Automatic email alert messages

I'm looking to create automatic job alerts with php and a
MySQL database where once a job that meets that users criteria is
posted, an email is sent to them and/or emails are sent every 24
hours.
Here's an example for clarification:
http://www.phpjobs.com/jt/jobs/addedit_alert.php
Can anyone point me in the right direction?

Hi Arvin, I have just configured the same scenario and had similar problems. The way I worked around them by achieving the same result:
1. setup dialog user in 000 of your Solution Manager that you then use as the sender in the method configuration. Also define pseude e-Mail address for the user.
2. Use the auto-reaction method CCMS_OnAlert_Email_V2 instead of version 1
3. My parameter configuration as follows:
SENDER                 CCMSALERTADM
RECIPIENT              [email protected]
RECIPIENT-TYPEID       U
REACT_ON_ALERTS
SUBJECT_ALERT          Alert
SUBJECT_ALERT_CONT     Alert Text
Works fine for me in that I can see an alert message in the outbound queue in client 000.
Hope that helps

Similar Messages

  • Service desk settings, automatic email status message change

    Hi,
    I'm working at Solution Manager 7.0 SP16. I've configured and working Service Desk scenario and it works. Now I'm trying configure automatic email at status change of messages, but It doesn't work
    I'm following spro transaction, and SAP Note 691393. I am configuring Service Desk Specific Scenario Settings -> Automatic Email at status change.
    I've checked:
    - SCOT is correctly configured and working OK.
    - Business partners emails are mantained.
    I made the configuration suggested as described SAP Note 691303 SAP Tutor. Following SAP Tutor I go to transaction sppfcadm->select crm_order->botton "define action profile and actions"->Action Profile(left view) and SLFN0001_ADVANCED(right view)->mode change->new entry...   I follow the next slides at SAP Tutor.
    At the end, when I check results, I go to the support message (transaction crm_dno_monitor) to edit-> Fast Entry->service process->status->In process and I press button save. So I go to Transaction data->Actions but any about the send mail action
    Please could you help me??
    Thanks and Regards
    Raul Aguilar

    Hi Mahantesh,
    The settings that I've defined at the start condition are:
    Transaction sppfcadm->select CRM_ORDER->button "Condition Configuration"->button technical names on->select action AI_SDK_STANDARD(double click)->change edit mode->right frame button create and select the new condition "Send an email to the author when status of message changes"->start condition tab->button edit condition->Name: Zsend_email->Condition definition:User status->Operators "="->constant "status profile"->SLFN0001 "Service Desk Status header"->Status E0002 "In process"->boton transfer condition->save button. At the end I have:
    &CRM Service Process.User    =
    Status&                                  E0002SLFN0001
    I create a new support message (help->create support message) -> transaction crm_dno_monitor->open the support message just created->button change->fast entry->service process-> status->In process->button save
    In order to test I go to Transaction data->Actions:
    I've a line: wth a red circle, Action="send an email to author when status of message has changed" and start condition:
    &CRM Service Process.User      =
    Status&                                    E0002SLFC0001
    Please could you help me?
    Thanks and regards
    Raul

  • Customize email alert messages for Integration Engine Errors

    Hi experts,
    I've configured auto-reaction emails for alerts raised by Integration Engine in CCMS.
    The email content I got is as below:
    Subject: CCMS alerts PI1 20070319 140556
    <i>ALERT for PI1 \ IEngine_PI1_001 Integration Server \ Category MAPPING \ Message alerts by Error Codes at 20070319 060447 ( Time in UTC )
    RED CCMS alert for monitored object Message alerts by Error Codes
    Alert Text:Error code: GENERIC error text: com/sap/xi/tf/_MM_OperationPro cInfo_ODSOperationP~com.sap.ai i.utilxi.misc.api.BaseRuntimeExceptionFatal Error:
    System:PI1
    Segment:SAP_CCMS_ootspdbs02_PI1_01
    MTE:PI1\IEngine_PI1_001 Integration Server\Category MAPPING\Message alerts by Error Codes
    Client:001
    User:PIAFUSER
    Severity:       50</i>
    May I know how I can configure the contents of this message?
    I can't seem to find them in any of the CCMS alerts settings.
    Please help.
    Thanks.
    Ron

    Hi,
    Go through these links..
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    http://help.sap.com/saphelp_nw04/helpdata/en/17/550c404a435509e10000000a1550b0/content.htm
    https://websmp102.sap-ag.de/monitoring
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/ae8d4243a5de54e10000000a155106/frameset.htm
    /people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
    http://help.sap.com/saphelp_nw04/helpdata/en/25/27fb1c56ff3b41a5d6807d3174d5c7/frameset.htm
    regards
    manoj kumar

  • Automatic Email Alert from Central System

    Hello,
    Would like to ask for someone knowledgeable with setting up central auto-reaction approach on SAP System. Currently we are configuring our R3 system with this capability for us (recipients) to inform immediately if certain Critical Business Process fails. However, we have made a customized function module that determines the alert information and sends them to our central monitoring system (Solution Manager) by means of RFC (remote function call).
    Our problem now is that, when we intentionally failed one job to test the functionality of this alert and inform the recipients, we found out that no alert notification has been received by the recipients.
    Would you advice any steps or process or documents that I could use for verification on my set-up.
    Or any inputs would be highly appreciated.
    Thanks in advance.

