Automate a Send (or a Bus)?

What is the easiest way to select a CHANNEL SEND as an automation parameter in a track, and be able to toggle the send on and off during automation?

Keep in mind, you can always automate the mute of the Aux track the FX is inserted on. This would amount to the same thing.
But if you did need to mute or bypass just an individual track (if other tracks were still needing the effect, for instance), Sampleconstruct's method is the one to use. It's quite easy to do, and by adding 4 automation nodes (via a key command), and then pulling up the middle two nodes, you are essentially writing an "On/Off" command, even though you are technically automating the sends volume.
But because you didn't actually automate the send knob by turning it, there is no "ramp", so the volume goes from null to full level instantaneously.
Hope that made sense...

Similar Messages

  • How can I have the title of the document be in the email subject line automatically when sending?

    How can I have the title of the document be in the email subject line automatically when sending?

    It can be done if you use a script, like this one:
    this.mailDoc({cTo: "[email protected]", cSubject: this.title});

  • IDOC - Automatic Mail Sending

    Hi All,
    Basically I need to remove the automatic mail sending feature in the IDOC, please give me the solution, whether  it is standard functionality, or is there any user exit to avoid.
    If it is a Standard functionality then mention the Std. Program name or
    If it is from userexit then plz mention the Exit name.
    Thanks In Advance.

    think u need to check tcode swu3 for automatic workflow customizing and check in we40 (error AND STATUS PROCESSING) whether the processing code is assigned to the workflow task.
    if it is assigned,the workflow will be automatically triggered and the mail will be sent to the user by itself.
    ALE error handling uses workflow. A standard task is provided for each message type. Task TS20000051 is used for all BAPIs.
    Workflow functions as follows:
    A task (work item) is generated for the error handling and stored as a message in the inboxes of the employees responsible.
    If one of these employees processes the work item, the standard task method for error handling is started. The user can, for example, restart IDoc processing.
    If the IDoc is processed successfully, the work item is deleted from the inboxes of all the employees involved.
    For this procedure to function, the employees responsible for a particular message type and partner (sender or receiver) must be defined as follows:
    1. A hierarchy of organizational units (for example, "sales office") and positions (for example, "customer officer for customer X") is created and employees are assigned to it.
    2. The standard tasks for error handling (for example, an error related to an inbound sales order) are assigned to the relevant organizational units or positions (for example, "sales office").
    3. The organizational unit, position or employee responsible for dealing with the error are specified for each partner and message type in the partner profiles.
    If an error occurs, the system determines:
    1. The employees responsible using the staffing schedule of the organizational unit or position linked to the standard task.
    2. The employees defined in the partner profiles (using position, user ID, or organizational unit).
    3. The employees appearing in both groups represent those who will receive a work item in their inboxes.
    Please give me reward point If it is useful
    Thanks
    Murali Poli

  • Automatic Mail Sending in Java/JSP/Servlets

    Hi,
    How to send mails with a specified format automatically after a stipulated no of days when the user does not access a file/page.
    TIA

    1. In your web application, have a database that keeps track of when a user accesses a page.
    2. Once a day, run a program that scans that database looking for cases when a user has not accessed a page for N days, or whatever your criterion is. Use JavaMail to send an e-mail message to each of those users.
    If you have specific questions about any of these things, don't hesitate to ask them in the appropriate forum.

  • Clipping but sending to a bus

    I have a whole load of drum sounds on different channels with 1 channel clipping like crazy. I have bussed all the individual channels into one and then on the same channel pulled the level down a bit (so the all the combined sounds are not clipping).
    My question is: When i send audio that is clipping to a buss that is not clipping is this OK or is the sound still being damaged?

