Automatic reboot of my MBP
Hello, I have the following problem when I want to do the following:
I have to log measurements with a logger from pico (www.picotech.co.uk). This is a windows-software. Therefor I'm using parallels desktop 5. The measurement should take about three weeks. In this time the MBP way not turn off or go into sleep, because the pico-software must take every 5 seconds a sample of the voltage and write it to disk.
What's the problem:
After a certain time (always a little less than three hours) without keyboard or keypad access, the MBP reboots. When I touch the touchpad every two hours, the MBP does not reboot. So I can get through the day (when I'm in my testlab), but during the night the MMBP reboots.
What have I done to avoid this (without success):
- standard in Parallel's the windows energy settings are to never shut-down or hibernate
- in the Mac osX Lion software, I set the energy settings to never sleep.
- I downloaded and activated the program "Caffeine" to simulate activity to prevent MBP going asleep.
But nothing helps (till now).
I hope you guys can help me out...
Here I post the part of the system log when the reboot takes place. Can somebody confirm (or deny) that Parallels Desktop 5 could be the cause?
30/08/11 00:34:10,744 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:34:10,744 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:34:10,744 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:39:10,710 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:39:10,710 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:39:10,710 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:44:10,677 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:44:10,677 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:44:10,677 HPEventHandler NSLHexDecodeText is deprecated and will be removed soon. Please use CFURLCreateStringByReplacingPercentEscapes instead.
30/08/11 00:47:00,897 KernelEventAgent tid 00000000 received event(s) VQ_DEAD (32)
30/08/11 00:47:02,000 kernel /drv/ HypVMManager.c:302 Monitor quited successfully
30/08/11 00:47:05,000 kernel 0 0 AppleUSBCDC: start - initDevice failed
30/08/11 00:47:08,230 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,230 prl_client_app kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:47:08,230 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x3e
30/08/11 00:47:08,230 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,230 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x3e
30/08/11 00:47:08,231 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,231 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,231 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,231 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,231 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x3e
30/08/11 00:47:08,231 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,232 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,263 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,263 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x7d
30/08/11 00:47:08,264 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,264 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x7d
30/08/11 00:47:08,264 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,264 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,264 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,264 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,264 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x7d
30/08/11 00:47:08,264 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x3e
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x3e
30/08/11 00:47:08,265 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,265 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,265 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x3e
30/08/11 00:47:08,266 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,266 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,266 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,266 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,266 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x3e
30/08/11 00:47:08,266 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,266 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x3e
30/08/11 00:47:08,267 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,267 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,267 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,267 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 62
30/08/11 00:47:08,267 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x3e
30/08/11 00:47:08,267 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,267 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,268 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x74
30/08/11 00:47:08,268 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,268 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x74
30/08/11 00:47:08,268 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,268 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,268 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,268 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,268 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x74
