Automatic plan enrollment error solution required

I am facing an error in enrollment in SAP HR Benefits module. The config is as below
--Unimed plan is to be made mandatory. For this, I have configured the plan as "automatic" plan
--Maintained IT 171 for the employee.
--The automatic plan option appears in enrollment. But when I am trying to view the automatic plan for an employee, I am getting the error as "Calculated prcoessing end date is before the start date".
--This error is coming for all the employees
--The F1 for the error message states: HRBEN00FMODULES218
Kindly reply at the earliest.
Thank you very much

Hello,
This seems your start date and end date are not matching.
meaning your end date is prior to start date. it should be bigger than the start date.
try out this.
cheers

Similar Messages

  • ICF Error solution required urgantly

    Hi,
    Please let me know answer for below mentioned error.
    Error when processing your request
    What has happened?
    The URL http://cccdeve1.coopercameron.com:8000/sap/bc/webdynpro/SAP/QISR_UI_FORM// was not called due to an error.
    Note
    The following error text was processed in the system CCD : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
    The error occurred on the application server cccdeve2_CCD_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
    Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CCD in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cccdeve2_CCD_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cccdeve2_CCD_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 500 -u: 74984 -l: E -s: CCD -i: cccdeve2_CCD_00 -w: 0 -d: 20081006 -t: 073709 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Thank you,
    Laxmikant

    Hi,
    You need to check ADS config correctly.
    As per my understanding 1.Web AS Java in R3 and 2.normal Web AS server are seprate urls.
    There is confusion about these url and ads_user.
    ADS_USER in R3 password must match with ADS_USER in Visual administrator.
    You need to refer ADS guide step by step with other currently correctly ADS running with adobe Interactive forms.
    This will slove this problem.

  • Creating a planned order with error "Material requires configuration"

    Dear All,
    I am facing a problem for creation of a planned order with error "Material requires configuration".
    To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
    However, the system still does display the same error.
    Could you please help provide possible solution for this?
    Regards,
    Phong

    See also the following blog post:
    Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
    BR
    Caetano

  • Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data)

    Dear all,
    Can any one explain about this error,
    2014-11-02 19:19:29.58    *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-11-02 19:19:29.58    *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-11-02 19:19:29.58    Deleting log backup file. File: '\\Jdccb-mis\logshipping\JDCCBPROD_20141030134512.trn', Last Write Time (UTC): '10/30/2014 1:45:13 PM'
    2014-11-02 19:19:29.60    *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) *****
    This errors comes on My Secondary server during log shipping and database goes to restore mode.
    satish Kumar

    Hi Krishnp,
    These are the latest jobs in queue:
    89 Quadro de Horários 28/6/2014 1:45  N/D Arquivar Configurações do Sistema Aguardando Processamento 0%  
     88 Quadro de Horários 28/6/2014 1:30  N/D Arquivar Modos de Exibição do Project Web App Aguardando Processamento 0%  
     87 Quadro de Horários 28/6/2014 1:00  N/D Arquivar Campos Personalizados Aguardando Processamento 0%  
    When I delete the last work automatically related are excluded.
    Currently the queue is 406 jobs.
    David Soares MCTS:MBS - MCTS - MCITP

  • Error "field required" in master-detail form with FORMS 10G!!

    I have a Master-Detail Form.
    When the cursor stay in detail block and i chage the master record with the mouse, clicking in scroll bar, i get error "field required".
    In Forms 6i, works fine!!

    Master block has more than one record displayed. When I click on any item in detail (except first one) and then click on different master record (return navigation to master block, but not current record) I have FRM-40202: Field must be entered on first item in detail block.
    I found that reason is this part of clear_all_master_details procedure (automatically created by Oracle Forms):
    IF :System.Cursor_Item <> startitm THEN
    Go_Item(startitm);
    Check_Package_Failure;
    END IF;
    Does any have same experience?
    Is it Oracle bug or I am missing something?

