Automatic numbers of TOC and references are exchanged

Mac OS X 10.6.4 DE
InDesign CS5, 7.0.1 (DE)
Have a document formated with paragraph styles like title1, title2, text, etc.
Let this document start with a 2 digit number like 10 or 69, should have enough pages and titles 1 to fill later the toc frame
1. Create a table of content style, every occurance of title1 will create an entry, create a title with a style which will span all columns
2. Make a frame on the first page (or where you want to place the table of content.
3. This text frame has a corner effect on only 1 corner, the lower right corner is rounded with 14pt radius
4. Place in this frame the automatic generated TOC (or any automatic generated reference)
RESULT
In the first column the page numbers are switched:
Instead of page 70 I have page 07
71 > 17
72 > 27
and so on
WHAT CAN HELP?
Turn off any corner effects to this frame.

What I want is:
1. Bring the bug to attention, so that no one falls into the trap and does not deliver files with wrong number.
2. Bring it to attention to the English readers because they are more than German ones and in this group we will find also the product engineers.
I have filed a bug against it as I do always. I am sure that this behaviour is a bug, not a bug between chair and keyboard.
In a German graphics forum Windows users have confirmed this bug on their side too.
What I don't know, if the bug also applies to CS5 7.0 because in German all users have 7.0.1 which is only available in German and Swedish.

Similar Messages

  • TOC and playbar area - Adobe Captivate6

    I would like to be able to add buttons (smartshape used as button) into the TOC area and/or the recorder playbar area (playbar hidden).
    Is it possible to "script" your own controls within either of these sections? say, instead of using default playbar of Captivate6

    If you know enough ActionScript 3 you can create your own playbar.  The TOC is a different matter.  I haven't seen that done by anyone other than Adobe.

  • How to make sure your primary and standby are exchanging

    Hi all,
    how can I make sure my redo are applied to the standby?
    thanks

    I used:
    on the standby:
    select sequence#, applied from v$archived_log;
    and that gives the information needed, also I have queried the logs I had on the primary by issuing:
    select sequence# from v$log order by sequence#
    to get the last sequences and found that there is one difference between the result of the queries and that is due to the current log in the primary is not been transferred to the standby, and by issuing on the primary :
    alter system switch logfile;
    the last sequence is now archived and transported to the standby

  • RoboHelp 9 - problem with merged TOC and index

    Using RoboHelp v9.0.0.228 I have a master project which contains several merged TOCs and indexes for other CHMs. This has worked successfully for years, but has now stopped working in our translated CHMs. I have checked all the relevant settings and they appear to be correct. The English version still works correctly. Can you help please? Many thanks.

    OK, so my post was just a summary really!
    I have a main project with its own TOC, index and topics. I then have several other projects with their own TOCs, indexes and topics, and these are merged into the master TOC. In all these projects, we use the indexes to contain function ids for our software, so that when you press F1 in a software function, it invokes the correct Help topic in the CHM. The software is coded so that it goes to the main project first, and then looks in the merged index to find the link to the Help topic.
    In the individual sub projects, the TOCs and indexes are present and work correctly. Also, in the master project, the TOC and index works correctly in the original English version. However, even though the TOCs, indexes and topics are all present and correct in the translated versions (Russian, for example) the index in the master project does not contain the entries for the sub projects. The TOCs for the sub projects do, however, work correctly.

  • I have the ipad air and the iWork apps and iMovie and iPhoto are not free.

    I purchased the iPad Air on November 1st and it is advertised that Pages, Numbers, Keynote, iPhoto and iMovie are free. But none of them are free.

    Before you can download free apps:
    1. Make sure you are using IOS 7.
    2. Make sure your iPad is registered in My Support Profile. If not, go ahead and add to your profile.
    https://supportprofile.apple.com/
    3. Try downloading again; it should be free.
    If you need serial number, it's here:
    Settings>General>About

  • I had previously purchased the programs "Pages" and "Numbers" and they are on my iPhone and iPad I was told that the programs would automatically copy a version of itself for the iMac to be running them but I don't see it installed. How can I install them

    I had previously purchased the programs "Pages" and "Numbers" and they are on my iPhone and iPad I was told that the programs would automatically copy a version of itself for the iMac to be running them but I don't see it installed. How can I install for free?  I see that I could go to the apple store and purchase them again but I belibve that since I had already purchased them; I would get a free copy for my Imac.  Do I got something confused here?  Please help.

