AutoInstall problems in Windows XP SP3 + IE8

I'm trying to autoinstall the JVM from a cab file using an OBJECT tag, but I have problems when I try in Windows XP SP3 + IE8.
My code is the following:
<OBJECT id="appletComprobarSoftware"
     classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
     codebase="http://java.sun.com/update/1.6.0/jinstall-6u15-windows-i586.cab">
</OBJECT>
If Java is already installed in the machine, the JVM installs correctly in the browser but, if it is not installed and it is downloaded, when the installation finishes, the browser turns into "no response" state and I must close it.
So if I try to execute an applet, using the code below, and java is downloaded because it is not installed in the machine, the applet will never execute since after java installation the browser must be closed.
<OBJECT id="appletComprobarSoftware"
          classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
          codebase="https://java.sun.com/update/1.6.0/jinstall-6u13-windows-i586.cab">
          <PARAM name="code" value="es.spee.arq.pub.firmadigital.DummyApplet.class">
          <PARAM name="archive" value="DummyApplet.jar">
</OBJECT>
I have tried with several java versions and the results are always the same, but the same code in Windows Vista or Windows 7 + IE8 works perfectly.
Do you know what is the problem and how to solve it??
Thank you very much.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Similar Messages

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Can't use at all on Windows XP SP3, IE8

Hello,
The last version what I used was 6.1.999.130. I have this problem for a month. When I try to login using my old MSN login it says "Sorry, we didn't recognize your sign-in details".
The last version crashes after the launch.
Windows XP SP3 32bit
Internet Explorer 8.0.6001.18702
I spent a month to solve this problem but I couldn't. I installed several versions and all of them was crashed except the version what I mentioned above although it throws a login error. I reinstalled SP3 too.
Solved!
Go to Solution.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Paravirtualized Driver problem with Windows XP SP3

Hi,
While trying to install Oracle PV block dirvers to a fresh Windows XP SP3 system in Oracle VM 2.1.5 I get a blue screen of death. Any advice on how to overcome the problem would be greatly appreciated.
Best regards,
V.B.

Hi, rlomba
Thank you for your reply.
Of course I know about .Net and netfront. Moreover, I have successfully installed Win Server 2k3 as PV.
I think the problem is a bit deaper. When I skip block device I can proceed with installation, however on reboot Oracle PCI (SCSI-?), and network drivers fail to start.
A more generic question: did anybody succeed with installing Oracle PV drivers to XP? What SP was it?
Thanks in advance

HP Pavilion dv7-1250en Audio Driver problem for Windows XP SP3 x86

Hi. I have installed Windows XP SP3 in HP Pavilion dv7-1250en and has found all drivers except Audio Driver for Windows XP SP3 32-bit.
Everest found 2 Audio device
1) IDT 92HD71B7 @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
2) nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
Please help.
Thanks in advance.

Try sp41693
IDT High-Definition Audio CODEC Driver,
sp41693, vista driver, reported work in XP here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Have windows Xp-SP3/IE8. Have trouble in installing 11.1.102.62 .Any suggestions please

Have windows Xp/SP-3/IE8. Have problem in installing 11.1.102.62. Would appreciate suggestions to resolve the problem.

Hi,
I tried to download from the link. It didn't work. It said ActiveX control for Flash Player could not be registered; please visit the following link for troubleshooting tips:
Troubleshoot Flash Player for windows
Apart from that nothing else was available. I wait to hear from you further with your remedies.
Regards
[private information removed]

Problem installing Windows XP SP3 using bootcamp

Everything was working fine up to when i started installing Windows. I got the windows from my school and burned it onto a disc. It recognized it and the computer restarted and started to install, but then it stopped. The last few lines are
Caldera Dr-Dos 7.03
Copyright......
[Dr-Dos] A:\>
I cant type anything at all and right now I just want it to work or to get it out of my macbook pro. any suggestions?

