Automating the process of changing SAP servers when one server is down

Hi,
We have observed that sometimes users are unable to run a CRM IC web application due to server being down.
So we want to automate the process that if a server is down then it will change to another server so that the application can run and the downtime is reduced.
Can you please let me know if anyone has done anything on this front.
Kindly send your suggestions.
Thanks in advance.
Regards,
Jaisish Mohanty

You can use sapwebdispatcher together with logon groups for this purpose:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/be/6041418e998739e10000000a1550b0/frameset.htm
Markus

Similar Messages

ACE slowness issue when one server goes down

Hi,
We are having two application servers.Both are load balanced using ACE.
When we bring down one server, we find that when we upload some files into the second application server, its too slow.
But when primary server comes up again the performance increases.This issue happens only when we bring the primary server down.
We are using cookie based stickiness.Any ideas where we can look into.
Rgds.,
Sachin

Depending on the load-balancing algorithm or predictor that you configure, the ACE performs a series of checks and calculations to determine which server can best service each client request. The ACE bases server selection on several factors including the source or destination address, cookies, URLs, HTTP headers, or the server with the fewest connections with respect to load.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/slb/guide/classlb.html

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
Thank you in advance,
Michael

Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

[svn] 1743: In the process of changing the messaging authentication tests to run over individual channels .

Revision: 1743
Author: [email protected]
Date: 2008-05-15 12:26:11 -0700 (Thu, 15 May 2008)
Log Message:
In the process of changing the messaging authentication tests to run over individual channels. Before the tests were just running over the first/default channel in the destination. Now the tests will be hardcoded to run over a particular channel. In this checkin I am removing the existing authentication tests and checking in tests that run over a polling amf channel. Tests for other channels are coming soon.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/messaging-config.mods.xml
Added Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MultiTopicMessagingAuthConSubscribeTest.mxml
Removed Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthSendSubscribeConstraintTest_Streaming.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MultiTopicMessagingAuthConSubscribeTest.mxml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

I am in the process of changing Iphones, I have synced everything from my old phone, how do i transfer it to the new phone??, I am in the process of changing Iphones, I have synced everything from my old phone, how do i transfer it to the new phone??

I am in the process of changing phones. I have synced all the information off my old phone onto itunes, i now wont to get this information onto my new phone, how do i do this??

Follow the directions here, this document even tells you what to do with your old phone:
http://support.apple.com/kb/ht2109

Can you Please Tell Me the Process for service/operation provide by one plant to other plant.

Can you Please Tell Me the Process for service/operation provide by one plant to other plant.
In My Company No Of Plants Like 1000,2000,3000,4000
Plant 1000 Provide the service/operation like (welding ,cutting, painting ) to other plants (eg 2000,3000,4000)
We want to give the profit for plant 1000 and book the service or operation charge in plant 2000 or 3000.
We don’t want to use material code in this process.
Can you help me it is possible or not through SAP PP.

Krishnendu,
Actually in my company we have one plant 1000 that plant provide the service like (CUTTING (SHAFT),WELDING,MACHINING,PAINTING)
actually plant already made one material xyz and supply 2000 plant .
we can use STO in this scenario and set special procurement key 80.
But my requirement is after some time plant 1000 provide few operation in xyz material that material already supply to 2000 plant.
in this case we dont use to produce any material.

BW: The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your reply

Hi Shivraj,
BW 3.5 version
Thanks

The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
Can anyone help me with this? Thanks in advance for your reply

When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.

How the process starts in XI and which one should start first ?

How the process starts in XI and which one should start first ?

XI flow :
1.File picked by the adapter,at the A.E it converts to XML format.
2.Generate a msg ID for the file and creates XI header to that file using CPA cache. CPA cache will be having the information about all the Control(address) data.
3.Module processor
4.The file goes to send queue by the adapter engine, that file will be picked by the internal XI adapter and the file will be forwarded to the Integration engine.
5.Pipeline steps follow the Integration Engine.
Receiver determination, Interface determination, Msg split, Msg mapping, Logical routing, Receiver aggrement, call adapter
6.The file will go to receive queue, which was taken and forwarded to the adapter engine.