    Whoever told you that was misinformed or lying. Those applications are sold separately for the iOS platform and the Mac platform.
    Go to the Mac App Store to purchase Pages and Numbers for your Mac. They're $20 each. If you are running an older version of Mac OS X that can't use the Mac App Store, you can purchase install media from Apple.

  • Acrobat 9 Pro: Links to Word TOC and cross references are lost

    I'm testing Acrobat 9 Pro and while it successfully creates a PDF from Word 2003 with bookmarks, all my TOC and internal page reference links are lost.
    I have triple checked the conversion settings from the Adobe PDF menu option in Word, and the "Convert cross-references and table of contents to links" check box is definitely selected.
    I used the same Word document on another machine with Acrobat 6 Pro installed - and the TOC and cross ref links were created successfully. As far as I can see the Adobe PDF settings in Word 2003 on both machines are the same - the only difference is that one uses Acrobat 6 Pro and the other uses Acrobat 9 Pro.
    The only setting in 9 Pro I turned off was the 'enable accessibility tagging' one; it's also turned off in 6 Pro. The remaining settings are the default.
    A clickable TOC and internal links is essential for my clients who often have 400+ page documents.
    Anybody have any suggestions? Or can anybody confirm that they do/don't get the same behavior in Acrobat 9 Pro?

    Thanks Abhigyan - your test PDF worked fine for me.
    This is what I've done today:
    1. Checked for all instances of pdfm*.dot files and removed any that were lurking in old Application Data and Microsoft Office folders.
    2. Deleted all Acrobat 5 and 6 folders and subfolders still lurking in Program Files.
    3. Used Add/Remove to delete Adobe Reader 8 and its updates. I figure I can always install Reader 9 if I need it as a separate app.
    4. Checked that everything was gone using the Windows Installer CleanUp utility (it was).
    5. Restarted my machine.
    6. Turned off my anti-virus software.
    7. Did a search for any pdfm*.dot files - found one only in the current Microsoft Office folder and left it there.
    8. Reinstalled Acrobat 9 Professional.
    9. Opened my test Word 2003 document.
    10. Checked all the Acrobat conversion settings and left them as the defaults.
    11. Converted the doc to PDF and checked for internal links. Yes! The TOC links worked! But my joy was short-lived as the page link didn't work...
    12. Tried various other conversion settings based on some suggestions from Lance in first level Adobe Support yesterday - still no page link. And I also lost the TOC links when I cleared the Enable Accessibility check box on the Settings tab of the conversion settings.
    13. Checked the Edit > Preferences > Convert To PDF settings for Word in Acrobat 9 - add bookmarks and add links are both selected (default).
    14. Used Acrobat 9 to create the PDF (File > Create > From File) hoping that this might might a difference. Nope. No TOC or page links.
    15. Changed conversion settings back to default via Word 2003, and created a PDF from a longer document. Again the TOC links worked, the URLs worked (they always did), the bookmarks worked (they always did too), but the none of the internal page cross-reference links worked.
    So my summary is this:
    * I can only create TOC links *if* Enable Accessibility is turned on, but I have always turned this off in earlier versions of Acrobat as I don't need it and it made the process of creating a PDF from a long document incredibly slow - I'm wary of using it!
    * I cannot get internal page links to work at all, no matter which method I use to create the PDF (from within Word or within Acrobat), and no matter which conversion settings I select.
    I really don't know what to try next. Manually creating links for what could be hundreds of cross-references in a single document is NOT an option, especially as I have many of these long documents.
    Any further suggestions?

