Automate the set regarding option in CRM 2013 in Outlook?

Is there a way to configure the Outlook add-in for CRM 2013 to automatically set regarding on incoming emails, to the parent account, from contacts who are already in CRM? Customer is asking for automated regarding, not just tracking.
Thank you!
June

Did you ever find a solution to this issue? I have seen this in a development environment as well.

Similar Messages

HT4623 I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

Where is the "setting mouse options" toolbar in 5.5?

I just upgraded from Captivate 4.0 to 5.5. I used the "setting mouse options" toolbar in 4.0 all the time but I can't find it in 5.5. Am I able to turn it on in 5.5? I'm looking for a way of telling at a glance if a slide has mouse sound on it or not. Is this still in 5.5?

LOL, only you can truly decide if any upgrade of any software is "worth it".
Indeed, Captivate 5 and 5.5 are advancements in some areas and a return to the dark ages for other areas. So is the nature of upgrades, eh?
All I can do is to suggest you file a Wish Form to advise Adobe that you found the option useful and to vote for bringing it back. I say "vote" intentionally, because using the Wish Form it is actually a voting system. The more of these they see requesting a specific feature, the higher the odds that the request will eventually be taken seriously.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Re:- iPad wallpaper bug, the set both option seems faulty also?

Has anyone (apart from resize bug)also detected a bug with set both option in wallpaper ?

I have same problem on my iphone 5s ios 8.1

When is the error regarding option changes being reset going to be fixed?

I keep getting an error message that there have been changes to the options detected and do I want to allow this. No matter how I answer the default opening pages are erased. I do not have babylon installed. I have reinstalled Firefox 17 three times and the problem still occurs. I have done everything I have been able to find in the help to cure the problem. I have reset Firefox almost daily and that hasn't helped either.
What do I do?
Norman

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try some of the following programs to scan for malware:
* [http://www.malwarebytes.org/mbam.php MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://windows.microsoft.com/MSE Microsoft Security Essentials] (A good permanent anti-virus if you don't already have one)
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!
If it is a search engine in the search bar, see the [https://support.mozilla.org/en-US/kb/search-bar-easily-choose-your-search-engine Search bar - Easily choose your favorite search engine] article for details of how to remove a search engine.
If you have the Babylon Toolbar, follow the procedure in the [https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons Disable or remove Add-ons] article, in particular the section on uninstalling extensions and themes

Automate the set of patches in the software update group

Up until now, we have been creating new software update groups for each Patch we are doing with Config Manager 2012 sp1.   For instance every weekend we are pushing out patches to workstations.   These are Windows 7, 8 and 8.1 updates.
After synchronizing the latest software updates in COnfig manager, we pull up our saved search and highlight all the updates and add them to a software update group.   We then deploy this software update group to a device collection.
Is there anyway to avoid this step of updating the software update group with the list of patches to go out that week.   This seems to be a manual step each time.
Thanks
Lance
Thanks Lance

More info:
Operations and Maintenance for Software Updates in Configuration Manager
http://technet.microsoft.com/en-us/library/gg712304.aspx#BKMK_AutoDeploy
System Center 2012 Configuration Manager Best Practices
http://social.technet.microsoft.com/wiki/contents/articles/11215.system-center-2012-configuration-manager-best-practices.aspx#Best_Practices_for_Software_Updates
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CRM Outlook Client - Set regarding throws an error

When I switch from the Account entity to other entities in the Set Regarding (Look Up Record) I get an error:
An error has occurred. Try this action again. If the problem continues, check the Microsoft Dynamics CRM Community for solutions or contact your organization's Microsoft Dynamics CRM Administrator. Finally, you can contact Microsoft Support.
It´s in a CRM 2011 UR 18 environment + Outlook 2010/2013. This error happens to all users even though I tried given a test user a system admin privileges.
The script error I get is this:
   <Message>Unable to get property 'Success' of undefined or null reference</Message>
   <Line>670</Line>
   <URL>/_controls/lookup/lookupinfo.aspx?LookupStyle=single&browse=0&enableRemoveBtn=1&objecttypes=1%2c2%2c3%2c112%2c1010%2c4402%2c10000%2c10014</URL>
   <PageURL>/_controls/lookup/lookupinfo.aspx?LookupStyle=single&browse=0&enableRemoveBtn=1&objecttypes=1%2c2%2c3%2c112%2c1010%2c4402%2c10000%2c10014</PageURL>
   <Function>anonymousr:Unabletogetproperty'Success'ofundefinedornullreference</Function>
   <CallStack>
    <Function>anonymousr:Unabletogetproperty'Success'ofundefinedornullreference</Function>
   </CallStack>
I´ve tried trace logs on the server without much help + Diagnostics for Outlook give similar results as the script error above.
Has anybody encountered this error before or similar?
Regards,
Ragnar

Hi Ragnar,
Can you verify that the version of the Outlook plugin you have is 5.0.9690.4376? This is the version for UR 18:
http://support2.microsoft.com/kb/2958724
If not, please download and uninstall your current version of the Outlook plugin, and reinstall with this version:
http://www.microsoft.com/en-us/download/details.aspx?id=44265

How to automate the preflight option.

