Enhancement to automate Quality notification after stock transfer posted.

Hi PP Gurus,
Here we need to create Quality Notification (type Q2 and Q3) only when Stock of material is moved to Blocked stock through movement type 344. If the material/batch is against vendor it should open Quality notification type Q2 and if it is against Production order it should open Quality Notification type Q3.
If anybody worked on such requirement please help.
Thanks & Regards,
Abu Arbab

Hi,
The development is done using MB_DOCUMENT_BADI (which will be triggered once document is posted against movement type 344), which eventually trigger FM IQS0_CREATE_VIQMEL.
Best Regards,
Abu Arbab
Edited by: abu arbaba on Mar 20, 2009 4:06 PM

Similar Messages

  • Automatic quality notification

    Hi
    I configure for automatic quality notification
    It is working good - if any one of MIC is out of spec. - qn notification  created for that mic- on line item created in QN notification -( for normal inspection )
    if it is free inspection point - any one of MIC is off spec -- QN notification created  - but wired thing is there are 2line item in quality notification ( both lines are associated with same MIC)
    even if I accepted the inspection point during valuation -- 2defect line is created
    I guess SAP is creating 2 item lines in defect record 9one for mic and another for insp.point identifier)
    please correct me if I am wrong
    another wired thing is  if i create another inspection point for same phase - off spec --> it is creating another 2 item line in defect & QN notification but the previous one item automatically deleted?
    is it std? or some thing wrong
    Can you plz guide me.  this is only for inspection points but fro normal inspection  one mic failure one defect line item.
    Thanks
    Sami

    Hi Gajesh,
    We are using Free inspection point (that is our requirement)
    2 line item get created in item overview of qn notification (2 line item created for defect record -QF02) even for one MIC was out of specification. in this case only one defect record/ on item should be created
    but it is not ?
    when I tested the same for normal inspection - it is creating 1 defect item in item overview of QN and also .defect record.(but 100 free inspection -SAP behave differenty)
    if my second inspection point identification has any one of MIC out of spec -  the second line item deleted from item overview of notification  (not over write becasue initally item no 1,2 after this  1,3  means item 2 deleted)
    is this std behaviour of free nspection point?
    or we can restrict?
    I didn't tested for 150 becuse we are not inspected based on time /qty -- we are testing any time any qty produced -- this is our requiremnt
    Can you please throw some lights??????
    Thanks
    sami

  • Suggest EnhanceMent For SALES area determination In stock Transfer.

    Suggest EnhanceMent For SALES area determination In stock Transfer.
    V02V0001 Sales area determination for stock transport order Doesnt Work,

    Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
    Create Purchase Order (ME21N)
    Create Delivery in background (VL04, VL10a, VL10C, etc)
    Change Delivery for picking / packing & PGI (VL02n)
    Create Billing Document (VF01)
    Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
    Incase of Inter-company, the process will be as under:
    Create Sales Order (VA01)
    Create Delivery (VL01N, etc)
    Change Delivery (VL02N)
    Create Billing Document (VF01)
    Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
    Regards,
    Rajesh Banka

  • Stock transfer posting

    Dear All,
    Pls explain me about the stock transfer posting with Tcode ????

    Hi,
    You can post both transfer postings and stock transfers in the SAP system. Transfer postings differ from stock transfers, in that transfer postings are not connected with a physical goods movement. They usually involve a change in stock type, batch number, or material number.
    An example of transfer posting is the release from inspection into the company's own stock.
    Stock Transfer Procedures
    There are three different procedures for carrying out a stock transfer:
    Stock transfer via stock transfer posting using the one-step procedure
    Stock transfer via stock transfer posting using the two-step procedure
    Stock transfer using a stock transport order
    T. codes are MB1B or MIGO
    Thanks,
    Kumar Arcot

  • Stock transfer posting MB1B

    Hi gurús,
                   Im doing an stock transfer posting between two differents plants, and the system show me the following error message:
    "No accts maintained for company code clearing between comp.cds XXX and XX1"
    Wich configuration is missing in our system?
    Thanks in advance for the help.
    Regards
    Enzo

    your going to transfer one company code plant to another company code plant?
    if yes
    ensure the settings in Company code clearings through  FBKP, Clearing between company codes

  • Automatic/Immediate print of quality notification after saving

    Hi,
    Checked numerous posts avialable on this requirement but after following the suggestion still facing the issue.
    Requirement is right after saving a quality notification print should be triggered.
    Following settings are in place:
    In Quality Notification print control
    -> Define Shop papers, Forms, Print programs (1. defined shop papers and assigned print programs 2. Assigned shop papers to notification types)
    -> Define Printer ( here under user-dependent print control with wild card * entries chose Print Now option)
    Thanks in advance.
    Regards,
    Ragahva

