Automatic status "Completed" on tasks where phase has been completed

Hi experts,
I am wondering if there is any way (apart from developing a custom workflow) of setting all tasks below a phase as completed when the phase is completed.
Thanks in advance.
Kind regards,
Neil

Hi Neil,
Implement the BAdI DPR_EVENTS and use Phase Completed as filter value.
In this implementation, get all the tasks that belong to that phase and set the status of these tasks to completed.
Commit the changes.
Regards,
Reema.

Similar Messages

I have downloaded update of ios 8 and i want to know where it has been saved in itunes

i have downloaded update of ios 8 and i want to know where it has been saved in iTunes?

To find it's location using iTunes on the Mac:
iTunes/Preferences/Devices/
Next, highlight a backup that matches your device, secondary-click on it and select "Show in Finder"

Script task error: exception has been thrown by the target of an invocation

Hi,
I have a script task which find the sheet name in an excel and assigned it to variable, this package works perfect while executing using BIDS but when I try to execute it using project deployment it throws the error.
Script task error: exception has been thrown by the target of an invocation

Hi Shoaib,
You use the Microsoft.Office.Interop.Excel namespace in the Script Task, right? If so, please check whether you can find the Microsoft.Office.Interop.Excel.dll in the following folder on the SSIS server:
%ProgramFiles%\Microsoft Visual Studio XX.X\Visual Studio Tools for Office\PIA\OfficeXX
(or %ProgramFiles(x86)%\Microsoft Visual Studio XX.X\Visual Studio Tools for Office\PIA\OfficeXX on 64-bit operating systems)
To install Office primary interop assemblies (PIAs), you can use one of the following methods:
Install the .NET Programmability Support feature when installing Microsoft Office.
Install the
Microsoft Office 2010: Primary Interop Assemblies Redistributable.
Regards,
Mike Yin
TechNet Community Support

The invitation status shows 'pending' but no email has been received by the team member.

I have invited a team member to our creative cloud. The invitation status shows 'pending' but no email has been received by the team member. I've canceled the invite and tried a few times. Is there another route?

Please check with another Email ID that if the Email invite is being send.
Check the domain of the person whom you are inviting, it might have some securities attached.
Let us know the status.
Regards
Rajshree

Cancel Inspection Lot where UD has been done

Hi Experts,
If a user has Posted Inspection stock wrongly and also made the usage decission for a Inspection Lot.Then user relealised and want to correct the stock postings.In this case I'm going to cancel the inspection lot but sys is giving me the error "ststus check error , Usage decision has been made".
Kindly give me solution to how to correct the Inspection Lot.
Regards,
Sri.....

HI All,
I Maintained my own inspection type in the material masters which is the copy of 01 Inspection type.
1)As you suggested to maintain the inspection type 08 - Stock transfer inspection in the material master then do the transfer posting for 322 movement type, Do i need to change the material masters every time for this inspection or do i need to maintain 08 defaulty for all the material masters.
2) In case if GRN is 10 qty
Accepted qty is 5
Returned qty is 5.
Now in the above case user has entered wrong qty in both Accepted and returned and did the UD.So how reverse or cancel the lot to process the lot again with correct qty.
Regards,
Sri..

How to edit/modify workflow task after it has been completed?

My workflow spawns a couple tasks and once those tasks are completed, they become non-modifiable. If the user made a mistake by entering wrong details while completing the task and would like to change it later, he cannot do so once he hits the complete
button. This is happening in SharePoint 2010.
We were using SharePoint 2007 earlier when this wasn't the case. The tasks could be modified even after they were completed. I would like to have the same behavior in 2010 too. Please suggest how can I do it? There should be some task settings to enable
modification but I just can't find them.

Hi,
Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Hi there, i was wondering if there is a feature in Thunderbird that will allow automatic printing of an email after it has been sent? Thank you

Hi guys,
I was hoping there might be a feature or add-on that will allow me to automatically print an email after I send it. For the purpose of creating a paper trail we have to print out at least the 1st page of all emails sent to our clients. Love using Thunderbird and would like to keep using it. I know there is a feature in Outlook. Hope you guys have one too :)

There is an add-on, [https://addons.mozilla.org/en-US/thunderbird/addon/send-filter/ Send Filter], that allows filters to act on the Sent folder, and there is an add-on, [https://addons.mozilla.org/en-US/thunderbird/addon/filtaquilla/ FiltaQuilla], that adds Print to the filter Actions. I can't confirm whether or not you can get them to work together to achieve your aim.

Workflow status "In progress" remains after everything has been executed

Hello,
I'm running into a problem with visual studio workflows I'm using in my solution. It appears that some workflows randomly don't finish while the same workflow finishes just fine for an other listitem. So I got a small test envoirment which creates 30 listitems
and starts the same workflow (with 1 task inside) for all those items. After that I got some custom code which alters every task to be finished. So when the problem appears the task inside the workflow is finished, but the workflow itself remains "In
progress".
Only 3 - 5 out of 30 workflows usually remain "In progress" and sometimes every workflow is finished, so I'm wondering what the cause could be here? Sometimes a single workflow also remains "In progress" so the heavy load due to many
workflows being finished at the same time can't be the reason in my opinion.

