Avoiding rendering in FCP when working with Quicktime sources

I do a lot of stuff which requires clips dropped in from a variety of odd sources like SnapzPro screen grabs, ripped DVD (via Handbrake), and other compressed formats in differing resolutions.
My usual method is to use Quicktime export to bring everything up to my working resolution, aspect ratio and frame rate (PAL DV 48k) before bringing in to Final Cut. Mainly because I hate the way that FCP won't play anything except stuff off tape in the timeline without rendering.
But. Using the Quicktime DV export works fine for the pictures, but audio still has to be rendered. (It's not a missmatch of sampling rates 32k/48k by the way).
Can anyone offer a set of export settings for Quicktime that I can use on my sources to get me files that work as well as stuff captured off DV tape?
Here's hoping

Have you tried the appropriate DV preset in compressor? This should bring everything up to snuff and eliminate (or at least minimize) the possiblity of operator error.

Similar Messages

How to avoid error "HTP 404" when working with "Google Suggest" and Apex 3?

Hi,
I am trying to implement the GOOGLE SUGGEST function in an APEX application (a sample of Google Suggest + APEX can be found in http://htmldb.oracle.com/pls/otn/f?p=22777:6:4312817919732414 or http://teradata.weizheng.net/2009/08/using-google-suggest-in-apex.html).
The release of APEX is 3.2.1 and of RDBMS is 9.2.0.8 (64 bits). They are installed on a SOLARIS 9 SPARC 64-bits server, where i have an EBS 11.5.9 application. So, i´m using RDBMS and Apache of EBS 11.5.9 to work with APEX 3.2.1.
I can see the list generated by javascript function when i type in P2_REPORT_SEARCH, but when i SELECT an item (pressing ENTER), i have got an "HTP 404 error". Looking in the logs in the apache, i have found this error:
http://prigaudi1.sote.tasa.com.ar:8002/pls/apex/wwv_flow.accept
[Tue Jul 26 10:12:53 2011] [error] mod_plsql: /pls/apex/wwv_flow.accept ORA-0
wwv_flow.accept: SIGNATURE (parameter names) MISMATCH
VARIABLES IN FORM NOT IN PROCEDURE: AQ,OQ
NON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM:
I think that "AQ" and "OQ" are variables of "ac.js" javascript.
The JAVASCRIPT procedure that is situated on HTML HEADER of PAGE 2 is :
<script src="/i/BASE_CONOCIMIENTO/ac_google/ac.js" type="text/javascript"> </script>
<script language="Javascript" type="text/javascript">
function iac()
{ InstallAC(document.wwv_flow,document.getElementById
('P2_REPORT_SEARCH'),"","ASKTOM.incsearch_articulo","en"); }
</script>
The JAVASCRIPT function that is situated on HTML BODY ATTRIBUTE is:
onLoad="iac()"
My "INCSEARCH" procedure is described below:
CREATE OR REPLACE PROCEDURE IncSearch_ARTICULO(qu VARCHAR2, hl VARCHAR2, js VARCHAR2,
client VARCHAR2 default null) AS
l_List1 varchar2(10000);
l_Query varchar2(255);
l_separator varchar2(10) default '';
BEGIN
l_Query := qu || '%';
FOR x IN (select TIT_TOPICO,NULL AS COMPLEMENTO from BAC_TOPICO where Upper(TIT_TOPICO) like Upper
(l_Query) order by 1)
LOOP
l_list1 := l_List1 || l_separator || '"' || x.TIT_TOPICO || '"';
l_separator := ',';
END LOOP;
owa_util.mime_header('text/html', false);
owa_util.http_header_close;
htp.p('sendRPCDone(frameElement, "'|| qu ||'", new Array(' || l_List1 || '), new Array(""), new Array(""));');
END INCSEARCH_ARTICULO;
I think this procedure is working fine on Apache Server:
Example:
http://prigaudi1.sote.tasa.com.ar:8002/pls/apex/asktom.incsearch_articulo?qu=A&hl=A&js=a <enter>
sendRPCDone(frameElement, "A", new Array("Ayuda Como crear un topico en la base de conocimiento"), new Array
(""), new Array(""));
I would like to know how i can solve this problem of HTP 404 and "SIGNATURE (parameter names) MISMATCH"
Best regards,
Sergio Coutinho

