Autorotate bug with 5800 - hope Nokia reads this.

Hi
I've seen other posts on this issue but thought I'd posy my experience.
A few weeks after getting this phone (and installing a few apps), the autorotate became erratic e.g. stuck in landscape or portrait & wouldn't respond to phone movements
I called Nokia support and after a rather painful conversation (poor line, broken English), I ended up doing a complete reset, which worked.
Reinstalled apps and it worked fine for a few weeks.
Have also installed some music to my memory card.
Now it's become erratic again - and the sensor appears to work because the Spirit Level app works fine.
The only way I can get it to work properly is by starting the phone 3 times - after 1st autorotate doesn't work at all. After the 2nd it's stuck in landscape. After the 3rd it works.
So at least (for the moment) I can get it to work - but hardly ideal !!
I don't appear to be alone with this problem, so I hope Nokia can find out where the problem lies & fix it.
PS I'm on v4 software (no v5 upgrade for O2 in UK yet).

I haven't actually tried the phone for a prolonged period without any apps installed, so not sure about the incompatibility suggestion. May be it would do the same then as well after a few weeks ?
As I said, it did run for a few weeks fine (without adding any further apps).
I'd be interested to know how an app that's not running can screw up the autorotate for the phone software, but still allow another app to run with the sensor working fine (Spirit Level).
How do I reinstall the v4 software ? Will it damage any data/apps ?

Similar Messages

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again.

Persistent Aggregates bug with logic - anyone else see this ?

A long while ago I posted a bug report regarding the use of aggregates with the Stealthplug guitar audio interface. I also reported this on the apple bug report system.
Basically, when using Logic8 with stealthplug and OSX Tiger ( latest 10.4 ) I configured an aggregate using AudioMIDI setup program, configuring Stealthplug as the input and the built in audio as the output.
When one creates an audio track with the aggregate name selected I Logic8
preferences INITIALLY one can get audio input to show up, the "record" button appears and one can hear audio output to the main macbook audio outputs. However on repeated use and selection/deseletion of the particular named aggregate one finds that the stealthplug input is no longer enabled ( the record button disappears).
I found out recently that if I delete the aggregate ( I only had one aggregate st up ) and create a NEW aggregate, this time with a different name, but with the same settings ( stealthplug as input, built in outputs as output ) then one can get the aggregate to work initially in logic8. However after a few sessions, or switching between audo devices in preferences, the aggregate again fails to work, by this i mean I no longer get the "R" button appearing in the channel strip for the input.
Stealthplug works fine when selected itself if one selects this as the device, but NOT when used through an aggregate. I suspect this is something to to do with aggregates and not stealthplug.
My suspicions is that it has something to do with the way logic8 or the CoreAudio system stores its aggregate preference information since I find that if I delete the original aggregate but recreate the same aggregate settings using a different name then the aggregate will work for a short time.
This really needs fixing since aggregates are potentially so useful.
Anyone else seen this with stealthplug or another audi interface ? is the Aggregates system just plain buggy? dos this problem go away in Leopard ?

Well I can say that after installing updates to QuickTime is appears I have been having a lot of trouble with Aggregate Devices as well. I use 2 896HD MOTU interfaces and after a few sessions of Logic, the Aggregate device stops working. I can either (a) reset the computer, (b) sometimes reset the coreAudio driver (works rarely) or (c) create a new Aggregate device like you have and it all starts working again.
Even worse, some of my USB MIDI interfaces like the Fantom X7 just loose connection as well. If I remove the USB and then plug back in, it's recognized again immediately.
Something is seriously broken and I have NO clue where to begin to help fix it. The only thing I could do is re-install OSX 10.5 and not do the quicktime updates and see if that helps. Unfortunately, that is a LOT of work! (I use like 146 AU plugins total).

