Automatic/Immediate print of quality notification after saving

Hi,
Checked numerous posts avialable on this requirement but after following the suggestion still facing the issue.
Requirement is right after saving a quality notification print should be triggered.
Following settings are in place:
In Quality Notification print control
-> Define Shop papers, Forms, Print programs (1. defined shop papers and assigned print programs 2. Assigned shop papers to notification types)
-> Define Printer ( here under user-dependent print control with wild card * entries chose Print Now option)
Thanks in advance.
Regards,
Ragahva

Hi Raghava,
If you have configured the notification print control setup correctly, then the next step to get a notification printed is to select the right shop floor paper and print it. To do that please select - QM02/QM03 => Notification => Notification
Now select the appropriate Printer and the document you wish to get printed and print it manually.
Please note that any notification type can have more than more than one Shop Floor Paper selected to be printed. If you wish to automate it based on User details, then I think you may need to work with the below exit -
QQMA0014 QM/PM/SM: Checks before saving a notification
Please note that you have to put a logic there to read the user's credentials and print the notification while saving. You can take clues form the below thread too -
http://scn.sap.com/thread/3691375
Thanks to the original contributors of the thread!!
Thanks,
Arijit

Similar Messages

Automatic print of Quality Notification

Dear All,
I need to know if it is possible print automatically the Quality Notifications when people create a new one.
For production order you can set a customizing flag that allow to print the order. There is in SAP R/3 an equal system for the QN?
Thanks and best regards
Matteo

Hi Matteo
Please go to T : code OIDA : define shop papers for notification
go to : t : code OIDB : assign shop papers to your notification type
Then when you create notification print can be taken
Hope ths helps
Please reward points
Sunil

Enhancement to automate Quality notification after stock transfer posted.

Hi PP Gurus,
Here we need to create Quality Notification (type Q2 and Q3) only when Stock of material is moved to Blocked stock through movement type 344. If the material/batch is against vendor it should open Quality notification type Q2 and if it is against Production order it should open Quality Notification type Q3.
If anybody worked on such requirement please help.
Thanks & Regards,
Abu Arbab

Hi,
The development is done using MB_DOCUMENT_BADI (which will be triggered once document is posted against movement type 344), which eventually trigger FM IQS0_CREATE_VIQMEL.
Best Regards,
Abu Arbab
Edited by: abu arbaba on Mar 20, 2009 4:06 PM

Automatically put in process PM notification when saving

Hello all,
Does anyone have an idea in how to implement specific process when saving PM notifications after their creation ?
My aim is to swith from system status I0068 (Oustanding notification - which is the one for the notification when saving) to I0070 (Notification in process) in an automatical way when saving the notification.
I found function module IQS4_CHANGE_STAT_NOTIFICATION, but as i am in creation for the notification, is it possible to update its status at the same time ?
Moreover, i found user exit ZXQQMU20 (function module EXIT_SAPMIWO0_020 ) : is it the good one to implement the ABAP code ?
As i can not have development key on the development environment, i am not able to do tests.
Thank you in advance for your advises.
Regards.
Laurent.

Hello everybody,
We tried to changed default (initial) system status notification from I0068 (Outstanding notification) to I0070 (Notification in process) in user-exit EXIT_SAPMIWO0_020 when we are creating new notification (not all notification types are concerned).
We used for this function module IQS4_CHANGE_STAT_NOTIFICATION with export parameter:
i_qmnum = notification number,
i_vrgng = 'PMM2',
i_spras = 'FR',
i_commit = 'X'
Nevertheless, this does not work. Besides, notification is no longer saved...
Any suggestion in the way to solve this problem ?
Thanks.
Laurent.

