Automated Reconciliation report between two cubes
Hi All,
I need to create a query to do reconciliation between two cubes. Please help me to know the steps how I can go ahead.
I have built a multiprovider on top of those cubes. Please let me know what need to be done in query to do reconciliation.
Regards,
Anjali
Hi Anjali,
I am assuming that by reconiliation you mean to check if the data in the two cubes is matching or not. If this is your requirement, then you can create a report in BEX Query designer, in the columns put dataprovider and below that put the keyfigures, and in the row you can put the characteristics for which you would like to reconcile the data for.
Run the report and compare both the columns.
Hope this helps.
Regards
Snehith.
Similar Messages
-
How can i get report between two dates?
Hi
how can i get report between two dates?
for example i want get reports between 20/4/2002 & 27/4/2002.
my table has date column and i can get first date( exam : .... where date:=a and/or ....i don't know this part)
thanks alot.
Regards
The Oracle Reports Team
http://otn.oracle.com/where exam_date between :from_date and :to_date
from_date and to_date are user_parameter -
Display the report between two dates
Hi,
I'm new to this application.i have created two date fields item.i want to display the report between two date fields.please help me.how to do?.
By,
Prem.Prem,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:99
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Sharing report between two business areas?
Hi,
We have two business areas : Sales and Sales with Gross Profits.
Sales with Gross Profits has some columns that Sales business area doesn't have.
Is it possible to share a report between those two business areas if the columns used in the report are the same, without any possible issue?
ThanksHi,
Is it possible to share a report between those two business areas if the columns used in the report are the same, without any possible issue?No, a workbook using items from one or more folders. The folders used by the workbook cannot be easily changed. You could of course have the folders used by the workbook in both business areas, but then you would have 2 versions of the folder in the business area, one with the extra columns and one without.
Rod West -
How to Make a report from two cubes
Hi, guys,
i'm trying to create a report use the data from two different cubes, but that's a problem. what i want to do is like this:
From Cube A, i want to get the total machine number for each type of machine:
Type machine | Total machine
Type A 10000
Type B 15000
Type C 40000
And from Cube B, i want to get the machine amount which has an error, also group by machine type:
Type machine | Broken machine amount
Type A 50
Type B 15
Type C 100
So what can i do to create a report like below:
Type machine | Broken machine amount | Broken machine ratio(%)
Type A 50 0,5
Type B 150 1
Type C 100 0.25
Thanks a lot,Hi, Nicolae, use ur idea, i can get the table u show:
Type | Machine amount | cube
Type A 10000 'cube A'
Type B 15000 'cube A'
Type C 40000 'cube A'
Type A 50 'cube B'
Type B 15 'cube B'
Type C 100 'cube B'
but with this table how can i get the table which i want:
Type | Machine amount | % of machine
Type A 50 0.5
Type B 15 0.1
Type C 100 0.25
I have no idea, 2 things in ur idea have to be considered:
1. just show the record of 'cube B'
2. to get the data that cube B machine amount/ cube A machine amount
Need your detail explain, thanks -
I have a report where I'm using between to select two dates. For example:
select * from empl
where empdate between '1-AUG-04' and '1-SEP-04'
The problem however is that I want to also view any records where the empdate is on the 1-AUG-04 and 1-SEP-04. These records are left out because its looking for records between these dates. I've also tried
select * from empl
where empdate >= '1-AUG-04' and <= '1-SEP-04'
but the problem remains. Is there some way around this problem or do I simply have to make sure the user uses a wider search criteria to catch these records?
thanks,
IanConnected to:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
SQL> select * from emp;
EMPNO EMPNAME DEPTNO SALARY EMPDATE
101 J SMITH 10 3500 02-NOV-04
201 G HUNTER 20 4000 13-OCT-04
301 G WOLF 30 4200 18-OCT-04
102 Y HIA 10 4100 28-OCT-04
202 Y JHUNG 20 3600 08-OCT-04
302 S KUMAR 30 3700 18-SEP-04
6 rows selected.
SQL> select * from emp where trunc(empdate) between '18-SEP-04' and '02-NOV-04';
EMPNO EMPNAME DEPTNO SALARY EMPDATE
101 J SMITH 10 3500 02-NOV-04
201 G HUNTER 20 4000 13-OCT-04
301 G WOLF 30 4200 18-OCT-04
102 Y HIA 10 4100 28-OCT-04
202 Y JHUNG 20 3600 08-OCT-04
302 S KUMAR 30 3700 18-SEP-04
6 rows selected.
