Avail service tax and its Eces,SECESS?

hii all,
Can some body explain me about the service tax scenrio with ecess and secess.
how to avail the service tax ,ecess on service tax and secess on service tax.
Explaination in detailed way is appreciable.
thanks

Service tax
Background: As per legal requirement, service tax credit can be only availed on the payment to the vendor either full or partial payment.
In the case of sales, service tax is liable to pay to government only on the receipt of sales proceeds for services.
The Approach adopted here is that while booking the liability, Service tax amount will be kept in a u201Ctransit u201Caccount (e.g. service tax on hold Account). Periodically a program will be run which will transfer the Amount from: u201Con Holdu201D account to Service Tax Receivable Account.
Mapping of above scenario in the SAP environment using following SAP Notes
921634 Service tax India: Transfer from Interim to Final Account
For ERP 6.0 use additional notes 1073292, 1073447 & 1076653.
Support Pack level: 10
Please check that notes 785561 and 817486 are implemented in your system or an appropriate SP is installed.
u will get the details in SAP note 921634
and for credit
when u do J2IUN
on the first screen down u will have to put
service tax final gl account
ecess of final st gl account
hecess on ST final Gl account
hope this helps

Similar Messages

Service tax and cess on freight for inventorised items

Hi all,
There is a scenario where service tax and cess is charged on freight line items in a PO for inventorised material. This had been incorporated in pricing procedure accordingly. But while doing a MIGO it is found that the service tax and cess are charged on the materials. This should not be charged to the material rather at the time of MIRO it has to be posted to a receivable account.
Can anyone suggest what configuration is required for this.
thanks in advance
asbin

Hi Ponraj,
i would like to know the solution in detailed. As Per my client requirement, i have separated VAT amount and posting into separated G/L account. but my problem is i have to pay tax on freight amount to government. The taxes on the freight will be different. since 25% from the freight amount is taxable. so 25% from the freight amount i have to consider and on that i have to charge 2% E.Cess and 1% secondary higher E.cess.
how could i configure this issue in SAP?
please help me on this issue.
regards
Appu

SD: Service tax and sales tax

Dear All
My client has 3 plants in different states and in to erection activities. while configuring the service tax and sales tax i have created single G/L accounts for the service tax and sales tax based on tax code.
Now my client is asking how can check the service tax payable and sales tax payable as per plant basis.
With my config all service tax will go to one G/L account , VAT will go to one account . how can we able check plant wise details.
Suggest me the way
Regards
Satya

Hello
As per my experience, the GL Acc for Service Tax & VAT can't be same. Check with your client.
Anyways, as per your requirement for VAT
1. Maintain 3 Tax code corresponding to your Plant. This will help you in different Tax Code differnet GL Acc
Say,
V1 - Output TaxCode AP
V2 - Output TaxCode KA
V3 - Output TaxCode TN
2. In Tcode OB40 - in Rules activate Tax code. By doing this, it will activate TAX CODE & ACCOUNT in account section.
With you can maintain,
V1 - 3888001
V2 - 3888002
V3 - 3888003
3. Maintain access sequence Country/Plant/PlntRegion/TaxCl1Cust/TaxCl1Mat. in Tax Condition Type.
Then maintain condition record (VK11) for your VAT.
Say,
Country - Plant- PlntRegion - TaxCl1Cust - TaxCl1Mat.
IN - 3010 - AP - 01 - 01 - 4 % - V1
IN - 3020 - KA - 01 - 01 - 4 % - V2
IN - 3030 - TN - 01 - 01 - 4 % - V3
Similarly, you can do for Service tax also.
Thanks & Regards
JP

Service Tax and credit

Hi Experts,
Please Clear my confusion regarding the below points.....
1. Previousy based on the vendor payment we are doing the transfer from interim GL to Target GL account., Now rules have benn changed, we can use based on accrual(Irrespective of payemnt we can use 100% amount), in this case also need to create target GL accounts?
2.Please can u tell me in which trasaction code we mention tthe GL accountS( Which are Target GL accounts, whenever we run the Utilisation T.CODE: J2IUN/J2IU......PLS TELL ME THE PATH OR T.CODE..WHERE WE MENTION GL ACCOUNTS RELATED TO UTILISATION.
Please clear my confusion....
Thanks
Chandu

Hi,
For service tax , check link:
Service tax
AND
For service tax utilization, check link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Regards,
Biju K

Diference between Service tax and GTA service tax

Hi,
Kindly tell me what is the difference between service tax and GTA service tax and their accounting entries in SAP ?
With Regards,
Samrat

Hi,
Service Tax is charged by the service vendor and you pay the service tax to the vendor along with his payment. Once you pay the service tax, it is the liability of the vendor to pay the service tax amount collected from you to the Government.
GTA is Goods Transport Authority. When you receive any service from any transport vendor, he will not charge service tax from you though it attracts service tax. It is your liability to pay the service tax to Government for the services received from the transport vendor.
In case of normal service tax it is treated as input tax and credit for the same is taken (similar to excise). But, in case of GTA you have to create the liability at the time of receiving the service and make the payment directly to the Government.
Regards
Ramakrishna

Service Tax and Sales Tax-India

In SAP how we can enter both Service Tax and Sales tax in single invoice. Is there is any option to enter both tax code in a single invoice?

