Autonomous transactions not seeing posted data

I want to add a button to a form to call a report. The users want to update data in the form, run the report then decide if the data is to be committed. I can post the changed data but the report doesn't see the posted data as Oracle starts a new session.
The report performs various calculations and before it is run, the calculations are performed and data extracted to separate tables, the report then runs on the extracted data then the temporary table data is deleted.
I thought autonomous transactions would be my solution. The data is posted within forms, the form then calls a database procedure which has the autonomous procedure declared, data extracted and committed to the temporary tables within the autonomous transaction (form data stays uncommitted), report runs using the extracted data. User could then decide if the amended data could then be committed to the database.
The autonomous transaction does not seem to see the posted data. The procedure picks up the data 'pre post'. Any ideas on what I can do to get round this?
Thanks in advance
Karen Stalker

Thanks for all the replies.
My form that will call the report can call up to 12 other forms with data always posted and never committed until the user is prompted to on leaving the main form, or the user presses the commit key. I liked the idea of writing to a temporary table but the way this application is designed, this would mean a big rewrite of a lot of complicated forms. I would rather leave them alone as they work!!
I could pass the record groups into the report - this would mean about 15 groups but that shouldn't be a problem except that there are a few child queries which I read can't be done that way. This may be a daft question but can I pass the record groups into the report and the record groups be then used in the after parameter trigger. There I could do all the necessary complications, write to my extract tables and then carry on as normal - i.e. the report gets the data from these extract tables.
My best solution would be to get the reports and forms to run in the same session but how can I do this? As far as I'm aware, RUN_REPORT_OBJECT starts a new session. Hopefully someone knows how to get them in the same session.
Thanks again
Karen

Similar Messages

  • How to know the type of transactions by seeing the data in IP_IN_QUEUE

    Hi B2B gurus,
    I am Using EDI X12 over internet. Our suppliers processing inbound transactions to us,After receiving from B2B its storing in IP_IN_Queue, The documents which we are sending it storing in IP_OUT_Queue.
    We want to see the data in in IP_IN_QUEUE, Could you please tell in which table the data will store, And can we see the payload or can we know actually which transactions by seeing the data in table? Could you please help by giving this information...?
    regards
    srinivas k

    As I mentioned earlier view "b2b_instancemessage" has "payload" column which stores the payload of both incoming and outgoing messages.
    Below query will return all the rows of this view which has payload -
    select * from b2b_instancemessage where payload is not null;
    Remember, it's a BLOB type field so either use a client like PL-SQL Developer or TOAD otherwise write a java client to view the content of this column.
    Regards,
    Anuj

  • Final user's can not see the data due to limited authorization.

    We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location  0RT_LOCATIO.
    0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
    We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
    My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
    Does anyone how to do this (if possible)?
    Thanks in advance!

    Just do two things to find the authorization check failed for that user.
    1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
    2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
    Do this way, if it is not successful you can go for any other alternate way.
    Hope this would help you.

  • Why in SE16 we can not  see New Data Table for standard DSO

    Hi,
    We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not  see New Data Table of Standard DSO.
    Regards,
    Sushant

    Hi Sushant,
    It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
    Sankar Kumar

  • Do not see "Post New Topic" in MacBook Pro forum

    In the MacBook Pro forum I do not see "Post New Topic" at the top of the page as I do on others.
    I am logged in and can see my questions and profile.
    MacBook Pro 15" / OS X / Windows XP (BootCamp)   Mac OS X (10.4.7)   MacBook Pro 15" 1.8 GHz / 80 Gb / 512 Ram

    Daniel,
    Please see this post a little ways down this page.
    Several people have already answered this for you.
    (I know, it can be confusing sometimes.)
    http://discussions.apple.com/thread.jspa?threadID=561477&tstart=0
    Hope that will help you figure it out.

  • Transaction to see common data between two tables

    Is there any transaction to see common data between two tables with out creating views.
    what is the transaction to see the link between two tables
    regards
    pavan

    Hi,
            Go to a transparent table for which you want to know the common fields, from there click the button GRAPHICS (shortcut Ctrl + Shift + F11) in the application tool bar. Then you are redirected to a list containing the tables belonging to the same group. There select whatever tables you would like to see and click COPY. A window will pop-up and will show the relationship between the fields of the tables in a flow chart format.
    see to this link also.
    Common fields b/w  tables
    Regards,
    Revathi Bhoopal.

  • My preferences are set to 'show informational overlay' but when I scroll through events I do not see the date as I'm supposed to. I only see the date underneath the event. What am i doing wrong?