How can I make my computer restart with all the same windows that were open when a shut it down?

How can I make my computer restart with all the same windows that were open when a shut it down?

That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:

Failover did not happen when one node went down!!! PLEASE HELP

Hi gurus,
Yesterday one disaster struck my RAC database. We have two node cluster and it is 10.2.0.2, both of them located in different sites, yesterday suddenly power went down and the one of the network switch went down and got destructed, node one of RAC database was connected to that switch, but the failover did not happen to the node two as this should be the case when one node goes down the other should be available for all the node one sessions/connections.
when I tried to ping/telnet the node 1, it was not happening because the switch was down, the network guyz connected the cables to other switch available. When I connected to the node 1, it was showing "Oracle is not available" message.
And when I tried the other node, it was the same case but I did not see any error in alert log file. Then my TL restarted both the nodes and then the database was available.
I am very confused that how the failover did not happen and how the database went down, PLEASE suggest something to how to identifiy what was happened. Thanks & Regards

Thanks for your reply,
after the network switch was replaced we connected to both the nodes and found that the instances are down with no reason given in the Alertlog file. We just restarted both the instances and then the database was up and the clients connected to both the instances with equal sessions on both the instances. I want to know that whether the failover can be done at the application side or it should be done on the database side i,e; in tnsnames.ora file with the required parameters? as in our scenario there is no failover configuration in the tnsnames.ora file.
Thanks & Regards

Problem in creating Jtree instance when X server is down

I am facing this problem while trying to build JTree object when X Server is down
I am using Redhat 8 and jdk1.3.1
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Problem creating javax.swing.plaf.metal.MetalLookAndFeel with method getSystemTextFont and args { : java.lang.reflec
java.lang.Exception: Stack trace
at java.lang.Thread.dumpStack(Thread.java:993)
at javax.swing.UIDefaults$ProxyLazyValue.createValue(UIDefaults.java:670)
at javax.swing.UIDefaults.get(UIDefaults.java:145)
at javax.swing.MultiUIDefaults.get(MultiUIDefaults.java:46)
at javax.swing.UIDefaults.getFont(UIDefaults.java:223)
at javax.swing.UIManager.getFont(UIManager.java:456)
at javax.swing.plaf.basic.BasicTreeUI.installDefaults(BasicTreeUI.java:5Xlib: No protocol specified
Problem creating javax.swing.plaf.metal.MetalLookAndFeel with method getSystemTextFont and args { : java.lang.reflec
java.lang.Exception: Stack trace
at java.lang.Thread.dumpStack(Thread.java:993)
at javax.swing.UIDefaults$ProxyLazyValue.createValue(UIDefaults.java:670)
at javax.swing.UIDefaults.get(UIDefaults.java:145)
at javax.swing.MultiUIDefaults.get(MultiUIDefaults.java:46)
at javax.swing.UIDefaults.getFont(UIDefaults.java:223)
at javax.swing.UIManager.getFont(UIManager.java:456)
at javax.swing.plaf.basic.BasicTreeUI.installDefaults(BasicTreeUI.java:591)
at javax.swing.plaf.basic.BasicTreeUI.installUI(BasicTreeUI.java:525)
at javax.swing.plaf.metal.MetalTreeUI.installUI(MetalTreeUI.java:83)
at javax.swing.JComponent.setUI(JComponent.java:322)
at javax.swing.JTree.setUI(JTree.java:537)
at javax.swing.JTree.updateUI(JTree.java:553)
at javax.swing.JTree.<init>(JTree.java:513)
at javax.swing.JTree.<init>(JTree.java:489)
at javax.swing.JTree.<init>(JTree.java:472)
at com.cygnet.constel.cygSdk.cygJS.CygTree.<init>(CygTree.java:15)
at com.cygnet.constel.cservs.cygManageIpInit.StringCreator.getDetails(StringCreator.java:54)
SampleTree.java Source code .
import javax.swing.tree.* ;
import javax.swing.* ;
public class SampleTree extends JTree
     public SampleTree() {
          super() ;
     public SampleTree( Object[] value ) {
          super( value ) ;
     public SampleTree( TreeModel newModel ) {
          super( newModel ) ;
this is the line creating problem
when my class is trying to call super( root )
     public SampleTree( TreeNode root ) {
          super( root ) ;
     public SampleTree( TreeNode root, boolean asksAllowsChildren ) {
          super( root , asksAllowsChildren ) ;
NOTE : when i log in to X server JTree object gets constructed properly
My requirment is it should also get constructed properly , even if X is down.
i tried hard and i am frusted
any help is appreciated
thank in advance
-- Nilesh