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

I need an opinion, now that I have a 500GB TC...I hope someone reads this

So originally I asked for just a plain ole external hard drive for Christmas for my 3 year old PowerBook G4 laptop. Then I started doing some research, cuz I kinda realized I wanted something wireless so that I didn't have to go through the hassle of unplugging it every time I needed to take my laptop away from my house. Currently this is how I run things....I have lots of music and that's what's taking up the majority of my internal HD space. I do a little freelance design and am also a photographer. I have, for the time being, a small external hard drive that holds my files (design work, photos, etc). I have very little files that I update on my internal HD (like I said, it's mainly music). I have an iPod that most of the music on my laptop is on (I don't keep it synced, honestly that's not really a worry for me). So when I started looking into my options, I read about the Time Capsule. Of course the opinions on the Apple Store site were mixed, but it still sounded good, so I asked for one and got it. I like that it worked wirelessly, worked with Time Machine (which has gone unused since I upgraded to Leopard last Christmas), and according to Apple I could also use it as an external HD. Now that I am reading the TC forum (after having initial problems with the TC, which required the TC to be exchanged for a new one on Monday) I really do not know what to do with it. I am reading that if you do use it as both a backup system AND external HD it gets a little "tempermental." Some people have lost all backups and files due to inexplicable disc errors and such. I have read that you can hook up an external HD through USB to the TC and access it wirelessly and put your iTunes library and music on that external HD, but then it won't be backed up. Like I said at this time, I work on files by getting the files I work on off of my small external (which is filing up fast) work on them, and then save them back on the external....Ok now I'm rambling a bit...My question is
Should I just use the TC as an external HD or use it to back up and get another external HD to connect to that....Then I can't attach a printer to the TC via USB....AHHHH too many options...What would you do??

Just thought I'd throw my thoughts into the mix, although essentially I agree with VA2020. I have similar requirements for my set up: I have a laptop, which I keep my current working files on and therefore want to have backed up regularly (by Time Machine). However, I also want to be able to play my iTunes library at home, from wherever I happen to be. So I have a Time Capsule for backing up, with an external 500GB HDD (connected to that via USB) which I use as a music and image server. I also got a wireless combo-printer to take that issue out of the equation; and to make sure my music/images are backed up, I actually use the free Back Up software you get with a MobileMe account, scheduled to back up at suitable intervals via firewire to yet another 500GB HDD (these back ups are weekly/monthly, so it's not a big deal to hook up the laptop just at those times).
I am also planning to use SuperDuper to backup the entire laptop system (I leave out apps, system files etc from the TM back ups so it's quicker) so I can restore in case of a total OS failure. This might seem like overkill, but this way I would have everything backed up, but with the ability to pick and choose what I want to recover. And although it seems complicated, once set up and scheduled, it all works with very little thought on my part. I admit TC has many glitches, but I still love the wireless backup.

For all iPad owners with video freezing concerns- read this first!

First of all, take a deep breath, acknowledge that it is not your fault, and there is nothing you can do with the software to fix it. It is a hardware problem, most likely video chip related, that is ONLY solved with replacement. I have had several discussions with senior tech support who won't say exactly what the cause is, but admit that there is nothing a user can do to fix the problem other than replacement. Which they will happily provide. This is where it gets tricky.
If you are like me, you can't live a day without your iPad, even though you also have a smart phone, a net book and a laptop....if I can admit it, so can you. So if your local store has a brown box replacement for your model, go in and get it replaced, and you are done. Most of the time, this will fix the issue because they test these ones first. If you are like me and your store does not have a replacement for your wifi only model, then you have to either drop yours off and wait for a replacement to be shipped in 4-5 business days, or purchase apple care where they will hot swap a new iPad with you with overnight to your doorstep. This is the way to go and here is why: you can't be without your iPad and you won't be. AppleCare is $100 that is fully refundable at a pro rated time period. So you have it for 1 week and then cancel it. Cost of use? Should be about $2. And the experience is seamless. This is just my opinion, but it worked for me!