But if I do it in Laurent's way (just to write better, It doesn't work:
SQL> select * from emp where empdate >= date '2004-09-18' and empdate < '2004-11-03';
select * from emp where empdate >= date '2004-09-18' and empdate < '2004-11-03'
ERROR at line 1:
ORA-01861: literal does not match format string
Laurent, any suggessions?
Thanks
Biswa -
How to export and import Financial Reports between two servers
Cannot find the Export menu in Studio...
Please help.Use Workspace to export Financial Reports in either single format as des files or multiple reports in a zip file.
When the export selection window opens use the CTRL key to highlight multiple FR reports for exporting into a single zip file.
I prefer this way for promoting reports to production.
Brian Chow -
Hi,
i have create report using to table i have take search option in that report now i want to display report between two dates
How to put Between Date Quary in search option in where Clause .
My code is
select CRM_SALES_DEALs.id,
"CRM_SALES_CUSTOMERS"."CUSTOMER_NAME" as "CUSTOMER_NAME",
"CRM_SALES_SALESREPS"."REP_LAST_NAME"||', '||
"CRM_SALES_SALESREPS"."REP_FIRST_NAME" as "REP_NAME",
"CRM_SALES_DEALS"."DEAL_NAME" as "DEAL_NAME",
"CRM_SALES_DEALS"."EMAIL" as "EMAIL",
"CRM_SALES_DEALS"."DEAL_CLOSE_DATE" as "DEAL_CLOSE_DATE",
"CRM_SALES_DEALS"."DEAL_AMOUNT" as "DEAL_AMOUNT",
"CRM_SALES_DEALS"."DEAL_PROBABILITY" as "DEAL_PROBABILITY",
"CRM_SALES_DEAL_STATUS_CODES"."STATUS_CODE" as "STATUS_CODE" ,
"CRM_SALES_DEALS"."DATE_OF_QUARY" as "DATE_OF_QUARY",
"CRM_SALES_DEALS"."DEAL_SOURCE" as "DEAL_SOURCE",
"CRM_SALES_DEALS"."DEAL_AMOUNT" *
"CRM_SALES_DEALS"."DEAL_PROBABILITY" / 100 weighted_forecast,
(select count(*) from CRM_SALES_DEAL_products where deal_id = "CRM_SALES_DEALS".id) products,
nvl("CRM_SALES_DEALS".updated_on,"CRM_SALES_DEALS".created_on) last_changed,
t.territory_name,
CRM_SALES_DEALS.qtr, "CRM_SALES_DEALS"."CONTACT_NAME" as "CONTACT_NAME",
"CRM_SALES_DEALS"."ACTIVE_FLAG" as "ACTIVE_FLAG"
from
"CRM_SALES_SALESREPS",
"CRM_SALES_DEAL_STATUS_CODES" ,
"CRM_SALES_CUSTOMERS",
"CRM_SALES_DEALS",
CRM_SALES_territories t
where
CRM_SALES_customers.customer_territory_id = t.id(+) and
"CRM_SALES_DEALS"."CUSTOMER_ID"="CRM_SALES_CUSTOMERS"."ID"(+)
and "CRM_SALES_DEALS"."DEAL_STATUS_CODE_ID"="CRM_SALES_DEAL_STATUS_CODES"."ID"(+)
and "CRM_SALES_DEALS"."SALESREP_ID_01"="CRM_SALES_SALESREPS"."ID"(+) and "CRM_SALES_DEALS"."ACTIVE_FLAG" ='Y' and (:p1_find is null or instr(upper("CRM_SALES_CUSTOMERS"."CUSTOMER_NAME"),upper(:p1_find))>0 or instr(upper("CRM_SALES_DEALS"."DEAL_NAME"),upper(:p1_find))>0 or
instr(upper("CRM_SALES_SALESREPS"."REP_FIRST_NAME"||' '||"CRM_SALES_SALESREPS"."REP_LAST_NAME"),upper(:p1_find))>0)
and
(nvl(:P1_TERRITORY,0) = 0 or t.id= :P1_TERRITORY)
and
(nvl(:P1_ACCOUNT,0) = 0 or "CRM_SALES_CUSTOMERS".id = :P1_ACCOUNT)
and
(nvl(:P1_QUARTER,'0') = '0' or CRM_SALES_deals.qtr = :P1_QUARTER)
and
*("CRM_SALES_DEALS".created_on between :P1_CREATE_DATE and :P1_END_DATE ) >0 and* *Here I have put Quary*
instr(upper("CRM_SALES_DEALS"."CREATED_ON"),upper(nvl(:P1_CREATE_DATE,"CRM_SALES_DEALS"."CREATED_ON"))) > 0
and
nvl(DEAL_PROBABILITY,10) between nvl(:P1_MINIMUM_PROBABILITY,0) and nvl(:P1_MAXIMUM_PROBABILITY,100) AND
(nvl(:P1_LEAD_SOURCE,'0') = '0' or CRM_SALES_DEALS.DEAL_SOURCE = :P1_LEAD_SOURCE)Show me Error Command not Properly Ended
How can i search Between two date In Search option.
