.5);%20if%20(!L)%20alert("This%20page%20contains%20no%20images.");%20})();</nowiki></pre>
This part of that string, near the end - '''.5''' - is what halves that image. <br />
%20zoomImage(document.images[i],'''''.5''''');%20if%20( <br />
Edit that '''.5''' to .3 or .25 and see if that makes the image small enough to fit your screen.
Here's a little background on '''bookmarklets'''. <br />
http://www.webreference.com/js/column35/index.html <br />
http://www.worldtimzone.com/bookmarklets/ <br />
http://www.bookmarklets.com/

Similar Messages

  • I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    Thanks for your no help line.

  • "Tab Also Current for Pages" is automatically cleared when reusing page

    I'd want to reuse a page, and include it in the "Tab Also Current for Pages" list of 2 standard tabs, that are displayed conditionally. But when I include it in the second tab, it is automatically cleared in the first. This only happens in the detail Tab edit screen, in the multi tab edit screen the pagenrs are not cleared. So I can achieve what I want, but for future maintanance this is very risky.
    Is there any way to avoid this?

    Hi Capt Egg
    I didn't mean to say that there wasn't a case for a page being associated to more than one tab -- quite the opposite! More than once I wished that could be done...
    But the fact is that currently in Apex we have:
    - A tabular form that allows you associate the same page to multiple tabs (and worth mentioning, allows you to enter anything in the Also Current Pages column, not only a list of page numbers!)
    - A form that doesn't allow you to do so, and validates if you entered a list of valid numbers in the Tab Also Current For Pages field.
    Something needs fixing, and in my experience with Apex the forms I've seen seem to be much more strict in terms of validations than tabular forms for a number of reasons.
    I am guessing that the form is the correct one and implements the intended rules. If that is true, the potential bug in the tabular form may be fixed in the future and the OP won't be able to maintain his applications that used this hack anymore.
    Or maybe not, maybe the bug is in the form. But I would seek clarification on this before going down this route...
    Luis

  • I have OSX 10.7 Lion I set up a separate email account for my wife.  Now when she tries to enter a website we get the following error message:  Java Script: Not Null validator already loaded.  The website never opens and it is difficult to get out of:

    I have OSX 10.7 Lion.  I set up a separate email account for my wife.  All of a sudden when she tries to enter and website from email we get the following error message.  JavaScript;  The notnull validator has already been loaded.  From there we can't seem to go any where.  When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai.  If you try and got directly to Safari you get the same error message and can't go any further.  Please help.

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Audio/Video Settings: Sequence Preset for Photo Sequence

    I have FCP 7.0.3. I am going to edit a sequence of jpgs sized around 1400 width pixels. The client wants a web movie, but she may also need it on a dvd. I am unclear on which sequence preset to use/modify. For the web version the frame size won't need to be bigger than 960x540 at most. Maybe even 720x405.
    I have an AJA Kona3 card so when I go to choose a preset, many options come up. I feel as though it should be ProRes, but don't know settings for sure. It will just be photos in this sequence. I am curious also about frame rate and frame size.
    Thank you.

    Thank you Christina. I want my sequence settings as:
    720x405/Custom (16:9)
    Pixel Aspect Ratio - Square
    Field Dominance - None
    Compressor - Apple ProRes 422
    which will be fine for web delivery, but will that work for a dvd too? Or will I get messed about by the square pixel aspect ratio?
    thanks.

  • I have internet connection (status upper left) but get the message "Cannot open the page". This also applies for my email

    I have checked all that is to be found on the internet and in the apple itunes to get the connectivity.
    When I check the router, the iPod touch is listed. Also when I check the iPod, in the upper corner left is stated that I have connectivity.
    However when I want to go to an internet site, I get the message "Cannot open the page" this is also shown when I start my email?

    Try:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Power off and then back on yor router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troublshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
    - As a tet configure you router for no security
    Do other devices successly connect to the internet via your router
    Does your iPod connect successfully to other networks?

  • Why don't the add ons work when I install them? I can see them in the addon manager, but they don't work when I want to use them. Also very annoying when you have to register for one stinking question!!!

    I installed a new dictionary. Something that worked fine when I installed it in the previous versions, works fine on my pc. But I have installed the dictionary 3 times now and it won't "take". I see it in the addon manager, but when I want to switch from us to dutch dictionary, it's just not there to be switched to. It's annoying and I need the dictionary

    You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.
    * http://kb.mozillazine.org/Spell_checking
    * http://kb.mozillazine.org/Dictionaries
    * https://support.mozilla.org/kb/Using+the+spell+checker

  • Very annoying when iphoto tries to find erased photos

    When starting iphoto, if a folder is selected by default from which the photos have been erased, I have to click "abort" (or whatever it says in english, my version is swedish) for each and every photo that was in that particular folder. If there were 200 photos, I need to click abort 200 times before being able to switch folder or do anything else for that matter. This is extremely annoying and seems not possible to get around, cause if I select that folder again in order to erase that too, the whole thing starts over again and i have to click abort another 200 times. This goes for all folders where the contained images have been erased or moved. Is there a way around this, or a keyboard shortcut for abort all or something?

