Autopopulate data in listitem based on the value of data in other itemlist

Hi,
In my project there is requirement of populating the data in based on the value populated in other list item.
For ex in list box item we select value 'PE' then in second list box based value of PE should be populated.If we select other value for ex 'PA' then in second list other valu is populated.So how can we populate the data in second itemlist based on the value selected in the first listitem

Hello,
<p>In this article, you can find a dialog sample that does that (section : 2.4.2)</p>
Francois

Similar Messages

Plot a chart dynamically based on the values selected

Hi All,
I have some requirement like this i want to plot a chart . The chart should change dynamically based on target_name and date. What type of UI should I use ? I tried using multiselect or shuttle for choosing the target_name and date picker tool for date once i choose all this the chart should appear. Can I have a custom button called submit so once all the values are entered it plots chart ? Please help me out with our ideas.
Thanks in Advance

Hi,
Using the dependent value sets you can govern the values which can be selected based on a specific value selected in a particular segment. Example if Country name is selected in segment 1 then specific states names as per the country selected can be displayed in segment 2.
As per the requirement described you want to enable different fields based on the value selected in segment1, currently there is no standard mechanism available to enable/disable fields based on a value and you will have to do an extension/customization to meet this requirement.
Thanks,
Sanjay

Is there an easy way to filter a 2-d array based on the values of two of the fields?

Is there an easy way to filter a 2-d array based on the values of one of the fields. In my attached VI the output array has the following format:
TimeStamp        Ident                Frame Type        Bytes    Data
10:57:07.621   3AD00016   CAN Data Frame   8          0000000000000000
10:57:07.622   3AD00017   CAN Data Frame   8          000005E000000000
10:57:07.624   3AD00018   CAN Data Frame   8          0000000003300000
10:57:07.625   2DC00000   CAN Data Frame   8          0000000000000000
10:57:07.626   3AD00019   CAN Data Frame    4         0000030000000000
I would like to delete any rows that do not have an "Ident" between the values of 3AD00000 and 3AD0001E. So for the above data the fourth row would be deleted. The only way I can see to do it is to form a 1-d array. Is there a better approach?
Thank you.
Solved!
Go to Solution.
Attachments:
CMM_SN_MULTI.vi ‏20 KB

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

SSIS - Loop through files from a file path based on the value in the variable

Experts,
I have a requirement where I'll be loading multiple files in to a SQL server table and archive the files when loaded. However, the challenge is , the file path should be dynamic based on the value of a variable (say, @ProductName).
For example: If I am running the package for variable @ProductName="Product", the file path would be "\\....\Src\Product", in that case the ForEachLoop will loop through all the files in that folder, load them to the table and Archive
the files to the "\\....\Src\Product\Archive" folder.
Similarly, if the @ProductName="Product_NCP", the foreachloop container should loop through files in the "\\....\Src\Product_NCP" folder, load them to the table and archive them to the ""\\....\Src\Product_NCP\Archive"
folder.
Any suggestions? I should be able to run the package manually just by passing the "@Product" value, create Archive folder if it doesn't exist, load the data and archive the files.

Yes
1. Have a variable inside SSIS to get folder path. Set path based on your rule using an expression
like
(@[User::ProductName] == "Product" ? "\\....\Src\Product" : (@[User::ProductName] == "Product_NCP" ? \\....\Src\Product_NCP:..))
similary archive
(@[User::ProductName] == "Product" ? "\\....\Src\Product\Archive" : (@[User::ProductName] == "Product_NCP" ? "\\....\Src\Product_NCP\Archive" :..))
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Count the number of rows based on the values!!!

Hi all,
What I am using:
I am working with a multidimensional database in Visual Studio 2010 using its Data source view and calculation member and dimension usage.
What I want to do:
I have a fact table that has five columns(leg(s),hand(s), Head and body,overall) that shows the category of how severe the injury is. Let say for the records all columns never have an empty value(no injury is stated with 'No injury' ) . These five columns
are connected with a dimension that has all the available values (Category A-E of injury).The overall has the most severe from the other four columns. I want to create a bar chart with five different measure
values, one for each column, and count the values in those columns.
For example : I have a slicer in the excel and a bar chart and the slicer has all the values of the Category of the injury ( Cat a,Cat B, Cat C, ... Cat E, No injury ) and when i select one of them, lets say
Cat C, the bar chart should update and show how many Cat C each measurement column has.
Example FACT table:
ID LEG HAND HEAD BODY OVERALL
1 No A No No A
2 No D C C C
3 E C D A A
4 E E B C B
So if i selected C the bar chart will count (Leg = 0, Hand = 1, Head = 1, body = 2 and Overall = 1).
Any ideas ?
Thanks for the help and the time :)

