Automatic Orientation Adjustment stopped working

Does anyone know how to explain (what to do) if the IPhone 3G no longer adjusts for Landscape or Portrait directions? Is it a setting or hardware issue? I have done all resets, etc.

If you have done all the resets, etc., with no change, very more than likely this is a hardware issue since there isn't a setting for this. If not caused by accidental damage, this will be covered under the warranty.

Similar Messages

  • Automatic brightness adjustment not working properly

    Hi, i bought a macbook air 2013 in july. about 2 weeks ago i discovered the automatic brightness adjustment and checked it was working correctly. about a week ago i realized it wasnt. i turn the lights off (or cover the sensor next to the camera) and the keyboard light dims instead of increasing its intensity. and the exact opposite happens when the lights are on.
    i have already restarted the system managment controller as it is explained here: http://support.apple.com/kb/HT3964 but the problem persists.
    and of course i have checked the adjust keybord brightness box in the keyboard settings.
    i dont now what else to do. any help would be very much appreciated.

    A new Mac is in warranty for 1 year from the date of purchase.
    Contact Apple.
    Best.

  • Automatic address completion stops working after upgrade

    I recently upgraded a PowerBook G4 to Leopard. It was actually a clean, ground-up install. I configured Mail to connect to Apple's server, and all the mail was downloaded as expected.
    Just one problem - the autocomplete feature for addressing mail seems to include only addresses entered since the upgrade. Is there any way to get it to scan the complete list of e-mail to populate the previously used addresses? By the way, the auto complete feature IS enabled in preferences, and it DOES work with addresses that have been used since the upgrade.
    Thanks for any help!

    Thanks for the response - I can't argue with you regarding the possibility of cramming the recent addresses list with crap.
    To answer your question, it does populate from AB and from recent addresses added since the reinstall, it is the less recent but still relevant addresses that I'm trying to get.
    The situation is that this is my elderly mother's computer, and she has grown accustomed to using the automatic completion feature (accustomed meaning dependent upon). The upgrade turned into a clean install unintentionally, and the question is how can we repopulate.
    Ideally, there would be some way to tell Mail to scan the "Sent" mailbox for recent addresses to populate from. If I have to essentially go through her sent box and make AB contacts out of the addresses, I'll do it, but I'm really hoping there is an automated approach.

  • Automatic backlight adjustment not working

    Hello,
    My 2012 13inch MBA is from this July, and I never got the automatic backlight of the keyboard to work.
    I can manually turn on/off the backlit keyboard, but the automatic setting doesn't do anything.
    Even in a pitch black room, the keyboard won't light up.
    My 2007 Macbook Pro had this feature working like a charm, so I wonder why it doesn't work on my new machine.
    The MBA is running Mountain Lion with the last 10.8.2 update.
    Any idea guys?

    A new Mac is in warranty for 1 year from the date of purchase.
    Contact Apple.
    Best.

  • Camera's automatic focus function stopped working. Factory reset did not work. (Yes the three dots were pressed). What should I do?

    I enjoyed taking pictures with one touch of the screen but now the camera does not focus no matter what I do. I did try to take it without the camera sub-menus by pushing the button with three dots and without. The focus simply does not work!
    What should I do?
    I contacted LG support and they told me the whole thing might take 1-2weeks. That seems too long for me to live without a phone. Any suggestions?
    Thanks for reading my question,
    Josh

        Let's get this resolved kimjoshy! If you completed a factory reset and still unsuccessful please respond to my direct message so I may review options. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • Automate PDF Presentation stopped working

    I use the Automate -> PDF Presentation function all the time, and it suddenly isn't doing anything. It lets me into the dialogue to set everything up, and it looks normal, but when I hit "save" nothing happens. I've tried going back to files I've used in the past to create multi-page PDF documents and still nothing.
    I have Photoshop 3 v. 10.0.1 for Macintosh OS X 10.6.6 and Adobe Reader 8.2.6
    Thanks for any help.
    Christina

    Yes I support this. The ability to create multiple page PDF's directly from Photoshop should never have been removed.
    Looks like at one point someone in management at Adobe had the smart idea that Bridge would be some kind of 'hub' that every user would see the sense in using. A kind of asset management alternative to the Operating System. Never really took off. Why?- because the OS got considerably better at previewing images and assets. Well for some of us. And Bridge itself had too much overhead.

