Automator to mount multiple ISO files on external USB drives

I have several ISO files on an external USB drive on a Mac mini. Double clicking on any of the ISO mounts it, one at a time.
I need to have an automator that mounts ALL ISO it can see on a given USB external drive. I have written an Apple script but that hangs up the Mac mini. I need help because I am not familiar with Applescript or Apple automator. I used Unix years ago, butg have a hard time with AppleScript.

Macs can't normally write to NTFS drives:
http://discussions.apple.com/click.jspa?searchID=7426620&messageID=4582486
Your other problem sounds like another computer has the files open or application has the files open simultaneously. Try shutting down your Mac, and isolating your Mac from any network and try rebooting again in safe mode by holding the shift key at startup.

Similar Messages

  • I am trying to reinstall Windows on my macbook pro.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

    I am trying to reinstall Windows (would not launch).  I removed the partition and started over.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."  I was successful before, what am I doing wrong this time?

    Try a restart.
    If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • Trouble accessing files on external USB drive after 10.6.8 update

    Upgraded to Mac 10.6.8 on my MacBook Pro (I'm not a techie, but the "About This Mac" thingy says 2.53 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3 - I assume that means something to somebody). Since the upgrade, I've been having problems accessing data on an external HD connected via USB - there were no issues before the upgrade, but now it's impossible to even navigate to a particular file or subfolder half the time, as the process freezes 95% of the time (every so often I am able to get through, for no obvious reason) - usually I just get what looks like an empty folder and a little spinning thing in the bottom right-hand corner. Sometimes when I do get to a file - say it's a ZIP file - I'll try to unZIP it and the process will hang; if I try to drag it to the desktop and unZIP it there, I can't get it to copy to the desktop, I just get the "copying files" box and a bar that never shows any progress, it just hangs at zero bytes out of whatever it might be.
    Also having intermittent issues with another external USB drive, which is the one I use for Time Machine - about one in every five backup attempts is successful, the rest of the time I get a message saying the backup couldn't be performed.
    I have two external FireWire drives as well, and I'm having no trouble with either of those - so I'm assuming the problem is USB-related (and 10.6.8 related, since none of this was happening before the upgrade).
    So - I'm wondering if anybody else is having the same issues, and f there's a solution that a non-techie like me could handle that won't make blood come out of my ears.
    Cheers!

    Thanks baltwo - the PRAM tip was helpful. For some reason I still have trouble accessing a few files, I'm putting that down to them being somehow corrupted. Eric, thanks, but I tried using Disk Utility and the communication problems I was having with the drive meant that the repair couldn't be performed. I may try again now that that side of things seems to be running a little more smoothly. Anyway, thank you both!

  • Windows 7 64-bit Copying files to external usb drive - files becomes corrupted.

    Hi All,
    I am getting intermittent problem with regards to copying files to usb external hard drive from my laptop.
    When file is copied to external drive, the file becomes corrupt from the external drive.
    I have to repeat around 2 to 3 times or more to re-copy the file again until file is not corrupted.
    Appreciate of any help.
    Below is my system info:
    Using Win 7 Ultimate 64-bit 4 gb of ram. 
    OS Name Microsoft Windows 7 Ultimate
    Version 6.1.7601 Service Pack 1 Build 7601
    Other OS Description  Not Available
    OS Manufacturer Microsoft Corporation
    System Name GIBBY-LAPTOP
    System Manufacturer Sony Corporation
    System Model VGN-SR26GN_B
    System Type x64-based PC
    Processor Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz, 2267 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date American Megatrends Inc. R1130Y1, 8/28/2009
    SMBIOS Version 2.4
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume2
    Locale United States
    Hardware Abstraction Layer Version = "6.1.7601.17514"
    User Name Gibby-Laptop\Gibby
    Time Zone Malay Peninsula Standard Time
    Installed Physical Memory (RAM) 4.00 GB
    Total Physical Memory 3.97 GB
    Available Physical Memory 2.60 GB
    Total Virtual Memory 7.93 GB
    Available Virtual Memory 6.05 GB
    Page File Space 3.97 GB
    Page File C:\pagefile.sys