The Mountain Lion Windows Support drivers are available from within Boot Camp Assistant as a download. Start Boot Camp Assistant and select the option to download the Windows Support Software. Follow the instructions for saving the downloaded support software. When you boot into Windows make sure the device containing the drivers is inserted into a usb port and your Windows dvd is not in the computer. Windows will boot from your installed Windows on your hard drive and it will install the support software from the usb tick.
You should visit the Boot Camp forum where installing Windows and the Windows Support Software is explained in hundreds of posts.
https://discussions.apple.com/community/windows_software/boot_camp
And here is the Boot Camp help files in case you were unable to find them.
http://www.apple.com/support/bootcamp/

Skype 6.20 Windows XP SP3 crashes at launch

I upgraded from Skype 6.old to 6.20 because I couldn't log in. Now, whenever it starts it immediately pops up a crash "Skype has encountered a problem and needs to close.".
I have the latest updates for Windows XP SP3, no firewall, and AVG Free virus scanner that only complains about 'tracking' cookies.
I also tried installing skype 6.13, which I had floating on another computer, but that has the same crash as skype 6.20.
Curiously though, as long as I don't close the crash dialog, Skype appears to work normally and I can use every feature, including webcams.
The report in the event viewer is as follows:
Spoiler (Highlight to read)
Event Type:   Error
Event Source:   Application Error
Event Category:   None
Event ID:   1000
Date:       2014-09-28
Time:       11:45:56
User:       N/A
Computer:   ZOM-B-LAPTOP
Description:
Faulting application skype.exe, version 6.20.32.104, faulting module skype.exe, version 6.20.32.104, fault address 0x00c079fe.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data&colon;
0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 796b7320 652e6570 36206578
0020: 2e30322e 312e3233 69203430 6b73206e
0030: 2e657079 20657865 30322e36 2e32332e
0040: 20343031 6f207461 ****************
0050: 39373063 0a0d6566
Event Type:   ErrorEvent Source:   Application ErrorEvent Category:   NoneEvent ID:   1000Date:       2014-09-28Time:       11:45:56User:       N/AComputer:   ZOM-B-LAPTOPDescription:Faulting application skype.exe, version 6.20.32.104, faulting module skype.exe, version 6.20.32.104, fault address 0x00c079fe.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.Data&colon;0000: 6c707041 74616369 206e6f69 6c6961460010: 20657275 796b7320 652e6570 362065780020: 2e30322e 312e3233 69203430 6b73206e0030: 2e657079 20657865 30322e36 2e32332e0040: 20343031 6f207461 ****************0050: 39373063 0a0d6566

dakeyras wrote:
I have the same problem.
Windows XP SP3.
No real-time antivirus but PC scanned periodically, 100% virus free.
No firewall.
Skype worked ok until last month (version 6.5).
Now, I can't connect and I need to update.
Tried all the latest versions: 6.18, 6.19, 6.20.
Skype crashes on startup with a KERNEL32 error message.
If I not confirm the crash report, skype seems to go online, but if I try to send a call or a message it does not work.
I tried for several days: installation, remove, re-installion, clean all the file in "skype" folder, create a new user, reinstallation from the new user, reinstallation IE, reinstallation DirectX, etc.
It is impossible to make it work.
I need it to work and family and now I'm stuck.
Please resolve this problem or let me the permission to use of an old version.
Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Forms problem in Window 7 64 bit

Dear Members
I have installed "Forms [32 Bit] Version 10.1.2.0.2" on Windows 7 64bit. I have the Internet Explorer 9. Now when i run the forms it prompts for download jinit when i try to download it show the error dialog box as under
Jinit.exe
Cannot download this file.
Details:
HTTP/1.1 502 Proxy Error (Forefront TMG denied the specified Uniform
Resource Locator (URL). )
Now i have installed manually JInitiator 1.3.1.26 (32-bit) and also copy the jvm.dll file in the desire folder. When i run the form it shows blank page with broken link.
Please help me to solve this problem.
Thanks & Regards
Edited by: SweetKUR on Aug 9, 2012 12:06 AM
Edited by: SweetKUR on Aug 9, 2012 12:19 AM

