Autoscale in waveform view does not scale down

Since, again, this follow-up question in another thread has not been answered, I will post it as a new thread here.
The autoscaling in the waveform viewer does not seem to be working as one expects.
When I switch to analog view the first time, it scales fine to the actual range of the signal.
Once the signal exceeds the scale, it will rescale. But if the signal is within a smaller interval again after retriggering, it will not scale back.
Hence, the autoscale seems to work only in one direction.
I tried
1) switching back to digital and then analog again - no rescaling
2) Analog setting, toggle between auto and fixed - no rescaling
3) trigger the signal again - no rescaling
The only thing that helps is to restart the software, or to remove and add the probes again (which is very annoying, if one considers my other question here... Probes in Waveform View added twice
How can this be solved?
Best regards
Johannes

I had been chasing this for months, along side another issue with the Mixed Signal Graph.
Here's a side by side comparison of the problem. I also believe that in 8.6, if you send the Mixed Signal Graph a null array, it will break horribly, to the point that you have to delete it and read from the pallet again. (Waveform attributes become corrupt among other things) I am unable to replicate in 2009 so I think it's fixed.
Attached is an example of the 'loose fit drift' issue.
Reece
Attachments:
Mixed Signal Errors.vi ‏40 KB

Similar Messages

Main content text does not scale down on iPhone

Hello my Dreamweaver friends,
I'm working on a site for a friend -- a simple fixed width layout (header, footer, sidebar and main content). It looks good on Safari and Firefox. But on the iPhone and iTouch the text in the mainContent area does not scale down to size with the <h> tags and the links on the Spry navigation bar. Is there a reason for that? Is there something I could do so that it all scales down?
Another problem is that the right border I put on the Spry Navigation menu doesn't appear on my version of Internet Explorer.
The link to the page, for what its worth, is http://www.daveharrison.info/tzs/index.html
Thanks for any help!

12 tips for iPhone Web Design
http://articles.sitepoint.com/article/iphone-development-12-tips
Also see this working Demo with media queries. Resize your non-IE browser viewport and see what happens.
http://alt-web.com/TEMPLATES/CSS-centered-round-boxes.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Database startup showing ORA-00942: table or view does not exist in trace

Hi Friends,
SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
Oracle 10.2.0.1.0
While I am doing a startup, getting following error.
SQL> startup;
ORACLE instance started.
Total System Global Area 3221225472 bytes
Fixed Size 2122544 bytes
Variable Size 410819792 bytes
Database Buffers 2801795072 bytes
Redo Buffers 6488064 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
ORA-00942: table or view does not exist
Error 942 happened during db open, shutting down database
USER: terminating instance due to error 942
Instance terminated by USER, pid = 11486
ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
/applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /applns/oracle
System name: SunOS
Node name: N890
Release: 5.10
Version: Generic_137112-06
Machine: i86pc
Instance name: CTSD1
Redo thread mounted by this instance: 1
Oracle process number: 23
Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
*** SERVICE NAME:() 2011-02-16 19:24:50.188
*** SESSION ID:(325.3) 2011-02-16 19:24:50.188
Successfully allocated 3 recovery slaves
Using 367 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
>on-disk rba: logseq 45929, block 52, scn 310788832
>start recovery at logseq 45929, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
Total physical reads: 4096Kb
Longest record: 0Kb, moves: 0/61 (0%)
Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
Last redo scn: 0x0000.128642df (310788831)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 117/121 = 1.0
*** 2011-02-16 19:24:50.515
KCRA: start recovery claims for 4 data blocks
*** 2011-02-16 19:24:50.515
KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
*** 2011-02-16 19:24:50.516
Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 121/121 = 1.0
ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
Any help is appreciated
Thanks
SSN

Hi,
Thanks.
Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
select group#,status from v$log;
    GROUP# STATUS
         1 INACTIVE
         3 INACTIVE
         2 CURRENT
SQL> select group#,MEMBER from v$logfile where group#=2;
    GROUP#
MEMBER
         2
/applns/oracle/oradata/CTSD1/redo02.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=1;
    GROUP#
MEMBER
         1
/applns/oracle/oradata/CTSD1/redo01.log
         1
/applns/oracle/oradata/CTSD1/redolog001.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=3
    GROUP#
MEMBER
         3
/applns/oracle/oradata/CTSD1/redo03.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
         0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.SSN

A newbie problem - Why 'ORA-00942: table or view does not exist'

Hi,
I am a newbie having a very basic problem.
I have just created a table by reading in a CSV file.
However when I try to SELECT from it, I get an error message saying :-
ORA-00942: table or view does not exist
How can this be when I can see the table name ?
I have tried a couple of things that I found in the Discussion Forum, like 'ALTER SCHEMA' and 'GRANT SELECT'.
Neither seemed sensible because I have just created a table, and sure enough, neither helped.
It's disappointing that something so basic can go wrong.
I will be very grateful for any advice.
Barry