Printing of quality notification

Hi Experts,
I need one help concerning printer definition.
Ive one issue regarding desired number of print outs for quality notification.
Our Basis team has defined certain printers in SAP, now issue is that user is trying to print 3 numbers of copies (for quality notification) but printer is taking number of copy as 1 only.
Can somewhere we have a check on number of copies while defining printer.
So my question is do Basis team restricts number of copies while defining printer, that means printer should print maintained number of copies only.
Please help.
Thank you,
Mayur

Hello Craig,
That's correct, I've set number of copies as 3 in the path mentioned by you.
While printing quality notification, when I select 'LOCL' printer then it goes to spool (T-Code: SP01) and after that I'm getting desired number of copies. No issues in this case.
But when I select printer (say IN01_XX) which is defined for that particular user in that case I'm getting only 1 copy though I've configured number of copies as 3. So every time I've to give new printing.
Please help
Thank you,
Mayur

Automatic Task Determination In Quality Notifications

Hi QM experts!
In the Quality Notifications, there is an item called "DETERMINE TASKS", it under the menu EDIT->TASKS->DETERMINE. What is the main purpose of this item? Is this the part where i can automatically put the TASKS in the TASKS tab? If that is so, how can i set it up?
What is also the main function of DETERMINE PARTNERS. And how do i set it up?
I would really appreciate if someone could help me.
Thank you.
Regards,
Heinrick Palad

hi heinrick
the menu use specified is used for automatically generating of Task when you specify the priority in notification, it works like this
Automatic Determination of Tasks
Use
The system can automatically determine which tasks should be performed first, based on the predefined parameters response profile and service profile. The response profile and service profile determine the times and the time interval within which your company should respond to a notification in a particular way:
In the response profile, you can define one or more standard tasks based on a notification's priority, which the system can propose automatically and which must be performed within a specified time period. The system automatically assigns the determined tasks to the notification header.
In the service profile, you can define time periods for individual workdays (service windows), in which a quality notification can be processed.
You create a notification at 10:00 am. The response profile defines a time interval of two hours for the task code "Call back customer" and a time interval of 4 hours for the code "Check whether technician is on site". The times defined in the service window are 8:00 am to 12.00 noon and from 2:00 pm to 6:00 pm.
In this case, you should call back the customer by 12:00 noon to discuss or clarify the problem. If you have to send a technician to the customer site, the technician must arrive by 4:00 pm.
Prerequisites
Your system administrator must assign both a response profile and a service window to each notification type in Customizing for Notification Processing.
Activities
Choose Edit ® Tasks ® Determine to automatically determine the tasks. You can also choose Edit ® Tasks ® Simulation(Det.) to simulate the task determination (without actually assigning the tasks to the notification).
regards
thyagarajan

Service Desk NOTIF_CREATE no more success notification after saving

Hello experts
While testing Service Desk before Go-live, the transaction NOTIF_CREATE suddently started to behave abnormaly.
After fields completion, when the requester presses save and then instead of receiving the successful notification with a message number. The NOTIF_CREATE screen closes and a green arrow can be seen at the bottom of his SAP menu. Looks like OK to the user but creation was not completed successfully.
In the background, the support message was created with an appropriate number. But many other features like support team determination, automatic workflows, etc. are no more working.
I tried with different accounts even with SAP_ALL profile, doesn't look to be an authorization thing. I also searched for OSS notes without a clue.
What do you suggest me?
François

Hi,
I have upgraded to SPS17 and tried with other iBase components without success. I tried in debug mode step by step to see where it was stucked and it's hard to find since no message is returned. Looks like an exception is raised. This happen in the RDSWP_NOTIF_CREATE PROGRAM at line 15. It seems to be an exception of type "2 other". At that precise time, the debugger enters in an endless loop and a yellow exclamation sign is displayed in the status bar. (before it was a green check)
You talked about reintalling the iBase. The whole iBase with all components? How can I remove the existing iBase and then recreate it and finally have all the components attached as before?
Thanks,
Francois

Cannot print to PDF file after saving it to JPEG

I get the following error when I try to print to a .pdf file that I just saved to a .jpeg.
"Adobe PDF" cannot access the file because it is in use by another applicaiton or process:
C:\Users\<username>\Desktop\junk.pdf
Verify that the file is not open by another application or process and try again.
I am using Acrobat X Pro on x64 Win 7.
Here are the steps I take to produce this error:
1. Print any file to the "Adobe PDF" printer
2. Save that .pdf file as a .jpeg
3. Close JUST that particular .pdf file while leaving Acrobat X up (clicking the small black x on the top right).
4. Try to print any other file to "Adobe PDF" with the same name as the .pdf file I just closed.
I do not get the error if I do not save to .jpeg, or when I close Acrobat X completely, but the user who is complaining about this error keeps multiple .pdf files open and doesn't want to have to close Acrobat X out completely every time.
Any ideas?
Thanks in advance!