  • Realtime volume adjustment stopped working

    I've been pulling my hair out with this one yesterday and today and haven't been able to find a solution anywhere.
    For some reason Audition has stopped playing back any adjustments that are made to volume in realtime. What I mean is that during playback i'm writing adjustments to the volume automation of a track but hear no change in volume unless I stop and restart playback.
    This is proving really annoying and has slowed my workflow massively despite a big deadline looming at the end of today. Does anyone have any suggestions what might be causing this? I've even reinstalled Audition already but no change.

    Where are you making these adjustments to audio levels? Are you using the on track yellow line Volume Envelope or are you using Volume Envelopes on the Automation lane for that track?

  • Photostream automatic upload stopped working

    I have an iPhone 6 and Windows 8.  I'm assuming this is a glitch with Windows 8, as I was able to automatically upload pictures to my old laptop (not Windows 8).  Anyway.... the automatic upload/photostream stopped working mid-December.  It is turned on to automatically upload!  But now I have to go in and import pictures if I want them saved to my laptop.  Any ideas on what's causing this or how to fix it?  Thanks!

    In my opinion, it's a VERY DANGEROUS option to select. Bad
    things happen
    and when they do, you have lost your "gold standard" copy on
    the web by
    automatically overwriting it.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "red5leader" <[email protected]> wrote in
    message
    news:eir2a4$h25$[email protected]..
    > Edit the Site Definition - on the Remote Info TAB is a
    checkbox for
    > "automatically upload files to server on save"
    >
    > I tried that for a while - was more hassle than it was
    worth to me.

  • HP Officejet Pro L7590 printer auto document feeder stopped working

    HP Officejet Pro L7590 (Model: CB822A)
    Mac OS X Yosemite 10.10
    My automatic document feeder stopped working about a month or two ago. If I put a bunch of papers under the tray there is no beep/light to acknowledge that. So, I can't copy a bunch of papers at once. 
    Is there a recommended HP repair center/store in my area that can fix it? I'm in Bethesda, MD 20817.
    Thanks
    This question was solved.
    View Solution.

    Hi @rustyblue 
    Although HP does not have an authorizes repair facility that I can refer you to, I have located 2 helpful documents that would allow you to troubleshoot the issue yourself;
    An 'Original Jam: Clear jam, and then press OK' Message Displays for HP Officejet 6100, 7100, and D ...
    Automatic Document Feeder (ADF) Does Not Pick Up Paper
    If the issue persists, you can take the printer to a local mom and pop shop, or maybe call HP. HP could offer you a discount on a newer model.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Wacom Tablet Pen Pressure stops working in Photoshop after using Lightroom Local Adjustment Brush

    Hi all,
    I am experiencing a problem with my Intuos Pro Medium (driver 6.3.9w3 on Windows 8.1)
    I am using Lighroom 5.6 and Photoshop CC 2014.
    I an get the pen pressure to work in Photoshop without any problem. However, if I go into Lightroom and use the Local Adjustment Brush and then transfer the photo into Photoshop (Right Click Edit In => Edit in Adobe Photoshop 2014 CC) then the pen pressure stops working in Photoshop.
    Really frustrating... The only workaround is to close both Photoshop and Lightroom, then reopen Photoshop, then usually the Pen pressure feature starts working again.
    Has anyone experienced this before or has any idea how to fix this?
    Thanks,
    Guillaume

    Your tablet driver isn't reporting pressure correctly.
    The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
    Contact your tablet maker to see if they have updated drivers to fix their bugs.