    When i send audio that is clipping to a buss that is not clipping is this OK or is the sound still being damaged?
    Let's get our terminology straight...
    When you say "clipping", relating to a bus, or playing back an audio track with plugins on, I assume you actually mean the channel is going into the red bit of the meters. This would be clipping in a fixed point system, but is not clipping in a floating point system. Your audio is not being clipped.
    It's just the meters are displayed like that as a guide to help people stay in control of their levels.
    So yes, in most (1) cases, it's perfectly fine to have individual mixer channels or busses going over the 16-bit 0dBFS point, even though no one would really recommend the practice
    Your audio is not being destroyed. The only place it's *absolutely vital* you don't clip (2) is the output channels - in this case, trying to go over the 0dBFS fixed point will clip your audio, either on the bounced file, or via your audio interface playback.
    (1) This is really dependant on whether you have plugins that do not process floating point signals, but used a fixed point I/O for audio. Most do it "correctly" but some stil use fixed point - in these cases, you can clip audio be using levels higher than the 0dBFS fixed point.
    (2) I'm not dealing with recording either - of course, if you clip your input preamps, you are clipping on the way in - but this isn't what we are talking about here.

  • Code to automatically sms send and receive by sql server

    I want you to tell me the necessary code in vb and sql to automatically send and receive sms from sql database.i know only that i have to create one table for it in the database.please anybody who knows post the code for me.

    Hi mintesnot h.benti,
    According to your description, since the issue regards VB code, as other post, you need to post the related problem on Visual Basic forum at
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral. It is appropriate and more experts will assist you.
    In addition, if you want to use a SQL Server database, and it makes SMS sending and receiving possible through database tables in your VB.NET application. You may need to use the 3<sup>rd</sup> tools, such as OZEKI NG SMS Gateway or others.
    http://www.ozekisms.com/php-sms-api-asp-sms-A/index.php?owpn=586&sms_gateway=sms_VB.NET_database_sms_example_guide
    Note: Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality,
    safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and please be cautious and ensure you have completely understood the risk before retrieving any software from the
    Internet.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Applescript Help - Automatic Email Send to Group

    Hey guys,
    Me again. Ok, so I am starting to get the hang of this, learning more and more on applescripting. You guys have been a great help.
    Now, I have a little applscript that I want to send an email automatically to a Group in my address book. However for the life of me, I can't figure out how to do that! Or is this just not possible? Please advise!
    Here it is:
    set theToRecipient to "My group" -- this would be the group name of email addresses that is in my address book
    set theSubject to "The subject of the message"
    set theContent to "the content of my message."
    tell application "Mail"
      activate
              set newMessage to make new outgoing message with properties {subject:theSubject, content:theContent, visible:true}
              tell newMessage
      make new to recipient at end with properties {address:theToRecipient}
      send newMessage
              end tell
    end tell
    Appreciate all your help.

    Try this --
    set theToRecipient to {}
    tell application "Address Book"
              if group "MyGroup" exists then
                             set theToRecipient to "MyGroup"
              end if
    end tell
    set theSubject to "The subject of the message"
    set theContent to "the content of my message."
    tell application "Mail"
      activate
              set newMessage to make new outgoing message with properties {subject:theSubject, content:theContent, visible:true}
              tell newMessage
      make new to recipient at end with properties {address:theToRecipient}
      --send newMessage
              end tell
    end tell

  • Automatic email send for new Blog or News item posts?

    Is there a way to send and automatic email to mailing lists when a Blog entry is posted (or, better yet, a News post)?

    Not within the system but you should be able to use Mailchimp's RSS to Email feature to do this automatically. http://mailchimp.com/features/rss-to-email/
    Having said that, if you don't have sufficient data from the RSS, you could use something like Kimono Labs to create your own RSS with the preferred data kimono : Learn

  • Automatic email sending

    Hi everybody! I created an hotmail account and use it on mail. Everyday my Mac sends automatic emails to my contacts with publicity of a site who sells Apple products. I've never seen that website before, so I don't understand why that happens....can you help me?
    Thanx a lot!

    Sounds like your Hotmail account has probably been hacked. Change your Hotmail password immediately. If that doesn't fix the problem, it's quite rare but possible for you to have some malware on your Mac that may behave this way... try a scan with [ClamXav|http://www.clamxav.com>.