    Ok, lets be brief.
    This problem is annoying me for years. It is totally reproducible although random. It happens when copying to external drives (mainly USB) when they are configured for "safe removal". I have had issues copying to NTFS and FAT32 partitions. I have
    had issues using 4 different computers, from 7 years old to brand new ones, using AMD or intel chipsets and totally different USB controllers, and using many different USB sticks, hard disks, etc. The only common thing in those computers is Windows 7 x64 and
    the external drives optimization for "safe removal". Installing Teracopy reduces the chances of data corrpution, but does not eliminate them completely. The only real workaround (tested for 2 years) is activating the write cache in the device manager
    properties of the drive. In that way, windows uses the same transfer mechanisms as for the internal drives, and everything is OK.
    MICROSOFT guys, there is a BIG BUG in windows 7 x64 external drives data transfer mechanism. There is a bug in the cache handling mechanism of the safe removal function. Nobody hears, I've been years talking about this in forums. It is a very dangerous bug
    because it is silent, and many non professional people is experiencing random errors in their backup data. PLEASE, INVESTIGATE THIS. YOU NEED TO FIX SUCH IMPORTANT BUG. IT IS UNBELIEVABLE THAT IT IS STILL THERE SINCE 2009!!!
    Hope this helps.

  • Problems copying files to external USB drive

    I am trying to copy my Pictures folder to an external drive, but I get the error below. I have checked permissions and that does not seem to be the problem. None of the files are open and neither is iPhoto, Photoshop Elements are any other program that would try to access the files. Can anybody help?
    "One or more items can't be copied. Do you want to skip them and copy the remaing items?"
    Thanks.

    So have you clicked through to copy them to see if any are missing? It may only indicate that there are some invisibles it cannot copy.
    -mj
    [email protected]

  • [SOLVED] Error mounting an ISO file located in an EncFS folder

    I have some multimedia files inside an EncFS folder (decrypted via cryptkeeper).
    When trying to loop mount the ISO files I get:
    mount: foo.iso: failed to setup loop device: Permission denied
    There's no error mounting the same ISO from a «regular» FS.
    Is there a way around this?
    Last edited by JoaoVidal (2014-02-24 06:36:42)

    unSpawn at linuxquestions.org answered:
    See 'man encfs': the warning at "--public" and 'man fuse': "allow_other"
    Without setting the option 'public' in encfs or 'allow_other' is fuse, not even root can access the encfs mount and therefore mounting fails (sudo mount...).
    Also, cryptkeeper now has the preference "Allow other users to access mounted folders" which gives exactly this kind of permission.

  • Mount cdrom_img (iso file) using CLI

    Hello all,
    I will like to mount a ISO file for OS install from the CLI and not the JAVA WEB UI.
    I Read that there is a StorageRedir file and stuff but I have problem to make it start (The Guide is very pure).
    My goal in the end is to install a server from CLI using Scripts and Code without human interruption.
    Thanks
    Nissim

    838225 wrote:
    This is a HW question because, this kind of things are possible only if you are using the ILOM.
    I will try to add more info:
    All of my servers are remote mange.
    The only way that I am able to connect to them is using network or ILOM.
    So in the end my question if some one have any recontamination on the way to work with the servers regardless to the OS and Platform ?
    Edited by: 838225 on Feb 20, 2011 4:15 AM... lofiadm and mount are OS commands.
    They are not functions native to the ILOM sub-platform, nor to OBP.
    You don't have a hardware component
    (such as a PSU or DIMM or a failing fan or a bezel LED, etc)
    barking an error at you, you have a system administration question.
    Your method of establishing a console connection is irrelevant to how you would handle the question.

  • [solved] fstab entry for user mounting of iso files?

    fstab entry for user mounting of iso files?
    I've seen it before but I can't seem to find it again.
    Last edited by eilenbeb (2010-03-21 20:11:40)

    I did, but couldn't find what I was looking for.
    I got fuseiso to work, and that will do the trick, so I'm marking this one solved.
    (I simply had to give 'others' write access to the mount point)
    Last edited by eilenbeb (2010-03-21 20:15:09)

  • VM installation with multiple .iso files

    Hello All:
    I have a windows image which spread across 3 iso files. So I started to install the VM from the first iso files, then it got to a point where it ask me for the 2nd iso file.
    This is where I am stuck. Does anyone successfully install a VM with multiple iso files?
    What is the correct procedure to do this installation?
    thanks,
    Peter
    Edited by: user3229804 on Jun 21, 2011 11:45 AM

    First thing, have you already imported (into VM Manager) the other CD/DVD's into separate .iso files?
    Then during installation, from open VNC Console window, make sure that you resize the window so that the lower portion is visible. There is a drop down button that will let you select a different .iso file, and a button next to it that says something like "Change Disk". This effectively lats you swap the DVD for the installation process to continue.
    Screen shots would be helpful here, but the key is resizing the VNC Console window, because duringmy install, the default window size cropped these buttons out.
    Hope this helps.