ThanksI'm guessing that this is Jay???
Please heed my numerous previous comments regarding formatting and those horrible full table aliases and upper case, double quoted names... Grrr...
Anyway, try this...
SELECT CRM_SALES_DEALs.id,
CRM_SALES_CUSTOMERS.CUSTOMER_NAME AS CUSTOMER_NAME,
CRM_SALES_SALESREPS.REP_LAST_NAME
|| ', '
|| CRM_SALES_SALESREPS.REP_FIRST_NAME
AS REP_NAME,
CRM_SALES_DEALS.DEAL_NAME AS DEAL_NAME,
CRM_SALES_DEALS.EMAIL AS EMAIL,
CRM_SALES_DEALS.DEAL_CLOSE_DATE AS DEAL_CLOSE_DATE,
CRM_SALES_DEALS.DEAL_AMOUNT AS DEAL_AMOUNT,
CRM_SALES_DEALS.DEAL_PROBABILITY AS DEAL_PROBABILITY,
CRM_SALES_DEAL_STATUS_CODES.STATUS_CODE AS STATUS_CODE,
CRM_SALES_DEALS.DATE_OF_QUARY AS DATE_OF_QUARY,
CRM_SALES_DEALS.DEAL_SOURCE AS DEAL_SOURCE,
CRM_SALES_DEALS.DEAL_AMOUNT * CRM_SALES_DEALS.DEAL_PROBABILITY / 100
weighted_forecast,
(SELECT COUNT ( * )
FROM CRM_SALES_DEAL_products
WHERE deal_id = CRM_SALES_DEALS.id)
products,
NVL (CRM_SALES_DEALS.updated_on, CRM_SALES_DEALS.created_on)
last_changed,
t.territory_name,
CRM_SALES_DEALS.qtr,
CRM_SALES_DEALS.CONTACT_NAME AS CONTACT_NAME,
CRM_SALES_DEALS.ACTIVE_FLAG AS ACTIVE_FLAG
FROM CRM_SALES_SALESREPS,
CRM_SALES_DEAL_STATUS_CODES,
CRM_SALES_CUSTOMERS,
CRM_SALES_DEALS,
CRM_SALES_territories t
WHERE CRM_SALES_customers.customer_territory_id = t.id(+)
AND CRM_SALES_DEALS.CUSTOMER_ID = CRM_SALES_CUSTOMERS.ID(+)
AND CRM_SALES_DEALS.DEAL_STATUS_CODE_ID =
CRM_SALES_DEAL_STATUS_CODES.ID(+)
AND CRM_SALES_DEALS.SALESREP_ID_01 = CRM_SALES_SALESREPS.ID(+)
AND CRM_SALES_DEALS.ACTIVE_FLAG = 'Y'
AND (:p1_find IS NULL
OR INSTR (UPPER (CRM_SALES_CUSTOMERS.CUSTOMER_NAME),
UPPER (:p1_find)) > 0
OR INSTR (UPPER (CRM_SALES_DEALS.DEAL_NAME), UPPER (:p1_find)) >
0
OR INSTR (
UPPER( CRM_SALES_SALESREPS.REP_FIRST_NAME
|| ' '
|| CRM_SALES_SALESREPS.REP_LAST_NAME),
UPPER (:p1_find)
) > 0)
AND (NVL (:P1_TERRITORY, 0) = 0 OR t.id = :P1_TERRITORY)
AND (NVL (:P1_ACCOUNT, 0) = 0
OR CRM_SALES_CUSTOMERS.id = :P1_ACCOUNT)
AND (NVL (:P1_QUARTER, '0') = '0'
OR CRM_SALES_deals.qtr = :P1_QUARTER)
AND CRM_SALES_DEALS.created_on BETWEEN :P1_CREATE_DATE
AND :P1_END_DATE
AND INSTR (
UPPER (CRM_SALES_DEALS.CREATED_ON),
UPPER (NVL (:P1_CREATE_DATE, CRM_SALES_DEALS.CREATED_ON))
) > 0
AND NVL (DEAL_PROBABILITY, 10) BETWEEN NVL (:P1_MINIMUM_PROBABILITY,
0)
AND NVL (
:P1_MAXIMUM_PROBABILITY,
100
AND (NVL (:P1_LEAD_SOURCE, '0') = '0'
OR CRM_SALES_DEALS.DEAL_SOURCE = :P1_LEAD_SOURCE)Cheers
Ben -
Difference between copying cube content using datamarts and direct copying
Hi Experts,
I have been going through the SDN for the last 6 months and this is my first post
I know two methods of copying the cube content from one cube to another.
One is data mart method in which we create a datasource based on the cube and
then create a transformation between the new cube and datasource.
This method is used if our source cube is in same server or in diff server.
Other method is directly copying the cube content from source to destination
