Automatic version update - some problems

Hi,
on SQLD startup (1184) info about new updates has appeared.
After dowloading and installing (check for updates dialog) I was prompted to restart SQLD. After restart I looked in About/extensions (see below), all components seem to be 1.3 and up.
Then I have just for quriosity started "check for updates" once more and it found 3 more updates (while they were already installed), I have installed them, then repeat the cycle - seems that these 3 updates will be shown as new available updates forever.
Database Developer     oracle.onlinedb     11.0.0.37.07     Loaded
Mac OS X Adapter     oracle.ideimpl.apple     11.0.0.37.02     Loaded
Object Viewer     oracle.dbdev.oviewer     10.1.3     Loaded
Oracle IDE     oracle.ide     11.0.0.37.02     Loaded
Oracle IDEX     oracle.idex     11.0.0.37.02     Loaded
Oracle SQL Developer     oracle.sqldeveloper     10.1.3.1215     Loaded
Oracle SQL Developer Reports     oracle.sqldeveloper.report     10.1.3.1215     Loaded
Raptor Help     oracle.raptor.help     10.1.3.02.60     Loaded
SQL Formatter     oracle.dbtools.sqlformatter     10.1.3     Loaded
SQL Worksheet Window     oracle.dbtools.sqlworksheet     10.1.3     Loaded
Snippet Window     oracle.dbdev.snippet     10.1.3     Loaded

Following scenario causes problems:
1) Check for automatic updates for Developer (uncheck extensions)
2) Download all available updates
3) Choose to restart now
4) Nothing happens (can't close, you know)
5) Close with Task manager
6) Launch Developer
7) Get following error message:
"Failed to rollback task:
oracle.ideimpl.webupdate.task.DeinstallExtensionTask@2f0df1"
Underneath the message box there is a small window titled "Installing updates" with progress bar which shows 2 full completed vertical bars.
8) After that - all my connections ar gone (oh, the pain...), and help/about shows that I'm still using version 1.0.0.11.84 / Build-MAIN-11.84
Environment - Windows 2k, some connections to multiple databases were open.
9) I tried automatic update again, using the same scenario (update only SQL Developer) but this time it shows that no updates ar available.
EDIT:
BUT the closing bug seems to be gone, something must have happened.
Message was edited by:
JVA

Similar Messages

  • Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

    Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • Automatic page updates causing problems with your screen reader

    i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • If you are using a screen reader and having problems using Mail, it might help to disable automatic page updates. Please note, this will also disable chat and text messaging within Yahoo! Mail.This problem has resurfaced from previous versions of Firefox.

    I get a terrible display in ATT Yahoo!

    I have this same problem and it occurs with other websites (like ESPN.com) too. Only I don't get the option of disabling automatic page updates on other websites. I disabled and reinstalled Mozilla and it went away for a short while. About two weeks later the same problem popped back up.

  • Some Systems Restarted Automatically after Updates Deployment with Restart Suppressed

    I've searched the forum and multiple blogs - but, I'm still confused about what is causing some of our workstations to restart after applying a software updates deployment.
    I deployed the Dec 2013 Patch Tuesday updates to a collection of workstations. The deployment was set to:
    Not allow restarts outside of a maintenance window (box is unchecked)
    Suppress restarts on workstations (box is checked).
    There is no maintenance window defined for any of our workstations
    On all the workstations, the HKEY_LOCAL_MACHINE\Software\...\WindowsUpdate\  values are:
    WUServer: http address of our SCCM SUP server
    WUStatusServer: http address of our SCCM SUP server
    Also, the key in HKEY_LOCAL_MACHINE\...\WindowsUPDATE\AU is:
    UseWUServer: 1  (which I understand disables the use of the automatic Windows update service)
    Some set of workstations automatically restarted shortly after 3:00 am the next morning. Clearly that's the Windows Update Agent jumping in a restarting the systems. However, I don't understand why it would do that. I really don't understand why it would
    have occurred on only some of the workstations while others are still waiting for users to manually restart 36 hours later.
    All of the workstations are in the same active directory OU - so the same set of GPOs applies to all.
    Note: none of the registry keys were set directly in any GPOs - I assume the values were set by the SCCM client.
    Any assistance would be appreciated.
    Larry

    depending on the OS version, this could be relevant:
    http://blogs.technet.com/b/wsus/archive/2013/06/11/wsus-blog-managing-updates-with-deadlines-in-an-era-of-automatic-maintenance.aspx
    http://blogs.technet.com/b/wsus/archive/2013/10/08/enabling-a-more-predictable-windows-update-experience-for-windows-8-and-windows-server-2012-kb-2885694.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Alarm & Automatic time update problem ?