This is a common question in the Forum. A simple search of the forum and you would have found that Oracle Developers Suite 10g R2 (version 10.1.2.0.2) is not supported on Windows 7 64-bit. However, you would have also found a couple of threads where people have made this work.
Now i have installed manually JInitiator 1.3.1.26 (32-bit) and also copy the jvm.dll file in the desire folder. Don't do this! This is a complete HACK of the OS and there is no guaruntee that this will work and more importantly this could screw-up your OS.
By default, Forms 10g is configured to use the Oracle Jinitiator because this was the Java Runtime Oracle was using at the time. Now, however, Oracle has changed directions and has adopted the standard Java Runtime. Therefore, you must reconfigure Forms 10g to use the Java Runtime Plug-In (JPI) on Windows 7. With Windows XP you did not need to do this. Take a look at Forms: How to Configure Forms Builder to run forms locally for detailed steps on reconfiguring Forms 10g.
@937097
I had the same problem in my computer, and the guys from systems department solved the problem installing Windows XP SP3.thy triend to install Forms10 with Windows 7 64bits, but they said it can't be done. >
I disagree with your "Systems Department". I have Forms 10g installed and running quite well on Windows 7 Professional 64-bit. There are a few pre-installation steps you must take to install Forms 10g, but it can be done. At the very least, your Systems Department staff could have installed Windows XP Mode for Windows 7. Take a look at:
Windows XP Mode - Windows 7 Features
Install and use Windows XP Mode in Windows 7
Download Windows XP Mode
I've tested Forms 10g with XP Mode and it works fine there as well, but I prefer not to deal with the overhead of the Virtual Machine.
To properly install Forms 10g R2 on Windows 7 you must first have Windows 7 Professional or higher. Then follow these steps:
1. Install Java Runtime 1.6.0_33 (32-bit).
2. Change Windows Virtual Memory from System Managed to a specific amount (2048mb Initial size, 4096mb Max). The Oracle installer can't detect VM settings if they are system managed. You will need to restart your computer after making this change. Once you have completed the installation, you can change the settings back to system managed.
3. Right-Click the setup.exe and select properties. Select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP (Service Pack 3)".
4. Run the installer.
Once complete, review the document I linked above for configuring Forms to run locally from the Forms Builder.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Airport problem with windows SP3

Hello, I have an aluminum 13 inch macbook, and I have problems connecting most wifi connections using my windows side (SP3). My mac OS X side works fine, I can get my home wifi as well as everything else, but on my windows SP3, it is very hard to do so. I am able to connect most unprotected WIFI, and some unprotected ones. Sometimes it also take an insanely long time for it to connect to it.
Any ideas?

If other devices like your iPhone are connecting to the wireless from the AirPort, then you know that the AirPort wireless is working.
You really have a question for HP Support here, but you could start by trying the Windows Troubleshooting Guide.
Wired and wireless network connection problems in Windows ...

SPS224 and Windows XP SP3 802.1x supplicant problem

Hi everybody
We run MS Active Directory based network (Windows Server 2008, MS NPS as RADIUS server) and have Windows XP SP3 and 7 in it. We have a lot of SPS224 (with the latest SW version 1.0.6) as the access switches, and we are trying to implement 802.1x in our network to authenticate users by their AD domain computer accounts. Also, we want to use dynamic VLAN assignment using RADIUS attributes. The authentication by PEAP-MSCHAPv2 works fine on all workstations but we have a problem with the dynamic VLAN assignment in case Windows XP machines are used. The problem is that after a successful authentication and VLAN assignment on a switch port, the Windows XP supplicant is trying to re-authenticate after several seconds. However, the switch port state remains authorized and the workstation does not lose connection. So, the only problem we see is that the state of supplicant does not correspond the switch port state. We have notice that the problem occurs when the "multiple sessions mode" is used (it is needed to enable VLAN assignment by RADIUS attributes). We have tried the built-in Windows XP SP3 supplicant and Cisco Secure Services Client with the similar result. At the same time, the Windows 7 workstation works just fine, without any problems. Is anybody has faced this problem with Windows XP and has a workaround? Any help will be appreciated!

Not exactly sure what could be the problem. It should be working - it's definitely supported (I'm currently typing this via a XP SP3 machine using PEAP WPA2/AES via WZC). The only things I can think of to check are:
- Make sure your wireless drivers are up to date *this is a must*
- Make sure the other supplicant is completely disabled (uninstall it if you really need to rule it out)
- Try disabling the server certificate check in the WZC profile for this network (do you know for sure that your laptop trusts the IAS server's certificate)?
- Are you doing machine or user authentication for PEAP - make sure you have the WZC profile properly configured
- Are you 100% sure that you've configured everything properly for the network (WPA vs WPA2? AES vs. TKIP? etc.)

F-source menu not working with Windows 7 and IE8

This may be completely the wrong place to ask for help, but I could not find place else.
Several years ago I purchased the code from f-source to display an Adobe style flash menu for my website. I installed it and it worked fine.
Recently, I learned that it does not display properly to those using Windows 7 and IE8 (this may have also been happening with Vista). Rather than seeing my menu titles, people see "Button1, Button2, Button3...".
I have sent two messages to f-source support over the past 7 days, but have heard or seen nothing in the way of a response. Can anyone help me to either 1) fix the problem or 2) know whether older f-source code will ever work with the newer browsers.

