Automatic Default User settings for new users

Hi,
When creating users in SU01 , the settings in the default tab is mapping to the original standard. Is there any way to make the settings so that the new users created with the required settings?
Thanks and Regards,
Vimal

As far as i know this is a standard setting and if you copy any user then you have option to select the default tab and it will copy the data from existing user but while creating it will pick the standard setting only.
Check this thread also. It seems useful
SU01 - Default Values
Regards,
Subhash

Similar Messages

Change default security settings for new Discoverer users? How?

Hello, using Discoverer 10g with SSO integration.
I've created two roles and create in advance users in the DB user, granting them
one of the two roles. The two roles privileges for Discoverer are already configured.
This way, when I create the user in the DB before launching Disco, granting the user one or the other role, I should be all set about what the user can or cannot do on Discoverer (Plus).
So far the theory :)
The problem is that the full permission given by Discoverer to each new user override the role settings, so each new user can do everything (instead one of the roles forbids saving and sharing, for example).
I have to go to Disco Admin and uncheck the "Plus/Viewer" checkbox for the user to make roles actually work as expected.
How can I set Discoverer user default as "Cannot do anything" on Plus/Viewer so that roles apply without further admin intervention?
Thanks
Mario

Thanks a lot Rod.
The problem here is we need to allow portal users the ability to access Discoverer Plus without using Disco Admin: once a user is registered in the SSO, he should be able to connect successfully to Discoverer.
So we need creating user privileges on behalf of Disco Admin.
Tough job, but it seems it ca be done.
Regards,
Mario

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

"Untitled" as default document name for new documents

I have one installation of Adobe Illustrator CS2 in a Mac with which I have the following problem:
Whenever I go to File->New, to create a new document, the default document name is blank, and it should be "untitled".
Is there a way (without reinstalling) to correct this? (turn the default blank document name to "untitled" default document name, for new documents)
Thank you.
Juan Poniachik

On what Mac? If it's on a new Mac with Snow Leopard, I would guess it is one of those compatibility issues of new OS vs. legacy software. If so, you can't change any of that. Other than that I can only think of trying to edit the document templates...
Mylenium

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
Osvaldo

Hi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support

Default File Type for New Forms - How to change?

Hi,
How can I change propperty: Default File Type for New Forms?
It is enabled! Do I have to be Administrator to change it? I have SAP ALL..
SFP -> Layout -> Tools --> Options -> Document Handling
tnx, Adibo.

There is no authorisation required for changing the file type. You are saying its enabled, then you can change it.
Edited by: Nikhil Poojari on Aug 28, 2009 6:50 AM

Settings for new iphone {streaming}

can someone provide me with the correct settings for new iphone
i am streaming clips via wowza, need top quality/ small file size's

No idea what a wowza is.
What are the specifications for this wowza thing, whatever it is? Is it a server? When you googled the iPhone's video playback capabilities, what did you find?
bogiesan

Default Bios Settings for RS480MS-IL2

Hi all
I am just wondering if there is some hidden key that loads some Default Bios Settings for this board? I know there is an Optimized Settings option, but i haven't seen a Default one.
I am using version bios version 3.8
Thanks.

have you tried a better psu
a 128 mb ram consumes around around 8 to 10 watts
http://www.blueowltechnologies.com/pmConsumption.asp
volts x amps =watts
3.3v feeds ram
so at most you have 46 watts on a good day

Customize default user settings for new RemoteApp logins

Hi all,
I'm poking around with RemoteApp on Windows 2012 R2 and have it set up to use a centralized file share for the user profiles and everything seems to be working ok. Is there a way for me to customize some of the options in a user's profile for the first time
that they fire up a RemoteApp? Is it like a physical desktop where the hidden "c:\Users\Default" profile gets copied into the new user profile? I know once a user saves settings in a RemoteApp (browser bookmarks, default program options, etc....)
it gets saved in their profile on the central file server but I'd like to save them as much time as I can by giving them a precustomized profile.
Thanks

Hi Brian,,
Thank you for posting in Windows Server Forum.
Kindly check below thread where described for editing the rd web page file and some other method to set default user.
How to set default logon domain RD Gateway and/or RD Web
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f02bd61f-d6fd-4c05-b17a-deffcc61a4e9/how-to-set-default-logon-domain-rd-gateway-andor-rd-web?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Setting Default Global Settings for Bex Analyzer 7 for all users

We need to set default settings for Bex Analyzer Global Settings when we install SAP-GUI 7.2 in our user's workstations. The current default settings are that all of them are turned off. We would rather not have to run around and change each of our 1,000 user's settings.
Ed:. Apparently [OSS Note 1254112|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1254112] discussed how to adjust Windows Registry settings to resolve this.
Edited by: Charles Belt on Apr 28, 2011 10:01 AM

Just so any one is looking for the correct solution and it worked for me.
Small correction to the information in the OSS note 1254112.
for setting the legacy version setting use the below string in the registry
"LAUNCH_VERSION" = "LEGACY" insted of "LaunchLegacyVersion"
Kiran

Possible to modify default module settings for large deployments?

