AVG add-in for Outlook 2013

I'm running Outlook 2013 under Windows 8.1. I am also running AVG Internet Security 2015 (purchased version, not the free anti-virus one). I have enabled the AVG add-in. The first time I started Outlook after installing AVG, I noticed that the AVG group
did not appear in the ribbon. So, I clicked on "File" in Outlook and then on "Manage Add-ins". It listed the AVG add-in as being disabled because it caused Outlook to start slowly. So I clicked on the "Always enable this add-in".
That brought back the AVG group in the ribbon. Until the next time I started Outlook. Once again, the AVG group was gone. So, I went back to "Manage Add-ins". It still shows up in the "Disabled Add-ins" list, but it's different than the
other disabled add-ins. It says "This add-in caused Outlook to start slowly. It wasn't disabled because it's in the always enabled list." All the other disabled add-ins have a button for "Always enable this add-in", but the one for AVG
has a button that says "Disable this add-in". Which implies that it is currently enabled. The interesting thing is that if I click on "Disable this add-in", close the dialog, then bring it up again, and click on "always enable",
then the AVG group re-appears. Until I restart Outlook. So, although Outlook claims that this add-in is in the "always enable" list, it's not honoring it. It's disabling it anyway.
Yes, I've already contacted AVG. After a mindless chat with lots of canned answers, I finally ended up where I knew I was headed: "Uninstall AVG and re-install it." Of course, I had already done that, to no avail. But it doesn't seem like an AVG problem
anyway, it seems like an Outlook problem. And, yes, I have done a Repair operation on Office 2013.

I have other add-ins, but nine of them are disabled and four others are marked as "inactive". The AVG add-in is the only one that is currently active, but only because I forced it to be. But it doesn't stay that way; if I try again in a little
while it will be gone. Outlook claims that the plug-in was causing Outlook to start slowly, but it then says that the plug-in took 0.156 seconds to load. I can wait for 0.156 seconds. I like the plug-in because it gives me the chance to mark a message a spam
that got by the anti-spam filter, plus other options for dealing with spam.
I can't believe that Microsoft recommends using anti-virus addins. Does Outlook do any virus scanning of incoming messages? I doubt it. "Very little benefit"? Are you kidding me?
And you say that after three times of slow loading Outlook wiill disable and add-in? Even I've told it "Always enable this add-in"? Outlook just ignores my request?
This is either lousy logic or a bug.

Similar Messages

  • Where can i download the iCloud add-in for Outlook 2013?

    Where can i download the iCloud add-in for Outlook 2013?

    Hey Saab Driver,
    Thanks for the question. You can download the iCloud Control Panel for Windows here:
    iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/DL1455
    Thanks,
    Matt M.

  • ICloud Add-in for OUtlook 2013 not loading

    I am tryng to sync Outlook 2013 (WIndows 7 Ultimate 64 bit)  with iCloud. It will just not load the Add-in!
    I cna see the Add-in reference in the Registry. Apple.DAV.Addin is in  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins. Load behaviour is set to 3 as recommended. (I've tried it on 2 as well)
    How is it that it the iCloud Add-in does NOT appear when I go into "View and Manage Log-ins" in Outlook? It appears under NEITHER 'Enabled' NOR 'Disabled' categories.
    I am desperate to get this resolved... Can anyone throw any light on it ? Please?
    Not sure what is rubbish.... iCloud or Outlook!
    Best wishes
    Nick Hepher
    PS I have tried logging out of iCloud and signing back in.... probably a dozen times so far.. but with no success in solving this problem. I have also re-installed both iCloud AND Outlook. nothing works! SO PLEASE don't suggest those routes!

    I struggled with this but found the answer.  You need to set the LoadBehaviour property in the Registry to 2 (Load at Start Up).
    Run RegEdit
    Navigate to here [HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Apple.DAV.addin]
    LoadBehaviour will probably be sitting at 0.  Double click that to open, change it to 2 and you're done.
    Open Outlook, the Add-in will probably still be inactive.  MAke it active, close Outlook, open it again and it should work...

  • How to fix acrobat/pagemaker plug-in for Outlook 2013 from disabling on restart?

    I have an issue with one of my customers where they have to go in and manually enable the Adobe Acrobat plug-in for Outlook 2013 every time they close and re-open Outlook or restart their computer.  When I go into Add-Ins in Outlook the plug-in isn't in the disabled COM add-ins, but in  the Inactive Application Add-ins section and the user needs to click on Go and then check the box to enable it.  This happens everytime Outlook is restarted or the computer is restarted.  Anyone seen this issue and have a fix?  it's a Windows 7 pro machine running Adobe Acrobat X and Office 2013 (cloud install).  Office and Windows are all patched and up to date.  Running "check for updates" within Acrobat says it's up to date also.  Thanks for any input or help in advance.