Do you understand the disadvantages of using Flash for navigation elements? It may be time to re-think this approach....

I can no longer print PDF files that were scanned with the very same MX479 on Windows XP, SP3

I can no longer print PDF files that were scanned with the very same MX479 All-in-One.
I have an (obsolete) Windows XP, SP3 computer. Obviously, no updates from Microsoft
have occurred that might have impacted my Canon Pixma MX479.
When I attempt to send 1 or more pages from a PDF file to the printer, I don't even get the
Canon PIXMA popup that would allow me to cancel the print job.
Yet the Print Queue icon appears in the lower right corner of my monitor.
If I view the Print Queue, the print queue shows "spooling" and does nothing more.
If I attempt to CANCEL the print job in the Print Queue, it simply changes to "deleting -
spooling".
I cannot cancel the print job that shows NOT RESPONDING via Task Manager, either.
In fact, the only way the Print Queue icon disappears is if I totally reboot my computer!
"Luckily", I can still print e-mails, Word documents, and even my downloaded PDF of my
bank statement.
So, I was thinking that it was *only* PIXMA'S OWN SCANNED PDFS that could not be
printed ON THE SAME PIXMA 479.
However, I have since realized that I also cannot print USPS Signature Proof of Delivery
PDFs that I received from USPS via e-mail.
So why can I print *some* PDF files, but not *all* PDF files, like I previously could do?
THESE SCANS ARE OF LEGAL DOCUMENTS, SO I WILL LIKELY HAVE TO E-MAIL
THE REQUISITE, PREVIOUSLY SCANNED PDFS TO FEDEX TO PAY FOR *THEM*
TO PRINT THEM.
NOTE: I *have* tried turning the PIXMA off, unplugging it, rebooting the computer, plugging
the PIXM in and restarting the PIXMA - still no ability to print PIXMA-scanned PDFs.
And, I find it very strange that e-mails, Word documents, and some other PDFs print with
no problem "around" "NOT RESPONDING" PIXMA print jobs.
I have owned Canon printers for years, including the MX420, and the MX340.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

ITunes 10.5.3 Installation on Windows XP SP3: hanging on "Registering iTunes Automation Server"

I have uninstalled successfully iTunes 10.5.1 from my notebook and reinstalled iTunes 10.5.3.3. Unfortunately, in reinstallation process, iTunes is hanging on "Registering iTunes Automation Server" for over 3 hours!!!!!!!! Quicktime, Safari, Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update are all reinstalled successfully!!! WHAT's the problem for my notebook? How to overcome this issue??? Please help me !!!!!!!!!!!!!!!!!!!!
System:Windows XP SP3
Apple iPhone 4S, iPad 2, iPod Classic

Noboday has ideas about this issue???

Itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software

itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software.

Thanks Alex,
I performed all of the steps you suggested and iTunes v-12.1.1 installed correctly.
The problem is, that version of iTunes now does not recognize my HL-DTST DV-DRAM GMA-4082N, CD/DVD DRIVE.
When I insert a CD to rip into my iTunes library nothing happens.
If I click on the properties for that D-drive nothing shows using the Explore function.
If I open Microsoft Media Player v-11.0.5721.5262 I can see all of the tracks on the disk, and the player rips the songs to the Microsoft Media Player library which I can then play.
I then reinstalled VLC media player v-2.1.5, and was able to play cd's and watch DVD's. When I performed that install I again received the iTunes banner:
Earlier versions of iTunes worked just fine:
iTunes v-11.4 (32-bit) 10 September, 2014, (6 months ago), size: [106.11 MB], for Windows XP SP3 worked on this same Toshiba laptop.
The latest version: iTunes v-12.1.1 seems to want to be the only piece of software allowed on the 32 Bit XP system.
To me, it looks like Apple does not want any other applications running on this system. Not very thoughtful for customers that cannot afford to purchase more expensive computers when they are on a fixed income. I have been a long time user of Apple equipment when employed by Motorola, development engineering.in my younger years.
Is there any way to get the earlier versions of iTunes back on this laptop?
Thanks,
Jay

AutoInstall problems in Windows XP SP3 + IE8

Similar Messages

Maybe you are looking for