    I so not see the date as I scroll through my events and I have my preferences set to 'show informational overlay'. They only date I see is below the event. What am I doing wrong?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • Why can I not see the date messages are sent anymore

    Why can I not see the date messages have been sent anymore

    Drag your finger from right to left to reveal the time

  • Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

    I am looking in this table with SQLPlus and TOAD and can not see any rows.

    Hi Hussein;
    First I ran:
    select fu.user_name, fr.responsibility_name
    , fu.user_id, fr.responsibility_id resp_id
    , furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
    from apps.fnd_user_resp_groups furg
    , apps.fnd_user fu
    , apps.fnd_responsibility_vl fr
    where furg.user_id = fu.user_id
    and upper(fu.user_name) = upper('&User_Name')
    and furg.responsibility_id = fr.responsibility_id
    order by 1, 3
    Passing in SYSADMIN
    Taking this row:
    SYSADMIN,General Ledger Super User,0,20434,101,0
    I ran:
    I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
    I still get no rows returned.
    Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

  • Can not see the data in the grid

    Hi,
    nice to see the new features, but I can not see the the table inserts
    in the data grid - the <data> rider is not clickable.
    Regards

    Hi annerose,
    This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
    1) Back up any important Raptor files, e.g. connections etc.
    2) Remove the existing Raptor Rel 1 installation folder
    3) Install Raptor Rel 2
    Hope this helps
    ady

  • Could not see the data in the report

    Hi,
    BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
    when I am logging in another machine i am able to see the data.Please help me in solving this issue.
    Thanks in Advance.
    Regards,
    Spandana.

    Spandana,
    As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
    Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
    Hope it should solves the issue.
    If you want to see the data:(now with yellow & blue)
    Select Column == properties == Read cell content as, change it to HTML.
    Thank You!!
    Sent from iPhone

  • Could not see the data in the cube

    Hi all,
    Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
    I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new)  which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
    Can anyone plz help me out.
    Thanks in advance.
    Thanks,
    Preethi.

    Hi Balu,
    I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
    I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
    Hope its clear.
    Thanks,
    Preethi.

  • Drag and relate filter on AP Invoices not showing post dates past Dec2010

    Hello experts,
    Using the following version: 2007A (8.00.178) SP:00, PL:44
    The customer is getting the following issue.
    In drag and relate bringing up AP Invoices, the latest AP invoice is for 21/01/2011. When the customer tries to filter by posting date, the drop down list of dates only goes down to 27/12/2010.
    Using drag and relate for other documents such as the credit notes this issue is not seen and the date goes into 2011.
    Can anyone tell me how I can solve this issue or if this is a bug with the version the customer is using ?
    Thank you
    Andy

    Hi Andy,
    It might be version related. Try on a high version. PL44 is too low.
    Check period indicator too.
    Thanks,
    Gordon

  • Firefox is not receiving POST data correctly from web form.

    I am working on a website and I use firefox for alot of the testing and debugging.
    Recently I have been having a problem, where in the PHP script I am POSTing some form data to another page to run the script, and my web server keeps getting the error log "PHP Notice: Undefined index: *mypostfield*"
    I look this error up online, and it says that it means the POST value for *mypostfield* is empty.
    I do the same thing in IE, Chrome, and Safari, and it works fine, data is sent properly and everything works.
    I have disabled all add-ons, still the same, reinstall, still the same.
    Windows 7 64-bit. Firefox 8 & 9

    Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    * If you use extensions (Tools > Add-ons > Extension) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    See also:
    * [[Websites look wrong]]
    * [[Website colors are wrong]]

  • Can not see historical data in Time Machine backup

    Hi folks
    First my setup:
       MBP Late2012
       Samsung Evo 840 SSD
       external USB 3.0 1TB as TimeMachine HD
       Mac OS X Mavericks
    Now my problem.
    After updating to Mavericks I've made a full backup with Time Machine.
    Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
    A clean setup of Mavericks follows.
    After that I restored the Backup from Time Machine.
    Everything ok. Til now.
    Because everthing works fine in the past, I did not control the Time Machine.
    Today I wanna restore a File from my "Pictures" folder.
    So I opened Time Machine.
    Oops.
    There I can only see the latest run.
    Also in the timeline on the right side the only entries are TODAY and NOW.
    I can not scroll into the past.
    All windows behind the current window have a black titlebar.
    In Mountain lion the titlebars are grey if there is data available
    and the title contains the date of the backup.
    What is the problem?
    Is there a bug?
    Did I something wrong?
    Thanx in adv.
          Stoiker

    Hi masong517
    What a treasure trove of hints and solutions.
    I didn't know this page.
    But  you are right with "E2".
    This solved my problem.
    Thank you very much.

Maybe you are looking for