Error while signing a Photoshop extension

I am trying (for the first time) to sign an extension that I have:
java -jar ucf.jar -package -storetype PKCS12 -keystore FILENAME.p12 -storepass PASSWORD -tsa https://timestamp.geotrust.com/tsa Kwik2.zxp -C . .
However, I am getting the following error:
Packaging failed: Unable to create output file: Kwik2.zxp
java.io.IOException: Unable to create output file: Kwik2.zxp
          at com.adobe.ucf.Packager.renameOutput(Packager.java:165)
          at com.adobe.ucf.UCFPackager.createPackage(UCFPackager.java:112)
          at com.adobe.ucf.UCF.doPackage(UCF.java:109)
          at com.adobe.ucf.UCF.main(UCF.java:59)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at org.eclipse.jdt.internal.jarinjarloader.JarRsrcLoader.main(JarRsrcLoader.java:56)
Any idea of what I may be missing?
Thanks a lot,
Alex

In my experiences, the UCF tool will choke if the project's full path contains any spaces (even if you only provide relative paths to the tool, like you do). For example:
"~/My Project/" (vs) "~/MyProject/"
Why, I have no idea.

Similar Messages

Error while signing in. No prompt for Master Password.

Firefox 3.6.15 (Mozilla/5.0 (Windows; U; Windows NT 5.1; sv-SE; rv:1.9.2.15) Gecko/20110303 )
Firefox sync 1.7
Sync NEVER works automatically. In a new FF session it always reports "Error While Signing In". If I try to connect manually I must go through the set-up dialogue and enter my Master Password etc and then it works (during that session).
I have a Master Password defined.
Sync doesn't prompt for that before trying to connect. So the connection fails and sync concludes that a set-up must be performed.
Useless extension in current state.

Hi,
as per the error message is:
"... The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.) ..."
I guess the cert. setup either on your side or the other system's side is not fully correct. Check whether all cert., priv keys and public keys are exchanged propperly and setup as trusted certs.
Regards,
Kai
Edited by: Kai Lerch-Baier on Jul 9, 2009 1:24 PM

Unknown error while signing in

Firefox 3.6.13 + Sync 1.7
Entered username and password okay.
Received the sync key.
While trying to connect I get an "unknown error" displayed in red in the preference dialogue,
or
"Error While Signing In" when I hit the Connect button at lower right corner of Firefox, if I hit that button I get "Sync encountered an error while connecting: Unknown error. Please try again."
This is from a home wireless broadband account, there are not any firewalls in place, and using NAT.
Thanks.

I noticed this error in the JS console:
Error: uncaught exception: [Exception... "Component returned failure code: 0x80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIXPCComponents_Utils.import]" nsresult: "0x80520012 (NS_ERROR_FILE_NOT_FOUND)" location: "JS frame :: file:///home/XXX/.mozilla/firefox/9da8ohi4.default/extensions/%7B340c2bbc-ce74-4362-90b5-7c26312808ef%7D/crypto-modules/WeaveCrypto.js :: <TOP_LEVEL> :: line 45" data: no]

'Error while signing data-Private key or certificate of signer not availabl

Hello All,
In my message mapping I need to call a web service to which I need to send a field value consist of SIGNED DATA.
I am using SAP SSF API to read the certificate stored in NWA and Signing the Data as explained in
http://help.sap.com/saphelp_nw04/helpdata/en/a4/d0201854fb6a4cb9545892b49d4851/frameset.htm,
when I have tested using Test tab of message mapping it is working fine and I am able to access the certificate Keystore of NWA(we have created a keystore view and keystore entry to store the certificate) and generate the signed data ,but when I test end to end scenario from ECC system,it is getting failed in mapping with the error
' Error while signing data - Private key or certificate of signer not availableu2019.
Appreciate your expert help to resolve this issue urgently please.
Regards,
Shivkumar

Hi Shivkuar,
Could you please let me know how you were trying to achieve the XML signature.
We have a requirement where we have to sign the XML document and need to generate the target document as following structure.
<Signature>
     <SignedInfo>
         <CanonicalizationMethod />
         <SignatureMethod />
         <Reference>
                 <Transforms>
                 <DigestMethod>
                 <DigestValue>
         </Reference>
    <Reference /> etc.
</SignedInfo>
<SignatureValue />
<KeyInfo />
<Object>ACTUAL PAYLOAD</Object>
</Signature>
I am analyzing the possibility of using the approach that is given in the help sap link that you have posted above. Any inputs will be apprecited.
Thanks and Regards,
Sami.