I need to automate the "Advanced->preflight" option through any software. Kindly advice me.

Hi there.
Having the exactly same problem.
Company bought Adobe Acrobat 9 PRO - version 9.4.3
I open PDF, i try to save as PDF/A or PDF/X, then a message appears:
The document has been saved, however, it could not be converted according to the selected standard profile: Convert to PDF/X. Please use Preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compilant to this profile.
Soo I guess we are one of those ten of thousands users that this just does not work.
I would also like to use this posting reply as a chance to ask is there I way we could automate the procedure after we find out why saving in PDF/A format is not working? As a some kind of batch tool procedure, where you would select all the PDF files and convert them to PDF/A ?

Disable Edit Report Option from SharePoint 2013 PowerView Dasboard

Hi All,
I have PowerView Dashboard in Sharepoint 2013, In a Preview Bar there are three options i.e. File, Edit Report, Full Screen.
The requirement is disable only Edit Report Option from preview bar not all.
Please help me if there is any possibility for the same.

Hi,
Based on your description, you want to disable the edit report option from SharePoint 2013 PowerView Dasboard.
There is a workaround:
You can change the permission of the report. You should upload the report to a SharePoint library and set a user have read-only permission of the report. When the user open the report and save the changes, it will have error. The user cannot edit the report.
The article below is about change the report permission in order to disable the edit option.
http://parasdoshi.com/2013/10/30/a-note-about-edit-report-button-seen-on-power-view-in-sharepoint/
Best regards
Sara Fan
TechNet Community Support

MS Dynamics CRM 2013 install via GPO

Good Morning,
I need to rollout MS Dynamics CRM 2013 to all 180 of my users. I would like to do this via GPO but I only have the .exe install files and no .msi files. I have adhered to the following -
http://technet.microsoft.com/en-us/library/hh699775.aspx
I have followed the steps under the section Create the CRMCLient_bitversion.msi file
but I am not achieving any administrative installation files. For example I have a network share setup as follows -
\\server\crm_files\test
I have mapped a network folder via command prompt using the net use command to map the Z: drive to
\\server\crm_files. As per the instructions I have run the following command -
CRM2013-Client-ENU-i386.exe /a /q /targetdir \\server\crm_files\test
When I run this command I am prompted to click Run or Cancel so I click Run. After 2-3 seconds I then get a dialog box showing the different switches that I can run with the only other option being to close the box. After closing the box I look in my
test folder and it is empty.
Should there be something in the test folder? Have I run the wrong command string?
EDIT: Please note that I only have the installation/.exe file for CRM 2013. The article on the link I posted earlier mentions an XML file that is included with the installation files. I do not have this XML file.
Jeet S

Hi,
Have you checked this article?
Install Microsoft Dynamics CRM for Outlook using a command prompt
==============
CRM2013-Client-ENU-i386.exe /a /q /targetdir \\server\crm_files\test
The command here is not in the right way, we need first to extract files from the
CRM2013-Client-ENU-i386.exe, under the folder we will find the
SetupClient.exe and the mentioned XML files.
Run this command to extract the file:
CRM2013-Client-ENU-i386.exe /extract
Then use the command below to create an MSI file:
Setupclient /Q /A /targetdir "\\share\mscrm_client_admin"
Besides, for Microsoft Dynamics CRM 2013 deployment, we'd better ask in the forum below:
Microsoft Dynamics CRM Forum
http://community.dynamics.com/crm/f/117.aspx?pi49901=0
Best regards
Michael Shao
TechNet Community Support

Best logging option for SharePoint 2013 on-premise application

What is the best logging option for SharePoint 2013 on-premise application?

Hi,
According to your post, my understanding is that you want to know the logging option in SharePoint 2013.
SharePoint has its own logging system called “Unified Logging System (ULS)“, we can use the ULS log to see if anything unexpected occurred, we can use the
ULSViewer for more convenient log viewing experience.
Or we can log information programmatically.
There are some logging classes can be used, such as
SPMonitoredScope , SPDiagnosticsService, or create your own “Diagnostics Service” – which is technically just a new class inherited
from SPDiagnosticsServiceBase.
We can also utilize diagnostics.asmx web service for the client side applications.
For more reference:
http://www.codeproject.com/Articles/620996/Five-suggestions-to-implement-a-better-logging-in
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Microsoft Dynamics CRM 2013 Google Chrome not populating popups working correctly with pop ups.

