Avitek Sample Application - problems after imported to Eclipse

I downloaded "Avitek™ Medical Records Sample Application" and started a domain successfuly with this aplication. Then I imported its to my Eclipse Juno with the interest to debug this sample application. I included every lib are need. Now I am getting the error "Default target install does not exist in this project" in every build.xml on the target "<project name=".
Other error I got is "The type javax.jms.Message cannot be resolved. It is indirectly referenced from required .class files" in the PatientNotifierBroker project. I looked for javax.jms_1.1.2.jar and I had already added this library.
Have someone face both problems after imported this sample?

11g by default is case sensitive username/password.
You can disable that with setting parameter SEC_CASE_SENSITIVE_LOGON to false.
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

Similar Messages

Universe access problem after importing from R2 to R3.1

Hi all!
We have a problem with universes in 3.1: even with administrator user it keeps showing FRM 00008 error message (You are not authorised to use this document. The universe could not be found in the Central Management Server...) after importing successfully any universe or trying to open any universe locally.
All of the universes were imported using the Import Wizard. The CMS server have been restarted and is running, the CMS ports are visible, universe, connection and application access rights are full control (for the administrator user).
Any idea would be welcome on what else should be checked or set.
Thanks and best regards,
László

Thanks for the tip, but it didn't help. I double-checked object right for administrator, and where it wasn't set as full control, I changed it to full control (universe, applications - DeskI and Designer, and the relevant connection).
And the administrator user is member of only two groups: Administrators and Everyone. (Everyone has no access on these objects, because every user in our BO enterprise is a member of a special group, so there's no need to grant rights to Everyone).
Any other idea?

SSO java sample application problem

Hi all,
I am trying to run the SSO java sample application, but am experiencing a problem:
When I request the papp.jsp page I end up in an infinte loop, caught between papp.jsp and ssosignon.jsp.
An earlier thread in this forum discussed the same problem, guessing that the cookie handling was the problem. This thread recommended a particlar servlet , ShowCookie, for inspecting the cookies for the current session.
I have installed this cookie on the server, but don't see anything but one cookie, JSESSIONID.
At present I am running the jsp sample app on a Tomcat server, while Oracle 9iAS with sso and portal is running on another machine on the LAN.
The configuration of the SSO sample application is as follows:
Cut from SSOEnablerJspBean.java:
// Listener token for this partner application name
private static String m_listenerToken = "wmli007251:8080";
// Partner application session cookie name
private static String m_cookieName = "SSO_PAPP_JSP_ID";
// Partner application session domain
private static String m_cookieDomain = "wmli007251:8080/";
// Partner application session path scope
private static String m_cookiePath = "/";
// Host name of the database
private static String m_dbHostName = "wmsi001370";
// Port for database
private static String m_dbPort = "1521";
// Sehema name
private static String m_dbSchemaName = "testpartnerapp";
// Schema password
private static String m_dbSchemaPasswd = "testpartnerapp";
// Database SID name
private static String m_dbSID = "IASDB.WMDATA.DK";
// Requested URL (User requested page)
private static String m_requestUrl = "http://wmli007251:8080/testsso/papp.jsp";
// Cancel URL(Home page for this application which don't require authentication)
private static String m_cancelUrl = "http://wmli007251:8080/testsso/fejl.html";
Values specified in the Oracle Portal partner app administration page:
     ID: 1326
     Token: O87JOE971326
     Encryption key: 67854625C8B9BE96
     Logon-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
     single signoff-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout
     Name: testsso
     Start-URL: http://wmli007251:8080/testsso/
     Succes-URL: http://wmli007251:8080/testsso/ssosignon.jsp
     Log off-URL: http://wmli007251:8080/testsso/papplogoff.jsp
Finally I have specified the cookie version to be v1.0 when running the regapp.sql script. Other parameters for this script are copied from the values specified above.
Unfortunately the discussion in the earlier thread did not go any further but to recognize the cookieproblem, so I am now looking for help to move further on from here.
Any ideas will be greatly appreciated!
/Mads

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

Hyperion Installation and Sample Application Problem

Hi,
I am a new user of Hyperion Planning 9. I am an Oracle DBA by profession with training and experience in Data Warehousing.
After the installation of Hyperion Planning 9.3.1, I do not have dimension library under http://server4:19000/workspace -> navigate
I want to load the Sample Application to practice with Hyperion functionalities.
Implementation: (VMWare Server)
1. Oracle Database - Server1
2. Hyperion Shared Services - Server2
3. Hyperion Essbase - Server3
4. Planning, BI+ - Server4
Any advice/assistance will be appreciated.

