Available OLAP connection list not showing in Query browser

Hi all,
Hope everyone is doing great. I tried using query browser to consume BEx queries in dashboard. But I am not able to see the available connection list after choosing BEx query as my source in query browser. Attaching a screenshot of the same.
Request your assistance in solving the issue. Am i missing any settings ? Please help
Many thanks in advane,
Nikhil Joy

Hi Nikhil,
Are you able to see the list of universes (Unx)?
Also you could check the following
1. Logon to Central Management Console (CMC).
2. Go to Applications.
3. Now double click on Web Service and go to Properties.
4. Update the Access URL as mentioned below and click on Save & Close:
http://<WebServer>:8080/dswsbobje
Confirm if this URL is accessible in the browser.
5. Launch Dashboard Design, open Query Browser, click on Add Query and enter BusinessObjects Enterprise logon credentials.
Regards,
Noopur

Similar Messages

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

Goods movement list not showing EAN in Order Unit..!

Hi Guys,
I have an issue with goods movment list (tcode MB26).
good movement list not showing EAN in Order Unit..!
EAN No. and Storage Bin is maintained in Material Master but its not showing up Goods Movement list.
Please find the screen shots.
Thanks
Sam

are you still in 46c release? for 46c exists an OSS note to fix the issue with the bin:202240 - Transaction MB26: Storage bin is not supplied

Contact choice list not showing up on dial screen

I have a large contact list in the address book and today the contact choice list not showing up on the dial screen when I press the first one or two letter of the contact name, for example, there are 2 contact in my address book, John Smith and John Joe, when I press "john", BB will filter the address list and show up 2 contacts above in the choice list, but it stop working today, any ideas? thank you.

Never mind! If anyone else has this issue.... After trying numerous things , I simply turned iMessages off on ipad, restarted ipad and logged back in.

Transparent pop up list not showing?

Transparent pop up list not showing ?

This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
Just check if your business role is properly configured. Thats all i can say.
Regards
Kavindra

My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Ipod Classic connected but not showing in Itunes under Devices

I know this is similar to a few of the other issues that are described, if anyone can offer a link to another thread where the resolution is posted, that would be great, thanks!
I plug my ipod into my computer, I get a windows message saying some files may be damaged, Itunes actually automatically loads up but my Ipod is not shown in the Devices list in Itunes
I have been wracking my brain over this!
I have uninstalled/reinstalled Itunes 3 times, have reset my ipod manually (& now have no music on it at all!) have put the Ipod into disk mode, have taken it out of disk mode. On my laptop I've gone into Services - stopped/then started the Apple Device. I've removed the Apple Mobile Device USB Driver & reinstalled all to no avail! It still wont show up in Itunes!
Just to clarify;
- My laptop CAN see my ipod in its list of devices under My computer
- When I connect the Ipod, I get a window message from Windows saying some files may be damaged & it suggests running a scan.
- Itunes will start up when i plug in my IPOD, however
- My IPOD will not show up in the list of devices in Itunes
Another thing, I have 120GB ipod when I did a restore it deleted all the music but it is telling me that i only have 111GB memory available?!?!
After reading through the forums I did see someone state somewhere that you can restore your Ipod from Windows but I can't find the link that gives a list of instructions on how to do this.
Any help is greatly appreciated!
thanks

Hello there,
And welcome to Apple Discussions!
Regarding the error message about needing to scan and fix your iPod, see this article and follow the provided instructions to prevent the error message from reappearing. It may also resolve your "iPod missing in iTunes" issue as well.
http://www.futureofrealestatetechnology.com/general-real-estate-technology/resol ve-vista-scan-and-fix-error-when-plugging-in-ipod-or-other-devices/
Yes you can use the tools provided by Windows to reformat your iPod. Just make sure to format it as FAT32 and that the "Quick Format" option is not selected. For complete instructions, see this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
Any luck there?
B-rock

Photosmart C310: WiFi connected, but not showing up in network via Mac or iPhone

I am using a HP Photosmart Premium C310. It is connected to WiFi, but does not show up on Mac or iPhone via Wifi:
- iPhone Airprint does not find the printer (select printer)
- Mac "add printer" does not find the printer
- newest HP Setup Application (HP_Lion_Ink_SW_v12.13.14, Dec 2011) finds printer only as long as connected via USB, reconfigures WiFi settings, but can not re-find the printer when USB cable is taken off
- I can send "ping" to the printer using the IP address shown in touchscreen info panel so it is online in WiFi
- I tried to reset factory settings for settings + network settings, no change...
Is that a defect or any idea how to fix the problem?
Best regards, any help appreciated...