30/08/11 00:47:08,268 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,268 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x7d
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,269 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x7d
30/08/11 00:47:08,269 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,269 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,269 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x7d
30/08/11 00:47:08,269 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,270 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,270 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x74
30/08/11 00:47:08,270 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,271 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,271 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x74
30/08/11 00:47:08,271 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,271 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,271 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,271 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,271 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x74
30/08/11 00:47:08,272 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,272 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,272 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x86
30/08/11 00:47:08,272 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,272 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x86
30/08/11 00:47:08,272 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,273 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,273 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,273 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,273 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x86
30/08/11 00:47:08,273 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,273 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,273 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,273 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,273 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x86
30/08/11 00:47:08,274 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,274 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x86
30/08/11 00:47:08,274 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,274 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,274 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,274 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,274 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x86
30/08/11 00:47:08,274 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,275 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,275 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,275 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x74
30/08/11 00:47:08,275 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,275 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x74
30/08/11 00:47:08,275 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,275 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,275 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 116
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x74
30/08/11 00:47:08,276 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,276 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x7d
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x7d
30/08/11 00:47:08,276 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,276 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,277 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 125
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x7d
30/08/11 00:47:08,277 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,277 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: CGSGetWindowTags: Invalid window 0x86
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: CGSGetWindowFlushSeed: Invalid window 0x86
30/08/11 00:47:08,277 prl_client_app -[NSPersistentUIManager getCurrentFlushSeedForWindow:]: CGSGetWindowFlushSeed(cid, (CGSWindowID)windowNumber, &result) returned CGError 1001 on line 2348
30/08/11 00:47:08,277 prl_client_app kCGErrorIllegalArgument: CGSGetSurfaceCount
30/08/11 00:47:08,278 prl_client_app -[NSPersistentUIManager snapshotWindow:handler:]: CGSGetSurfaceCount(cid, wid, &surfaceCount) returned error 1001 on line 2295
30/08/11 00:47:08,278 prl_client_app kCGErrorIllegalArgument: _CGSFindSharedWindow: WID 134
30/08/11 00:47:08,278 prl_client_app kCGErrorIllegalArgument: CGSLockWindowBackingStore: Invalid window 0x86
30/08/11 00:47:08,278 prl_client_app __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,279 [0x0-0x44044].com.parallels.desktop.console Aug 30 00:47:08 PVS-MBP-2008.local prl_client_app[561] <Error>: __CGPixelAccessLockWindowAccess: access lock failed: error 1001.
30/08/11 00:47:08,356 com.apple.launchd.peruser.501 ([0x0-0x6c06c].com.apple.Console[726]) Exited: Killed: 9
30/08/11 00:47:08,390 mds (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
30/08/11 00:47:08,413 com.apple.launchd.peruser.501 ([0x0-0x62062].com.apple.AppleSpell[683]) Exited: Killed: 9
30/08/11 00:47:08,416 com.apple.launchd.peruser.501 (com.apple.quicklook[1267]) Exited: Killed: 9
30/08/11 00:47:08,583 com.apple.launchd.peruser.501 (com.apple.mdworker.pool.0[758]) Exited: Terminated: 15