  • Automatic Plan Order Creation on Sales Order save

    Hi friends,
    We are having an requirement where Automatic Plan Order should be created on Sales Order saving.
    We have Material A in Plant 1000 & Plant 5000.
    Plant 5000 in plant where Manufacturing is carried out & Plant 1000 is service Plant.
    We are using Special Procurement key for Material A in 1000 Plant which triggers procurement from Plant 5000.
    When Sales Order is entered in Service Plant 1000, after saving Order Plan Order should be created in both Service Plant 1000 & Manufacturing Plant 5000 along with Sales order reference.
    I have tried using Strategy Type 81 but Plan Order is created while saving Order only in Service plant (1000), but with Procurement Type (E - In-house Production) & No Plan Order created in Plant 5000.
    Can you please guide me how to meet requirement?
    Thanks in advance.

    Hi Jiaul,
    Thanx for reply.
    I have already assigned the Special Procurement Key to Material A in Plant 1000.
    In Plant 1000 procurement type is F (External procurement)
    But when Plan Order is created after saving Sales Order it is created with Procurement type E (In house production).
    If I delete Firm Plan Order generated & run MRP for Sales Order / Item. It gives me required output generating Plan Order in both Plants.
    Regards,
    Rameshvar

  • Script error "object required" when log off

    I have created a new user and assigned the "Everyone" role to it. I log in to the portal using this new user. Then I press logoff. Then I press OK. Now I get the script error below:
    line:91
    char:8
    Error: Object required
    code:0
    URL: http://.....
    any idea why I get this error?
    note: I don't get a logoff error when I use the administrator or other user IDs.

    Hi,
    you are using a customized masthead. InSP14 SAP changed some Javascript and therefor, the "object" your are colling in your logoff() function is missing. You'll have to comment out this JS call in your masthead. Check the IE error message explanation, it will show you the line where the error occurs.
    I've already posted the solution in this forum, but unfortunately, I'm not able to find my previous post
    br,
    Tobias

  • Planning Provider Error

    Hello,
    In Planning Ad-hoc using SmartView, when I retrieve large amounts of data I get "Planning Provider Error". I looked at the logs and WebLogic Admin Server console and it seems Planning is running out of Heap memory during huge retrivals. I added statup attributes to Planning Application server through WL Admin Server console to Xms1024m -Xmx1024m -XX:MaxPermSize=1024m but still got the same issue. I also noticed that even after restarting the Planning service, the Admin console still shows as max available 512m. I even restarted the WL Admin server but no luck.
    I am sure a lot of you would have optimized the WL. Am I doing the steps right? Should I be doing something differently? Where can I check to see if the changes were implemented?
    EPM 11.1.2.1
    Win 2003 64bit
    Server memory 8GB
    Thank you!

    If you are starting up the planning app server using a windows service then you would need to update the JVM max in the registry, they will be under HKLM\SOFTWARE\Hyperion Solutions\Planning0\HyS9Planning
    If you are just trying to retrieve large amounts of data you could try connecting to essbase instead of going through the planning layer, this should hopefully improve the retrievals.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Benefit plan enrollment

    Hi All,
    Please help me in the following :
    As per my Business requirement i need to delimit a Benefit plan becuase that plan is no longer existed in their business effective form 01.01.2009. So as per their requirement i have deleted the master data records existed after 01.01.2009. Now i need to do some functional configuration so that end user will never enter the data for the "Actions" done through PA40.
    This plan is not coming any actions performed enrollment.  before the changes itseld  this plan is not enrolling. i need to show my user that  plan is not active in the enrollment for any of the actions through PA40. and  note that this is  "Default Offer plan".
    I can delimit and closed the plan effective form 01.01.2009. Before that i have to make sure that this plan enrollment is possible if plan is
    "OPEN".
    Can any one help me how can i show this plan into the action.
    Thanks & Regards,
    Naga

    problem solved

  • Afxwin.h(112): fatal error C1189: #error : MFC requires use of Winsock2.h

    I am trying to build libfreenect lib files.After,successfully making the solution file using Cmake (Following all the procedure as described in Openkinect); while I am trying to build the solution,I am getting the following error.
    afxwin.h(112): fatal error C1189: #error : MFC requires use of Winsock2.h
    Can anyone give me some ideas about resolving this? I am using visual studio 2010.