Hi,
Per your description, i believe the issue may being caused by your router compatibility with Apple Bonjour, which require multicasting support in order to operate propertly.
In order to verify, try to temporary create an ad hoc connection between your iPhone and the printer and check for any change:
Step One : Restore the network defaults on the HP All-in-One
On the product control panel, touch the Setup icon ( ). The Setup menu displays.
Touch Wireless .
Touch and then slide your finger down on the display to select Restore Network Defaults .
When asked 'Are you sure? ' touch Yes .
After the network defaults restore, touch Wireless Connection , and then touch On .
The message 'Wireless Radio is now on ' should briefly display on the control panel and the Wireless light ( ) on the HP product should start to blink. The HP product is now openly broadcasting the ad hoc wireless network.
Step Two: Create an ad hoc wireless network connection between the HP All-in-One and the Apple device
On your Apple device, tap the Settings icon ( ).
Tap Wi-Fi .
Under Choose a network , find the name that starts with HPC310 , and then tap it. A checkmark should display to the left of the name.
Wait three minutes to make sure that the ad hoc connection is established and try printing from the iPhone by taping the Action icon ( ) and then tapping Print.
If you were able to print through the direct printer, it means the router more likely cause the problems..
Please clarify your router brand, model and the router firmware version if available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Device Connected But Not Showing Up In Network Map

Network Magic Version: 5.5.9195.0
Connection: Cable
Modem: Linksys WRT54GS2
Firmware: 1.0.02 build 007, Jan 21, 2010
Problem Device: Blu-ray, wireless
Operating System: Windows 7 Home Premium, Service Pack 1
Anti-virus/Firewall/Spyware: Microsoft Security Essentials/Windows Defender/Spybot
Website Issues: I can visit any site
My blu-ray is connected to my network. I know this because I have no issue streaming Netflix. However, it is not showing up on my network map.
How do I fix this?

Oh! And here's another weird thing. My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi. I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected. Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected. Wonder what's different about these 3 devices (blu-ray, 2 iphones). None were listed in the network map before I allowed them to connect yesterday.

Report Viewer Dynamic Parameter List not showing a complete list of values

Hi, I have installed the crystal report runtime 13.0.1.220 for framework 4.0 in a 64-bit windows 7 professional server.
I have an aplication that opens crystal reports using the crystal report viewer control for visual studio 2010, also version 13.0.1.220.
ISSUE: The report opens fine, but it does not shows all the available values in the dynamic parameter list.
I have tried setting the MaxRowsetRecords registry key to diferent values but it does not work.
I do not have any crystal report stand alone version installed in my server.
Please help me?

Hi Ludek,
yes i followed the instructions of the KBase you are mentioning, but it isn't working for me.
I modified the following keys:
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
1) I had to create the LOV key under the DatabaseOptions in both keys.
2) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
3) I restarted my server. Still not working.
4) Then after that i modified the following registry keys: (leaving the first 2 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\DatabaseOptions\LOV
5) Also had to create the LOV key under the DatabaseOptions in both keys.
6) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
7) Restarted my server. still not working
8) Then after that i modified the following registry key: (leaving the first 4 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\ReportView
Inside this key I created the DWORD PromptingLOVBatchSize and gave it a decimal value of 1000000
9) Restarted the server. Still not working. For crying out LOUD!!

Services for Object (GOS) Attachement List not showing after attachment

Hi All,
I have created a new entry for the Generic Object Service List and this links to a copy of the CL_GOS_SRV_ATTACHMENT_CREATE class (Create attachment) with some additional logic. However, after attaching a file, the "Attachment List" does not become available until after I re-enter the transaction. The attachment list is showing the correct attachments.
After some (understatement...) investigation, I found that even if I try and link the new service to a unchanged copy of the CL_GOS_SRV_ATTACHMENT_CREATE service in SGOSATTR, it is not working. It is attaching fine, but the "Attachment List" entry in the Services for Object Menu is still greyed out. If I attach the original class CL_GOS_SRV_ATTACHMENT_CREATE to the newly created entry it works fine. e.g. straight after I attach a file to the transaction, the menu entry becomes available.
I can't find where the re-draw of the GOS menu happens and hence can not determine what is going wrong. Does anybody know if this is part of the Kernel or is this actually done in ABAP ?
Am I missing something ? Debugging including system debugging for two days now and can't find it... very frustrating.
Any help would be appreciated.
Thanks,
Wouter.