Did you give your self admin access in Shared Services (http://localhost:58080/interop/)? When installing the application the admin user only has provision rights and can't access the dimensions.
You can also go to planning directly by going to this link instead of going through workspace:
http://localhost:8300/HyperionPlanning/LogOn.jsp
Does this help?

Sample application problem

I am following the guide to construct pages.
My problem is that i just create a page in the sample appliction and
i want to run it but when i click the run page
icon the page is not run. A user/password screen appear,
and then i am sent to the main form of the demo application.
Not the page i just build and want to test.
Should i have to mmodify the login screen to point to
my page?
Where is located the name of the first form in the login screen? I just cant find it
Regards,
Pierre

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

"Messages" problem after importing .xsd file as external definition

Hello,
I received an .xsd file from a customer and need to import it as an "External Definition" in order to create the "Message Interface". The structure of the xsd looks like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:px="http://www.opentrans.org/XMLSchema/1.0" targetNamespace="http://www.opentrans.org/XMLSchema/1.0" elementFormDefault="qualified">
<xsd:element name="ORDER">
</xsd:element>
<xsd:element name="ADDRESS">
</xsd:element>
<xsd:element name="ARTICLE_ID">
</xsd:element>
</xsd:schema>
After importing and looking at the tab "Messages" I get numerous entries, for each <xsd:element> I get one message! But I basically only need one "Message" that holds my complete xsd-file.
I tried inserting <xsd:element name="COMPLETEORDER"> right after the <xsd:schema>-Tag but that didn't work either. Somehow I need to sum up all the <xsd:elements>.
Does anyone have an idea? Thank you very much!
Peter

Hello Prateek, Hello everyone,
I now know what the problem is. I downloaded XMLspy and checked on the structure:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:px="http://www.opentrans.org/XMLSchema/1.0" targetNamespace="http://www.opentrans.org/XMLSchema/1.0" elementFormDefault="qualified">
<xsd:element name="ORDER">
</xsd:element>
<xsd:element name="ADDRESS">
</xsd:element>
<xsd:element name="ARTICLE_ID">
</xsd:element>
<xsd:simpleType name="dtBOOLEAN">
</xsd:simpleType>
<xsd:simpleType name="dtCOUNTRIES">
</xsd:simpleType>
<xsd:element name="SUPPLIER_AID">
</xsd:element>
<xsd:simpleType name="typeSUPPLIER_AID">
</xsd:simpleType>
</xsd:schema>
Between the long list of <xsd:element> tags there are some simpleTypes on the same
level. Now if I insert
<xsd:element name="COMPLETEORDER">
<xsd:complexType>
<xsd:sequence>
on top, the <xsd:sequence> would be on the same level as the simpleTypes - which is not valid!
But can I just move all the simpleTypes, e.g. into an <xsd:element>??
That would be changing the customer's structure which I think is not a good thing!?
Thank you again for your help! I really appreciate it!
Best regards,
Peter

Problem after importing

Hi,
I have a pre defined html help file for my project done by
someone else.
Now i have to edit the help file, so i have created a new
project and tried to import the html files from the old help file
which i had. Import was successfull. but i was not able to edit the
contents placed in "Drop Down Text editor" field it has been
encrypted. but the all the datas are present while viewing the
file.
Pls tell me how can i edit the "Drop Down Text editor" text
after importing the file.
Thanks,
Raja

Welcome to the forum.
What is a pre-defined help file? Do you simply mean someone
else created the project? You also say you you imported the files
but it's not clear why. Maybe that does not matter, I mention it in
case the next bit is not the problem as then I will need to know
more.
It should be as simple as double clicking the drop-down
hotspot. Does nothing happen if you do that? The text should be
above the ordinary text when you look at the HTML.