This tool and forum is awesome. I'm a developer that was never touched HTMLDB and now with in a month I'm developing applications quickly and when I have a question I have this active forum to ask my sometimes stupid and othertimes valid questions! This is great! I don't know where you all find the time to help out so much!
It is a little addicting though... I find myself sitting down Saturday morning just to spend a couple of minutes reading the posts and next thing I know hours have gone by as I use what I read because I can't wait until Monday...
Thank you all for everything!!!! HTMLDB, APEX, Javascript and now in another post I'm learning about "Fine Grained Access Control" or "Virtual Private Database".
Enjoy, BillC :>)

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

Premiere elements 11 - project assets menu does not pull down - I can't see what media I have added.

HI, When I press the arrow for projects assets, I cannot see any assets. Actually, I cannot seem to add any via the add Media option in the expert view, but, if I use the quick view I can drag and drop. Please help. While I hope it is something simple, I am willing to reinstall or upgrade. Please advise. Thanks!!!!

swope1
What computer operating system is your Premiere Elements 11 running on?
Does the problem exist with and without the antivirus and firewall(s) disabled?
I would not move to Premiere Elements 12 or 13 just yet.
How long have you been working with the program without the problem from the day of purchase until now?
Are you saying that you cannot use Add Media (click on triangle and list does not drop down) as well as use
Project Assets (will not open)? If both is the case, I would encourage you to do
a. Deactivate the program in an opened project's Help Menu/Update - then close out of there.
b. Uninstall the program using the usual Control Panel way
c. Do a free ccleaner run through (regular and registry cleaner parts)
CCleaner - Download
d. Reinstall the program with antivirus and firewall(s) disabled.
Please let us know the results. Then we can decide what next.
Thank you.
ATR

Macbook does not shut down or restart. It stops at an blank white screen with the cursor moving around it. Updated to the latest software

I have a Macbook Air 13.3" 2012 model. For a couple of days my Macbook does not shuts down. It just stops at a blank white screen with the cursor still hovering around it. I have to shut it down forcefully every time using the power button.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Table or view does not exist when using in PL/SQL block

I hav something strange...
When i execute a query it works just fine... When i use the exact same query in a function i want to create, i get the error 'table or view does not exist'
I create the function with the same user then when i'm executing the query.
For example:
select name,userid from portal.WWLOG_ACTIVITY_LOGS
if i execute this... it works fine. I get my results.
However when i create a function:
CREATE OR REPLACE FUNCTION EBUSINESS.GET_USER_CREATOR (p_userid IN Varchar2) return VARCHAR2
as
/*CURSOR c_user_creator IS
select distinct name,userid from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;*/
v_creator varchar2(500);
v_ret_val VARCHAR2(500) := 'NOT_FOUND';
BEGIN
select userid into v_ret_val from portal.WWLOG_ACTIVITY_LOGS
where sub_domain = 'user' and action = 'create'
and name = p_userid;
--v_ret_val := x.userid;
--end loop;
-- Is the user in the group or not?
/*OPEN c_user_creator;
FETCH c_user_creator INTO v_creator;
IF c_user_creator%FOUND THEN
v_ret_val := v_creator;
ELSE
v_ret_val := 'NOT FOUND';
END IF;
CLOSE c_user_creator;*/
Return v_ret_val;
END;
The table or view does not exist...
I tryed with cursor, select into, for x in (select....)
Nothing works.
A select grant is a select grant right? Are there different grant you should use so you can select it into a function or just do a normal select?
I also tryed to create a view that just sais select * from WWLOG_ACTIVITY_LOGS but that doesn't work...

Are there different grant you should use so you can
select it into a function or just do a normal select? Yes. Grants on objects used in functions/procedures must be given directly to the user, and not through a role.

Table or view does not exist - Data Dictionary Import Wizard(Data Modeler)

Hi All,
In Data Modeler, Data Dictionary Import Wizard, I'm able to connect to database.But while going to the second stage (Select Schema/Database), I'm getting an error "ORA-00942: table or view does not exist".
I am able to select the table with select * from all_tables and I can open many tables as well.
Could anyone tell me, whether I'm missing any privilege, that causing this error.
Thanks in advance for you support.
Thanks.

Hi,
Thanks for your response, sorry for my late reply as I was away from my place.
Yes, it is showing "Connection established successfully".
log file as below-
2012-08-02 10:37:26,471 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler 3.1.1.703
2012-08-02 10:39:42,889 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
Pls see oracle version details-
Oracle Database 11g Enterprise Edition
11.1.0.6.0
64bit Production
Thanks again and waiting for reply.