Error while signing data-Private key or certificate of signer not available

Hello All,
I am new to PI. I am currently stuck with an issue. The scenario is as explained below.
We need to check for the service availability before processing the data. So, we test for the RFC connection first from the ECC system. During this process, we access the digital certificate stored in the PI system so that it can be validated and allowed to consume this intended service.
Error :
When we trigger the RFC test from the ECC system, we get an error stating ' Error while signing data - Private key or certificate of signer not available '. But when we test the same functionality within PI system(Locally), we does not encounter any such error. The certificate is maintained and it appears fine.
The communication channels are stored with logon credentials.
Can anyone please help me with this error or provide your valuable inputs. Thanks in advance.
Regards,
Shivkumar

Hello,
When we trigger the RFC test from the ECC system, we get an error stating ' Error while signing data - Private key or certificate of signer not available '.
This should be normal behavior since the certificates are not installed in ECC SSL folders of Strust. Why not just install the certificates in the ECC system, perform an ICM restart and do a retest? After all, the certificates would both be the same in PI and ECC.
Hope this helps,
Mark

'error while signing document'

i got this error ('error while signing document') on my 1st attempt to use the service. simple 4 page PDF, no doc. security, same error both b4 & after i edited my user profile (i filled in the missing details & changed the default signature image).
cheers,

Hi,
I am also getting this error while attempting to sign a document. I have checked the first and name fields in my default signature profile for any non-English characters but I am still getting this error. I have also tested with a different signature profile with same results. Please advise if there are
other fields I need to check.
Thanks.

The test encountered an error while signing in to Outlook Web App. HTTP code: 200

Infrastructure: Exchange 2010 SP3 RU2 environment on 17 servers worldwide with CAS, MB, HUB and UM roles. Server 2008 R2 VM's on Hyper-V 2008 R2.
Trying to run the following command to test OWA connectivity on a server in the same Active Directory domain but in a different AD site:
Get-ClientAccessServer -Identity Server1 | test-owaconnectivity -AllowUnsecureAccess -TrustAnySSLCertificate
I get the reponse:
WARNING: [11:04:51.276] : An Outlook Web App page wasn't received.
WARNING: [11:04:51.276] : The test encountered an error while signing in to Outlook Web App.
HTTP code: 200
WARNING: [11:04:51.276] : Test failed for URL 'https://server1.domain.com/owa/'.
ClientAccessServer        MailboxServer            URL
Scenario       Result       Latency          Error
Server1.domain.com      Server2.domain.com  https://server1.domain.com/owa  Logon           Failure
The test encountered an error while signing in to Outlook Web App. HTTP code: 200
This is the same error message received from SCOM on its tests also.
I have created a test account on all 17 servers using ./new-TestCasConnectivityUser and ensured their mailboxes reside on the correct server in the correct database.
All internal servers are set for OWA and ECP for Windows Authentication. Only public facing CAS servers are set to Forms based. That said, have checked the 'Microsoft Exchange Forms-Based Authentication service' is running on both Server1 and Server2 as
are all Exchange services except 'Microsoft Exchange IMAP4' (not used) or 'Microsoft Exchange POP3' (not used).
However, if I run this command:
test-owaconnectivity -AllowUnsecureAccess -TrustAnySSLCertificate -URL
https://server1.domain.com/owa
I get the following success after I have entered my correct credentials:
Windows PowerShell Credential Request : cmdlet Test-OwaConnectivity at command pipeline position 1
Warning: This credential is being requested by a script or application on the Server2.domain.com remote computer.
Enter your credentials only if you trust the remote computer and the application or script requesting it.
Supply values for the following parameters:
MailboxCredential
ClientAccessServer MailboxServer URL
Scenario              Result      Latency    Error
(ms)
                                                        https://server1.domain.com/owa
Logon                 Success    6282.13
So if I login with my domain username, it works and logs in. If the script runs using the 'extest....' user account created by the above ./new-TestCasConnectivityUser.ps1 , it does not work.
Has anyone got any ideas please? I know its not the network as it works under my username, I know all fo the services required are running as it works under my username. There are no entries at all in the receiving server's error logs for Application, System,
Exchange or Powershell at all.
Any help greatly appreciated.
Danny

Did you read this? http://support.microsoft.com/kb/2277649/en-us
Did you run Test-MapiConnectivity? If not, can you run and post results?
HossFly, Exchange Administrator