  • How to mount an .iso file to the cdrom

    Hi :
    could you give the instruction how to mount an iso file to be acting as the CD-Rom?
    Thanks a lot

    sorry, i didn't get your point.
    I tried with the following commands:
    mkdir -p /mnt/disk
    mount xxxx.iso /mnt/disk
    but i got some error messages. i guess i should put the "-F FSType" parameter after keyword mount, but what parameter should I use?
    Thanks

  • Single-user mode: How to mount and access an external USB drive?

    My MacBook Pro HD is acting up. Cannot boot normally or into "safe mode". Cannot reinstall OS without wiping out the HD. Need to recover some critical files but DiskUtil First Aid and Restore options cannot successfully complete. Problem traced down to "invalid node structure" which means I either have a hardware problem or my filesystem partition directory structure is corrupted. I need to recover some files that are not backed up (timin issue with my regular backup process).
    I can boot into single-user mode, mount the root file system (/sbin/mount -uw /) and can see/navigate the rot filesystem structure via good UNIX command line. Here's what I would like to do (in single-user mode):
    1. Mount an external USB drive (250 GB already formatted as Mac OS X Extended)
    2. Copy various files and/or directories from my HD to the external USB drive (UNIX cp command)
    I realize I could go spend $$ for the Disk Warrior or Data Rescue products (or something similar) that SHOULD help me recover my HD or files, but it seems silly to do this when I can see, touch and taste them from within single-user mode....
    Comments? Suggestions?
    TIA --
    Trent
    P.S. Once I've recovered my files, I'll try to reformat the HD and then reinstall the OS. And THEN go have Apple look at my machine (thank goodness for AppleCare coverage)!

    Resolution:
    1) Boot system in single-user mode (SUM) with external HD attached.
    2) Execute the following UNIX CLI commands once SUM boot process is completed:
    # fsck -fy
    # mount -uw /
    # mkdir /Volumes/target_directory
    # mount -t hfs -w /dev/diskXXX /Volumes/target_directory
    # cp -RXv /source_directory /Volumes/target_directory
    Where XXX is the device-level name for your external HD's data partition. In my case this was /dev/disk1s2. It may take some experimentation to identify this device name if your system has multiple HD's.
    3) Verify contents were successfully copied onto the /Volumes/target_directory.
    Comments and observations:
    - Do NOT use "/" as your source directory - cp will make a second (redundant) copy of /volumes/target_directory
    - I was able to successfully copy ALL files off my HD despite the fsck command's "invalid node structure" error message with this simple procedure. YMMV, depending on the state of your HD.
    - The repeated disk0s2: I/O error warnings displayed during the SUM boot process did not seem to have a negative effect on this procedure. I also received this same error warning intermittently as I navigated the mounted filesystem did not seem to be a problem, either. Again, YMMV.
    Commercial software:
    I downloaded ProSoft Engineering's Data Rescue 3 product (trial version) before spending $99 to attempt to recover my "bad" HD's data via mounting to a good system with FW target mode. It could not successfully complete its "QuickScan" process and immediately hung on block 0 of 390M during its "Deep Scan" process. The product did seem to function properly on an operational system. ProSoft's technical support was responsive and helpful but had no answer for my "Deep Scan" error.
    I did not attempt to use Alsoft's Disk Warrior 4 product. I could not find any trial software available and was reluctant to spend $100 based upon the mixed reviews and comments on this discussion forum as well as other reviews. Alsoft does claim to address the "invalid node structure" error in their marketing materials. Hindsight being 20/20 - I saved $100 by using this simple procedure.
    Final note:
    Neither Leopard nor Snow Leopard's installation DVD could recognize the bad internal HD when trying to do a reinstall. While DiskUtil was able to "see" the bad internal drive it immediately failed when I tried to do an "erase and format". Took the system to my local Apple store and the Genius ran a tool called "SMART Utility" from Volitans Software (www.volitans-software.com). SMART utility confirmed that my HD was bad so it was replaced. AppleCare pays for itself (once again!).