    I believe if you use iPhoto Library Manager to rebuild the library it will convert it to a managed library.
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option             
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • When I take a picture with the flash on auto, I get a blue circle and no picture. When I turn the flash off the  picture comes out fine. What do I do to take a pic in low light

    When I take a picture with my iphone 4 and the flash is on I get a blue flash and a big blue screen with no pic. When I  turn the flash off the pics come out
    fine. I turn the flash on to take a pic in low light I just get a blue screen. How do I remedy this?

    Try a reset or restart of the device.
    If that doesn't work attempt a restore of the phone's iOS

  • Camera RAW auto tone settings applied to jpegs

    I posted this in the Windows Bridge forum, but a camera raw preference controls this so I am also posting here.
    On jpeg files without any RAW setting applied, Bridge still applies RAW settings to the thumbnails and the preview are thus display incorrectly. Opening the file shows the jpeg as it should be, without RAW settings applied.
    I have RAW preferences set to apply auto settings to RAW files without any current settings.
    I have my RAW settings to open jpegs in RAW *only* when they already have settings. If I set this to disable jpeg support, then the RAW settings are not automatically applied to jpegs without existing settings. aka, Bridge redoes the thumbnails without the auto setting.
    While it is correct to apply auto tone to RAW files without settings, jpeg files are already "developed/printed" and should not get additional auto develop settings automatically applied.
    My Bridge is 4.0.4.2
    Raw is 6.3
    -Norman

    I posted this in the Windows Bridge forum, but a camera raw preference controls this so I am also posting here.
    On jpeg files without any RAW setting applied, Bridge still applies RAW settings to the thumbnails and the preview are thus display incorrectly. Opening the file shows the jpeg as it should be, without RAW settings applied.
    I have RAW preferences set to apply auto settings to RAW files without any current settings.
    I have my RAW settings to open jpegs in RAW *only* when they already have settings. If I set this to disable jpeg support, then the RAW settings are not automatically applied to jpegs without existing settings. aka, Bridge redoes the thumbnails without the auto setting.
    While it is correct to apply auto tone to RAW files without settings, jpeg files are already "developed/printed" and should not get additional auto develop settings automatically applied.
    My Bridge is 4.0.4.2
    Raw is 6.3
    -Norman

  • After installing ios7 on my iPhone 5s i can no longer share my photos and save photos to my camera roll. Even if i go to Settings and privacy then photos there is no access for me to do this.  This includes FB, Viber and pic collage. How can I reinstall ?

    After installing ios7 on my iphone 5s I can no loger share my photos fro my library and save my photos to my camera roll even if I go to Settings and tap Privacy, Photos, there is no provision to set Instagram On.  This is also true with my FB, Viber, Pic collage. Please let me know how to rectify this?  Should I reinstall ios7?  How should I do it?  Thank you.

    After installing ios7 on my iphone 5s I can no loger share my photos fro my library and save my photos to my camera roll even if I go to Settings and tap Privacy, Photos, there is no provision to set Instagram On.  This is also true with my FB, Viber, Pic collage. Please let me know how to rectify this?  Should I reinstall ios7?  How should I do it?  Thank you.

  • The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

    The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

    When you enable Photo Stream on your devices, only new photos you take or import to those devices will be automatically added to your Photo Stream. Existing photos won't.

  • Ever noticed that Auto Tone performs slightly different adjustments when applied during import as opposed to when applied in the Develop module? I've just run some experiments using LR 5.7.1 Camera Raw 8.7.1 using Canon CR2 images. 3 out of 4 test images

    Original Images after applying Auto tone in the develop module
    Image
    14BD3911.CR2
    14BD3912.CR2
    14BD3913.CR2
    14BD3914.CR2
    Exposure captured
    Under
    Over
    Slightly over
    Under
    WB Temp (as shot)
    2300
    2300
    6650
    6650
    WB Tint (as shot)
    +7
    +7
    +6
    +6
    Tone Exposure (auto)
    +2.9
    +0.5
    +0.5
    +1.9
    Contrast (auto)
    +4
    -3
    -17
    +6
    Highlights (auto)
    -48
    -45
    -11
    -10
    Shadows (auto)
    +48
    +45
    +11
    +10
    Whites (auto)
    0
    0
    +23
    +29
    Blacks (auto)
    -7
    -6
    -14
    -6
    Images imported with LR General Preset Auto Tone
    Image
    14BD3911-2.CR2
    14BD3912-2.CR2
    14BD3913-2.CR2
    14BD3914-2.CR2
    Exposure captured
    Under
    Over
    Slightly over
    Under
    WB Temp (as shot)
    2300
    2300
    6650
    6650
    WB Tint (as shot)
    +7
    +7
    +6
    +6
    Tone Exposure (auto)
    +2.9
    +0.5
    +0.5
    +1.9
    Contrast (auto)
    +4
    -2
    -17
    +6
    Highlights (auto)
    -48
    -45
    -12
    -10
    Shadows (auto)
    +48
    +45
    +12
    +10
    Whites (auto)
    0
    0
    +22
    +29
    Blacks (auto)
    -7
    -3
    -12
    -3