by creating a transformation between two cubes .
this is used if source cube anddestc u be are in same server.
My doubt is if both the cubes are in same server then what is diff between first method
and second method,
Please clarify meHi,
Now Iam closing this thread with a conclusion .
The question is what is the difference between copying cube
content using datamarts and direct copying
Also what are there any other methods to copy cube contents
from one cube to another.
The diff bet using data marts and direct copying is
In case of datamarts,ven if the source cube is changed in futute there is no effect on the target cube.
In case of copying directly,whenever the source cube is changed,the transformation becomes inactive.
so we have to activate the transformation again.
ALso there are some other methods to copy cube contents fron one to other .
But datamarts is sap standard one.
Thankyo every one for giving answers
Regards,
Sundar -
Difference in GL Balances between two Standard Report fbl3n and fagll03
Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK Description Amount
86 GR/IR 1000.00
31 Vendor -800.00
50 TDS -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK Description Amount
21 Vendor 800.00
40 TDS 200.00
96 GR/IR -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No. PK Ammount
Entry 1 50 -200.00
Entry 2 40 -200.00 -
> ?????
*OPEN ITEMS - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No. PK Ammount
Entry 1 50 -200.00
Entry 2 40 +200.00
*OPEN ITEMS 0.00
PLEASE HELP
Regards
Soumitra BhattacharyaHi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram -
Error while generating report by fragmenting two cubes.
I have two Essbase cubes 'bas_reg'(current) and 'basreg09'(history) combined them into one in BMM layer by fragmentation based on Quarter of the Year. This two cubes have 3 unconfirmed dimensions . But for this report i am using the all fields from fact or confirmed dimensions. When i tried to create report i am getting following error. OBIEE is 10.1.3.4.1 and Essbase 9.3.1.
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for PD_Band.Gen3,PD_Band are compatible with the detail filter [Time.Gen3,Time = '2009 Qtr4', DepInst.Gen2,DepInst = 'DI_CWFN' ]. (HY000)
Regards
Sandeep ArthamHi Arpit,
As well as setting the macro security to Medium or lower, you need to tick the options 'Trust all installed add-ins and templates' and 'Trust access to Visual Basic Projects'. These options appear at the bottom of the Trusted Publishers tab in the Macro Security window.
Hope this helps,
Owen -
OBIEE 11G - Issue passing parameters between two reports
Hi folks,
I am struggling to pass parameters between two reports in OBIEE 11G.
My first report contains the following columns: Rolling Year Type (VCHAR), Year(VCHAR), Month(VCHAR), Cost(Double).
My second report contains the following columns: Rolling Year Type(VCHAR), Year(VCHAR), Month(VCHAR), Category(VCHAR), Cost(Double).