taffytafftaf,
Agreed; The problem might very well be a hardware one. After all, these symptoms are very weird. It's undoubtedly a great phone. The main reason I bought it was to have the first decent looking WCDMA phone out there (that works in Europe) and I still quite like it.
To tell you the truth though, I was going to replace it with a 8GB N91, until I tried one yesterday. It's way too bulky, actually the dimensions seem weird - nothing like my old 8850. The HDD explains everything, but I really don't need another DAP or a pocket drive, so it won't quite do.
I'll take your advice and take the 6630 to my nearest NSC. Hopefully they'll be able to revive it. If not, I'll replace it with something very small.
"Good luck"
Thanks, I'll need it!
mbamg,
I think it's a case of "what goes around, comes around". You've obviously taken good care of your phone, whereas I haven't. I definitely should've taken it to a NSC to be updated. These problems, as mentioned above, might also have something to do with the hardware, as the phone has taken some unintended abuse during the years. We'll just have to wait and see.
The original RS-MMC card was in the phone when it was updated. After that the phone claimed it was faulty. Other cards don't seem to work either. Unfortunately formatting them didn't help.
I still partially blame the NSU, since these problems didn't surface until the software was supposedly "successfully updated". My 6630 is a bad combo of possibly damaged hardware and new firmware.
Thanks once again for your input guys, I really appreciate it!
Current communication arsenal:
HTC P3600 / Nokia 6630 / Globalstar GSP-1700

Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

Hey guys,
I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
"Windows could not parse or process the unattend answer file for pass [specialize]."
So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
from the Windows 8 & Server 2012 unattend.xml files:
<IEWelcomeMsg>false</IEWelcomeMsg>
So I simply commented it out like so:
Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
Hope my time spent saves someone else some grief!

I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
~Adam

If you are JUST now signing up with your new iPhone Read this First!!

If you have not begun the activation process - Stop Read - and then Proceed.
Sign up for a new number when you activate!!!!
DON"T MOVE YOUR NUMBER OVER
If you are with AT&T - add an additional line
If you are with another carrier - Get a new number.
You can bring your old number over to the iPhone at a later date. The back log for activation is on bring in old numbers over - Not for new numbers.
So, if you want to wait in vain and ***** and moan and suffer like the rest of us - Say you want to bring your number over.
If you want to start playing with the coolest phone ever: Get a new Number, then deal with having your old number moved once the insane sign up frenzy dies down a bit in a few days.
I'm sure this activation problem will go away, once the frenzy is over.
My two bits.
enjoy your phone!
iMac 20" Intel core 2 Duo Mac OS X (10.4.9) 2GB RAM Installed

If you have not begun the activation process - Stop
Read - and then Proceed.
Sign up for a new number when you activate!!!!
DON"T MOVE YOUR NUMBER OVER
If you are with AT&T - add an additional line
If you are with another carrier - Get a new number.
You can bring your old number over to the iPhone at a
later date. The back log for activation is on bring
in old numbers over - Not for new numbers.
So, if you want to wait in vain and ***** and moan
and suffer like the rest of us - Say you want to
bring your number over.
If you want to start playing with the coolest phone
ever: Get a new Number, then deal with having your
old number moved once the insane sign up frenzy dies
down a bit in a few days.
I'm sure this activation problem will go away, once
the frenzy is over.
My two bits.
enjoy your phone!
iMac
20" Intel core 2 Duo Mac OS X (10.4.9)
2GB RAM Installed
Activation, selecting to move my existing AT&T number, worked fine. The whole process took barely 5 minutes to complete all within ITunes.

IPhone reception is poor (it's actually NOT AT&T).... Hope Apple Reads This

After using the iphone all I could think of was...."fewest dropped calls" my a--. I've never has so many dropped calls in my life since switching to the new iPhone.
Here are steps I've taken:
Verified that I'm in an excellent coverage area (with AT&T)
Swapped SIM - It was suggested online, and by Apple Support.
Swapped iPhone
Purchased Wi-Ex zBoost YX510 Dual band signal booster.
All to no avail.
I've determine it's not AT&T that is the problem it's the iPhone.
When the phone is sitting, I can get full signal, 4 bars. As soon as I pick up the phone...I get dropped calls, zero signal, no service, or maybe 1 bar (barely).
Even after doing all the aforementioned items, I still get loss of service. Clearly this is a problem with the iPhone, a search of the web shows TONS of people experiencing the same issue.
Not only that, but I contacted Wi-Ex the makers of zBoost which was HIGHLY rated by several reputable magazines etc...and they stated they have actually gotten a LARGE number of calls with respect to iPhone users having poor reception.
He pointed to transmit power as possibly being the culprit. I'm not a phone expert, I'm a Senior Systems Engineer, so not sure what that would have to do with anything. But he stated it used to be the old Motorola RAZR that they constantly got calls about and he verified that they definetly had the worst trasmit power out of any cell phone seen. Which is probably why so many people complain about the RAZR but now he states the iPhone calls are slowly taking over.
Even with the booster in my house, I reguarly get FULL signal 4 bars...but like I said...as soon as I touch the phone or make a call...it's all over.
I'm hoping this can be fixed through an iPhone update. I would hate to think I have to return the phone can cancel service, but I can't operate like this.
If Apple is watching, I'm willing to be a beta tester in anyway you see fit. I love the phone but I can't deal with all these great features but constant call dropping.