30/08/11 00:47:08,743 loginwindow DEAD_PROCESS: 441 console
30/08/11 00:47:09,728 loginwindow CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
30/08/11 00:47:09,728 com.apple.loginwindow No session list!
30/08/11 00:47:09,728 loginwindow CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
30/08/11 00:47:09,770 UserEventAgent CaptiveNetworkSupport:UserAgentDied:139 User Agent @port=26635 Died
30/08/11 00:47:09,854 prl_naptd Exiting Parallels Network Daemon
30/08/11 00:47:11,258 loginwindow Login Window Application Started
30/08/11 00:47:14,097 loginwindow **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/08/11 00:47:15,902 com.apple.SecurityServer Session 100011 created
30/08/11 00:47:15,903 loginwindow Login Window Started Security Agent
30/08/11 00:47:16,210 com.apple.launchctl.LoginWindow com.apple.findmymacmessenger: Already loaded
30/08/11 00:47:16,708 WindowServer kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:47:16,708 loginwindow kCGErrorFailure: CGSPackagesGetWorkspaceType: couldn't get workspace type
30/08/11 00:47:16,708 loginwindow kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:47:17,481 UserEventAgent ACRR: Failed to save usage store to /Library/Application Support/CrashReporter/Intervals_36731CBE-B2C2-54E8-B132-48355AC06C89.plist
30/08/11 00:47:17,731 SecurityAgent Echo enabled
30/08/11 00:47:17,731 SecurityAgent Echo enabled
30/08/11 00:47:29,851 prl_vm_app This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
30/08/11 00:47:30,431 SecurityAgent kCGErrorFailure: CGSPackagesGetWorkspaceType: couldn't get workspace type
30/08/11 00:47:30,431 SecurityAgent kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/08/11 00:55:32,973 UserEventAgent ACRR: Failed to save usage store to /Library/Application Support/CrashReporter/Intervals_36731CBE-B2C2-54E8-B132-48355AC06C89.plist
30/08/11 00:55:35,000 kernel hibernate image path: /var/vm/sleepimage
30/08/11 00:55:35,000 kernel sizeof(IOHibernateImageHeader) == 512
30/08/11 00:55:35,000 kernel Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 400000 ssd 0
30/08/11 00:55:35,000 kernel hibernate image major 14, minor 0, blocksize 512, pollers 5
30/08/11 00:55:35,000 kernel hibernate_alloc_pages flags 00000000, gobbling 0 pages
30/08/11 00:55:35,000 kernel hibernate_setup(0) took 0 ms
30/08/11 00:55:35,000 kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=4 stateNumber=2
30/08/11 00:55:35,000 kernel /drv/ MacModule.cpp:266 powerStateWillChangeTo: found flag=kIOPMSleepCapability (4)
30/08/11 00:55:35,000 kernel 00000000 00000020 NVEthernet::setLinkStatus - not Active
30/08/11 00:55:35,000 kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=4 stateNumber=2
30/08/11 00:55:35,000 kernel /drv/ MacModule.cpp:266 powerStateDidChangeTo: found flag=kIOPMSleepCapability (4)
30/08/11 00:55:40,000 kernel hibernate_page_list_setall start 0xffffff8065754000, 0xffffff8065773000
30/08/11 00:55:40,000 kernel hibernate_page_list_setall time: 266 ms
30/08/11 00:55:40,000 kernel pages 750299, wire 148505, act 47095, inact 127, spec 14, zf 1152, throt 0, could discard act 206280 inact 138290 purgeable 9074 spec 199762
30/08/11 00:55:40,000 kernel hibernate_page_list_setall found pageCount 196893
30/08/11 00:55:40,000 kernel IOHibernatePollerOpen, ml_get_interrupts_enabled 0
30/08/11 00:55:40,000 kernel IOHibernatePollerOpen(0)
30/08/11 00:55:40,000 kernel writing 195648 pages
30/08/11 00:55:40,000 kernel encryptStart 2e2d0
30/08/11 00:55:40,000 kernel encryptEnd 9242ae0
30/08/11 00:55:40,000 kernel image1Size 240834560, encryptStart1 2e2d0, End1 9242ae0
30/08/11 00:55:40,000 kernel encryptStart e5ad800
30/08/11 00:55:40,000 kernel encryptEnd 12e6eb40
30/08/11 00:55:40,000 kernel PMStats: Hibernate write took 3770 ms
30/08/11 00:55:40,000 kernel all time: 3770 ms, comp bytes: 801665024 time: 977 ms 782 Mb/s, crypt bytes: 229464912 time: 1404 ms 155 Mb/s,
30/08/11 00:55:40,000 kernel image 317123584, uncompressed 801665024 (195719), compressed 315122720 (39%), sum1 2aecdeef, sum2 45c654e9
30/08/11 00:55:40,000 kernel wired_pages_encrypted 94415, wired_pages_clear 52916, dirty_pages_encrypted 48388
30/08/11 00:55:40,000 kernel hibernate_write_image done(0)
30/08/11 00:55:40,000 kernel sleep
I have found the cause of the automatic rebooting of my MacBook Pro. In fact it was not an automatic rebooting, but an automatic logging-out of the system.
In the security and privacy settings (beveiliging en privacy in Dutch), there is an option to automatic logout after a certain time of inactivity (log uit na een periode van xxx minuten).
This was selected and was put on 160mins. I don't know how this was set this way: did I do it one time myself or was it by default this way.
Because I get the same login-screen after display sleep, PC-sleep, and logging-out, I couldn't see a difference.
Similar Messages
-
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store. -
iphone 5 ios 7.0.3 automatic reboot show apple logo when i enter wrong password 2 time .
please have me any idea ?
thanksrecovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
Init 0 or shutdown -i0 on solaris 8 automatically reboots
I have a solaris 8 server and when I issue init 0 or shutdown -i0 it automatically reboots. I was able to issue init 5 and it shutdown/power down, but not init 0.