thanks thomas for your reply
but i think , we need to find out the point where it actually gets environment settings
there must be 2 things done before creation is done.
1]
Actual Construction of the Tree
2]
then getting look and feel of the underlaying OS
if we can find out step between 1 and 2 , we will get the problem ...
what say ??
dont think i am giving any suggestions to you . this is just what i think.
Please let me know if any of ur friends are facing the same problem.
-- Nilesh

Controlling Broadcasts Attempts when PreCalc Server is down

In BI 7.X, is there a way to control the number of attempt that the BIBCAST jobs make when Precalculation Server is down. We would prefer that it failed after a reasonable number of attempts instead of just trying over again every 30 seconds.
Any ideas?
Mitchell

Dan,
Try to append the LOCAL key word to your authentication-server-group statement in your tunnel group or group policy.
http://www.cisco.com/en/US/docs/security/asa/asa90/command/reference/a3.html#wp1719328
Thanks,
Sent from Cisco Technical Support iPad App

The process to change apple ID's on iPhone 4s without effecting apps

To give a bit of background on my situation, I bought my first iPhone (4s) a few months ago, and when I bought it the cell phone sales representive asked if I had an Apple ID. At the time I told him no, because I did not know exactly what it was so figured I did not have one. So he showed me where on my iPhone I could create and enter my Apple ID. When I got home I created one and have been using it on my iPhone ever since. A couple weeks after that I came to find out my iTunes account was also a Apple ID (when I signed up for iTunes years ago Apple ID did not exist). So I was not aware having a iTunes account automatically meant it was also my Apple ID. So now I have this dilemma where more original Apple ID has all my downloaded music on it, and my new Apple ID on my iPhone has all my apps on it! Ugh! So frustrating as I know you can not merge the 2 from reading the communities here. I also know from reading here that logging in with a different Apple ID on my iPhone will prevent me from updating apps. Luckily by time I realized I had 2 Apple ID's it was before I downloaded anything that cost money on my new one, so I am more than willing to forfeit it. So in the process of doing this I have a few questions to make it as easy as possible and to prevent any complications.
1.) Since signing into my iPhone 4s with a different Apple ID will prevent updates on existing apps, I would like to know if deleting ALL my apps (which I am willing to do since all the ones I have downloaded were free so far), will I be able to redownload them on my new Apple ID on the same iPhone without any complications redownloading the apps back, and without any complications updating them?
2.) Will changing my Apple ID on my iPhone effect anything else on my phone besides my apps? Keep in mind I have not downloaded any music on this Apple ID or on my iPhone yet. Will it effect my pictures or videos or contacts or my calender dates? Will it effect my iCloud account or is iCloud seperate from Apple ID or are they linked together?
3.) Lastly if deleting my apps and changing my Apple ID and redownloading them will prevent complications with my apps, after doing all of that how can I get rid of the mistake new Apple ID I made that I will no longer be using? I would like to use the email address that is on my new (mistake) Apple ID on my original Apple ID. So is there a away to have the new mistake Apple ID deleted after I switch everything? If so, then how?
I am off work next couple days and would like to get this resolved tomorrow or at least with in the next 2 days get everything switched over so I can finally sync my music onto it from my computer. I appreciate any responses and help.

go to appleid.apple.com to reset your apple id password.
Under where it reads manage id there are words that read 'reset password' click on this area to reset password.
Once you have the password to your apple id you will be good to go .
Good luck frined.

Automating the process of changing SAP servers when one server is down

Similar Messages

Maybe you are looking for