I got a follow up question, which might lead to a solution for my problem. I'm trying to figure out how to terminate a workflow programmatically. I've found severals ways to cancel a workflow but since that's not the result a user might expect, after everything
went fine, I'm looking for a piece of code to end the workflow as it would normally do.
I understand why there is no api for this code, since a workflow normally should stop by itself, but as I pointed out in my first post that's not always the case for me.

Proxyaddresses in a domain where Exchange has been removed

Scenario - two companies merge, both have on-premises Exchange orgs. Mailboxes are moved to CompanyA's domain, and Exchange is completely removed from CompanyB's domain. Now, several years later, CompanyA is configuring dirsync (AADSync, actually) to sync
both domains to Office 365, and I just noticed that the accounts in CompanyB still have remnants of Exchange attributes, such as the proxyAddresses. Some of these addresses may conflict with the mail-enabled objects in CompanyA, so my question is - should
we make an effort to clear all the proxyAddresses from the accounts in CompanyB prior to the dirsync? If so, what other attributes do I need to be concerned with? Also, do proxyAddresses have any use other than Exchange? I don't want to clear them if it might
cause problems elsewhere.

You're asking what attributes need to be "cleaned up" after a cross-forest migration? There is no single answer here, as it depends on how the migration was done, but generally speaking the proxyAddresses attribute does a lot of the legwork.
You should have an accepted domain defined for each of your mailboxes' proxyAddresses.
I've not seen proxyAddresses used outside of Exchange.
This is an approach that might get you started
http://theessentialexchange.com/blogs/michael/archive/2009/07/07/removing-old-emailaddresses-proxyaddresses-in-exchange-2007.aspx
Mike Crowley | MVP
My Blog --
Planet Technologies

App does not show up on display where it has been started

Hi
I have a macbook pro latest model with up-to-date osx, and i have an external monitor connected to it through a thunderbold->dvi connection.
When open an app on the exernal display either from the dock or using the finder, the programm is always showing up on the main display on the macbook pro, and i have to move everything back to the exernal display.
Is that normal like that, or is there a way to change this, so that program show up on the display where they are started ?
Thanks for any help
Daniel

You could try contacting the store support staff at http://www.apple.com/emea/support/itunes/contact.html they are very good at resolving problems.

When I closde a page where there has been a video, ie youtube or the like, the sound from that video that had played will continuw to run. I can close Firefox and upload it again and still will the sound of the video continuew to run. WHY?

When I close a youtube video or some other video and even after closing the tab the sound from the video continue to be played. As a matter of fact I have even closed Firefox and re-started Firefox and it plays again. I even went and turned off the computer and re-started the computer and then Firexox and the video sound was still there playing. WHY is this happening???.

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

My ipad automatically tried to update skype to version 4.1.1 It has been showing installing for 3 days and says waiting on the icon. It will not allow me to delete the app. When someone calls me on skype it rings but turns off as soon as I try to answer.

My ipad automatically tried to update skype. It has been installing for 3 days and the message waiting is on the icon. I am unable to delete skype to try and re install. I have gone to the licence page but there is nowhere that I can agree the terms as it is still trying to load.

delete the app on itunes (on PC) then download it again.

How to re-order automatically the number of primary key column in MySql that has been set as auto_increment if one of the row deleted?

Hello,
Can anyone show me the way how to re-oder automatically the number of primary key that has been set as auto_increment in mysql database when the row deleted?
example:
No (primary key=auto increment)|
Name |
AGE |
1
  | JO
| 21
|
2
  | Kyle
| 25
|
3
  | Macy
| 30
|
When delete 1 row:
No (primary key=auto increment)|
Name |
AGE |
1
  | JO
| 21
|
2
  | Macy
| 30
|

Hello,
This is not a VB.NET question, best to ask this question in
MySQL forum.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Your order has been sent for processing...

...and the button to cancel my pre-order has now went away. Hopefully this is a good sign that my 6 Plus is moving through the process and I'll still get it on launch day. Fingers crossed!

I ordered the Plus, 64GB, in Silver. And I was getting the same "expected delivery date not available" until about a little over and hour ago. Check it once more and noticed that the status had changed to "your order has been sent for processing". I was a bit shocked to see the change too since everyone else was having the "not available message". I'll keep checking and will post if the status changes again.

Price has been changed in sales order after invoice created

Hi,
We have a scenario where there has been a change in sales order prices after invoice created. when user try to pull out a report for incomplete sales orders through V.02 and these orders populating in (incompletion log is showing for Customer Expected price).
when I looked into the changes for those sales orders, there is FI job which did all those changes and it is difficult to find the details of what the job does.
Please suggest me the work around how should I remove these sales orders from incompletion log.
Thanks
Anuja

Hi. Anuja. has accounting document generated.? Because once the accounting document generates there no fields we can change apart from output types. I think in your scenario there are no accounting documents generated. may be , because of that reason The pricing has changed after the invoice. In order to solve this , in billing type uncheck posting block check box......
I Think it might helpful.
regards, ADITHYA

Automatic status "Completed" on tasks where phase has been completed

Similar Messages

Maybe you are looking for