  • TOC and Cross reference bookmarks

    Hi. I recently finished work on a book that had front matter containing a brief TOC and a detailed TOC. The book also contained individual TOCs at the beginning of each chapter.
    I updated all numbering across the book files before generating the TOCs in the front matter, then generated the brief and detailed TOCs using my TOC Styles. However, I assigned cross references for the individual chapter TOCs. May not have been the best choice.
    Because there was special styling for some of the front matter TOC entries that wasn't easily specified using just the TOC Styles, I cut and pasted groups of entries from the generated TOC on the pasteboard into a new frame on the page. I checked in Story Editor to ensure that the invisible markers for the TOC entries had been copied into the new frame.
    When I exported the files to PDF, the TOC entries no longer pointed to the correct pages. They simply pointed to the first page of the PDF when clicked. Furthermore, no bookmarks showed up the TOC entries in the Bookmarks panel, even though I had "Create PDF Bookmarks" checked in my TOC Styles.
    I have three questions, then:
    --Is there any way to reclaim the behavior of the TOC bookmarks, and their display in the Bookmarks list of the PDF, if the entries are copied and pasted into a new frame in InDesign, without doing this manually in Acrobat Pro?
    --Is there any way to get cross references to display as bookmarks in a PDF, assuming that I needed to make individual PDFs of each chapter, without doing this manually in Acrobat Pro?
    --I'm betting that all files should be exported from InDesign as a single PDF in order for all TOC and cross reference links to work properly, without manual intervention in Acrobat Pro? If so, and manual intervention is required, is this accomplished by cataloging/indexing in Acrobat Pro?
    I need to be able to pass this information along to a publisher who is now requiring all of their compositors to submit bookmarked PDFs with their printer files. I'm pretty sure I know the answer to this one, but I would like verification from the pros here. Thanks!

    Hi. I recently finished work on a book that had front matter containing a brief TOC and a detailed TOC. The book also contained individual TOCs at the beginning of each chapter.
    I updated all numbering across the book files before generating the TOCs in the front matter, then generated the brief and detailed TOCs using my TOC Styles. However, I assigned cross references for the individual chapter TOCs. May not have been the best choice.
    Because there was special styling for some of the front matter TOC entries that wasn't easily specified using just the TOC Styles, I cut and pasted groups of entries from the generated TOC on the pasteboard into a new frame on the page. I checked in Story Editor to ensure that the invisible markers for the TOC entries had been copied into the new frame.
    When I exported the files to PDF, the TOC entries no longer pointed to the correct pages. They simply pointed to the first page of the PDF when clicked. Furthermore, no bookmarks showed up the TOC entries in the Bookmarks panel, even though I had "Create PDF Bookmarks" checked in my TOC Styles.
    I have three questions, then:
    --Is there any way to reclaim the behavior of the TOC bookmarks, and their display in the Bookmarks list of the PDF, if the entries are copied and pasted into a new frame in InDesign, without doing this manually in Acrobat Pro?
    --Is there any way to get cross references to display as bookmarks in a PDF, assuming that I needed to make individual PDFs of each chapter, without doing this manually in Acrobat Pro?
    --I'm betting that all files should be exported from InDesign as a single PDF in order for all TOC and cross reference links to work properly, without manual intervention in Acrobat Pro? If so, and manual intervention is required, is this accomplished by cataloging/indexing in Acrobat Pro?
    I need to be able to pass this information along to a publisher who is now requiring all of their compositors to submit bookmarked PDFs with their printer files. I'm pretty sure I know the answer to this one, but I would like verification from the pros here. Thanks!

  • How to set different font for numbers in headings and TOCs

    Hi,
    I've noticed some people use a different font for numbers in headings and TOCs to get some extra magic. Is there any way to automate such use of fonts in the paragraph styles?
    Oh, and any suggestions on what fonts would be good for numbers?
    Thanks!

    I was merely continuing on the original theme -- any digit in any character style. It was only later revealed that (a) the OP needed old style figures, and (b) those were available in his font from the start.
    The negative lookahead is the answer to his question (copied in full now)
    Based on the above InDesignSecrets tutorial, does anyone know what to do if some of the numbers end with a dot or a comma?
    Like the Norwegian date format: 13. mai 2009
    Or the Norwegian way of pricing items: 2900,-
    and my example shows it can be done, but with an added caveat. If digits are to be set in red, using the exceptions the OP asks for, my example sentence will come out as
    "Think of a number between 1 to 10, but don't use 9."
    rather than the (here) intended
    "Think of a number between 1 to 10, but don't use 9."