Error while signing jacob.jar in FMW 11g

Hi,
after setting the PATH like:
set PATH=C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\jdk\bin;%PATH%
while signing the jacob.jar file for the first time after installing 11g Forms in Windows the following error occurs:
C:\Dokumente und Einstellungen\bten>C:\Programme\ORACLE11g\Oracle\Middleware\ins
tances\FRinst\bin\sign_webutil.bat C:\Programme\ORACLE11g\Oracle\Middleware\PFRD
11g\forms\java\jacob.jar
Generating a self signing certificate for key=webutil2...
Keytool-Fehler: java.lang.RuntimeException: Verwendungsfehler: 360 ist kein g³lt
iger Befehl.
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\forms\java\jacob.jar
as C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\forms\java\jacob.jar.old...
1 Datei(en) kopiert.
Signing C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\forms\java\jacob.jar us
ing key=webutil2...
jarsigner error: java.lang.RuntimeException: keystore load: C:\Dokumente und Ein
stellungen\bten\.keystore (Das System kann die angegebene Datei nicht finden)
There were warnings or errors while signing the jar. Please review them.
C:\Dokumente und Einstellungen\bten>
What is the reason, and how can I solve this?
Thanks Bea

Perhaps you are using old WLST code (used for OSB 10g), with OSB 11g.
The ALSBConfigurationMBean (com.bea.wli.sb.management.configuration.ALSBConfigurationMBean) Interface in the com.bea.wli.sb.management.configuration package in the Oracle Fusion Middleware Java API Reference for Oracle Service Bus includes example code illustrating how to import and export Oracle Service Bus 11g configurations, how to change environment values, how to query resources, and so on. Please find it here -
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e15033/toc.htm
Regards,
Anuj

Webutill config error-There were warnings or errors while signing Jar

On configuring utill i am getting following error, but unable to trace that what is can be the cause!....
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up c:\DevSuiteHome_1\forms\java\frmwebutil.jar as c:\DevSuiteHome_1\form
s\java\frmwebutil.jar.old...
1 file(s) copied.
Signing c:\DevSuiteHome_1\forms\java\frmwebutil.jar using key=webutil2...
'jarsigner' is not recognized as an internal or external command,
operable program or batch file.
There were warnings or errors while signing the jar. Please review them.

'jarsigner' is not recognized as an internal or external command,This means that Windows could not find the jarsinger.exe. You will need to modify your PATH environment variable and add the C:\DevSuiteHome_1\jdk\bin\ directory to the PATH. This is where the Oracle supplied jarsinger.exe is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

[Solved] There is a yellow triangle at the bottom of the screen with the message "error while signing in"

Firefox Sync has been working fine between my home computer, work computer and my Android phone but suddenly my home computer has recently stopped syncing. There is a yellow triangle at the bottom of the screen with the message "error while signing in". I have checked passwords and codes on all three devices and check the sync versions are the same. All where correct. I have reinstalled both firefox and sync. I have even tried setting up a new sync account with a different user name but still the same problem. My work computer and phone sync fine but my home computer gets the error. Does anyone have any idea what could be causing this. Any help would be greatly appreciated as this is driving me mad!

I have now discovered that if I manually disconnect (Tools / Sync / Disconnect) and then sync it works but only once. I seem to be able to repeat this manual process indefinitely. I thought that this might give a better mind than mine a clue.

Error while signing a document using API

Hello. I'm using API functions to add a digital signature to a PDF document. While signing this document, I receive an error which looks like:
com.adobe.livecycle.signatures.client.types.exceptions.PDFOperationException: ALC-DSS-303-001 Could not sign Signature Field MyField (in the operation : sign)
Caused By: ALC-DSS-303-014 Subject name and the subject alt name missing. (in the operation : getSignerName)
My source code is a straight copy/paste from the SDK Help. I can successfully add an unsigned signature field using API call, but I can't sign it. I can also sign my document manually from Adobe Acrobat Professional using the same certificate.
I'm new in LiveCycle and digital signatures, so it might be some obvious reason that I just can't detect now.
Could anyone help me, please?

you can mail me directly to [email protected], and I'll try to help.
no guarenty :-)
Tal
[email protected]

Error while executing BPEL xpath extension function : doXSLTransformForDoc

Hi All,
I have used the transform activity in BPEL that uses 2 input variable and one target variable and process gets complied successfully. However, when the is deployed on the SOA server and tested then I get the following error :
=======================================================================
<faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc('file:/C:/JDeveloper/mywork/xsl/tranform_02.xsl',bpws:getVariableData('ListOfInterestVariable'),'receiveInput_Consume_Message_InputVariable.body',bpws:getVariableData('receiveInput_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: internal xpath error.
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
</summary>
</part><part name="code"><code>XPathExecutionError</code>
</part></subLanguageExecutionFault>
========================================================================
Please suggest
Thanks.