    Hi Jaypee,
    First check if the function module u r using is calling the program to send mails through SMTP,, next check the SCOT configuration, and the authorisations for the message server.
    It would ber helpful if u could post the error number in SOST( status text)
    Also,
    if possible i would like to know what further analysis is ur CEN doin on the alerts??
    Regards,
    Kris.

  • How do I get A Pop Up Email Alert Message Window?

    You know when you get an email well how do I get it so I get a pop up window displaying that I have an email?
    Always wanted this feature for many years and I always seem to see this feature in movies.
    Just been watching the 'Constant Gardner' film and Ralph Fiennes has one pop up in Mail in OSX.
    Is there something available which enables this in Mail?
    Thanks
    (For iNternet Im using - PIsmo G3, OSX10.2.8, Mail 1.2.5)

    You might give Mail.appetizer a try.
    http://www.bronsonbeta.com/mailappetizer/
    Bronson
    P.S. - Despite the fact that my name is 'Bronson' and the website is 'bronsonbeta', I actually have no affiliation with the developer or the website.

  • Sending Alert Messages to File System

    Hi,
    I am trying to implement a scenario in PI which automatically processes alert message generated by the Alert Framework (the messages are processed in a message mapping). Therefore I am sending alerts via mail and receive these mails afterwards with an integration scenario PI. As this does not work if the mail server is offline I am searching for a possibility to send alert messages directly to the file system. Is there a way to do this? Or do you have any other suggestions how I could handle this problem?
    Regards,
    Christian

    HI Christian,
    The other option to get the alerts is to regster for SMS alerts to your mibile, in addition to the mail alerts.
    Regards
    Venkat

  • Email alerts in process chain

    Hi
    I am trying to send email alerts (messages (sucess/Failure) thru my process chain , I gave the correct email -id a , but I'm not getting an email, after I schedule it, to I have to make any settings with Basis team?? Can some one share what are the initial steps , which have to be taken ??.
    Thanks
    Praveen

    Hi Praveen,
    Please follow the below steps
    Would like to share this information regarding email alerts whenerrors occur in Process Chains.Step by step process to follow:
    1. go to ALRTCATDEF
    2. select classification "Process Chains"
    3. click on display/change
    4. double-click on "error in a process of a process chain"
    5. click on "fixed recipients"
    6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
    7. save
    8. go to your process chain (rspc)
    9. go into edit mode
    10. from the menu, select Process chain -> attributes -> alerting
    11. check "send alerts if errors occur"
    Regards!
    Mallikarjuna Reddy

  • When I am writing an email, I get an alert message that says "The message could not be copied or moved to the drafts folder. Writing to the folder failed. To ga

    When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
    If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
    If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
    Help!
    Frank

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Service Desk Settings, Automatic Email at status change of messages

    Hello experts,
    I need your help about this:
    I am configuring Service Desk Specific Scenario Settings -> Automatic Email at status change.
    I made the configuration suggested as described SAP Note 691303. Also I configured the status profile SLFN0001 in transaction DNO_CUST01, and the Action profile SLFN0001_STANDARD, both  for the SLF1 (Service basis message), but still when we change the status of messages, the email is not generated in SCOT, overview of send orders.
    I want to clarify that the configuration made for the action of send email was in transsaction SPPFCADM, selected DNO_NOTIF, and push Define Action Profile and Actions, then selected the Action profile SLFN0001_STANDARD for making he ocnfiguration as suggested in note 691303.
    SCOT is correctly configured and working OK.
    Business partners emails are mantained too.
    Thank you very much.
    Hector Longarte

    Hello. Thanks to all of you for your comments. I am answering to your questions below:
    Have you assign proper partner function to every status in action?
    I do not know where can I make this assigment.  I am thinking that this may be the cause. Please I kindly ask you to give me orientation about this.
    Have you defined condition for defined action?
    Yes, the condition was defined thru SPPFCADM. Now, I wonder if this must be configured for CRM_ORDER application as described in note 691303, or for DNO_NOTIF ??
    Have you maintained user deatils on identification tab in BP?
    Yes, the Business partners and emails adresses were correctly mantained.
    The configuration we are talking about and you want to change, is it regarding SLFN (Service Desk Messages) or SLF1 (Basis Service Message)?
    I supose that for Service desk messages we must configure SLFN, and not SLF1. Right?
    In DNO_CUST01, we have SLF1. We have not made any configuration in DNO_CUST04, it is still as original standard. Please let me know if we are right.
    You want to send an aut. email notification when status of SLF1 changes?
    We want to send email notifications to the message creator about the status change of service desk messages.
    Thank you very much.
    Best regards.
    Hector Longarte.

  • Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

    The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

    You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
    See if another contact is marked as this is my card.

  • How to set up ical to send email AND message alerts by default

    How do I set up iCal to send me an email alert and a message with sound 15 minutes before the event by default so that I don't have to remember to do this everytime I add an event in iCal (which by the way I can't remember)?
    Thanks for your help.

    Why not search for iPhone setup instructions on these forums?   I have posted exact step by step instructions or configuration summaries at least three times in the past 6 months on this topic.
    Here's one ....
    http://forums.verizon.com/t5/Verizon-net-Email/Ito​uch-is-connected-but-can-t-get-email-to-work-from-​...
    The above one specifically deals with Verizon mail via the Yahoo portal.   For Verizon regular mail you would modify as follows:
    POP Account Information
       Name: Joe User
       Address:  [email protected]
       Description: Verizon
    Incoming Mail Server
       Host Name:  incoming.verizon.net
       User Name:  [email protected]
       Password: ******
    Outgoing Mail Server
       SMTP outgoing.yahoo.verizon.net    ->
          Primary Server  ->
             Host Name: outgoing.verizon.net
             User Name: [email protected]
             Password: ******
             Use SSL:  Off
             Authentication:  Password
             Server Port:  587
    Advanced
       Deleted Message
          Remove: After One Week
       Incoming Settings
          Use SSL:  Off
          Authentication: Password
          Delete from server: Never
          Server Port: 110

  • Email Alert on a Successful message in PO/PI 7.4 system

    Hi All,
    I am looking to send an email alert on successful delivery of my message from PI/PO system.
    I am running on a single-stack Java stack system.
    My scenario is from a Flat File to IDOC creation in ECC.
    As soon as all the IDOCs are created in ECC, user needs an email alert for him to be updated that all the IDOCs are created in ECC system.
    Please help me out the best possible way to configure this in my scenario.
    Thanks
    Shyam

    Hi Shyam,
    Yes this option is viable to use.
    If your primary interface which in your case is Idoc one goes to error than your mail adapter will go to Hold status. And eventually  it will fail after some time. It will only be triggered after your first interface is successful without any error in it.
    We have used this approach in our current project, but the only difference is that the receiver adapter is SFTP.
    Regards
    Avichal Jain

  • BPM alert message as subject of email?

    Hi,
    I am working on a BPM scenario, where I am sending alerts from BPM. These alerts are sent as an email to the users.
    Is it possible to send the alert message as subject of the email along with the content?
    Thanks & Regards,
    Ashish

    Hi,
    Yes, alert is raised using control step in BPM. Any customizing possible?
    Regards,
    Ashish

  • Email alert for fault message

    Hi guys
    i have define a fault message for a Async interface where the proxy is going to send back a fault message .
    This will show up as applilcation error within PI..
    I wanted to confirm if this will raise a email alert ??? I think it will

    >>i have define a fault message for a Async interface where the proxy is going to send back a fault message .
    >>This will show up as applilcation error within PI..
    When you return fault message (application error) as response , PI will treat as response message. This is not something like system error. In this case mesg process will be completed.
    >>>I wanted to confirm if this will raise a email alert ??? I think it will
    Only if you use CCBPM and raise exception via control step then you can send mails via alert configuration.   In your case you will not get any email unless you create custom coding.

  • Automatic email when an alert occurs (RZ20) from SAP R/3 4.0B

    Hi SAP Experts.
    How do I configure the Automatic email when an alert occurs (RZ20) in the system SAP R/3 version 4.0B (AIX +Oracle) ?
    Best regards.
    Luis Gòmez

    Hi Luiz
    check this out
    Note 429265 - CCMS monitor architecture: Central auto-reaction
    Note 176492 - Automatic email when an alert occurs (RZ20)
    SAP Note 939616 - CCMS auto-reactions: Help with Troubleshooting
    Check SAP Note 617547 - RZ20: Sending alerts as mail and SMS
    https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    Setting Up your Central Monitoring [original link is broken]
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106a4d88-2a36-2c10-549b-dc549d00b8b9
    Read SAP Note 522878 - iSeries: Availability of CCMS Agents
    Regards
    Uday

Maybe you are looking for