If incorrect forum, just alert and move. I am having an issue with hosted Microsoft Dynamics 2013 and Google Chrome latest release, 31. This just started with the hosted version of Dynamics CRM 2013, Chrome had been working correctly with
our earlier version of CRM.
When users on latest version of Chrome, 31, login to Dynamics CRM 2013, everything looks fine. Issue is specifically, for sales folks, when they open a client record, and where the client info is located, there is a standard date and time and tiny
little calendar you can pull up if you click on it. When the user clicks on the tiny little calendar, they DO get a pop up, but the pop up is blank. And, there is no error message at all. Nothing freezes, nothing bad happens at all, except
for the salesperson, who live and die by their calendars and ability to schedule appointments and see exiting appointments.
This is not some in house coding issue. It is a generic CRM phone call record that has this issue.
Again, no errors, nothing crashes, but Dynamics CRM 2013 is useless to Google Chrome users in house because of this. Which, in a support position, is terrible. Users who got an upgrade, have their favorite interface rendered useless. And these
are sales folks. And, I did all settings according to what I was able to find for CRM 2010 and Chrome, for when pop ups do not work, and all settings were already correct for pop ups, website is in trusted sites, etc, which is what I expected, since
everything worked on CRM 2010.
Any clues or ideas? Thank You.
Rick

We don't know. Better to ask over here.
https://community.dynamics.com/crm/f/117.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

App-V CRM 2013 Outlook Client and Office 2013 Click to Run

Hi,
I'm trying to get going with enbing the CRM 2013 for Outlook client with the VL version of Office Pro Plus 2013. I have successfully published and use Office App-V package in a test environment. App-V version 5.0 SP2 is installed on the client
PC (Windows 7 64bit). SCCM 2012 R2 is used to publish APP-V applications to user groups.
I have sequenced the CRM 2013 Outlook client (offline mode disabled) with UR2 and published it using SCCM as a "Add-on or Plug-in. I've also created a connection group so that the App-V version of Office 2013 is able to connect to the sequenced
CRM client. The client installs successfully, but the CRM tab doesn't appear in the Outlook Ribbon, and the Configuration Wizard crashes each time it is launched. The App-V event log is blank (which I'm taking to be a good sign). All CRM
client prerequisites have been preinstalled on the target PC.
I'm thinking that the CRM client can't see the Outlook application and therefore crashes and doesn't integrate with the Outlook application. Problem Signature 09 (from the crash explanation) states "System.NullReference Exception".
I can't seem to find much out there for sequencing the 2013 version of the client. Has any else managed this yet or have any ideas where I'm going wrong?
Thanks,
Tim

Hello,
I would use Process Monitor to understand what happens and to see why Outlook isn't seeing the plugin, and why the wizard is crashing
Nicke Källén | The Knack| Twitter:
@Znackattack

How to automate the flatten transparency in illustrator?

How to automate the "Flatten Transparency option" in illustrator via javascript. Please share with me.
Thanks

I'm looking for the same thing.
app.executeMenuCommand('Flatten Transparency'); works in CC but all it does is it brings up the window and you still have to click OK to make the script continue.
Before anyone asks why do you want to do it etc. In print thereare instances where you have to open and edit (not text) large numbers of pdfs to change colours, outline fonts etc otherwise there's trouble on print devices.
My script for instance looks for 100K blacks and replaces them with rich black, looks for empty text frames, overprint, bleed settings, clipping paths etc.
The only way to edit successfully a pdf without fonts is to place it and flatten transparency outlining fonts and then work on it.
So back to the point. After the window pops up, is there a way to simulate a keystroke like "Enter" or maybe app.executeMenuCommand('Flatten Transparency'); takes arguments like:
app.executeMenuCommand('Flatten Transparency',preset_name);...?
Anyone? Adobe SDK team? :-)

Install MS CRM 2013 Rollups

Could you please let me know the prerequisites for Installing MS Dynamics CRM 2013 latest Rollup
During early stage of CRM development environment setup, While Installing Rollup, I had corrupted the MS CRM Environment L
Please let me know the steps for installing MS CRM 2013 latest Rollup

Just download and install the rollup. Note that, if you want Crm 2013 service pack 1 installed, then you'll need to install CRM 2013 RTM, then Crm 2013 service pack 1, then the most recent update rollup for Crm 2013 service pack 1. The update rollups for
Crm 2013 RTM are different from those for CRM 2013 service pack 1
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Automate the set regarding option in CRM 2013 in Outlook?

Similar Messages

Maybe you are looking for