Hi DBtheoN,
According to your description, you want to create a chart on excel worksheet to count the rows based on the value, right? If in this case, I am afraid this issue is related to Office forum, I am not the expert of Office, you can post the issue on the corresponding
forum.
However, this requirement can be done easily on SQL Server Reporting Services. You can using the expression below to count the rows.
=COUNT(IIF(Fields!LEG.Value=Parameters!TYPE.Value,1,NOTHING))
Regards,
Charlie Liao
TechNet Community Support

F4 help based on the Value in other field

Hello
I have a requirement in which there are two fields say field1 and field 2 in an ALV grid (in which new data can be entered). The F4 help of field 2 should be based on the value the user enters on field1.I have checked out the BC_ALV* programs but there are no clear help .
I have tried setting the parameter id of the first field value and then get that parameter id on_f4 event of the second field.But where can i set the parameter id of the first field . on_f4 of first field does not have its value and there is no event after_f4 . There is a parameter e_afterf4 in data change event but to tirgger that there shud be some event right.
Moreover If at all i get the first field value , i can use FM F4_int_table_value_request to show the refined f4 in field 2 . But I am passing the a field symbol table in my grids set table for first display . what can i pass as parameters here to the FM F4_int_table_value_request?

hello Kallu ,
gt_f4_wa-getbefore = 'X'. --->refreshing layout before F4
gt_f4_wa-chngeafter = 'X'--> refreshing layout after f4.
see the sample code of F4...no need to pass dynpro details.....
*---locals.
data: lt_return type table of ddshretval,
         ls_return type ddshretval,
         begin of lt_kostl occurs 0,
          kokrs type kokrs,
          datbi type datbi,
          bukrs type bukrs,
          prctr type prctr,
         end of lt_kostl,
         ls_f4           type lvc_s_modi.
field-symbols: <ls_wa>         type any,
                <t_f4> type lvc_t_modi.
*---get defalut values.
refresh lt_kostl.
select kokrs
         kostl as prctr
         datbi
         bukrs
    from csks
    into corresponding fields of table lt_kostl
           where kokrs eq g_kokrs
             and datbi ge sy-datum
             and bukrs eq yfit_00049-bukrs.
*---call fm to display int values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'YFIT_00050-PRCTR'
      window_title    = 'Profit Center list'
      value_org       = 'S'
      display         = space
    tables
      value_tab       = lt_kostl
      return_tab      = lt_return
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table lt_return into ls_return
               with key fieldname = 'F0004'.
    if sy-subrc eq 0.
      assign er_event_data->m_data->* to <t_f4>.
      ls_f4-fieldname = e_fieldname.
      ls_f4-row_id    = es_row_no-row_id.
      ls_f4-value     = ls_return-fieldval.
      ls_f4-error     = space.
      ls_f4-tabix     = space.
      ls_f4-style     = space.
      ls_f4-style2    = space.
      ls_f4-style3    = space.
      ls_f4-style4    = space.
      append ls_f4 to <t_f4>.
    endif.
endif.
er_event_data->m_event_handled = 'X'.
regards
Prabhu

ADF Table cell color based on the value in that field

Dear All,
I want to create a table for our new application which contains a table used to represent the data in a chart format or matrix format,
and each cell of the table should be filled with a colour out of three colors, based on the value belongs to which range eg:(1-8 ->green, 9-20 - yellow etc),
I dont know how to implement this. Please help...
Ranjith

Check this out.
How to highlight ADF table row based on column value?
-Arun

Different heading label based on the value!

i have IR report ...
sl no
street
Ph
notes
this label never
to show here!
dynamic label
(ASIA)
(EUROPE)
1
2 nd st
96541
notes 1
ASIA
INDIA
2
2nd st
65841
notes 2
EUROPE
UK
3
2nd
5648
note 3
EUROPE
GERMANY
i have condition when the user logged from region wise,the region value should goes to label in Dynamic label as HEADING! how its possible?
Thanx,
Ram.