Is it possible to modify the default threshold and action settings for select modules, so that everything is good to go as soon as I add the node into SMC?
I am trying to find a way to easily standardize the monitoring and notification settings across the environment.

Hi mcomdsm,
I think the easiest way to standardize your thresholds and actions settings would be to use the Manage Jobs feature, which allows you to create tasks like loading/unloading modules, adding rows to specific modules, setting up alarm thresholds and actions and apply it to a user-defined group of objects. This way, if you add a new node to Sun MC, you can run the same task already saved in managed jobs against the new node.
There is a nice example on how to use Manage Jobs here: [http://forums.halcyoninc.com/showthread.php?t=97&highlight=threshold]
Pegah Garousi
Halcyon Monitoring Solutions

Default printer settings for HP Deskjet 882c

All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
Pulling my hair out here ... help would be lovely!

You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up.
I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
http://goo.gl/0WUyIe
(*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
After enabling the web services again the printer code area will still be blank if you are out of cyan ink.
Regardless the new code will display on the front panel (under web services).
I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
I work on behalf of HP.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

What are the default font settings for 7.0.1 I have messed with them a bit and now my text is blotchy. I want to start clean.

I tried to adjust font settings to a font that I prefer and a size I can read. It was all kind of messed up so I searched what the default settings should be to start at ground zero again which I found but now it is worse. The main issue is that text is blotchy, dark some places, light another. Monitor is new so it's not issue. What exactly are the Default settings for 7.0.1 I'm not sure mine are correct ??? What other things can I look at if the default doesn't improve everything? I have Windows 7 and turning clear text on or help has no effect. PLEASE HELP ???

You can see the defaults in a screenshot in this KB article:
* https://support.mozilla.com/kb/Some+text+shows+up+bold+after+upgrade
You can check the font setting in: Tools > Options > Content : Fonts & Colors > Advanced
Default Font: Times New Roman (16)
Fonts for : Western
Proportional: Serif (16)
Serif : Times New Roman
Sans-serif : Arial
Monospace : Courier New (13)
[X] "Allow pages to choose their own fonts, instead of my selections above"
Are there any problems reported in the Graphics section at the bottom of the Help > Troubleshooting Information page?
If you have an ATI graphics display try to disable "Morphological Filtering" in the Catalyst display driver:
* Catalyst Control Center > 3D Settings > Disable Morphological Filtering
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

[SOLVED] pcmanfm lost default applications settings for office docs

I'm not sure if it was the Libreoffice recent update or not, but I no longer have any application settings for office documents (ppt, doc, xls, ods, odp, odt, etc.). When I right click to choose an application, none are listed. I tried the suggestion from the wiki to install gnome-menus but the situation was no better after a logout/login.
Even inputting a custom command like:
/usr/bin/soffice --impress %f
does not work. It seems that the "Open with" dialog is completely function-less.
Any suggestions/experience with this?
Last edited by jwhendy (2011-08-09 22:50:41)

I fixed this. I just had to figure out the correct mimetypes and re-add them. I still believe this used to be down automatically, but not a big deal. Part of my problem was trying to use xdg-mime to set defaults for "application/ppt" when it's really "application/powerpoint."
I found this list of mimetypes that was really helpful for setting defaults for .doc, .xls, and .ppt.
There are also listings for the correct mimetypes for .odt, .ods, and .odp. In the end, my ~/.local/share/applications/defaults.list looks like this:
[Default Applications]
application/pdf=evince.desktop
txt/application=emacs.desktop
tex/application=emacs.desktop
application/powerpoint=libreoffice-impress.desktop
application/msword=libreoffice-writer.desktop
application/excel=libreoffice-calc.desktop
application/vnd.oasis.opendocument.presentation=libreoffice-impress.desktop
application/vnd.oasis.opendocument.spreadsheet=libreoffice-calc.desktop
application/vnd.oasis.opendocument.text=libreoffice-writer.desktop

Automatic Default User settings for new users

Similar Messages

Maybe you are looking for