    Hi 07_SMAH,
    Thanks for posting in MSDN forum.
    But I suggest you ask this issue to Openkinect since people in here don't talk third party libraries or tools. Do you get any problem when you using vs 2010 compile and run your MFC project? If no, your post may off-top here.
    Best regards,
    Shu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Plan Enrollment Coverage End date

    There is a plan , which has following Enrollment coverage Start date and Coverage end date code resp. ( in Plan enrollment requirements)
    Enterable and 1 Day Before Event.
    The plan needs to be explicitly enrolled to thru ESS.
    There is a reqmt such that when employee enters end date it should be such that only sysdate or later date should be allowed to be entered. So we may need to change the above setup.This has to be acheived in configuration only.
    Kindly help.
    Thanks,
    Sush
    Edited by: user10714306 on Aug 14, 2009 6:02 AM

    Hi,
    To drop the plan off employees, you have to process life event for them. If it's part of the annual process, then the enrollments will drop when the open enrollment is processed. Alternately, you will have to process an "Admin" life event for these employees.
    If you are using unrestricted processing, then use admin or open to achieve the same.
    IF the changes are just in dev environment, I suggest removing the plan year periods from the plan instead of making it inactive. processing life events is still necessary. Plans made inactive cannot be reverted back and so, should be done as a last resort.
    Regards,
    Vinayaka

  • Open Enrollment error for US - No correct adjustment reason specified

    Hi,
    We are getting this error "Open Enrollment error for US - No correct adjustment reason specified". Please help if you know the resolution to this.
    Regards,
    Anand Jalan

    I have found the solution for this.
    Maintain the Open enrollment period dates in IMG->Personnel administartion -> Benefits ->Flexible administration->Define Administrative Parameters

  • Automatic plan figures updates at Profit Centre level.

    Hi,
    I would like to know whether do we have any scenario like Automatic Plan figures updates at Profit Centre Accounting level when we do Cost Centre planning.  The Profit Centre should be picked up by the system automatically from the Cost Centre master. 
    Of course, here the Cost Centre to Profit Centre relationship is 1:1. 
    If anybody come across the above required scenario, please let me know how to achieve it.
    Thanks for your inputs well in advance.
    Note: I know we can copy the Cost Centre plan figures to Profit Centre level by using copy function.
    Regards.
    Chandra

    Hi
    In version maintenance, you need to tick integrated planning....
    In PCA, create the doc types for planning and maintain no ranges...
    Also, if you are on New GL and you want to use New GL planning, you need to do settings in new GL menu for the same... assign version to ledger, fiscal year , etc
    last month there were couple of threads on it .. Refer this link for new GL planning settings
    Re: Buget Upload, Planned values-KP06
    Regards
    Ajay M

  • Creating maintenance plan "MaintenancePlan" (Error)

    Hello, I get the error
    Creating maintenance plan "MaintenancePlan" (Error)
    when I try to create a maintenance plan. I checked and the Microsoft Web site and
    other forums said it may be that integration services is not installed so I tried installing it
    and it said that it is already installed.
    The accompanying messages with the report are:
    ADDITIONAL INFORMATION:
    The connection type "ADO.NETQL" specified for connection manager "{C72T6E0B-6CE7-4138-A8D9-BFE8897900700}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
    (MaintenancePlan)
    The connection type "ADO.NETQL" specified for connection manager "{C72CT60B-6CE7-4138-A8D9-BFE8897900700}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
    (MaintenancePlan)
    - Adding tasks to the maintenance plan (Stopped)
    - Adding scheduling options (Stopped)
    - Adding reporting options (Stopped)
    - Saving maintenance plan "MaintenancePlan" (Stopped)

    Sharp,
    Do you still need help with this?
    Thank you!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Planning Provider Error in Smartview 9.3.1.5.0.025

    Hello all,
    When I retrieved large amounts of data in Planning Ad-hoc using SmartView and Workspace, I got "Planning Provider Error".
    EPM 9.3.1.5.0.025
    Win XP prof 2002 Serv Pack 3
    Please advise, thanks!
    Smartview error:
    http://i.imgur.com/bVCLz.jpg?2989
    Workspace error:
    http://i.imgur.com/n5Cbr.jpg

    This type of error usually means the the xml being returned by your provider is not the expected type or is malformed. What provider are you hitting and can you tell me the url you are using? Also it the provider and older or newer version than the Smart View client?

Maybe you are looking for