    Sounds like the Security settings in the registry for Outlook 2013/Office 2013 are stuck and not letting you permantly change/the setting.  This has more to do with Office than it does with Acrobat so you may want to go to the MS website to see where these settings live in the Windows registry.

  • Install of the CRM for Outlook 2013 client fails

    Hi,
    I don't know if I'm in the right place to post, but here I am :
    Some people in my organization have got an Office 365 license as well as a
    Microsoft Dynamics CRM Online account. I want to install the client CRM For Outlook in order to allow them to manage the CRM from their Outlook client.
    So I've downloaded the soft Microsoft Online Services Sign-In Assistant for IT Professionals RTW (as it's specified I should install it first), and downloaded the
    CRM for Outlook 2013 client.
    The steps followed
    Test was made on a Dell laptop with Win 7 x64 Pro. :
    Closed Outlook
    Installed the first one (MS Online Services ... -IT Pro)
    Tried to install the CRM with domain admin privileges. It failed
    with the following warnings in the log file :
    15:35:51|Warning| Failed to register notify interface. Error : 0x800704dd.
    15:37:10|Warning| Failed to add the file C:\Users\ADMINI~1\AppData\Local\Temp\MSCRM_{B7297F92-E151-4897-870D-CDDF179FC6CE}\SSCERuntime_x64-1036.exe to the created job. Error : 0x800704dd.
    15:37:12|Warning| Installation package C:\Users\Administrateur\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\187CZTA8\SSCERuntime_x64-FRA[1].exe failed validation check(s).
    15:37:12|  Error| Installation of Microsoft Dynamics CRM for Outlook failed.
    But it works on other environment
    On the other hand, I've tested it on my computer (Win 7 x64 as well) and it succeeded. For both computers, I use Outlook 2010, and every system hadn't any trace of CRM for Outlook before.
    Note : I only wrote the
    Warning events, not the information tagged events. I searched for this problem across the Web; unfortunatly nobody seems to have reported this specific issue.
    Note 2 : If you need any complementary information, I'll be glad to provide it.
    So I am asking, where can be the matter ? Thanks in advance for any help !

    Hi,
    Try to perform a clean boot then install the CRM 2013 for Microsoft Office Outlook.
    To perform a clean boot:
    Log on to the computer by using an account that has administrator rights.
    Click Start, type msconfig.exe in the Start Search box, and then press Enter to start the System Configuration utility.
    Note If you are prompted for an administrator password or for confirmation, you should type the password or provide confirmation.
    Collapse this imageExpand this image
    On the General tab, click the Selective startup
    option, and then click to clear the Load startup items check box.  (The
    Use Original Boot.ini check box is unavailable.)
    Collapse this imageExpand this image
    On the Services tab, click to select the Hide all Microsoft services check box, and then click
    Disable all.
    Collapse this imageExpand this image
    Note This step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points. Do not
    do this if you want to use the System Restore utility together with existing restore points.
    Click OK, and then click Restart.
    This way we can eliminate the affect by background programs, install the software to see if the error still occurs.
    If the issue persists in clean boot, please collect the Setup log files from this path:
    SystemDrive:\Users\<User>\AppData\Local\Microsoft\MSCRM\Logs
    Send the logs to our email address for further analysis:
    [email protected]
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Icloud add-in causes Outlook 2013 to crash

    Enabling the ICloud Add-in in Outlook 2013 causes Outlook to crash. See error logbelow. VERY consistant.
    Running ICloud 3.1 with MS Windows 7 Professional (SP1) 64bit and Office/Outlook 2013.
    Tried rebooting per one post, no change.I've seen other posts but no real answers.
    Can ANYONE run ICloud 3.1 with Outlook 2013 ?
    I am not going to be taking extreme measures to fix this, but I would like to be able to sync contacts and notes. Any reasonable suggestions.
    Apple - anyone home out there ?
    - System
      - Provider
       [ Name]  Application Error 
      - EventID 1000
       [ Qualifiers]  0 
       Level 2 
       Task 100 
       Keywords 0x80000000000000 
      - TimeCreated
       [ SystemTime]  2013-12-19T00:11:38.000000000Z 
       EventRecordID 104918 
    - EventData
       OUTLOOK.EXE
       15.0.4551.1011
       52914ce2
       APLZOD32.dll
       4.6.18.0
       528ff03c
       c0000005
       0005840c
       1178
       01cefc4e971f1126
       C:\Program Files\Microsoft Office 15\root\office15\OUTLOOK.EXE
       F:\PROGRA~1\COMMON~1\Apple\INTERN~1\APLZOD32.dll
       20725162-6842-11e3-9c47-0010183a542d

    Thanks all.
    Was checking to see if the issue Samorren has discovered in the following post might have been in play for you:
    iTunes 11.1.4.62 freezes while syncing with Outlook
    (Similar issues can hit iTunes and the iCloud machinery, because they both use files from Apple Application Support ... hence the quick check of your situation over here.)