  • Automatic creation of Company Code and Sales Area Data for Customer Master

    Hi,
    We have a organisation structure setup with multiple company codes and sales areas.
    A customer will be created using VD01 via the Sales Order VA01. Because the customers are created using VD01 we need to automatically extend the customer for the various company codes and sales areas. The data on these views will be populated using reference customers.
    Any recommendations on the best approach (technically) to auto extend the customer master would be appreciated.
    I'm reluctant to use BDC's because of performance. We are in a Retail environment.
    Thanks in advance
    Craig

    The sample code has been taken from the SAP notes - in which have the affected as outlined in the example.
    The codes does not do what my requirements are, which is to identify the next available number in isolation of the BP type.

  • Automatic Payment program for Bank bills and Bill of Exchange.

    Helllo Sapients,
    I need to configure Automatic Payment Program for Bank bills and Bill of Exchange. This configuration is for Europe, where Bank bills are very common.
    Can someone advise me or send me the configuration steps for the same.
    Thank you
    Naman

    Yes, as long you have an open item on the customer account that needs paying.
    In F110 you see vendor_and_customer in the parameter screen.
    Hth
    Hein

  • How do I copy my old xl files from my XP machine to operate on xl for Mac on my new iMac.  When I copy them onto a stick and transfer them it automatically makes them xls files which are then corrupted when I try to open them in xl for mac

    How do I copy my old xl files from my XP machine to operate on xl for Mac on my new iMac.  When I copy them onto a stick and transfer them it automatically makes them xls files which are then corrupted when I try to open them in xl for mac

    Sorry, yes this is Microsoft Excel.  The Microsoft XP has Excel files denoted as xl, the later versions of Microsoft Excel are denoted as xls files.  The later verions of Microsoft Excel open the xl files OK, does Excel for Mac not able to do this?

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my com

    My assistant and I are using two Lightrooms (i.e. two serial numbers) and need to share between our two computers. I provide originals to her onto a flash drive. She tags them and returns them to me. I then copy the photos from her flash drive onto my computer and load them in my LR. The photos appear but witthout any editing or tagging. We need to be able to have her working on the photos on her computer with her copy of LR and me on my computer with my version of LR being able to access what is already tagged and given back to me. This seems hard. We need advice on if it is at all possible to have two computers simultaneously working on LR . I bought her her own version because I was told at the time of purchasing that that was the only way to share. Please advise urgently! Thanks.

    Sounds like your assistant isn't instructing Lightroom to write the tagging and editing to the files themselves, so wehn the files return to you, they don't have editing and tagging information. She need to select the photos in Lightroom and then Ctrl-S (Cmd-S on Mac). Or alternatively turn on the option to autmoatically write this information to the files.
    If you are using RAW photos, then this information will be written to a sidecar XMP file, and your assistant must provide you with the sidecar file. If these photos are not RAW photos, then the information is written directly into the photo file itself.
    Lightroom wasn't designed to be a multi-user program, and so it is truly not possible to have two people working on the same catalog at once. The way you are doing things, as modified above, is probably the way to go.
    As an alternative, you can transfer (portions of) catalogs as well as photos back and forth and then all of these issues disappear, but a catalog might be rather large for a flash drive (or maybe not, it depends)

  • How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something if i use firefo

    How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something when I use mozila firefox?
    Windows Computer

    1) If you are talking about the file names on the computer, there is a
    setting to turn off known file types. Open your file browser. Then
    just under the location bar, press '''Tools,''' then '''Folder Options.'''
    A new window will open. Select '''View.''' Look for
    '''Hide Extensions For Known File Types.'''
    2) Never NEVER '''NEVER''' download anything unless you know what
    it is. If a web site claims it needs to download something, what is it?
    It could be something like the flash player, '''or a virus ! !'''
    Ask questions, or go somewhere else.

Maybe you are looking for