  • Cannot mount external USB drive with FDisk_partition_scheme

    Due to some recent mac issues in my lab, we updated one of the computers to Maverick 10.9.4 from Snow Leopard 10.6.8 yesterday. Anyhow, this seems to have erased the ability of the mac to read or mount several identical USB drives with the NTFS format (WD My Passport Ultra 500GB USB3.0). It could do it yesterday when it was OSX 10.6.8, but not today (OSX 10.9.4). The drives still work fine on other OSX 10.6.8, Windows 8.1 and Ubuntu 14.04 computers (this is appears to be a problem with the Maverick 10.9.4 operating system itself, rather than the flash drives which work flawlessly with every other computer I've tried). I want to remove data from the computer to create backups on the USB drives (no, I don't want to create an online backup or buy a new set of USB drives).
    diskutil can see the drives, but cannot verify or repair them as they lack a GUID (GPT) partition scheme. I'm assuming this is the root of the problem. Manually mounting the drives does not work. Installing the ntfs-3g driver also did not work (I was using this to write to the NTFS drives until we upgraded OS's). Installing the WD Passport drivers for OSX also did not work. How do I get the mac to mount these drives?
    I could reformat one USB drive and then copy to the others, but this would be extremely inconvenient and take days of copying files back and forth (and would prefer to fix the mac rather than go through this with every NTFS drive I own). If I did this, the FAT32 hard drive format would not be suitable, as format is unable to handle the extremely large sequencing datasets I need to transfer. I'm not super familiar with hard drive formats, but in the event we cannot get Maverick to actually work could someone possibly suggest a format able to handle large file sizes (the largest file I need to move is ~60GB) and be compatible with Windows 8.1 / OSX 10.9.4 / Ubuntu 14.04 as well?
    Another workaround I thought of would be just to install an Ubuntu partition on the mac and get the files off through the Linux install. Which is also inconvenient, but would probably be faster than trying to reformat the drives and copy everything over onto them again given the amount of data I want to transfer.
    Unrelated, but is there any way to view files and folders in the OSX root directory besides through Terminal? It seems like this functionality was also removed when we "upgraded" from Snow Leopard. (At this point, if it were up to me I would wipe all of the macs we own and replace them with Ubuntu... even the most minor of tasks always require some sort of workaround with them... at my wits end here ).

    Yeah this definitely appears to be a problem specifically with this mac. It's been having all sorts of weird problems lately, and we figured that upgrading to Maverick might fix them (but instead we got new problems).
    To give an update on this, I ended up reformatting one of the drives to HFS+ and disabled journaling. It now recognizes the drive again, and I'm pulling the files off that way. I looked at exFAT, but it looks like HFS+ has much better Linux support (Windows is read-only but that's only a minor annoyance, as the algorithms to process the data only run on UNIX machines anyways). It's a shame I couldn't keep using NTFS (had to copy over literally EVERYTHING again...) but whatever. Again, no solution for the issue (where this mac can't read NTFS drives).
    @rkaufmann87 - To give a bit more explanation, we recently had to disable online backups because apparently the sheer amount of data causes Time Machine to freeze the computer and fail every time it has a scheduled backup (original issue we thought that upgrading to Maverick would solve... didn't work). The hard drive has been having a lot of issues when it begins to reach max capacity as well. So I am pulling off all of my files to external hard drives and deleting the local copy before we attempt to back up online again. And the data would probably take me a year and a lot of money to recreate (for the curious, it's high throughput sequencing data). I'm choosing not to take any chances as a result.

  • Where do the MEDIA FILES live after I import them from camera to iMovie (Mac Mini OS X 10.9.2)?  I need to MOVE MEDIA FILES to external hard drive.

    Where do the MEDIA FILES live after I import them from camera to iMovie (Mac Mini OS X 10.9.2)?  I need to MOVE MEDIA FILES to external hard drive.

    Hello bbryson68,
    Thanks for using Apple Support Communities.
    From your post I understand you're wanting to move iMovie project and event data to another drive.  I found the following information in the iMovie help that answers your question.
    Copy or move projects, events, or clips between libraries or storage devices
    Connect a storage device that contains the target library to your Mac, or copy the target library to your Mac.
    Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries, locate an existing library on your Mac, or create a new library.The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
    In the Libraries list, select the event that contains the item you want to move or copy.
    In the browser, select the item you want to move or copy.Tip:  To select multiple clips or projects in the same library, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
    Do one of the following:
    To move items between events or libraries: Drag the clip or project to another event or library.
    To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
    Work with multiple libraries
    http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
    Take care,
    Alex H.

  • I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?

    I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.

    Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
    tt2

  • How do I restore iTunes library from Backup files on External Hard Drive?

    How do I restore iTunes library from Backup files on External Hard Drive and keep the new iTunes library on the External Hard Drive. I have all the media and playlist and .xml .itl files, just want the iTunes to recognise the content.
    I backedup my iTunes content by dragging to External Hard Drive. Formatted and reinstalled OS. My iTunes content is so large, that I wish for the Library and content to remain on the External Hard Drive. I have all the music files and playlists, I just cannot get the iTunes application to display all the content. Hoping to Not have to drag and drop all the content to be recopied into new iTunes organised files.
    Troubleshooting this by researching other conversations on the web, I have come stuck for a solution. One Troubleshoot told me to hold down the Command key and then lauch iTunes and a dialogue box will appear to Choose a new library, however when I try this, no Dialogue box appear to give me the option!?

    It sometimes has that funny switch symbol on it too.  
    tt2

Maybe you are looking for