Ramani_vadakadu wrote:
Yes i did the validation based on the LOV to affect &ITEM_LABEL ! how can use this validation in pre-validation? please login and do the sample one based on the value(real data means my 1st query in thread)!
https://apex.oracle.com/pls/apex/f?p=29288:1:9453626954797:::::
Wks:ram_r&d
user/password: aramani/apex
I have no idea what you mean. There is no validation involved. Not only did I never mention validation, you are claiming that you "did the validation", yet there is no validation on your page at all. I suspect that you are using the term "validation" in a very different way from its APEX-specific meaning.
The component that is required in this case is a page computation with a Before Header computation point.

Needs Query to get the cycle time automatically based on the value provided in the UDF on OWOR table

Dear all,
Need a query to get the Cycle time in hr based on the value provide in the udf on OWOR table.
Details of UDF:-
1.Start date =10/07/14 (Field Name U_EA_REST)
2.Start time =10:00        (Field Name U_EA_REASTARTTIME)
3.End date =11/07/14    (Field Name U_EA_REET)
4.End Time=14:00          (Field Name U_EA_REAENDTIME
Cycle Time=_______      (Field Name U_EA_REACYCLETIME)
Regards,
BanugopanRajendran

Dear all,
Need a query to get the Cycle time in hr based on the value provide in the udf on OWOR table.
Details of UDF:-
1.Start date =10/07/14 (Field Name U_EA_REST)   - Date Type
2.Start time =10:00        (Field Name U_EA_REASTARTTIME) - Hour Type
3.End date =11/07/14    (Field Name U_EA_REET) - Date Type
4.End Time=14:00          (Field Name U_EA_REAENDTIME - Hour Type
Cycle Time=_______      (Field Name U_EA_REACYCLETIME) - Hour Type
Regards,
BanugopanRajendran

Validating an attribute based on the value of another while inserting

Hi guys
I need to validate an attribute based on the value of another attribute.
Example:
inside some entity I have the following validation function
public boolean validateAtt1(Number data){
     if (this.getAtt2() < some vlaue)
          return false;
     return true;
this function works fine when I'm updating a record, but when I'm inserting a new record the this.getAtt2 return null, now I don't want to override the validateEntity function I want to override the validate function for att1; so in other words is there a way to reach att2 in the validation function of att1 when I'm inserting a new record, because the this.getAtt2() returns null if I'm inserting a new record.

Using attribute-level setter methods won't work because when the value of a particular attribute is being set, the values of the other attributes might not yet have been set. This explains for example why it does not work when inserting a new record. You therefore have to validate at entity level.
Rather than coding on the validateEntity() method you use a built-in Validator or Method Validator. When recording validators like this, you can provide a separate message for each business rule. If you also have the bundled exception mode enables (which will be the case by default for web applications), then multiple messages can be shown at the same time.
If you have one business rule involving two different attributes, for example a and b, and you must provide different messages based on if a is causing the violation or b, you can do it like this:
- implement one method doing the validation and that will indicate which attribute is causing the violation
- implement two different method validators (with two different messages) that call the method doing the actual validation and return false based on the attribute causing the violation
For more information about implementing business rules in ADF BC, you might have a look at this white paper:
http://www.oracle.com/technology/products/jdev/collateral/papers/10131/businessrulesinadfbctechnicalwp.pdf
Jan Kettenis

Setting the Link Group Name in Deep Link based on the value of a column

Using Jdeveloper 11g, Jheadstart 11g
Is it possible to override the link group name in deep linking. For example can I conditionally set that field based on the value of the item.
Regards
Edited by: aliegeh on Jul 25, 2010 8:35 AM
Edited by: aliegeh on Jul 25, 2010 8:43 AM

