Automatically close open inbound deleveries

Hi all,
I have a question around how to automatically close inbout deliveries that are open.
We GR against the P.O or the outbound delivery. An inbound delivery is created automatically on PGI of outbound delivery so we see the goods in transit in APO.
I don;t want the system to have 000's of open inbound deliveries so does anyone know how I can set so these clear automatically?
Rgds,
Gomie

Hi Gomie,
Rather than closing the created inbound delivery, I would suggest restrict system from creating the inbound delivery out of outbound delivery. Inbound delivery gets created from outbound delivery thru' output type "SPED". Please delete / remove the output condition record (Tcode VV22) for the delivery type or the given least affected criteria and you can get rid of creation of inbound delivery.
If the created inbound deliveries are less in number you can delete them thru' VL32N or you can use LSMW for delete no of deliveries.
Hope this will help.
Regards,
Sudhir

Similar Messages

  • Collapsible Panel Group - automatic close/open?

    Is there a way to set it so the Spry Collapsible Panel Group automatically closes an open panel when you select to open another one?
    Thank you.

    Uhm... I think you should swap the collapsible panel group for a Spry Accordion: http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html

  • When demand is high does os x mavericks automatically close open applications?

    Hi,
          I don't generally like to have lots of applications open but I do notice that even when I close some apps (such as iBooks or Preview) by clicking on the red dot, they are still showing as running in the Activity Monitor - Memory.
    Will the OS automatically close them if I open other applications and the 'Memory Pressure' goes too high or will the MacBook just slow down until I mechanically quit them piecemeal fashion in AM?
    NB: I'm am a recent ex-windows user so am not very familiar with macs.

    To see which programs are running and to quit them, you can click on the Apple symbol in the upper left-hand corner of the screen and click on "Force Quit." Any programs that are open will show up in there.  To close them you can double click on them in the list and you will see the task bar at the top change to that program.  For example, if you see that Safari is open in the list, then, when you double click on it, the task bar will change at the top to show that you are now in the Safari program. To close it all you would have to do is to click on "Safari" and out of the drop-down box, choose "Quit", and it will close the program.
    Or, you can click on the Apple symbol, and "Force Quit." Once the list pops up, select the one that you want to close and then click on "Force Quit" down below the list.  This will bring up a message asking you if you are sure that you want to close it, or something to that effect.

  • HT4623 I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!

    I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn'

    My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have multiple iPhoto libraries and when I selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open apps window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

    I have multiple iPhoto libraries on my Macbook Air 10.7.5 and when I am selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open application window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

    If you're pushing Option at the exact moment you're clicking the Dock icon, it's supposed to do that. Wait until just after clicking it.
    (112342)

  • When I try to open a second page in safari I press the " +" button but it automatically closes out of safari.. Wht should I do?

    When I try to open a second page in safari I press the " +" button but it automatically closes out of safari.. What should I do?- thanks

    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    If that doesn't fix it then try closing Safari via the taskbar and see if it works when you re-open it :
    iOS 7 :double-click the home button to open the taskbar, and then swipe or drag the Safari app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option if the above doesn't fix it is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Every time I close iTunes, it automatically re-opens itself

    I'm trying to install software updates on my computer, but I cannot because they require a restart- which cannot occur, because every time I quit out of iTunes, it automatically re-opens itself. Why is this happening and how do I get iTunes to stop doing this?

    Check Dashboard to see if you have any iTunes-related widgets running. If so, close them and see if that makes a difference. Similarly, look for any third-party apps that may be related to iTunes, such as apps that copy "now playing" information to a web site.
    Another possibility is external speakers, if you have them. Another user here found that a loose speaker connection may cause random launching and playing on iTunes. Try wiggling the speaker plug and see if that causes iTunes to launch. If so, unplugging and reconnecting the speakers may cure the problem. If not, you may have a defective speaker jack or an off-side plug on the speakers.
    Hope this helps.

  • My itunes program will open in windows 7, but as soon as I choose a tune, it automatically closes

    I have installed Windows 7. My itunes program appears as normal when I open it.  When I click on any song or book to play, it automatically closes down.  I have tried reinstalling itunes with no success. I am also running Norton 360.  If this continues, I won't be able to use the sync with my ipod. It does not have a wireless abillity.  Help!!!

    1. First check if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    2. If that fails, refer to following article to remove SC Info.lib file:
    http://support.apple.com/kb/TS2363
    3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

  • I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

    I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

    Thank you for responding.  I decided to upgrade to Acrobat 11 and it is now working fine.
    There was no error message - the documents just closed. J.R. Ledbetter, CPL
    5614 Turfwood Lane
    Houston, TX 77088
    Tel. 832/657-7027
    email [email protected]
          From: Anubha Goel <[email protected]>
    To: J. R. Ledbetter <[email protected]>
    Sent: Thursday, March 5, 2015 8:12 PM
    Subject:  I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
    I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
    created by Anubha Goel in Acrobat Installation & Update Issues - View the full discussionHi jr_ledbetter, Could you please let me know if you get any specific error message when the PDF closes automatically.Does Acrobat opens as itself or not?You might need to refer the KB doc link mentioned below:Doesn't launch after 30 days
    Installed as part of a CS6 suite Let me know if this helps. Regards,Anubha If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7258293#7258293 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7258293#7258293 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I open an apps that i bought recently but automatically close the apps.

    i open an apps that i bought recently but it automatically close and i cant used it. i already purchase it.