I looked at inittab and it shows
s0:0:wait:/sbin/rc0 >/dev/msglog 2<>/dev/msglog </dev/console
Any suggestions?
thanksHi
Thank you. I have 2 SunFire v440s. Both have auto-boot?true and I only have this problem with one of them. I was able to issue init 5 and the server shut down, but both init 0 or shutdown -i0 rebooted.
Unfortunately the server with the problem is remote so I can't do allot of testing with it.
Thank you for your suggestions. -
My macbook after mountain lion upgrade keeps on automatically rebooting. Any ideas?
After updating my macbook 2009 with Mountain Lion. It automatically reboots my computer. Any ideas as to what the problem is?
This is information my macbook is displaying:
Interval Since Last Panic Report: 104068 sec
Panics Since Last Report: 4
Anonymous UUID: B2C104D0-AECA-4FB2-A245-9B132D41281A
Sun Sep 2 10:37:46 2012
panic(cpu 0 caller 0xffffff80126b7b95): Kernel trap at 0xffffff8012eea380, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8012eea380, CR3: 0x000000002fc2e000, CR4: 0x0000000000000660
RAX: 0xffffff801e530df0, RBX: 0x0000000000000002, RCX: 0xffffff80126a59c0, RDX: 0x000000000000000c
RSP: 0xffffff808b1b3ed8, RBP: 0xffffff808b1b3f00, RSI: 0x00000000b10c0e2c, RDI: 0xffffff801e53d550
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000617, R11: 0x0000000000000246
R12: 0xffffff8012634330, R13: 0x0000000000000026, R14: 0xffffff801e530df0, R15: 0x0000000000000026
RFL: 0x0000000000010282, RIP: 0xffffff8012eea380, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8012eea380, Error code: 0x0000000000000010, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808b1b3b70 : 0xffffff801261d5f6
0xffffff808b1b3be0 : 0xffffff80126b7b95
0xffffff808b1b3db0 : 0xffffff80126ce4ad
0xffffff808b1b3dd0 : 0xffffff8012eea380
0xffffff808b1b3f00 : 0xffffff80126a5938
0xffffff808b1b3fb0 : 0xffffff80126ceabe
BSD process name corresponding to current thread: PluginProcess
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide: 0x0000000012400000
Kernel text base: 0xffffff8012600000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 2614952149947
last loaded kext at 38447122584: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f93ffa000, size 32768)
last unloaded kext at 246527008769: com.apple.driver.AppleUSBTCKeyEventDriver 235.4 (addr 0xffffff7f942b8000, size 8192)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUsezClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.1
com.apple.driver.AppleUSBHub 5.1.6
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AirPort.Brcm4331 601.15.21
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.kext.triggers 1.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOH
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 4 GB, SMC 1.32f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x8319, 0x4D4943563738504941202020202020202020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x8319, 0x4D4943563738504941202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.21)
Bluetooth: Version 4.0.9f8 10405, 2 service, 11 devices, 1 incoming serial ports
Network Service: Parallels Shared Networking Adapter, Ethernet, en2
Network Service: Parallels Host-Only Networking Adapter, Ethernet, en3
Serial ATA Device: Hitachi HTS543216L9SA02, 160.04 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 2
MacBook, OS X Mountain Lion (10.8.1) -
Node-2 automatically reboots while installing DB Softw're after cluster Ins
I'm trying to configure RAC on my Laptop on OEL-5 with 11g,
When i'm trying to install Database software after 75% of installation my second node automatically reboots.
Help
Thanks
BalaRefer
Time difference between the RAC nodes is out of sync
http://www.oracleracexpert.com/2009/12/time-difference-between-rac-nodes-is.html
Hope this helps,
Regards,
http://www.oracleracexpert.com
Remove Grid control agents or targets from repository
http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
Modify VIP Hostname in Oracle Cluster
http://www.oracleracexpert.com/2010/06/modifying-vip-address-or-vip-hostname.html
Edited by: Satishbabu Gunukula on Jul 7, 2010 11:15 AM -
Can I set up a way to automatic reboot after a kernal panic?