Error in pakcage table or view does not exist but on sql prompt query works

Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
The below package compiled in system user and trying to query on view v$session_wait however getting below error.
PACKAGE BODY SYSTEM.PK_DB_ALERT
On line: 212
PL/SQL: ORA-00942: table or view does not exist
I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
SELECT SID, seq#, event, wait_time
FROM v$session_wait
WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
ORDER BY 2

SDD wrote:
Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
SY.
Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

APEX_APPLICATION_FILES: ORA-00942: table or view does not exist

Hello,
As my first APEX task I am attempting the upload/download demo on http://download.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm
The ultimate goal is to store PDF files in the database.
In order to complete step 1: To create an application using the Create Application Wizard:
- I first created a user from SYSTEM called 'myapp'
- Next I logged into 'myapp' to continue the exercise. (I am wondering if that is where I am going wrong... If so, please clarify)
- Knowing that I would want to save the upload to a table I created a table with a BLOB
I did the steps for the upload and ran the application - no errors to there.
Next I needed to "To create a report on APEX_APPLICATION_FILES:".
I started the wizard as instructed. When I pasted the SELECT ... FROM APEX_APPLICATION_FILES, I got the table or view does not exist. A quick review of the TABLES tab shows only the tables that I created. Not any of the system tables or views.
I logged back in as SYSTEM and reviewed the 'rights' given the user 'myapp'. All were checked.
I knew nothing of Oracle when I installed XE, so I took defaults or whatever the install doc said to do. Is that part of the problem? It is clear that I do not have rights to see that table, but I also do not see the table when logged in as SYSTEM.
Any insight appreciated,
Rick

Thanks for the reply.
Version is:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database
NAME     XE
CREATED     10/13/2006 08:04:21 PM
RESETLOGS_TIME     10/13/2006 08:04:25 PM
Install Version 10.2.1015
Regarding the code links, this one looks like what I need:
DECLARE
l_bfile BFILE;
l_blob BLOB;
BEGIN
INSERT INTO tab1 (col1)
VALUES (empty_blob())
RETURN col1 INTO l_blob;
l_bfile := BFILENAME('IMAGES', 'MyImage.gif');
DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
COMMIT;
END;
Is the 'BFILENAME' function that causes the 'get a filename' dialog box of Windows to open for the user to find which file to upload?
I'm going off to look for a newer version of APEX, thanks.