Thanks for the suggestion.
Here is what I am trying to do:
I have a table with one visible column that has the following entries:
1. Create
2. Modify
3. Verify
4. Approve
5. View
If the user clicks on row 1 (Create) then the link group name should be "CreateEmployees" to create new employees
If the user clicks on row 3 (Verify) then the link group name should be "MaintainEmployees" for verification and so on.
(This is role based and each role will have access to one or more of the rows in the tabler)
It basically mimics a work-flow type of scenario.
I tried to modify the template and looked at the line:
action="$JHS.facesConfigGenerator.addItemGroupLinkTaskFlowCall((${JHS.Current.item})}" but got stuck there.
Is there a way to change "JSH.current.item" in the template to read the group link name from another column say by using #if statements.
One way I also tried was to introduce a column for each action such as CreateAction, VerifyAction etc which kind of agrees with your suggestion but the drawback is the need to modify the table if another task is required.
Regards
Edited by: aliegeh on Jul 25, 2010 8:36 AM
Edited by: aliegeh on Jul 25, 2010 8:42 AM

Assign Task to a specific user based on the value of DDL from the form

Hello,
Can any one please advise me on how to assign a task to a specific user based on the value of the drop down list from the form. E.g. user fills the form and before they submit the form they have to select one of the name from the drop down list so the form can go to that person for approval.
Thanks in advance,
Han

I got it works now by using the xpath expression (in workbench) to assign to the selected user from the DDL in the form.

Creation of a new record based on the value of a picklist

Hi,
My requirement is whenever i select a picklist value in Opportunity record type based on the value selected a new opprtunity record should get created and get assigned to a role or A User otherwise a lead should get created and should be assigned to a Role or A User.
Can I achieve this in OnDemand?
Kindly help. This is urgent..
Thanks in Advance.

Can I achieve this in OnDemand?I think you can better try one of the Oracle CRM On Demand forums @ http://forums.oracle.com/forums/category.jspa?categoryID=162
instead of the Oracle SQL and PL/SQL forum.
This is urgent..The forums are relying on volunteers and it is weekend for most of us now.
If it is really that urgent, call Oracle Support.

Populate one text field on a form based on the value in another

I am new to APEX and building my first application.
When a user enters a value in one field, I would like to run a SQL command and then display a value in another field based on the value in the first field. For instance, if a user enters a part number in one field, when they tab off of the field, I would like to display the name of the part in the part name field.
Thanks

Thanks. That put me on the right track. I used that link to find the link http://htmldb.oracle.com/pls/otn/f?p=11933:11:2890374750690437 and then using the two was able to put together a solution.
I am down to one last issue. I am able to return the name back from the process and display it with an alert statement. Unfortunately, I am unable to display the value on the form.
I am doing the following.
<script language="JavaScript1.1" type="text/javascript">
function f_getCustomerName(id)
var v_id = id;
var get = new htmldb_Get(null,$v('pFlowId'),'APPLICATION_PROCESS=getCustomerName',$v('pFlowStepId'));
get.addParam('x01',$v('P2_CUSTOMER_ID'));
gReturn = get.get();
get = null;
gReturn = (!gReturn)?'null':gReturn;
/* The below do not work
$s('P2_CUSTOMER_NAME',gReturn);
document.getElementById('P2_CUSTOMER_NAME').value = gReturn;
document.getElementById('P2_CUSTOMER_NAME').value = 'TEST';
alert(document.getElementById('P2_CUSTOMER_NAME').value );
alert(gReturn);
//-->
</script>
Process: getCustomerName
declare
l_customer_id customer.customer_id%type;
l_customer_name customer.customer_name%type;
begin
l_customer_id := to_number(wwv_flow.g_x01);
select customer_name
into l_customer_name
from customer
where customer_id = l_customer_id;
htp.p(l_customer_name);
end;

Sorting an array based on the value of another array

Hi
Ive got 2 arrys... An Integer[]{11,12,23,24,25};
and another one double[]{60,79,83,54,67};
i wanna sort the first array based on the values of the second array..
ie my result should be double[]{83,79,67,60,54} and
Integer[]={23,12,25,11,24}...........
is thr any easy method to do tis..

You should make a class with the int and the double as fields; and have your class implement Comparable to compare on the double the way you want; and just have an array of objects of this class, and sort it.
Because the corresponding elements in your arrays are essentially linked, so they should be together.
Edited by: spoon_ on Apr 12, 2008 2:17 AM

Autopopulate data in listitem based on the value of data in other itemlist

Similar Messages

Maybe you are looking for