Hey,
I'm working with Mac OS X Server (10.4.9) that is on a 4x2.5 GHz PowerPC G5. I been looking for a way to set up my server to automatically reboot after a kernel panic. Can any one show me the way?
Thanks
MikeWe use to use a 'spare' server for testing but could be pushed into production. For when IBM needed to come in and replace a faulty card.
Get on-site contract, and order an Xserve and use the old G5 Quad workhorse as spare... but you said this is not your usual company, so maybe that don't see things like an IT might.
Swap out RAM for one. Install ECC which Quad can use. And those FAQ lists make a good spreadsheet of what happens.
You might just start with Apple Hardware Test and a memory test.
Warmer weather, I assume it is in climate controlled room?
Have you read up on http://www.xlr8yourmac.com reports on Quad owners and liquid cooling? I know some that went through three motherboards (on-site swap) and a few that walked away with Mac Pro because it was determined the patient reached the point of not being able to be revived. -
T5120 Jumpstart: unable to update system firmware for automatic reboot
Hi,
i'm trying to install a T5120 using the jumpstart framework. During the installation the new boot device should be set but instead i get the information that is was not possible to do so.
Installing boot information
- Installing boot blocks (c0t0d0s0)
- Updating system firmware for automatic rebooting
WARNING: Could not update system for automatic rebooting
WARNING: CHANGE DEFAULT BOOT DEVICE
If you want the system to always reboot Solaris from
the boot device that you've specificed (c0t0d0s0),
you must change the system's default boot device using
the eeprom(1M) command after installing Solaris software.the diag-switch is set to 'false'.
{0} ok printenv
Variable Name Value Default Value
ttya-rts-dtr-off false false
ttya-ignore-cd true true
keyboard-layout
reboot-command
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity min min
pci-mem64? true true
diag-switch? false false
local-mac-address? true true
fcode-debug? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device virtual-console virtual-console
input-device virtual-console virtual-console
auto-boot-on-error? false false
load-base 16384 16384
auto-boot? true true
network-boot-arguments
boot-command boot boot
boot-file
boot-device disk disk net
multipath-boot? false false
boot-device-index 0 0
use-nvramrc? false false
nvramrc
error-reset-recovery boot bootDoes anybody have any ideas what the problem could be?
I browsed several boards and a huge set of websites but did find anything related.At the first time yes, because i'm using an extra raid controller. That's because the environment 'boot-device' has to be set to a value different than 'disk'.
At the end of the jumpstart installation i have to type 'init 6' for reboot manually and the environment 'boot-device' has its default value. Thats why the server isn't boot and fall back to net boot. -
Why does my iPod Nano (7g) automatically reboot while I'm using Nike fitness?
Yesterday I was running with my iPod 7g, I was using Nike finess and it automatically rebooted. Today same problem... Why?
It's possible I accidentally push Power off, but it's been two days! :/
Please Help meIs it one app, or every app? If one or two apps, try deleting them from iPad and then reinstalling them. Have you tried a complete restore to factory settings? Might be time consuming but you should try all options. If all else fails, head to the Apple store and let them see it.
Good luck. -
Automatic Reboot if no activity for 30-40 min.
Hello,
i have a problem with my PB. Ever since I have upgraded to 10.4 my computer automatically reboots if there is no activity (means if i don't type or surf on the web). Even iTunes continuously playing music is not stopping the computer to reboot.
I have already reset the PRAM/PMU, but it has not changed anything. Also checking permissions etc did not help. The only program holding the Mac back from reboot is the VLC player if I put it in repeat mode.
Does anyone has a suggestion what I can do? Should I reinstall 10.4 and then apply all patches until it is back on 10.4.4? Or ist there anything else I could do? If I need to reinstall the OS 10.4 what files should I back up to keep my iTunes, iPhoto, mails, etc. Just my "home" folder?
Thank you.
Regards,
Marco
Apple Powerbook 17" 1,67 Ghz Mac OS X (10.4.4)How did you reset the PMU? Are you aware that there is a internal battery?