Thanks Pat. Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped. Uninstalled Reader and Flash as well. Strange thing with Flash, one of my online broker programs provides streaming of CNBC. When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash. I did, and it loaded again with no mention of Flash having already been installed.
Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE). Expanding the window in WE makes it large enough to read. I would still like to find a way to open the files as they are designed to open.
I have done all of the Adobe updates as they have been presented. Microsoft updates load automatically, and restart my computer in the process. I do not look to see what the updates have been. I figure if there was not a need, Microsoft would not make the updates.
[private data removed]

Video quality poor after saving

I'm using Soundbooth CS4 on a Mac and when saving a video/audio file the video is really poor quality, blurry etc. I'm exporting using the compression guidelines for vimeo (http://vimeo.com/help/compression), as that is where I'm planning on uploading to. I've tried saving as an .mp4 and .mov and had the same problem with both. Has anyone had the same problems?

AT&T delivers U-verse service over a fiber-to-the-node
It is important to note this is not a cable modem as you stated. Cable modems work of Docsis technology. You have Fiber which I would take over Docsis any day. You should have very good internet. Yes 6MB Down is just fine for streaming Netflix. You can stream good quality at less if it was the case.
The problem could be local. You mentioned the laptop is fine but the apple tv gets worse. Are both on WiFi? If yes then check the signal strength of the Apple TV vs. the PC when you see this happening. It could be possible but not likely that you are getting wifi interference. Possibly from a phone or house hold appliance. This also could depend on your country and the default channels. Try connecting the Apple TV via ethernet if you can and see then if the same thing happens.
Good Luck

Automatic Trigger print of Quality certifcate

Dear Experts,
Kindly suggest the ways to print the COA automatically from the system when customer does not perform the inspection at the time of delivery, they produce the material with inspection type 04 perform the result recording and sends the COA once the product is delivered. Kindly clarify even the inspection is not performed at the time of delivery , can system trigger the automatic print of COA at the time of delvery based up on the lots or batch for which the results are recorded with inspection type 04.
Please also suggest any other ways to trigger the automatic printing of COA in the above scenario .
even buisness wants to take the COA without performing the UD for the lots.based up on result recorded for the MICs.
Thanks in advance for your inputs and help..
Best regards,
Nitish Jain

The process is no different than printing the COA when doing inspection at delivery.
The key is how the cert profile is set up and where the results get pulled from. Of course you can pull the results from the 04 inspection lot. But the UID must be done first. Why woud you ship the material if it hasn't completed inspection? If you have tests that take a long time ot perform then set those up as long-term characteristics.
You can report the value from the batch record as well which is what I prefer to try and do. Reporting batch results can be more reliable then using the inspection lot results. This is especially true if you ship the material from warehouses where the 04 lot doesn't exist.
FF

Shop paper printing issue in Quality notifications

Hello All,
I have a requirement where the user wants to print/fax quality notifications to a certain printer (printer 2) other than his regular printer defined in user defauls in SU01.
In the IMG settings for quality notifications, I found the customizations for Print control. In the customization 'User-Dependent Print Control' (under 'Define Printer'), I created a new record with the user name, the shop paper corresponding to a quality notification and specified the printer name (printer 2).
However, I notice that when I print this shop paper from within the quality notification, it prints it on the user default printer (defined in SU01) and not in the new printer (printer 2) defined in the above mentioned customization.
Please let me know how I can configure the notifications to be printer on this new printer.
Thanks,
Rugmani

Check the IMG in the following transaction OID1 & OID2 and OID3 for default printer
Thanks
S.N
Edited by: SN on Jul 18, 2009 8:09 AM