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Front end application error after import script run successfully in R12

Hi ,
i got an exception in R12 environment.
i developed one simple OAF page and deployed in apps import script run successfully.
but when i am opening that page in Front end it will give an exception.
That is
Exception Details.
oracle.apps.fnd.framework.OAException: Could not load application module 'tflsm.oracle.apps.po.per.server.TflsmAM'.
## Detail 0 ##
JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
i will check all the class files and xml files of Application Module below top, all are there in the server top(below top)
/u02/TST22/apps/apps_st/comn/java/classes/xxfls
but i got the exception.
is there any different structure in R12.
i.ein the server top /u02/TST22/apps/apps_st/comn/java/classes/xxfls (Here my all class files in Binary mode and xml files in ASCII mode)
only CLASS files are needed or XML files are also need.(i am moving all CLASS and XML files)
could you please help me on this.
Thanks with Regards,
Muthu

Muthu,
This issue usually occurs when the AM.class file is not available at the given location. Try to find out on the server whether this
tflsm.oracle.apps.po.per.server.TflsmAM exists.
If still the problem persists then go for redeployement by deleting the existing one.
Regards,
Gyan

Problem after importing - now EVERYTHING slow!

I recently made my first iMovie and burned to DVD with no problems. It was great! I am now trying to import video for a new project but it is not so smooth.
It seems to import OK, but when the letterboxing gets almost through it seems to stall. I end up having to quit and trash the project to start again but then my computer runs extremely slow for a very long time then seems to eventually come back to normal.
Here are some issues:
-I still have the old project on my hard drive, so I know it is taking a lot of space. But it was not slowing anything before starting a new project.
-the clip on which the letterboxing seems to stall is a long one. Could this be a problem?
-I've tried a few times to bring this movie in, each time trying smaller chunks so that it does not take too much space but it does not change anything.
-Why, even after trashing the new project, is my computer so slow? It takes several minutes perform any task and sometimes just goes to a blue screen.
I am using iMovie HD 5 and I have the version of the iMAC prior to the built-in iSight and INTEL processors.
Sorry this is long-winded and thanks for any help/advice!!!

Welcome to the forum.
What is a pre-defined help file? Do you simply mean someone
else created the project? You also say you you imported the files
but it's not clear why. Maybe that does not matter, I mention it in
case the next bit is not the problem as then I will need to know
more.
It should be as simple as double clicking the drop-down
hotspot. Does nothing happen if you do that? The text should be
above the ordinary text when you look at the HTML.

Problem after importing iPhoto library - Syncing iPhone/iPad: wrong dates

Hi everyone,
I have a problem, which I cannot seem to find a solution to:
I have imported my iPhoto library into Aperture without any hassle. The problem now is:
When I sync my iPhone/iPad within iTunes, and I click "sync with Aperture"(instead of iPhoto) under "Photos", then "select only the projects of the last 3 months", I always wind up with ALL my Photos (20.000 +) that I have imported with Aperture. Not just the last 30+.
The individual photo's meta information in Aperture is however correct: i.e. a project containing pictures from 2006 still shows the pictures being from 2006. So they shouldn't show up under the photo sync within iTunes when I click "last 3 months", right?
What am I doing wrong? Does Aperture set the date to all the imported projects to the same current date they were imported on? Is there any way to correct this, or sync only the photos of the last 3 months?
Otherwise I will have to go back to iPhoto...
Thank you!

again the same problem, i emptied my trash and again resync after uncheck the photo sync option all the pics were gone, there wasnt any cache in pictures folder, i selected the photo to be sync arround 4573 and again its updating only 405 and i dont see any cache in pictures folder, i dont know may be in lion its saving cache somewhere else, im unable to find it and unable to do it right way. i searched in spotlight for ipod photo cache nothing showed up.
Helpless

Contacts application problem after iOS 5

Hi,
I have a problem with the contacts application on my iPhone 3GS after I installed iOS 5.
I can't add contacts or edit the contact's I already have on the iPhone. The "+" symbol which was in the right coner is not there.
Have anyone a solution for this. I already tried to install the backup again, but it didn't helped.

You don't have to actually restore the whole phone like everyone else said. I went to another forum because I wanted to avoid restoring the whole thing. Just make sure that your contact is in sync with iCloud. This can be done by going to your settings, then iCloud, then turn on your contacts. If you have problems setting up an event on your calendar as well, do the same thing through iCloud, by turning calendar on.
Check back with your contacts and the plus sign should appear.