Hi Wouter,
I had originally posted to ask if you had resolved this since I was facing the same issue, but then deleted my post when I was able to get it working. Sorry, I didn't mean to initiate a flurry of activity in such an old thread.
My scenario is I created a new GOS service entry in table SGOSATTR using transaction SGOSM. My new service uploads attachments to an external document management system via a call to a RESTful web service. The class I use in the SGOSM entry is a custom subclass of CL_GOS_SRV_URL_CREATE.
I resolved this issue by taking a look at what CL_GOS_SRV_URL_CREATE does in its EXECUTE method. The key bits to refresh the GOS Attachment List with the new attachment are...
raise event commit_required. " if SGOSM has the commit flag checked
raise event service_succeeded
       exporting eo_service = me.
These events tell any subscribers to go do their thing-- which in this case includes a refresh of the GOS Attachment List. So in the EXECUTE method of my custom subclass, after I call function BINARY_RELATION_CREATE, I raise these events...
CALL FUNCTION 'BINARY_RELATION_CREATE'
   EXPORTING
       obj_rolea     = gs_object
       obj_roleb    = rel_doc
       relationtype = 'URL'
   EXCEPTIONS
       OTHERS       = 1.
CASE sy-subrc.
   WHEN 0.
       MESSAGE s043(sgos_msg). " The attachment was successfully created
       RAISE EVENT commit_required.
       RAISE EVENT service_succeeded
             EXPORTING eo_service = me.
   WHEN OTHERS.
       MESSAGE s042(sgos_msg). " The attachment has not been created
ENDCASE.
I hope this is helpful to you even though your initial implementation was a while back. Thanks for replying to my question though!!
Cheers,
Amy

Connected servers not showing up in side menu

I have had my connected Windows servers showing up in my side menu. I log in to them every day. Then one started not showing up, but was still on my desktop. So I dragged it over each day. Now both aren't showing up there. I have tried disconnecting and relogging in to try to reset them, but no luck. My finder preferences say they should be there, but they are not. Is there a way to get them back in the side bar permanently? Thanks.

Thanks for the info on trashing the sidebars.plist file.
I was getting a weird phantom server showing up. Called itself brn_86401b. No idea how or why it appeared but it started when I tried to get file sharing working with my three computers. Two Macs and a Toshiba PC.
All work well but the brn guy decided to join in. I'm in the middle of of nowhere with no neighbours so no idea what happened . I tried to get rid of it but to no avail so decided to hit the forums for help.
Trashed the plist file did the trick. Thanks.

IP - Aggregation Level not showing in Query Designer as infoprovider

Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya Kulkarni

Hi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni

Creating new ODBC connection does not show the tables

Post Author: reemjacob
CA Forum: Data Connectivity and SQL
Hello
I am creating a new ODBC Connection to SQL Server in Database Expert. Once I created the ODBC when I expand the Database I should be seeing the tables, views and stored procedures. But instead I am only seeing stored procedures. When I right click on the DB and go to options I see that Tables, Views and Stored Procedures are checked. How can I correct this so that I see the Tables and Views?
Regards
Reem

Not an Oracle proble. Not an instant driver problem.
If the ODBC tool and driver you use, fail to construct the proper SQL to interrogate the very rich Oracle data dictionary.. what is Oracle suppose to do? Fix the software from those vendors for the user? Not going to happen. Get Oracle Raptor instead and use a proper Oracle client.
Simple test. Run the following SQLs via your ODBC connection.
To see all your objects in your schema (i.e. the one you logged into via ODBC):
SELECT * FROM user_objects
To see a list of schemas:
SELECT username FROM all_users ORDER BY 1
To view other schemas' contents:
SELECT * FROM all_objects
Also note that historically ODBC has delivered poor performance. I recall many performance tests I've done during the 90's that showed ODBC up to 3x slower and generating more than 4x the network traffic, than native connections. Not too mention using ODBC introduces an additional software layer, which means more moving parts, more complexity, and more failures.
I have not touched ODBC with the proverbial 10ft pole since - and today, I have even less need to use a clunky software layer like ODBC. And should I be forced to, it will be passthru all the way.

Available OLAP connection list not showing in Query browser

Similar Messages

Maybe you are looking for