Remove all power from the unit ( battery and DC power ) for 10 mins ( http://docs.info.apple.com/article.html?artnum=30017 ) and see if the issue continues. Also check what cron scripts are running, maybe running cocktail available on version tracker may resolves the issue. Good Luck -
Hi,
I have an Linksys RV042 Router (firmware 1.3.12.19-tm). The problem is, that our ISP has an forced disconnect every 24hours. Now it´s the question if it´s possible to scedule an automatic reboot in the RV042 setup? I don´t think so but maybe someone has a solution for me?
Thanks!
I 1.3.12.19-tm
1.3.12.19-tmHi,
No, it's not possible to schedule a power cycle with in the Web GUI of this unit. I have heard of customers going to lowes or home depot and getting a Timer that goes on the outlet and will cut off power and turn power back on. Which will cause a reboot. just a suggestion since you need a power cycle every 24 hours.
Thanks,
Jasbryan
Cisco Support Engineer
.:|:.:|:. -
Any way to disable the automatic reboot when a TS fails?
When a Task Sequence fails it displays an error and then reboots after 15 minutes. Is there any way to turn this off? We usually setup a bunch of machines to image and then go work on other things. Then we go back to check the machines
later. If something crashed, it will just be sitting at a logon screen with no indication that anything is wrong.
Can we turn off the automatic reboot somehow or extend the time to an hour or two or anything like that? Seems silly to force them to reboot without an option to turn that off but I can't find a setting anywhere.
Thanks.There is a built-in variable you can use to define (extend) the time: SMSTSErrorDialogTimeout
Tim | Blog |
@Tim_DK
Can I set this globally in the system somewhere or do I have to do it inside the task sequence? -
My Z2 automatic reboot several times a day
Hello,
When I upgrade my Z2 to the latest revision of OS, it become so easy to automatic reboot. It comes when I talk with customer. that create a lot of trouble for me. And it will have maybe 10 times per day.
My software revision is 17.1.2.A.0.314. Do you know what happen? If I go back to latest revision, will it become ok?
Best Regards,
Steve LouDoes the same occur if you remove the SIM?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
How to solve the issue that VMs are automatically reboot too often in RAC ?
Folks,
Hello. I have been installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
The problem is that the 2 VMs are automatically reboot too often if I don't touch keyboard for a while. All programs running in the VM are gone and need to be restarted.
My question is:
How to have the VMs be stable and not to reboot if I don't touch keyboard for a while ?Folks,
Hello. I have been installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
The problem is that the 2 VMs are automatically reboot too often if I don't touch keyboard for a while. All programs running in the VM are gone and need to be restarted.
My question is:
How to have the VMs be stable and not to reboot if I don't touch keyboard for a while ? -
iPhone 4 will automatically reboot? Anyone have the same problem with me?
Hello there, B.Jian.
The following Knowledge Base article has some great information for troubleshooting the issue you may have with your phone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Specifically:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.
Maybe you are looking for
-
Trying to figure out how to save Adobe TV episode as I am new to Photoshop and need insruction... trying to open & save to My Library to view later. It instructs me to sign in but I am already signed in. Anyone know how?
-
I want open a small hotspot I have three iMac and two iPad 2 but I would like to control everything from one iPad like time and what they are watching o copies too. What can I do? Please help me guys
-
I'm having a hard time displaying a link to a dashboard next to the "My Dashboards" link in the header. A link displays for the Administrator account, I just want it to also display for normal users. The dashboard is saved under a shared folder. Shou
-
Can't install MacBook Air Flash Storage Firmware Update 1.1
My macbook air is mid 2012 And I just update the mac on Oct 15 And today I heard about the ssd failure thing. I head to appstore and find 0 updates there. Then I download the MacBook Air Flash Storage Firmware Update 1.1 here http://support.apple.com
-
Adhoc query on lang proficiency
1. What are the ways/steps/effort required to enable a standard infoset. 2. What are the ways/steps/effort required to customized a PD infoset