Mobile WebDynpro Sample Application Problem

Hi,
Iam new to MI Technology, I have couple of doubts.
I have a application which is already developed using Java Webdynpro, now i want to view the application in the mobile. What should i do in-order to show it in a blacl-berry device. If so what all configurations need to done in SAP netweaver Studio. Is any softwares needs to be installed , I am using SAP Netweaver Portal 7.0 SP10. Also could anyone help in create a sample project(Step By Step ) .

Hi Sankar,
Any webdydnpro application can be viewed in the black berry emulator (UI elemnts rendering will be different though)
You need to have MDS and blackberry emulator installed on your system.
Run the webdynpro application make note on the URL and type the same URL in the blackberry browser.
Check the following Wikis:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/mobile/mobileWebDynpro-Alwaysconnected+client

Problem after importing partitions

Dear all,
DB : 10.2.0.4
Solaris 5.10
We use to import partitions regularly from our production db to test db for testing purposes. but, when I did the same this time, m getting slowness in the queries which are accessing the newly created partitions. I found the below from the trace file of the session
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808324 blocks=1 obj#=518727 tim=26162705919866
WAIT #25: nam='db file sequential read' ela= 20 file#=19 block#=2808325 blocks=1 obj#=518727 tim=26162705919967
WAIT #25: nam='db file sequential read' ela= 25 file#=19 block#=2808326 blocks=1 obj#=518727 tim=26162705922054
WAIT #25: nam='db file sequential read' ela= 222 file#=19 block#=2808327 blocks=1 obj#=518727 tim=26162705922357
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808328 blocks=1 obj#=518727 tim=26162705922464
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808329 blocks=1 obj#=518727 tim=26162705922568
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808330 blocks=1 obj#=518727 tim=26162705922680
WAIT #25: nam='db file sequential read' ela= 24 file#=19 block#=2808331 blocks=1 obj#=518727 tim=26162705922798
WAIT #25: nam='db file sequential read' ela= 23 file#=19 block#=2808332 blocks=1 obj#=518727 tim=26162705922903object with object_id 518727 is the newly imported partition.
Please advise ?
Kai

Hi,
If you have index on object_id, then i am assuming it is doing Index Range Scan.
With Index Range Scan, I see no problem with the wait event you have provided. It could be just that you have slow IO, but this should impact the entire database and not only to this partition.
If there is no index on object_id, or it is not doing Index Range Scan, then I suppose there is a reason for this query going slow.
Regards
Anurag Tibrewal.

Problem after importing bookmarks from chrome

My Mac is in German because I live in Berlin. This means that here I have to translate the messages from Safari into English, but it's fairly straightforward. My German is at native speaker level.
Problem is...
When I tried to import the bookmarks and history from Chrome, the progam hung up and I had to "immediately end" it. Then I tried again, this time only importing the bookmarks. It worked, but the result is that, although I have my bookmarks, Safari is not allowing me to delete or modify anything. Each time I try it gives me the message that I "have to accept or delete" the data that I've received from Chrome in order to proceed. But, whether I click on "accept" or "delete", nothing happens. In other words, the data is neither "accepted" nor "deleted", and I can't do any deleting or modifying of bookmarks without bringing up this same message, over and over.
So I can neither go back to the previous state by "clearing" Safari, reversing the process, nor can I go forward. All the bookmarks are as it were "frozen" in the positions that they had when I first imported them, and there is seemingly nothing I can do about it.
I would love to be able to delete Safari and download it again, but this doesn't seem to be possible. I also don't even know if this would alter the settings.

I think in this case you need a addon:
*[https://addons.mozilla.org/en-US/firefox/addon/bookmark-deduplicator/?src=search Bookmark Duplicator]
*[https://addons.mozilla.org/en-US/firefox/addon/bookmark-duplicate-cleaner/?src=search Bookmark Duplicate Cleaner ]
*[https://addons.mozilla.org/en-US/firefox/search/?q=bookmarks+duplicated&appver=28.0&platform=windows More Results]

Avitek Sample Application - problems after imported to Eclipse

Similar Messages

Maybe you are looking for