    Have you tried closing the app completely ? From the home screen (i.e. not with the non-working app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Another option is to try deleting the app and re-downloading it : http://support.apple.com/kb/HT2519

  • Java Dialog Boxes Don't Stay Open and Automatically Close

    Hi I'm having this weird Java prob. Initially I thought it was a net beans problem but I found out all java apps have this problem on my pc.
    Dialog boxes automatically close after some time. Please help me resolve this issue.
    Windows 7 x64
    Asus P8P67 Pro
    Intel Core i5 2500K
    ATI Radeon HD6970
    Path:
    C:\PROGRAM FILES (X86)\NVIDIA CORPORATION\PHYSX\COMMON;C:\PROGRAM FILES (X86)\ATI STREAM\BIN\X86_64;C:\PROGRAM FILES (X86)\ATI STREAM\BIN\X86;%SYSTEMROOT%\SYSTEM32;%SYSTEMROOT%;%SYSTEMROOT%\SYSTEM32\WBEM;%SYSTEMROOT%\SYSTEM32\WINDOWSPOWERSHELL\V1.0\;D:\DRIVERS\ATI.ACE\CORE-STATIC;C:\PROGRAM FILES\INTEL\DMIX;D:\INSTALLED SOFTWARES\JEDIT;C:\PROGRAM FILES (X86)\MICROSOFT SQL SERVER\100\TOOLS\BINN\;C:\PROGRAM FILES\MICROSOFT SQL SERVER\100\TOOLS\BINN\;C:\PROGRAM FILES\MICROSOFT SQL SERVER\100\DTS\BINN\;E:\More Software Setups\Educational Software\Game Programming\Tortoise Mercurial Client for Ogre Source\;E:\More Software Setups\Educational Software\Game Programming\CMake 2.8\bin;E:\More Software Setups\Educational Software\Game Programming\Tortoise SVN for Ogre AL\bin;D:\Installed Softwares\DirectX SDK\Lib\x64;D:\Installed Softwares\DirectX SDK;D:\Installed Softwares\JDK\jdk\bin;C:\Program Files (x86)\Calibre2\;C:\Program Files\MySQL\MySQL Server 5.5\bin;C:\MinGW\bin;C:\tomcat\lib
    Thanking you,
    sidk47

    This is not a common problem and probably not related to the JRE directly. You have something installed on your system that is doing this. I hope for you it is some sort of trigger happy protection software which you can control yourself, but I would consider doing a full spyware, malware and virusscan sweep using a respectable piece of scanning software.
    If you want to believe it is related to Java, then completely uninstall your JRE/JDK, do a ccleaner registry cleanup and then reinstall the JRE/JDK. If the problem persists, it really is not the JRE.

  • How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

    How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
    Thanks
    Linda

    JS can not interact with open dialogs in any way, unless it's a dialog
    created in JS using the Dialog object.
    On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

  • How do I import a clip when the window automatically closes?

    I was unable to even open After Effects CC when I upgraded to OS Mavericks. Once I realized adobe released a patch for it (the 12.0.1 "trial" update), the program opened. I thought all was fine, until I attempted to import a new video clip. It would not let me even move the clip, let alone edit it, before giving me a "grouping" error, and then abruptly crashing. Today Adobe released the 12.1 update, which seems to be running ok, except the window for importing footage automatically closes once opened. I can no longer just drag a new clip in to my composition either. How can I get by this?
    -Christian

    See this:
    http://forums.adobe.com/message/5805902#5805902

  • Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

    Greetings all,
    I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
    I checked the "security settings (enhanced)" tab but the protected view option is already off.
    I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
    I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
    The problem occurs when:
    I open up a pdf file from outlook etc.
    I manually open a pdf file from windows explorer
    I open adobe acrobat with no file to view
    As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
    Thanks,

    Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
    That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

Maybe you are looking for

  • CD/DVD drive it's not supported by Windows XP and Bios

    I've bought a new cd/dvd drive Mat****a Panasonic. It only work on Windows 2000, it's not supported by Windows XP and Bios, so i can't boot with.

  • Where is the SOA-BPM 11g Amazon image?

    According to http://blogs.oracle.com/bpm/entry/bpm_11gr1_now_available_on_ama, an image for SOA Suite 11gR1 Patch-set 2 should be available under the Amazon EC2. But all I could find are a couple of old 10g images. Is the 11g EC2 image still availabl

  • Unable to find the Infosource in test box..

    I have to load data from ODS to another ODS which I have the data mart as infosource in development but the same infosource is not available in Test box but the infopackages are used in the processchains, whether I have to transport the infosource fr

  • E-mail Flyer

    Hi I want to send an e-mail as a flyer with all the graphics and links as on a web page. How do I do it? I can create web pages using Dreamweaver 2004 MX - but I don't know how to include them on an e-mail? Many thanks Greg

  • Amber light not working on mute button

    Hi. Have a Hp pavalion g6 2207 tx. And my operating system is windows proffional 64 bit. my mute button amber LED is not working ever since I updated my sound driver. plz help. m