  • Plz help : "AUTOMATIC" Mail sending

    Hey Friends
    Please see the word "automatic", as soon as user enters a good receipt in MB01 or MIGO, an automatic mail should be send to [email protected] stating:
    Material # XXXX quantity XXX has been received into Plant XXXX (field WERKS) Storage Location XXXX (field LGORT) and the date received in.
    Please tell me how to do this as automatic.
    i have found that data is stored in the MSEG table, but how to use it so that and automatic mail is send.
    Thanks

    Hi,
    To send an email please use this sample code:
    * Declarations.
    PARAMETERS: p_email(50) LOWER CASE.
    DATA: document_data LIKE sodocchgi1.
    DATA: t_content LIKE STANDARD TABLE OF solisti1.
    DATA: s_content LIKE solisti1.
    DATA: t_receivers LIKE STANDARD TABLE OF somlreci1.
    DATA: s_receivers LIKE somlreci1.
    START-OF-SELECTION.
    * Receivers.
    s_receivers-receiver = p_email.
    s_receivers-rec_type = 'U'.
    s_receivers-express = 'X'.
    APPEND s_receivers TO t_receivers.
    * Subject
    document_data-obj_descr = 'New mail from Sap'.
    * Body
    s_content = 'Hi,'.
    APPEND s_content TO t_content.
    CLEAR: s_content.
    APPEND s_content TO t_content.
    s_content = 'Test email from sap, please don''t reply to this email'.
    APPEND s_content TO t_content.
    CLEAR: s_content.
    APPEND s_content TO t_content.
    s_content = 'Thanks,'.
    APPEND s_content TO t_content.
    s_content = 'Naren.'.
    APPEND s_content TO t_content.
    * Send the email.
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
    document_data = document_data
    TABLES
    object_content = t_content
    receivers = t_receivers
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    IF sy-subrc <> 0.
    MESSAGE e208(00) WITH 'Error in sending email :-(('.
    ELSE.
    MESSAGE s208(00) WITH 'Email sent :-))'.
    ENDIF.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
    In order to do it automaticly either:
    - create program which will read a table and look for new entries and schedule it SM36
    - use workflow (configure event handling)
    Regards,
    Wojciech

  • N97 mini restarts automatically when sending messa...

    I am having problem with my n97 mini. Sometime it restarts (soft resart) automatically. many times it happens only when i send message or some time when flap is opened or closed. Is anybdy facing the same problem?

    Most likely a simple software issue. Make a backup of your personal data using Ovi Suite, then perform a software update (if you already have the latest version, it will be reinstalled).
    Restarts often happen if there is an issue with a particular app, in your case apparently the messaging app. It is a bit like when a program stops responding in Windows.

  • Automatic mail sending at good receipt

    Hello friends
    When a goods receipt against a PO (movement type 101) is done into any plant , an e-mail should be sent to ‘[email protected] ’ stating:
    Material # XXXX quantity XXX has been received into Plant XXXX (field WERKS) Storage Location XXXX (field LGORT) and the date received in.
    Plz suggest how to do this.
    what are the tables that can be used
    wat are the fms that can be used etc
    where this can be configuered,, or done thru ABAP