Hi Derrick,
Similar situation to you but..
I purchased yx500 cel single band (800 MHZ, that's the one iPhone uses at my location) actually 2 of them. Yeah I know alot of money to spend to get service at my house. But the 1st purchase was an absolute neccesity for my wife's iPhone. He phone is her ONLY phone for business and no service or 1 bar was not acceptable. The gain on the supplied base station omnidirectional antenna is only so so as the signal strength diminishes about 10 feet away from the base station. I tried the directional indoor base station antenna to get more distance from the base station, with no luck. So the 2nd purchase was another 500 cel for use in the other end of our downstairs, for me. 2 outdoor antennas on either end of the house.
The interesting part of this discussion is that my wife had Sprint previous to the iPhone and service was pretty much the same as it is now with ATT. Sprint's and ATT's towers are next to each other about 1 mile away, as the crow flies, from my house. I had and still have a Blackberry Pearl (now used as a backup phone just in case) and the service was the same as the iPhone. I had a friend over for dinner this weekend who just bought a Blackberry Curve (ATT) Same story with the service, 1 bar to no service. ATT's coverage map indicates (at street level) that we are in an excellent service area. I think our problem is that there are dense trees between us and the tower. Digital signals don't go through trees very well if at all.
For me and my wife the wi-ex product works although (and pertinent to your experience) occasionally the signal will drop inexplicably and dramatically.
On the road the iPhones work fine, and the very infrequent dropped calls are due to known (by me in my years of travelling) holes in the coverage area.
All of this stuff, unfortunately for people like us (at least for me), means that there are no definitive answers to the problem, and like you I have had to spend alot of money, and go through a long process of trial and error to maybe have an answer to the problem of service.
I'm traveling to Colorado, Denver in fact in a few weeks and will be very curious to see how service is there.
Will keep everyone posted.
CD3

Bug with Java WSDP1.3 Toolkit?

Hi
I used the Java WSDP1.3 toolkit to generate the stubs for the webservice
"http://www.xmethods.net/sd/2001/BabelFishService.wsdl". After creating the stubs , I deployed them in Tomcat 4.1 to test the methods of this service. The output (SOAPException) I am getting when testing this service is
" Error : java.rmi.RemoteException: Runtime exception; nested exception is: unexpected element type: expected={http://www.w3.org/2001/XMLSchema}QName, actual={http://www.w3.org/2001/XMLSchema}string"
Then I used the Axis 1.1 toolkit to generate stubs for the same service and deployed the stubs in tomcat 4.1. The output (SOAPException) I am getting when testing this service is
"Error : Our connection to the Altavista BabelFish site has been cut. This service will remain down indefinitely until an alternate translation engine can be found. We apologize for any inconvenience."
I got the same exception as axis when tested the service with XMLSPY.
Why JAVA WSDP1.3 is not capturing the correcting SOAP Exception?. Is it a bug in the Java WSDP1.3 SOAP toolkit?

Any answers for the query. I face a similar bug with the same versions.