Hi,
Maybe i provided too much information about my problem,
Well, i tried to implement the solution "Google Suggest" in my APEX 3.2 application, but i´m having now an "HTTP 404 error" when i select an iten in the list buided by "google suggest".
Can anybody make a suggestion of how i could analize this error and fix it?
Best regards,
Sergio Coutinho

After Effects freezes when working with footage which is just being rendered

After Effects freezes when working with footage which is just being rendered... this is a bug which was introduced with CS6 and I wonder if this is really so hard to fix. When you are working with footage from a 3d application which is just being rendered (in my case on a small farm via deadline) it has become impossible to work with After Effects. AE freezes for several minutes and only eventually returns to work. I suspect After Effects is reloading newly rendered frames in the background although I have disabled that in the preferences. With CS5 i can work on the frames already rendered without any problems. I filed a bug report about a year ago.
Greetings,
Daniel

If you don't have Service Pack 1 for Windows, you should get it. No guarantees, but it may help. For the moment, I'd just wait until the 3D renders are complete before importing... there isn't much else you can do at the moment, anyway.
There's only one application I've seen that can reliably, "works-every-time", read media files as they're recorded: Avid Newscutter...but then, it was created to do precisely that. AE wasn't.

Final cut pro problem when exporting with quicktime movie

Hello!
I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
keyfram 10
bitrate 6000
faster encode
size 1920x1080 HD 16:9
its not a problem the movie works fine all the way.
But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
If you have an e-mail i can send you just the part where this happening.
Please help me!
Thanks Gabriel

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

Crashing, no 'UNDO' when working with Chinese Text

We have a number of users working in InDesign CS4 6.0.3 on Windows XP SP3. When they enter Chinese text into text boxes, frequently their UNDO command is no longer available. This basically renders files unusable. In addition to this, the application will frequently crash when working with Chinese text. The only workarounds that have sometimes worked include:
1.       Switching keyboard mapping or just selecting English to see if it affects the Undo function.
2.       Reset the preferences for InDesign.
3.       UNDO problem occurred when jumping between web browser and InDesign. Workaround was to select a menu item from within InDesign - any menu item, it didn't matter - and the key command began working again.
Has anybody else run into these problems?

Peter, have you had any problems accessing the web pages for the Release Notes? After finally digging under about 3 layers of redundant links (annoying in and of itself), the final links to Release Notes for InDesign patches 6.0.4, 6.0.5, and 6.0.6 brought me to the following:
InDesign 6.0.4 took me to InCopy 6.0.5
InDesign 6.0.5 took me to InCopy 6.0.6
InDesign 6.0.6 took me to InDesign Server CS5
I got approval to install all patches on a person's computer, but now I can't even read the warnings before doing so!

Working with QuickTime on the Web

Here is my web site that I need help with.
<http://www.greydogmac.com/football/gamepages.htm>
I am a just learning about putting QuickTime on the web.
Everything works fine on my G4. In an attempt to keep all of my clips on one page, I used code to open the video on the computer's QT application, not the QT plugin. Now those clips will not open on my school's PCs.The movies are self contained.
I used code suggested by David Egbert and the book, QuickTime for the Web.
I think part of the problem is the school's version of QT is 5.0, and I'm using 7.0.3.
Is there a "common denominator" for successful size and format for putting QT on he web?
Any suggestions?
Hank Kearns

what's the best video program to do when displaying movies on the web? I'm working with quicktime and most seem to have it. Or do they? What video program is the least likely to create problems with users?
Flash. If you're exporting Quicktime files you can export as h.264 that will play in Flash Player 9+
Use the JW player to play h.264 files in a flash player.