Print Quality Notification

Hello Experts,
My client needs to take 3 prints of quality notification everytime as 1 copy goes to Vendor, 1 copy to Accounts & 1 with IQC.
But even if we select no. of copies more than 1, It prints only 1 copy & every time we need to create new spool request which is unnecessary NVA. I tried one customization in QM.
I want quality notification printing plant wise.
In Customizing - Quality Notifications - Notification Processing - User Specific Print Control - No of copies defined are 1 only.
I tried to keep it Blank or * but it is not accepting.
There is one push button for PM so with that can we assign plant and shop papers.
Thanks & regards
Mayur

Hello Krishna,
I created Print Diversion and assigned to different plants.
But when I go to quality notificaton and try to take print out, it is showing no. of copies field as 1.
Though I've maintained no. of copies as 3 in print diversion for each plant.
I just want to confirm whether this is due to output program assigned to shop paper.
Thanks & regards
Mayur
Edited by: mayur kshirsagar on Feb 25, 2008 1:59 PM

Assign Execute and Review for Quality Notification

Hello Experts,
Can we configure the workflow WS24500047 or is their any change in configuration in SPRO so that we can make the following business scenario.
1- Quality Administrator will create quality notification in QM01.
2- Quality Administrator will assign the task to the responsible person for eg. User1 is responsible to complete the task to fix a bolt of a machine
3- After fixing the issue. User1 will make the the task complete and request to close the task
4- Other User say Reviewer will see the request from User1 and finds the the task is properly done and he will make a request to the approver to close the task
5- The approver will approve the request and close the task.
6- And if the all the task of the quality notification is complete then
quality administrator will complete the quality notification and close the task.
in other words.
QA (will create the Quality notification and assign to user) --> User1 (Fix the issue and make a request to complete the outstanding task to the reviewer ) --> Reviewer (Inspect and make a request to the Approver to approve and close the outstanding task) --> QA (finally close the quality notification after completion of all Outstanding tasks)
Thanks and Regards,
Kuldeep Verma

Hi Kuldeep,
You have to generate 3 SAP Login ID's like ...
1. Q_01 : Who will have the rights of Creating & Changing the Notification. He will also have the right to complete the Notification as wel as revoke it.
2. Q_02 : Who will have the rights to enter the details about the Task and its activities as you said fix a bolt on machine.
3. Q_03 : Who will have the rights to review the whole process thru closing the Task.
I feel that there is no need to have fourth one in picture as your all requirement can meet within these three.
Please revert with comments.

Automatic Creation of Quality Notification

Dear All,
In standard SAP whenever defects recording is done for an inspection lot and saved,automatically a quality notification is also created.In my business scenario they will record defects for almost all the inspection lots hence resulting in a huge number of unwanted quality notification which then later wont be processed at all.
Hence i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
Expecting your valuable comments
Regards
JR

Hi
i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
1.This is very much possible through SPRO setting.
QCC0>Quality planning>catalogs>select defect calss->
like for Minor defect-->remove Raido button & make it No active function
Just a suggetion ...what you can do for all Critical & major type of defect keep "Active Notification"
for Minor type of defects keep "No Act fuction"
this will reduce unnecessory notification.
2.If you permanently want to remove all notification after defect recording then
Go to Inspection type setting in SPRO & remove notification against inspection type.
QCC0>Qul insp>Insp lot creation-->maintain inspec type.
Regards
Sujit

Output needs to attach automatically after saving invoice

Dear Friends.
for my invoices output needs to be assigned automatically after saving invoice. as of now it not like that even though i created condition record. manually we can able to enter.
this process has to be applied for both manually and batch creation innvoices.
Please let me know your suggessions on the same soon.
Thanks
Raju.

Hi Raju,
check whether you have maintained print parameters in T code VP01 by selecting your output conditin type and also check whether the condition records are maintained correctly in VV31.
Regards
sankar

Automatic/Immediate print of quality notification after saving

Similar Messages

Maybe you are looking for