  • Bussiness Contact Manager for outlook 2013 download hijacked by

    HI
    I am using Outlook 2013 downloaded as part of the Office 365 small business premium package.  I am trying to download Business Contact Manager for Outlook 2013 (via
    http://www.microsoft.com/en-gb/download/details.aspx?id=36513).
    The file downloads fine, and then when I go to run the file the download seems to get hijacked by Premium Installer (see screenshot).
    The BCM file then will not download irrespective of whether I accept or decline the Premium Installer download. 
    The file seems to have something to do with Zoom Downloader.
    I have tried to remove Zoom Downloader with various anti malware software (hitman pro, Malwarebytes, etc etc). 
    I have scanned my machine with the Microsoft Malicious Software Removal Tool and AVG and neither have picked up a threat.
    Please help as I do not know whether this is a problem with my machine or the particular download.
    Thanks

    I did a complete uninstall of Driver Tuner, including making sure all traces were removed and after each attempt of downloading Business Contact Manager the download file still tries to install Driver Tuner and I cancel the installation.
    Strange that you say you can download with no problem, but have you tried to install? Microsoft Tech support was having the same problem and was having trouble even finding a mirror site that BCM could be download from without experiencing the same problems
    of the download trying to install a different program.
    Have you tried downloading BCM recently? Perhaps you could share where a clean copy of BCM 2010 can be downloaded. And before you think there is no problem, try and install it. After the extraction is when another program tries to install.
    Again, short of formatting my drive and reinstalling all programs, everything has been checked and my system is clean.
    So you think Time Warner Cable DNS has been hijacked? If so, why is it only the program files from the Microsoft site that has this problem.
    Please share the site where a clean copy of BCM 2010 can be downloaded.
    I visited the link provided by the OP and downloaded the offered file
    http://www.microsoft.com/en-gb/download/details.aspx?id=36513
    http://www.microsoft.com/en-gb/download/confirmation.aspx?id=36513
    http://download.microsoft.com/download/B/3/3/B333E334-EBEB-451E-AE76-ACD0C1AB1A6A/BCM2010-BCMSetup-x86-en-US.exe
    It has downloaded cleanly for me, extracted, installed, and running fine, no sign of DriverTuner or anything else that has been mentioned here so far.
    I did need to have Office2013 installed - this BCMsetup refuses to install with only Office2010 (despite the filename, not all that surprising).
    So I'm guessing that your uninstallation of DriverTuner might have left some remnants behind, and that is probably hooking/intercepting the download and/or the BCMsetup you're doing, or there's some other crapware lingering.
    And true, I agree it's unlikely that Time Warner Cable DNS has been hijacked (but at the time you posted, who knew if you were using an ISP DNS or some other local thing) - it's much more likely that your pc is infested with some further junk.
    I'm in Australia, so I could be contacting a different Akamai CDN host than you are using, but since there aren't floods of people complaining about the same issue you're having, I'd guess it is a localised issue for you.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How do I leverage a custom theme for Outlook 2013?

    Microsoft has a problem. They use the term "theme" in Office in 2 different ways: 1) the 3 background colors you can choose of the Office applications and 2) a collection of colors, fonts, and layout that can be customized and defined by the user
    for the applications.
    I know how to create a theme in PowerPoint and save it as a default for all new presentations. Allegedly you can you this across Office applications but this is where it breaks down (as far as my user experience goes).
    I've created a theme in PowerPoint. It has my custom colors. I want to use that same collection in Outlook.
    I can apply it on a email by email basis (Options menu for an email), but I want the default email (new or reply) to use that custom theme. I see my theme in the drop down menu under a heading of Custom, but there isn't a way to set it as default
    (behavior differs from PowerPoint here).
    So I look under the Outlook File menu, then Options and select Mail. You can change stationary, but the custom theme isn't an option there.
    Then there is Styles under the Format Text menu when in a new email. There are color options and font options, but again, no way to leverage the work I did in creating the custom theme.
    Searching on customizing themes for Outlook only gets me answers on the first use of the word theme, not the latter.
    Is there no way to you the theme I created for Outlook 2013?

    Its very simple - if you want a product that remains consistent and does not change its layout every few years, that is fully customizable, and will remain being supported by subsequent operating systems, then get an open source product running in an open
    source OS. It seems that you can no longer rely on MS to provide consistency, stability, or support for their own products. 
    When will MS realise that customer familiarity with their products is their intellectual property, like branding, which you would never trash every five years. Imagine that MS wanted to change their name to a new company name, or their Outlook brand to Inlook
    - it would never happen. So why is thee trade getup and arrangement changing so often and against what their customers want? Is it to justify thee new products? Maybe with cloud and 365, they will finally be happy and stop mucking about with what works (after
    they change everything back to '95 /XP format?).

  • Difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013

    Hi, We are building company site with Sharepoint 2013 Enterprise Edition and were wondering what is the difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013? What are the roles/purposes of each one? What
    happens if only Reporting Services Sharepoint Mode  installed or vise versa.
    Thank you in advance

    Reporting Services in SharePoint mode is a service for displaying, managing, and creating SSRS reports within SharePoint. The addin is a pre-req for SharePoint that is used to display reports and is required for Reporting Services in Native or SharePoint
    mode, but does not by itself do anything.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Set the properties Editor of Add-in for Outlook 2007

    Hi All,
    I've developed an add-in for outlook 2007, the setup doesn't give any errors but when I open the Outlook the add-in is disabled.
    May be because is the only add-in with <any Author>.
    How can I set this properties in visual studio 2010?
    Thanks,
    Thomas

    Hello Thomas,
    First of all, check out the Trust center settings in Outlook. Are macro security settings applied to add-ins as well? Are only signed add-in allowed to run?
    Microsoft Office applications can disable add-ins that behave unexpectedly. If an application does not load your add-in, the application
    might have hard disabled or soft disabled your add-in.
    Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer
    if you stop the debugger while the Startup event
    handler in your add-in is executing.
    Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application
    might soft disable an add-in if it throws an unhandled exception while the Startup event
    handler is executing.
    When you re-enable a soft-disabled add-in, the application immediately attempts to load the add-in. If the problem that initially caused
    the application to soft disable the add-in has not been fixed, the application will soft disable the add-in again.
    Read more about that in the How to: Re-enable an Add-in That
    Has Been Disabled article.
    P.S. You need to sing the add-in files with a digital signature to see the author name in Outlook. 

  • I require a TIMS database add in for office 2013

    The add in for that was available for Office 2010 and 2007 edition. I am on a 2013 office edition. I cant seem to find the add in version for 2013. Is there a work around for that?

    Hi UDIT,
    From the description, you want to find a TIMS database add-in for Office 2013 and the add-in only available for Office 2007 and Office 2010 edition.
    I suggest that you contact the vendor of this add-in to see whether there is a new version works for Office 2013.
    Best regards
    Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Where can I download the icloud add in for Outlook 2010 for PC?

    I recently purchased Outlook 2010 and I don't seem to have the iCloud add in and I can't figure out where to download it. I'm using Windows 7.

    I have done that. When I try to synch my contacts and calendar I get the message: "Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
    But I do have Outlook configured with a default profile. When I follow the rabbit trail of troubleshooting it comes down to checking to make sure the iCloud add in is active. When I check that, not only is it not active - it's not there. Thus my original question: Where can I get the iCloud add in for Outlook?

  • Where can I download iCloud Add-in for outlook 2007

    I donloaded and installed iCloud Control Panel for Windows v1.1 on my pc, followed the instructions, all my calander items got uploaded to icloud, however, changes are not syncing, I read on some posts that you need to activate iCloud Add-in for outlook 2007, when I look for it under Tools > trust center, I don't find it anywhere.
    I spend so much time trying to find it and download it, no success.
    I uninstalled icloud from my pc, and reinstalled it, but still the same.
    Can someone help?

    Hey Saab Driver,
    Thanks for the question. You can download the iCloud Control Panel for Windows here:
    iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/DL1455
    Thanks,
    Matt M.

  • How do i get the icloud add in for outlook 2010 64 bit

    I am running windows 7 64 bit and outlook 2010 64 bit. I had the icloud add in installed but it became corrupted, so i removed it, but now my iphone calendar does not sync with outlook and i need to find a way to download and reinstall a functioning add in.

    I have done that. When I try to synch my contacts and calendar I get the message: "Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
    But I do have Outlook configured with a default profile. When I follow the rabbit trail of troubleshooting it comes down to checking to make sure the iCloud add in is active. When I check that, not only is it not active - it's not there. Thus my original question: Where can I get the iCloud add in for Outlook?

  • Icloud add-in for outlook does not load

    I have the sync working for calendar and contacts between icloud and Outlook--  but when I close Outlook, the icloud Add-in for Outlook does not load--  the icloud label does not appear on the ribbon at top of Outlook.  I must go to File> Options> Add-ins> Manage Com Add-ins---  and manually check iCloud Addin to get it loaded.  It will not load at start-up automatically as it should.

    I struggled with this but found the answer.  You need to set the LoadBehaviour property in the Registry to 2 (Load at Start Up).
    Run RegEdit
    Navigate to here [HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Apple.DAV.addin]
    LoadBehaviour will probably be sitting at 0.  Double click that to open, change it to 2 and you're done.
    Open Outlook, the Add-in will probably still be inactive.  MAke it active, close Outlook, open it again and it should work...

Maybe you are looking for