Remote Not Working With QuickTime 7.3.0

Hi I just upgraded and realized my frontrow remote has stopped working with Quicktime. The remote works with VLC, iTunes etc but not QT. Forget about scanning forward or backward it cant even adjust the volume. I never had the problem before. I have tried playing both avi and mp4 files.
I run Tiger and have a macbook

As a follow up -
I spoke with Apple Support about this and was routed to a few people who were helpful, and moved it up to the engineers of Keynote (and the white remote?) for a solution.
A few days later I received this reply:
Hello Eric, I have heard back from the engineers about this. It looks like as long as Keynote 6.0 is present on the system it will default to using the remove in that application. If you remove Keynote 6.0, which we would not recommend, then you can use Keynote 5.3 with the remote. Presently though this is normal and expected behavior.
I replied by expressing my disappointment that this wasn't functional, since I'm not comfortable using Keynote 6.0 yet. Short of uninstalling 6.0, the only workaround I have found is to use the iPhone/iTouch Keynote remote app, or make a duplicate copy of your presentation to be opened in 6.0 (and using the remote there).

Aperature crashed after 3.3 update. I am a novice at best when working with restore functions. Any suggestions on how to fix this problem?

I had the 3.3 update window with Aperature pop up and say that I could no longer work with my library until updating Aperature. The update froze up about 90% through the completion of the last set(9 of 9/ 90% complete) and ran over night. My MAC shows version 3.3 installed. When I try to open Aperature, I get a system crash error. I am a novice at best when working with software and I am panicing because of the amount of pictures that I have on the system. I do back them up but do not know how to restore Aperature software(I purchased it before the app store and can not find it). Please advise.

There is an Aperture forum that you can repost in, that is where you will find the guru's for that product. Simply click: Aperture to get there. BTW before you do please complete your profile, it makes it much easier for those attempting to assist you. You can find instructions by clicking Profile Update

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Win7-64 Photoshop CC blank Save As dialog, then crash, when working with video / frame animations

Hi, I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons.   If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.

Frustrating that this thread has petered out, since I'm having the exact same issue. Did you ever find a way to improved stability?
Also of note, the issue followed me across machines. Two weeks ago I purchased a new machine, figured if that didn't solve the problem nothing would... It didn't. :\
The only similar factors are that the machines both are 64bit Windows 7 (a fresh OEM install on the new box) and have nVidia-brand graphics cards. (Again, though - not the SAME graphics card, picked up a new one with the new machine.) No drive cloning was involved: this is completely new hardware, a fresh factory install of Windows 7, different antivirus (went from AVG to Avast), and new download of Photoshop CC from CreativeCloud.
Looks like our event details are quite similar, too.
Log Name:
Application
Source:
Application Error
Date:
4/6/2014 1:57:39 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
REDACTED
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a9f2
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x1ca4
Faulting application start time: 0x01cf51c68639ec43
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: 5268f22b-bdbd-11e3-b9df-d850e65afc6f

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

What earlier version of FCP will work with the intel-3processor?

what earlier version of FCP will work with the intel-3 processor?

The version of the CR designer that the reports were created in is really not that important. Though more on that below. What you need is Crystal Reports XI R2A (11.5.x). That is the last version of CR to ship the Report Designer Component (RDC) that you are presumably using at this time. Note that this version is out of support thus no fixes, no phone support, though we welcome your queries on these forums. To obtain CR XI R2A you will have to contact sales; 866-681-3435. Do not get CR 2008 (12.x) as this version does not ship the RDC and only has the SDK for .NET and Java.
Re. version of the reports. While the version of the designer the reports were created in should not be that important, the older the designer, the more potential problems you may run into. Updating the reports to CR XI R2A is highly advised. You can do this manually by simply opening the reports in the designer and saving them - making sure they still run once that is done. Alternatively, you can do this in code by simply using the .SaveAs method, or exporting to rpt file format. This may not however update the database connectivity correctly (the database engine was completely rewritten in CR 9) and testing will be needed to make sure these reports still work. This is particularly true of your version 8 reports. Version 9 reports and later should be OK.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Java.lang.NullPointerException when working with one rfc

Hi,
java.lang.NullPointerException error when working with one rfc.
Regards,
Gurprit Bhatia

Hi
Can you elaborate your problem?
Where exactly getting the problem ?
Regards
Akshaya

When working with numbers twice now i've gotten a blue screen then restart on iphone 5s

anyone else experiencing this issue? and any possible reason(s)/solution(s). it only seems to happen when working with Numbers. it has also happened on my ipad 2nd gen.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then try Numbers.

Avoiding rendering in FCP when working with Quicktime sources

Similar Messages

Maybe you are looking for