Hi
For certain type of Vendor Invoices, both service tax and VAT is applicable in India. This can be done with the help of your tax procedure, where in you calculate service tax on Base Amount and VAT on the BASE AMOUNT plus Excise, if applicable. You need to create a single tax code like that and maintain the suitable condition records. I guess the standard TAX PROCEDURE TAXINN also takes care of this requirement.
Regards
Sanil

Service tax and Vat

Dear Expert
How did I can put service tax and vat in same PO line item.?
Pl suggest.
Thanks
Mayur

Hi,
1) Create one condition type ZWOR as Work Contract Tax(WCT) for VAT.
2) Create Service tax 10.3% (10,2,1) condition type as follows.
    a) Condition Type - JSVD for 10%
    b) Condition Type - JEC3 for 2 %
    c) Condition Type - JSE1 for 1 %
Using T-code FTXP - Maintain Tax code create service tax code and assign the above condition for the that service tax code.
PO creation time, you are using the above created service tax code with combination of VAT & service tax code and then posting time based on condition type vat and service tax value posted to separate GL.
Hope, it is useful for you.
Regards,
K.Rajendran

Purchase Order with Service Tax and Sales Tax both

Dear Sir,
We have a scenario where we have to make a Purchase Order for buying some Software . In the PO , we need to mention Service-Tax as well as Sales-Tax both . Pl guide us as whether it is possible to have such condition available in SAP , if yes then what procedure need to be followed .
As at present , we can not charge Service Tax in the PO against the Material Purchase . Service Tax can be charged only against the Services being purchased .
Pl guide us .
With Thanks and Regards
B Mittal

Hi
If you are talking about a MM pricing procedure create two condition types by copying a standard ( take RAOO and then change the Plus/minus to " Positive" there by u can include this in your PO print as well.
regards
Mahesh

Last Year available Service Tax Credit not appearing in J2IUN

While doing CENVAT Utilization thru J2IUN, Last year service tax available Credit balance is not appearing, Only Current year balances are appearing.
Example: Opening in service tax credit account:      1,50,000.00
        Current year Transactions:            3,00,000.00
                  Total               :      4,50,000.00
While doing J2IUN Utilization, system is showing available balance as 3,00,000 instead of 4,50,000.
I am looking forward for your earlier response.
Thanks in advance.

Hi,
Please check the G/L account (FS00) whether it is "Profit & Loss Account" or "Balance sheet account". If it is P&L account, the balances of last year won't be coming. Please check with FICO consultants.
Regards
G S Prasad

Service Tax and Business place configuration..

HI Experts,
I have one confusion, please clear and suggest the below issue..
My client having 3 plants, he wants to collect service tax in diferent GL accounts for plant wise with same tax code.
I think it is possible through business place concept? Please clear it is possible or not?
I have defined business place and assign business place to plant and compay code...what is the next step to follw please breif me about the scenario...
Please suggest.
Chandu

Thank you Vivek....
I am following the below way...
I have created Business place and assigned to company code and plant...
I have created one tax code and not assigned any GL accounts in OB40 AND i have assign GL accounts IN SM30...J_1IT030K_V IN THE combination of Account key, business place and GL.....but i am not getting any GL acounts in OB40 and FTXP in both cases my GL field is null....while posting the transaction system giving the below erro
Transaction key VS7 chart of accts ASHI not defined in table T030K
I have maintained the combination in SM30..it is not sufficeinet or any activation required....Please guide me...
Thanks
Chandu

Service order and its use...

Hello Experts,
Can anybody explain me what is service order and sevice quotation and billing is done for it.In what scenario it is in use ??
Please send me some links and documents on that topic and transaction codes also...
Will be very greatfull if get some early reply..
Thanks and Regards

Check [this|http://help.sap.com/erp2005_ehp_03/helpdata/EN/50/74d5f1a72111d3a6c40060087a7a74/frameset.htm]

How to find the Service order and its status..

Hello,
How see the status of the service order...
i have to search for all the service orders where all of them completed once....
which tables, fields are useful.
Please help to solve this issue.
thanks for yoru cooperation

Hello Gun,
How to see the status desciption for example
I1005
I1004
I1002...etc
waht I1005 means. I have to display status of each service order in the list , here i can not display I1005 is the status, instad i have to diplay I1005's desciption.

New Tax Code Creation with CST and Service Tax

Hi
I want to know the complete procedure of new tax code creation with CST and Service Tax. I want to know the steps for calculation of % of that Tax Code.
Kindly help me out.
Thanks
Kshipra G

Hi Expert,
Before creating a Tax Code, Create two Condition Types(T-Code: OBYZ) for CST and Service Tax, which need to Select the below Items
Cond. class - D - Taxes
Calculat.type - A - Percentage
Cond.category - D - Tax
and while creating a Tax Procedure just select the Condition Type of CST and Service Tax and provide the Account Key for both Condition Types.
Assign the GL Accounts to the Account Keys in T-Code: OB40.
Create a Tax Code in T-Code: FTXP, which is to be assigned in T-Code: FV11.
Maintain the percentage in T-Code: FV11, with your Key Combination and
Try this procedure, which will help you...
Regards,
GK
SAP

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

How to determine Service Tax in sales order

Dear Guru's
What all the configuration setting that are required for determine the Service Tax in the sales order for service Item we are using Tax procedure for India u2013 TAXINN.
Regards,
Bhanu

Following SAP Notes to be referred for Service Tax:
1. 778976 u2013 Service Tax and Ecess on Service Tax
2. 1032265 - SEcess on Service Tax
Regards
AK

Avail service tax and its Eces,SECESS?

Similar Messages

Maybe you are looking for