That is because the bpel file contains the absolute path to the xsl file instead of the relative path.
ora:doXSLTransformForDoc('file:/C:/JDeveloper/mywork/xsl/tranform_02.xsl' .....
should be
ora:doXSLTransformForDoc('xsl/tranform_02.xsl' .....
As far as I know, this is a bug in JDeveloper for putting this information here. I've removed it using the source view only to find it there again.

Error while installing Microsoft Identity Extensions Setup during installation of SharePoint Foundation 2013 on Windows Server 2012

Hi All,
When i try to manually (no internet connection on the server) install SharePoint 2013 Prerequisites on Windows Server 2012 I get the below error
I have installed .Net Framework 3.5, 4.0 and Windows Identity Foundation using Add server roles or features from the server manager.
From Software & Hardware requirements for SharePoint 2013 give
Prerequisites for SharePoint 2013 I can see that the identity extensions are available only of Windows Server 2008 R2 and not for windows server 2012. Can you please provide the link for windows server 2012?
I have installed all the prerequisites required except Microsoft Identity Extensions.
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

I fixed it by installing Microsoft Identity extensions from command line, please find command line below.
C:\Windows\System32>msiexec.exe /i "C:\SharePoint2013ServerFiles\prerequisiteinstallerfiles\MicrosoftIdentityExtensions-64.msi" /quiet /norestart
Note: In the above command C:\SharePoint2013ServerFiles\prerequisiteinsTallerfiles is the path where I had downloaded all the prerequisites for SP2013
This will install Microsoft Identity Extensions and creates registry entries, which will help the SharePoint 2013 Prerequisite installer to complete the setup
For more details check out
here
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Internal Server Error while using Frontpage Server Extension on SharePoint2013

I am working on a Proof of concept where I am trying to use Frontpage server Extension - RPC protocol to upload the files in sharepoint document library using "/_vti_bin/_vti_aut/author.dll". I am using following URL to upload bytes to SharePoint
Document library.
http://SPServer/Site/_vti_bin/_vti_aut/author.dll?method={0}&service_name=put+document&document=[document_name=<Encoded document path>;meta_info=[]]&put_option=overwrite,migrationsemantics&keep_checked_out=false&comment=
The same code works on one sharepoint environment but not on other. I am getting Internal Server Error (500) exactly when i try to execute the webrequest.GetResponse for the url given above.
Any pointers will be greatly appretiated.
Regards,
Indra

Hi,
According to your description, my understanding is that when you use the Front Server Extension to upload the files, it occur the error "Internal Server Error(500)".
As in your another environment, it works fine, for a better troubleshooting, I suggest you can do as the followings:
1. Using Fiddler to check the web request which occurs error to find the detailed error message and you can compare if there are something difference between the two environments.
2. Check the Windows server event log to check if there are something error message in it.
Here is a detailed article about troubleshooting solutions:
how to solve Web Service call failed error
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while signing in SOAP receiver channel

Hi,
I have a Source PI which is sending a XML message to a target PI through SOAP adapter. Its a secure commnication. I am using message level encryption and signing on the source receiver agreement and message level decryption and validation on target sender agreement. The message is failing in the SOAP receiver cahnnel on source PI with the below error message. Also, I am using a certificate which is signed by Verisign and its valid for two years. I have checked the validity, it has not expired yet.
It works fine if the certificate is signed by SAP(that is, test certificate which is valid for 8 weeks).
Error Message
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: verify( Message, byte[], CPALookupObject ). Message: SecurityException in method: verify( Message, byte[], CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: verify( Message, byte[], CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.). at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:996) at sun.reflect.GeneratedMethodAccessor546_10002.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy2684_10002.process(Unknown Source) at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:275) at

Hi,
as per the error message is:
"... The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.) ..."
I guess the cert. setup either on your side or the other system's side is not fully correct. Check whether all cert., priv keys and public keys are exchanged propperly and setup as trusted certs.
Regards,
Kai
Edited by: Kai Lerch-Baier on Jul 9, 2009 1:24 PM

Error while signing a Photoshop extension

Similar Messages

Maybe you are looking for