    Hi Raghava,
    If you have configured the notification print control setup correctly, then the next step to get a notification printed is to select the right shop floor paper and print it. To do that please select - QM02/QM03 => Notification => Notification
    Now select the appropriate Printer and the document you wish to get printed and print it manually.
    Please note that any notification type can have more than more than one Shop Floor Paper selected to be printed. If you wish to automate it based on User details, then I think you may need to work with the below exit -
    QQMA0014  QM/PM/SM: Checks before saving a notification
    Please note that you have to put a logic there to read the user's credentials and print the notification while saving. You can take clues form the below thread too -
    http://scn.sap.com/thread/3691375
    Thanks to the original contributors of the thread!!
    Thanks,
    Arijit

  • Quality inspection for stock transfer inspection type 8

    Dear Friends ,
    For inspection type 8 , when there is a stock transfer from plant to plant a inspection lot is created automatically
    and then the stock goes to QI and we do RR and UD and stock posting to Unrestricted stock if pass
    Is my understanding is correct
    Thanks & Regards
    Raj

    Hi raju
    ur understanding is correct after giving inspection type 8 in material master and ur transfering material from plant to plant then lot get genrated and after RR and UD it goes to unrestricted stock
    regards
    sachin

  • No Quality Inspection for Stock Transfer

    Hi,
    There is a scenario now in which a material is activated for quality inspection. This same material is also used for Stock transfer from other plant with same company.
    So if material if received using STO, how can I deactivate Quality Inspection and just transfer to unrestricted use.
    Thank You,
    Raymond

    Hi
    check user exit.
    QAAT0001 Inspection type determination different from variant 01
    You can install enhancement QAAT0001 ,the function modules contained in this enhancement are called up in the
    programs in which you can access the master inspection type if necessary.
    The inspection lot is then created with the inspection type that was
    determined using the enhancement.
    logic will be for STO it will consider Z mvt type of origin 08 ,for STO material activate a Z mvt type & do not tick on Post to inspection.
    For normal stock trnsfer system will create 08.
    I hope this will add some value
    Regards'
    Sujit

  • Alert notification whenver stock is posted to a Sto location

    Hi Gurus,
       My client has following requiremets:
    1  An alert notification to be generated to QC department whenever the stock is posted to the sto loc QCH1(inspection lot number should be updated in the alert)
    2  An alert to be generated QC department whenevr there is sales good return.(The sto loc is GRN1)
      Please guide me how this is possible.
      Do we need to use workflow or some enhancements.
      Please give details about how to proceed with the enhancements.
    Thanks iin advance
    Regards
    Ankush

    Hi
    I think you did not understand my earlier reply. Whenever GR is made when you tick print and choose individula slip in genral tab the requirement is triggered for a message. Utilize that for notification. It can be sent as mail or idoc which can be received in 3rd party system as well.
    In output determination for your inventory message schema you should have your output type. (config in output determination)
    Then maintain condition record in MN21 for your output type, transaction/event type WE, Print version is 1, print item also 1, and choose simple mail option, send immediatly option and in communication give receipient. It will work as a simple mail
    Regards
    Antony

  • Automatic quality Notification during defect recording

    Hi Guru's
    We have two plants , Plant A will be using the default Notification - F1 , F2 & F3 , plant B will use Cust. Y1 , Y2 & Y3 ,
    In t-code QF11 When activating notification type , system is picking the defaults ,
    My client requirement is that Notification type should match up to the inspection lot origin. For Ex
    Inspection Type 01 (GR for PO) >>  Inspection Lot Origin - 01 (Goods Receipt ) >>  Notification Type Default Setting (F2) >> Notification type Dropdown Options ( F1 , F2  & G0)
    Please tell how the dropdown option for Notification Type  can be maintained in QF11 during activation screen
    Regards
    cybrat24

    What I know is that you can not set the notification type in customization for inspection type depending upon the "Plant"
    First thing when you copy the notification from original F1 or F2 then system will show that in f4 option in customization.
    Second thing if you wish to have notification plant specific,then there can be one solution.
    Copy inspection type 01 say Z01.
    Assign customized notification type( copy of F1 or F2) to this inspection type.
    Activate only this inspection type in other plant.
    So for first plat default notification will be SAP default & for second plant it will be always say Y1 or Y2 etc.
    I hope this is possible !!

  • Stock transfer posting from plant 1 to plant 2 selecting VBR

    Hi All,
    A stock is transferred from Plant 1 to Plant 2 using MB1B transaction.
    Noramlly in all other similar postings it is selecting PDU Price difference relevant GL account.
    But in one transaction it is choosing VBR Consumption account.
    In Quality PDU is selected for same materials and posted correctly.
    So Compared the OMJJ in Quality with Production.
    Kindly let me know which config need to be checked.
    Regards
    Lakshmi

    Hi Lakshmi,
    Look for an entry -any entry- that has VBR for its account modification key under Account Grouping in t-code OMJJ. If you find one, compare the key fields to pinpoint the difference and determine why that particular entry applies in the production system. If you cannot, there should be a user-exit somewhere.
    Regards.