  • DI Server stopped working after automatic Windows Server 2003 update

    One of my customers is running SBO 2005A SP1 PL22 in Windows 2003 Server environment.
    They are also using DI Server as an integration tool. On September 11, DI Server suddenly stopped working. They just get the notorious -1 / Could not commit transaction error message on each login attempt. I have tried all the usual and unusual quick fixes to resolve the issue, but nothing seems to help.
    To make things odd, I was successful a couple of times when I experimented with different login messages. For instance, if I omitted the <language> and <licenseserver> elements from the message, I was able to get through once. However, a new attempt with the exact same message failed again. Thus the DI Server is not completely down, it's just in some kind of limp mode.
    I checked what had changed that night and I realized that there had been huge automatic Windows updates on the evening of September 10, 2009. There was IE8, .NET Framework 3.5 SP1 and a huge array of security etc patches that had been automatically installed. I'm pretty confident that one of these is the cause of the problem. However, I would hate to blindly roll all those updates back.
    Is there anyone out there who's had this same problem and possibly found a cure ?
    As the customer is running a version that's no longer supported, no support can be expected from SAP. They will just tell us to upgrade to 2007 before any further help is given. Weill, it seems that people out here in the SDN usually have a much better knowledge about the product than SAP does
    Henry

    Hi Gordon,
    Is DI Server really using some version of the .NET framework? If so, do you know which one ?
    Best Regards,
    Henry

  • The adjustment brush suddenly stopped working in Lr CC (among other things)

    1. All of a sudden the adjustment brush stopped working in my Lr CC. The little buttons that you can click on to activate your adjustments are gone and when I open files where I have done adjustments they are still there but no "buttons" to click and consequently I can not make any changes or new adjustments. For example; in the image I have inserted I have made adjustments with a) Sharpness, b) Skin Softening and c) Iris Enhance and the adjustments are still there but no "buttons" any more and therefore I can´t change anything. I edited this image April 29 and 30 when Lr still worked fine. Today (and yesterday) things has really start spooking around with Lr.
    2. After having saved an image in Ps CC as a psd-file going back to Lr CC for cropping Lr continuously reloads and resets all edits that I have done or are trying to do.
    Everything has been working earlier but the past two days things like the above has stopped working.

    Well, all problems regarding this are solved after having talked to Adobe's support. After having backed up my lrcat we deleted the Lightroom 6 plist, emptied the trash can and then restored Lightroom to its default values during the start-up process.

  • Photoshop CS6  /automatic update/stopped working

    After automatic update from adobe I believe this was the first one for Photoshop.... my Photoshop stopped working I can't download any work, and when I opened Photoshop it said that there are some things not available now.... which I can't remember what... but this happened right after the update from adobe (thanks for that kind of updates - I can do it without) what do I do now .. geniuses? I paid only 3k for this and now i can't use it? Because you decided to updatd?
    Please Advice? I don't need updates from you if after an update I can't use my needed program!  I have a job to do you know.

    Sylviab do you receive any specific error messages?  Also which operating system are you using?  To avoid duplication what have you tried so far to resolve your current difficulties?

  • When trying to login to iTunes I receive a message iTunes has stopped working, a problem caused the program to stop working and then iTunes is automatically closed

    When trying to login to iTunes I receive a message iTunes has stopped working. A problem caused the program to stop and iTunes automatically closes.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Adjustment Brushes in Lightroom 3.6 have stopped working on my iMac

    I have Lightroom 3.6 loaded on my iMac v10.6 and have been using it continuously for some time.     For the second time in just a few weeks the Adjustment Brushes/Sliders have stopped working correctly, that is there is no noticeable adjustment on my image [for example Brightness, Exposure, Clarity etc.].      I cannot remember what I was told to do to correct this problem last time I had to contact Adobe Support about this issue,  and I'm told I now have to pay for support for this product now as Lightroom 4 is released.
    Is there a way I can fix the problem?
    Thank You.

    You've checked the density and flow sliders are set high enough?
    Resetting your preferences would be next port of call http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1148/198/how-do-i- delete-the-lightroom-preferences-file

Maybe you are looking for