ORA-00942: table or view does not exist

select
                    nvl(appr.APPROVER_NAME, org.APPROVER_NAME) as APPROVER_NAME,
                    nvl(appr.APPROVER, org.APPROVER) as APPROVER,
                    nvl(appr.APPROVER_TYPE, org.APPROVER_TYPE) as APPROVER_TYPE,
                    nvl(appr.ASSIGNED_DATE, org.ASSIGNED_DATE) as ASSIGNED_DATE,
                    nvl(appr.APPROVAL_DATE, '-') as APPROVAL_DATE,
                    nvl(appr.STATE, org.STATE) as STATE,
                                org.SEQ as numberoftimesmodified,
                    nvl(appr.PROCESS, org.PROCESS) as PROCESS,
                    appr.seq2
                    from (
                         select a.seq,
                         b.usr_display_name as APPROVER_NAME,
                         b.usr_login as APPROVER,
                         'User' as APPROVER_TYPE,
                         '-' as ASSIGNED_DATE,
                         '-' as STATE,
                         a.seq as numberoftimesmodified,
                         '-' as PROCESS
                         from(
                              SELECT 1 as seq, USR_UDF_MANAGER_LOGIN as GID, '' as approver_name, 'user' as approver_type FROM DEVT_OIM.USR WHERE USR_LOGIN =:BENEFICIARY_GID AND :APPLICATION = 'Oracle 11i On demand'
                              UNION
                              select rownum as seq, regexp_substr(:APPROVERPAYLOAD,'[^,]+', 1, level) as gid, '' as approver_name, 'user' as approver_type from dual
                              where :APPLICATION != 'Oracle 11i On demand'
                              connect by regexp_substr(:APPROVERPAYLOAD, '[^,]+', 1, level) is not null
                         ) a
                         inner join DEVT_OIM.usr b on a.gid = b.usr_login
                    ) org
                    left join(
                         select b.numberoftimesmodified as seq, rownum as seq2, a.*
                         from
                              select
                              LEAD(a.ASSIGNEES) OVER(ORDER BY a.numberoftimesmodified) as prev_gid,
                              LEAD(a.pushbacksequence) OVER(ORDER BY a.numberoftimesmodified) as prev_pushbacksequence,
                              a.ASSIGNEES as current_gid,
                              nvl(retrieveGidName(a.ASSIGNEES), '-') as APPROVER_NAME,
                              (DEVT_OIM.TOKNEW(REPLACE(a.ASSIGNEES, ',', ':'))) as APPROVER,
                              'User' as APPROVER_TYPE,
                              a.pushbacksequence,
                              TO_CHAR(a.assigneddate,'DD-Mon-YYYY HH:MI:SS AM') as ASSIGNED_DATE,
                              case when a.state = 'WITHDRAWN' then TO_CHAR(a.updateddate,'DD-Mon-YYYY HH:MI:SS AM') else TO_CHAR(d.updateddate,'DD-Mon-YYYY HH:MI:SS AM') end as APPROVAL_DATE,
                              a.numberoftimesmodified,
                              case when a.state = 'EXPIRED' then 'Expired' when a.approvalduration is null then 'Pending' when a.outcome = 'REJECT' then 'Rejected' else 'Approved' end as PROCESS,
                              d.state as process2,
                              case when d.substate = 'REASSIGNED' then 'Reassigned' when d.state = 'INFO_REQUESTED' then 'Request Info' when a.state = 'EXPIRED' then 'Expired'
                                   when a.outcome = 'REJECT' then 'Rejected' when d.substate = 'INFO_SUBMITTED' then 'Submitted' when a.state = 'WITHDRAWN' then 'Withdrawn' when e.state is null then 'Pending' else 'Approved' end as state,
                              e.ASSIGNEES, d.substate
                              from WFTASKHISTORY a
                              left join WFTASKHISTORY d on d.IDENTIFICATIONKEY = a.IDENTIFICATIONKEY and d.numberoftimesmodified = (a.numberoftimesmodified+1)
                              left join WFTASKHISTORY e on e.IDENTIFICATIONKEY = a.IDENTIFICATIONKEY and e.numberoftimesmodified = (a.numberoftimesmodified-1) and e.ASSIGNEES = a.ASSIGNEES
                              where a.IDENTIFICATIONKEY = :IDENTIFICATIONKEY and a.state is not null
                              order by a.numberoftimesmodified
                         ) a
                         inner join (select rownum as numberoftimesmodified, pushbacksequence from (select distinct pushbacksequence from WFTASKHISTORY a where a.IDENTIFICATIONKEY = :IDENTIFICATIONKEY order by pushbacksequence)) b
                         on b.pushbacksequence = a.pushbacksequence
                         where a.prev_gid != a.current_gid or prev_gid is null
                         order by a.numberoftimesmodified
                    ) appr on org.seq = appr.seqORA-00942: table or view does not exist
00942. 00000 - "table or view does not exist"
*Cause:
*Action:
Error at Line: 55 Column: 172

Hi User,
The ORA - 00942 indicates that the Underlying object is not present in the Database.
Just Check whether the Table you are used in the Select statement exists in the user/Schema.
To check this..
SELECT *
FROM USER_TABLES
WHERE TABLE_NAME = 'YOUR_TABLE_NAME';Or
Simply,
SELECT *
FROM TAB;If you are using the Table from other Schema, Just give the table name like this..
SELECT *
FROM SCHEMA_USER.table_name;Thanks,
Shankar

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

PL/SQL: ORA-00942: table or view does not exist

Hi
i have logged into my schema and trying to access the database "DAD" which has the table name "SCHOOL"
i wrote a function which should give me new_sno when i give it the old_sno
and i have this errors , pls help
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
NEW_SNO Number:=0;
BEGIN
SELECT new_sno AS NEW_SNO
FROM DAD.SCHOOL
WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN NEW_SNO;
END ORIG_SN;
Warning: Function created with compilation errors.
Errors for FUNCTION ORIG_SN:
LINE/COL ERROR
5/1 PL/SQL: SQL Statement ignored
6/15 PL/SQL: ORA-00942: table or view does not exist
Thanks in advance ..

Try this,
CREATE VIEW SCHOOL_VIEW AS SELECT * FROM DAD.SCHOOL;and then change your function like
CREATE OR REPLACE FUNCTION ORIG_SN(OSNO in Number,OTN in Number)
RETURN Number IS
my_new_sno Number:=0;
BEGIN
SELECT new_sno INTO my_new_sno FROM SCHOOL_VIEW WHERE ORIG_SNO = OSNO AND ORIG_TN = OTN;
RETURN my_new_sno;
END ORIG_SN;and see if it is getting created without any errors.
-Arun
Edited by: Arunkumar Ramamoorthy on Aug 15, 2009 1:56 AM

Autoscale in waveform view does not scale down

Similar Messages

Maybe you are looking for