  • Quality Notification- Action Box

    HI,
    I am configuring Quality Notifications for Customer related defect and Material defect. In Action Box I have to include transfer posting from unrestricted to quality inspection and also transfer posting from unrestricted to Blocked stock.
    I want to know which functional module I have to include in customization of action box and also which Functional module should be processed when doing saving.
    I have used functional module QMLR_CREATE_INSP_LOT and Functional module which have to be processed while saving is QMLR_CREATE_INSP_LOT_STEP2 for vendor related defects.
    Now to configure Customer related defect and Material defect, what Functional module I have to use and what Functional module I have to use while to process saving.
    Thanx in Advance,
    Praveen Kumar

    Hi,
       Quality notification is like a complaint report. By using tcode QM01, you can create.
    In this give input of material no in reference object tab page.
    In subject give coding, ex.. rewok, rejection.and complaint qty.
    In execution give the coordinator name.
    After that release.
    Reward points if useful.
    Regards,
    Dharma

  • Stock transfer from excisable plant to nonexcisable

    Dear All,
    My scenario is i am selling (proforma invoice) material "Carton" from my XYZ plant(Excisable) to ABC plant(Non excisable)
    Also i am not paying for this and it will be against proforma invoice.
    Material value is 100 per unit with excise value 1021= 13 (which i have paid when procured the material)Total value = 113
    After stock transfer i want excise accounts of xyz plant should reversed (as i cant take benefit of this excise value which is 13 rupees) I want material master value of 100 rupees of my "Carton" material should get credited from my XYZ plant and material master of my ABC plant should get debited with 113 value (13 rupees of excise should go in material master value as this plant is non excisable)
    Please let me know how to configure the same / suggest the route to do the same
    Thanks,
    Naren

    Dear,
    But it is not getting loaded on material as you cant assign stock account again for another transaction key.(It is giving error that Already it is assigned for BSX)
    Entries happening are
    Stock account  - Credited from excisable plant's business area  - 100-
    Stock account  - Debited to non- excisable plant's business area - 100+
    Other losses material (key is AUM) - 10+
    Material overheads - 10-
    Please tell me the whole process
    Naren

  • Stock transfer between one ware house to another warehouse

    hi all,
           i moved the the stock within the warehouse(bin to bin).my client requirement is move the stock  from  one ware house to another warehouse  in same plant /storage location. so i need the configuration steps for that.
    appreciate your help always,
    yours
    muthuraman.d

    Hi
    Hope you are using different storage location for different warehouse within same plant.
    Use Movement type 311 - Location to location stock transfer to transfer the material from one warehouse to another ware house.
    Make the Auto TO enable  at the movement type level so that system will generate the TO automatically when you do the transfer posting. Also possible to confirm the TO autmatically at movement type level.
    Hope it helps.
    Thanks /Karthik

  • Assign Execute and Review for Quality Notification

    Hello Experts,
    Can we configure the workflow WS24500047 or is their any change in configuration in SPRO so that we can make the following business scenario.
    1- Quality Administrator will create quality notification in QM01.
    2- Quality Administrator will assign the task to the responsible person for eg. User1 is responsible to complete the task to fix a bolt of a machine
    3- After fixing the issue. User1 will make the the task complete and request to close the task
    4- Other User say Reviewer will see the request from User1 and finds the the task is properly done and he will make a request to the approver to close the task
    5- The approver will approve the request and close the task.
    6- And if the all the task of the quality notification is complete then
    quality administrator will complete the quality notification and close the task.
    in other words.
    QA (will create the Quality notification and assign to user) --> User1 (Fix the issue and make a request to complete the outstanding task to the reviewer ) --> Reviewer (Inspect and make a request to the Approver to approve and close the outstanding task) --> QA (finally close the quality notification after completion of all Outstanding tasks)
    Thanks and Regards,
    Kuldeep Verma

    Hi Kuldeep,
                       You have to generate 3 SAP Login ID's like ...
    1. Q_01 : Who will have the rights of Creating & Changing the Notification. He will also have the right to complete the Notification as wel as revoke it.
    2. Q_02 : Who will have the rights to enter the details about the Task and its activities as you said fix a bolt on machine.
    3. Q_03 : Who will have the rights to review the whole process thru closing the Task.
    I feel that there is no need to have fourth one in picture as your all requirement can meet within these three.
    Please revert with comments.

Maybe you are looking for