    Hi,
    1.create an enhancement project using enhancement number:MBCF0005..
    in CMOD and in the below fuction module exit you can add you logic to send the mail.
    <b>EXIT_SAPM07DR_001.</b> in INCLUDE ZXMBCU05 .
    2.you can get all the required data in the MSEG table.
    3. you can use the following fuction module to send the email.
    'SO_NEW_DOCUMENT_ATT_SEND_API1'
    below is the sample code..
    REPORT ZPAVAN_EXAMPLE.
    DATA: OBJPACK     LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          OBJHEAD     LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          OBJBINLIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          OBJTXTLIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          RECLISTLIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
          DOC_CHNGLIKE SODOCCHGI1,
          TAB_LINES LIKE SY-TABIX.
    PARAMETER P_EADDR LIKE RECLIST-RECEIVER.    "EXTERNAL E-MAIL ADDRESS
    DOC_CHNG-OBJ_NAME = 'SENDFILE'.
    DOC_CHNG-OBJ_DESCR = 'SEND EXTERNAL MAIL'.
    OBJTXT = 'LINE 1 OF MESSAGE'.
    APPEND OBJTXT.
    OBJTXT = 'LINE 2 OF MESSAGE'.
    APPEND OBJTXT.
    DESCRIBE TABLE OBJTXT LINES TAB_LINES.
    READ TABLE OBJTXT INDEX TAB_LINES.
    DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
    CLEAR OBJPACK-TRANSF_BIN.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 0.
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM = TAB_LINES.
    OBJPACK-DOC_TYPE = 'RAW'.
    APPEND OBJPACK.
    RECLIST-RECEIVER = P_EADDR.
    RECLIST-REC_TYPE = 'U'.
    APPEND RECLIST.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              DOCUMENT_DATA              = DOC_CHNG
              PUT_IN_OUTBOX              = 'X'
         TABLES
              PACKING_LIST               = OBJPACK
              OBJECT_HEADER              = OBJHEAD
              CONTENTS_BIN               = OBJBIN
              CONTENTS_TXT               = OBJTXT
              RECEIVERS                  = RECLIST
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
              DOCUMENT_NOT_SENT          = 2
              OPERATION_NO_AUTHORIZATION = 3
              OTHERS                     = 4.
    IF SY-SUBRC EQ 0.
      WRITE:/ 'E-MAIL MESSAGE SENT TO', P_EADDR.
    ELSE.
      WRITE:/ 'COULD NOT SEND E-MAIL TO', P_EADDR.
    ENDIF.
    thanks and Regards,
    Pavankumar

  • Automatic mail sending freezes outlook 2013

    I have a brand new laptop with fresh installation of Office Home and Business 2013, and there is a problem i can't wrap my head around it.
    User takes his laptop home, writes 10+ mails and sends them, they lay down in outbox till tomorrow, where he comes to work, connects to network and then problems start to arise.
    Mails and attachments never exceed more than 1 or 2 mb's and its usually one at that size...
    Problem; user connects laptop to network and Outlook freezes for 15-30 minutes, later on unfreezes and mails are sent (it is sending them in freezed period), after that everything works just fine..
    I have reinstalled office, removed profile, checked for plugins there are none, problem still not resolved.
    Anyone has any idea?

    So no one has any idea, or maybe i used bad english, if so please ask i will clarify if missed something

  • Automatic Replies: Sender vs ReplyTo Email Address

    I receive email from: [email protected] There is a corresponding reply-to email address: [email protected]
    When manually replying to the email, the recipient field is populated with the reply-to address: [email protected] as expected. However, Automatic replies are sent to [email protected] instead of [email protected]
    How can Automatic replies be customized to use the reply-to email address?

    I would say to create server rule in your outlook to forward the email to [email protected] when email is delivered to [email protected]
    This makes all your emails will move sent to [email protected] instead of [email protected]
    Exchange Queries

  • Automatic Email sending from SAP B1

    Hi All,
    I want to send one query result to particular email id on fix interval say daily at 10:00 AM.
    I have tried it through Alert but to my surprise it didn't send the external mail, where as the internal message works fine.
    What could be the reason of SAP B1 not sending the email ?
    TIA
    Hari Narayan

    Hi Jennifer Anderson ,
    I have configured Outlook Integration and now i am able to send the mails to any id(external or Internal) through send message window. But i want to do this through DI API. I am using message object but while I am sending the mail its asking for the USER code and Name. But the thing is that I want to send the mails to the external ids. Is it possible to send the mails to the nonuser like cutomers, vendors' ids. Is there any other way or object with the help of that I can send the external mails.

Maybe you are looking for