    I received two email replies (BriPhoto & Rob Cole) to my above post, which are now missing here. I only mentioned Auto WB because of this statement in your PDF posted here Shared Cat:
    "Apply auto WB and Auto tone to an unmodified photo and note the changes.
    Apply auto WB and tone to another photo with very different exposure and tone and note changes to confirm that changes are different and do depend on the content of the photo being operated on (assumption)."
    You are now saying:
    "However, in this case we are talking about the SAME raw file, imported from the camera's CF card twice. One is imported with no preset, then the Auto Tone preset applied, the other is imported with the Auto Tone preset set in the import module. Both files have the SAME WB setting (As Shot) and the same Temp and Tint, as you would expect. The only differences (in LR) are in the tonal values."
    I repeated Import of the two copies of your 14BD3913 CR2 file (14BD3913.CR2, 14BD3913-2.CR2) following the above procedure. The Tone values are identical for both using LR5.7 on my Windows 7 SP1 system. I cannot duplicate your issue as outlined above.
    Is this the Auto Tone preset you are using on Import?
    Two other things you can try:
    1) Reset your LR Preferences file:
    http://members.lightroomqueen.com/Knowledgebase/Article/View/1148/198/how-do-i-delete-the- lightroom-preferences-file
    2) If that doesn't correct the issue I would try uninstalling LR5.7.1, delete the LR Preferences file, and then reinstall LR5.7.1 using a fresh download.

  • I'm looking for photo editing software

    I am looking for photo editing software that is fairly easy to learn and I also want the feature of adding a splash of color to a black & white photo.  I've seen there is Photoshope Elements and there is Lightroom.  What is recommended?

    For editing an Image, as you describe, Photoshop Elements would be my choice.
    There is also a very helpful, and active Ps Elements Forum, where you will find easy instructions on doing what you describe, plus much more. Should you go with Ps Elements, that forum is: http://forums.adobe.com/community/photoshop_elements
    In general, if you have a Grayscale Image (B/W), just change the Color Mode to RGB, create a New Layer, and paint in the color that you want. However, since I do not use Ps Elements, there might be some extra things, that will help you get the desired results, and that Ps Elements Forum will be great at helping you.
    Good luck,
    Hunt

  • Apply For Job - Manager Rule

    Hello,
    In irecruitment, to send a notification to the managers when an applicant applies for job, i'm using the seeded AME rule which is "Apply For Job - Manager Rule". When i test it going as an applicant and apply for a job, its not sending any notifications. After seeing the metalink note [ID 605603.1], i enabled the business event "oracle.apps.per.api.assignment.update_apl_asg" and tested but still the AME rule is not fired.
    Am i missing something here?
    Thanks a lot in advance.
    KK

    Hi
    There are bugs with certain iRec Notifications, Oracle asked us to implement the following steps to resolve the issue for the bug to which you refer too:
    Add the below attributes to  Transaction type 'iRecruitment Notification Approvals' using 'Use Existing Attributes'  -
    USER_ID_EXISTS
    APPROVAL TYPE
    CURRENT_EMPLOYEE_FLAG
    Create  New Condition: IRC_EVENT_NAME in (APLFORJOB) - as Vignesh outlined
    Remove any existing conditions from Rule: "Apply For Job - Manager Rule" where the attributes are any of these: USER_ID_EXISTS; APPROVAL TYPE; CURRENT_EMPLOYEE_FLAG
    Add new condition:  IRC_EVENT_NAME in (APLFORJOB)  to the 'Apply For Job - Manager Rule'
    Ensure a Hiring Manager name exists in the vacancy which the Candidate is applying and retest the issue. 
    Also ensure either Workflow Background Process is run or System Profile: HR:Defer Update After Approval is set to No at Site/Responsibility Level.
    Hope this helps.
    Charlie

Maybe you are looking for

  • Jabber for Windows - Phone Description

    Looking through the jabber logs I see where the client is getting the description from Call Manager but it is not displaying them on the Use my phone for calls list. So all I have is 4 7962s with no descriptions. Anyone ran into this and found a solu

  • Error while signing a Photoshop extension

    I am trying (for the first time) to sign an extension that I have: java -jar ucf.jar -package -storetype PKCS12 -keystore FILENAME.p12 -storepass PASSWORD -tsa https://timestamp.geotrust.com/tsa Kwik2.zxp -C . . However, I am getting the following er

  • Iphoto and external hard drive issues

    I have backed up my Iphoto onto an external hard drive and then upgraded my iphoto and can't access any photographs. How do I restore my iphoto library from the external hard drive?

  • What to uninstall and what to keep

    I have been an Adobe/Macromedia user for a very long time and I seem to have accumulated a lot of versions of some of the same software on my computer and I need to clean things up and need some help in determining what to uninstall that will not aff

  • Itunes giving error wont load

    yeah when i ope itunes it gives me a error saying it has to close the program i tried the ewido thing doesnt work i dont know what to do and i cant access my windows firewall either it has a error too.and i dont want to reformat the computer cause i