    I was wondering if anyone is experiencing a similar problem - I've just discovered this and it's too late to call Club Nokia
    I am on Orange in the UK, and we are currently in British Summer Time. I have set my alarm to go off at a particular time and afterwards the time seems to automatically revert back to GMT. Is this a known problem on the Nokia N70 ?
    I have also tried deliberately changing the time on my phone to a couple of hours off, and then switching the automatic time updating system on, and it hasn't changed the time on the phone - this leads me to suspect that Orange doesn't implement this feature (as it doesn't implement the cell info display feature) but if so then this points to the alarm feature being a bug in Nokia's firmware ?
    Anyone experienced this or has any enlightening information ?
    Thanks in advance
    Regards
    Edward
    Regards,
    Edward

    27-Apr-2006
    04:43 AM
    steve_p wrote:
    Hi Edward,
    You are correct about the cell info display. Orange don't use it. Sometimes you will see it if roaming abroad on other networks.
    I've also briefly suffered exactly what you have described about time reverting to GMT from BST. I put it down to a broacast cell being incorrectly configured.
    About a month ago I was working abroad in Republic of Ireland and the clocks had just moved forwards. The hotel I was staying at (in fact I could narrow it down to the room I was in) was in a zone where my phone repeatedly reverted to GMT. However, as soon as I had travelled to my work site, the phone was 100% back on correct BST. Travelled back in the evening and the phone invariably stayed at the correct time but come the next morning it had reverted back to GMT at some point overnight. My phone has only ever exhibited this behaviour for those few days at that one hotel otherwise it's been perfect. I have my phone on auto time update all the time.
    Strange eh? I put it down to a local issue of the cell that happened to cover the hotel. Perhaps your home cell location suffers the same issue? Only thing I can think of.
    S.
    Hmm - it does sound like a network type problem in that case although if so that means the cell where I live has never been configured correctly because I always get this problem - but only when setting the alarm (it never happened on the old Nokia 6230 I have). I reported it to Orange yesterday, and they quote a 24hour response time from their techie guys so I am hoping for some information back today.
    Any ideas why it might be happening with an alarm clock ? When I deliberately misconfigured my phone's time and set auto time update on, it never corrected the time so why correct it when the clock goes off ?
    Thanks for your help and the info
    Regards
    Edward
    Regards,
    Edward

  • Problem updating (some) titles

    Hi,
    I have a movie where I did add a few titles here and there. I need to update some of those titles, but sometimes I got a problem...
    The problem I see is that instead of updating the clip that have the title, when I click the update button the clip is "flushed" and the title gets added to the next clip in the timeline.
    I cannot remember seeing iMovie 5 doing such things...
    Any idea on how to resolved that?
    Thanks

    It's hard to predict sometimes what clips will be added or removed — combined, actually — when adding a title. Remember that if the title you add is longer than the clip where it starts, iMovie will join one or more ADDITIONAL clips to create the title. (A twelve-second title may gather four three-second clips together into one title clip.)
    When updating a title, it may get even more complicated as iMovie undoes the old title clips, then adds the new title. If the new title is longer or shorter than the original title, lots of interesting things could occur.
    The crucial test isn't whether new/old clips are created/removed. Rather, it's whether the title you want is actually created as configured.
    To see how iMovie applies its own title-making rules, try adding a long title to a short clip. Note how it joins it with the clips that follow it. Then undo that to see how iMovie puts it all back together again.
    I cannot remember seeing iMovie 5 doing such things...
    iMovie 6 changed WHERE titles can be added to a clip, which sometimes makes it behave quite differently than iMovie 5. iMovie 6 lets us add a title to the MIDDLE of a clip.
    To do that in iMovie 5 — which added a title only at the start of a clip — we were required to first split the clip, then add the title at the split. iMovie 6 is smarter. If the playhead is in the middle of the clip it splits the clip for us before adding the title. Essentially iMovie 6 automatically adds a split we added manually in the past. When creating the title a new clip (containing no title) is added to the timeline BEFORE the title begins.
    Try making a few titles in the middle of clips to see how it works.
    Karl

  • Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

    hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

    Did you try everything here?
    iOS: Troubleshooting Messages
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

    I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • I downloaded the 09 version without deleting the 0, and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible !

    I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?

    Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)

  • I have a problem to update some apps on my book , giving me error everytime , i have download the lion system

    i have a problem when i update some apps from app store on my macbook pro, giving me error everytime , i've update my system from leopard snow to lion system ..what should i do ? thank you .

    Hi...
    Try deleting the cache associated with the App Store.
    Go to ~/Library/Caches/com.apple.appstore/Cache.db
    Move the Cache.db file from the com.apple.appstore folder to the Trash.
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
    If you still have problems updating your apps, if you have anti virus software installed, disable that.
    Try turning off the Firewall in System Preferences > Security & Privacy
    If you have an app called Little Snitch installed, that can prevent apps from updating.

  • SAFARI 6.1.3 update to Reader 11.0.07 - cannot open pdf files that are presently on my computer. Previous version had no problem. Any ideas?

    SAFARI 6.1.3 update to Reader 11.0.07 … cannot open pdf files that are presently on my computer. Previous version had no problem. Any ideas? (Here is the message: Adobe Reader could not open 'Digital_Holiday_Cookbook.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Thank you Pat!!!
    Craig Ekonomos
    [email address removed]

  • Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

  • HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I am facing the same issue! I bought 5c few days back
    and everything was fine till I updated the software 7.0.4!
    Whenever am connected to wifi am unable to make a call and if someone tries
    Calling me they get the message that my number is not
    Reachable! When I go back to 3G the calls work perfectly!!
    Please help me out since I use wifi more than my network.
    Appreciate any advise on this

Maybe you are looking for