My requirement is to pass the Rolling Year Type, Year and Month values from report 1 to report 2.
On the Month column properties of report 1, I have created an Action Link called 'Drill to Category'. I have clicked on 'Navigate to BI Content' and selected Report 2.
Then on Report 2, I have included three filters: Rolling Year Type is prompted, Year is prompted, Month is promted.
When I run the report I always get the following error:
The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
When I check the cursor cache, the filter values are correct. Does anybody have any idea why Report 2 does not display?
When I remove the Month filter, the report works correctly.
I have since changed the third filter to be Month No and although Report 2 does display, it does not pick up the filter on the Month No.
I initially thought this may have been a caching issue and so I have disabled BI Server Cache but this does not fix my problem.
This was never an issue on OBIEE 10G as I found it very easy to navigate between two requests.
Has anyone else experienced problems with passing parameters between two request in 11G?
Any help appreciated.
Thanks
GavinHi,
I once tried this kind of requirement(with dashboard prompts though) and hit at similar issue. I later found out that the problem is with the space in the parameter values. Can you please let me know, if the same is the case with you?
Suppose the parameter passed is "Jan 2010", but the report on the destination takes the value as "Jan" & "2010". Yes, it kind of split the parameter value to two based on space. I think we can notice the filters the destination report got, by enabling filter view.
In this case, since you pass only value at a time, could you try placing the parameter value anyway in double quotes? I think the Server then will understand it as one value.
Thank you,
Dhar -
Difference between AP PO Reconciliation Report and GL
I have followed the following - R12 Accrual Balance Mismatch Between Accrual Reconciliation Report and GL - Troubleshooting (Doc ID 1107953.1)
My SLA and GL Balances match as per the doc.
However I have a difference of around 3 million in the AP PO Reconciliation Report and the General ledger.
Any ideas to find the cause of the difference is welcomed.
ThanksAre you still investigating this issue?
If yes, please submit the Accrual load run program with to-date as of the period-end of reconciliation with GL.
Then, reconcile again.
Regards -
How to get relationship between two views in the reports
How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports
Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar -
Results row calculation between two column result in BEx Report.
I want to use weighted average method between two keyfigure.
for example consider the following secnario.
CH Kf1 Kf2
A 10 5
B 6 4
C 3 2
Result 19 b]4.21</b>
how 4.21 is ((105)+(64)+(3*2))/total of Kf1(ie 19)
( A value(Kf1Kf2)+ B value (Kf1Kf2) + C Value (Kf1*Kf2))/total value (Kf1) = 4.21
is it possible to achieve the above result for Kf2.
With regards,
HariHello,
I cannot able to use Excel Macro functionality since it is a drill down report and report cells varies based upon the selection parameter.
and also i can't able to use Calculation, since this report contains lot of columns and if i use the formula, one more result column i have to include in all key figures and also business users not able to understand the report....
Is it possible to create a variable structure, for example user is executing for 10 days , the structure should display for only 10 days ans also i create structure for 31 days (ie one month)..
With regards,
Hari
Maybe you are looking for
-
I can't change my apple id password because my security answers don't match. It won't give me any other options and just keeps asking for the answers. What do I do?
-
The new project couldn't be created.
A box appears saying "The disk maybe locked, maybe full, try saving to different location. The new project titled appers as an empty folder. This happens when I wish to create a personal title for the project, but doesnt happen when I title the proje
-
Master Data Conversion (Vendor, Employee...)
Is there anyone who know better way to convert following master data to Oracle Apps? - Vendor - Employee - Distribution set - Bank null
-
Calling Java Function with Return as String []
Hi, I have written the following code. It's not compiling OK. DECLARE TYPE Tokens_Type IS VARYING ARRAY(20) OF VARCHAR2(20); s1 Tokens_Type DEFAULT NULL; SQL_STR VARCHAR2(2000) DEFAULT NULL; BEGIN SQL_STR := 'CREATE OR REPLACE FUNCTION Schema1.SPLIT_
-
How to push a new version of a view into visibility...
I have a UIView on screen, with a bunch of buttons. The user taps one of the buttons, and I want to change the screen by adding a bunch of new buttons. but I don't want the new buttons to just pop into view, I want to have basically a copy of the vie