Issues with updating my NOKIA 5800 XM

Hi all,
I don't know, whether this topic has been already covered, but I haven't found anything suitable for me. Here's the problem. I have a NOKIA 5800 XM and I want to update its' firmware to v30.0.011. However the standard procedure to update it using my phone did not succeed - while checking for the new update, an error appears, saying "Connection error" (i am using OMNITEL Lithuania). However, the last time I was updating my Nokia, everything was ok doing it this way. The other point is, I have a MAC, and when i tried to update using Nokia Software update using my friend's PC, i did not succeed - there were errors as well. So, can anyone help me with this?
Thanks in advance

I have a similar problem. My 5800's clock is very slow. It falls behind by maybe up to 3 hours per day. I have to continually correct the time all day. Today I was correcting the time when the phone gave me an error message and I lost all of my videos and photos. Luckily my contacts and messages were not lost. I was hoping a Firmware update would solve the bugs with this very frustrating phone. No luck. I installed the Nokia PC Suite and the Updater doesn't work. I always get an error message and whatever Internet Explorer wants to open fails. I then loaded Nokia Software Updater and continually get a disconnection error message. I've been trying all afternoon. This website is very slow and frustrating as well. After having been a Nokia user for many, many, many years. I can't help but be unbelievably disappointed with my new phone. If anyone can help with the Firmware Update issue. It would be much appreciated. Thanks.

Update for Nokia 5530? Read this please.

Hi all!
I bought my (first) Nokia smartphone in January this year: Nokia 5530.
Since then, no updates was released for my device.
Nokia forget 5530 as like 5800. Now only C / E series, N8, N9, and low-price like 52xx.
Recently new update was released for C6, 5230 and 5233 devices with Ovi Maps 3.06, Browser 7.3 Anna-like, Emoticons input, general improves and more.
Now, my Nokia 5530 is very poor and forgeted:
Don't have widgets, don't support IM for Nokia (i tested it and loved), Nokia Browser is terrible, and others resource is very obsolete.
I saw the C6, the images/videos viewer is very much better, you can categorize with folders, favorite photos, and music player now support lyrics.
Days ago I installed a C6 port to 5530 (I transformed my 5530 in C6), and now my device has widgets, IM for Nokia and all i mentioned in here, but in very lag, the "Memory is full, close some apps and try again" message appears all time, much bored. Then I back yesterday to original firmware 32.0.0.7. I also have put in ALL MUSICS (300+) image covers and lyrics to use in cfw, but now in original don't have this, and I much sad.
What I want?
Want that Nokia don't forget users, because my first smartphone made my a Nokia lover, and I liking this. But i don't have money to buy a new smartphone (i want N8) because here in Brazil (where I live) is much expensive price.
Well, please Nokia, release a nice update for us Nokia 5530 users, even if not with widgets support, but with IM for Nokia, new browser/Ovi maps, lyrics support in Music Player, More organized images/videos viewer and more stabilities and improvements in cinetic scroll, etc.
I love Nokia and want to continue loving.
Thank you very much, I'm anxious waiting for my device update.
Cheers,
Destroyzer (@destroyzer).

The 5530 is an older device than the C6. The 5800 wasnt exactly forgotten, but its normal for nokia phones to lose updates once the unit is about a year and a half to two years old. The 5530 is almost two years old already (it will turn two this august), so its not unusual that it wont receive updates anymore.
Its not exactly Nokia's fault that you bought an outdated phone.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Has anyone else noticed this bug with multitasking gestures on iOS 5?

I recently updated my iPad 2 to iOS 5 and have just noticed this bug with multitasking gestures.
If you're currently in an app and use the four-finger swipe up to open the app switcher, and then subsequently close another app that's open in the background from the switcher, the app doesn't seem to fully close. What I mean is that if you now use the four-finger swipe right/left to switch apps, when you get to the place where that app you closed was, it's still open, and after you view it, it pops back into the app switcher. It seems like the multitasking gestures feature isn't recognizing that you've closed the app and that it should skip it from now on.
If you do the above steps again, but this time after you close the app from the switcher, use the five-finger pinch to go back to the home screen, it seems to clear the "cache" being used by the the gestures feature. Now if you go back into any app and swipe left to right, the closed app won't load up anymore (which is how it should correctly work).
Has anyone else noticed this, or can anyone else reproduce the bug as I described? I'd appreciate it if an Apple employee could confirm that this is a bug in iOS 5 and not just something wrong on my end. Thanks in advance.

02-May-200702:03 PM
scoobyman wrote:
Hi keffa
After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
http://www.nokia.co.uk/A4222231
This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
Useful links: Phone firmware update | Nokia support site

Autorotate bug with 5800 - hope Nokia reads this.

Similar Messages

Maybe you are looking for