AW client configuration updates

Hi,
Any updates done from AW client (configuration manager) will be updated in Logger database. Right.?
So is there a way to backup the configuration data before user make any configuration changes.? So that we can backup the configuration data and restore in case of mishap by the ldap user.
Also please let me know what all the configuration changes an AW client can make.? (I mean to say what all the components an AW client can access.)
Thanks and Regards,
Karthik U R

With all due respect....
"AW client is nothing but AW Distributor in which you can restrict different admin access. Basically the access of AW client is subset of the access of AW distributor. It is done during the setup."
and...
"OK, So we can set the access level during client AW installation.
Also can we restrict the access,Right.?
like should not be able to access script editor, Instead can access only Agent list, Skill groups, team list .etc.. "
These statements are NOT accurate.
A client AW has all the ability to make configuration and script inserts, updates, or deletes as any other AW. You cannot set any such access during installation. It depends on who the USER is who's logged in to the machine, versus what the machine itself can or cannot do.
In order to restrict access, you'd need to create a read-only user, or use Feature Control Sets to limit what individuals can insert, modify, or delete.
As indicated though, you can use ICMDBA to export your known good, working configuration, such that if something catastrophic occurs, you can then re-import that data. This is non-trivial, however! You would need to bring your entire ICM/UCCE system down, import the config into the loggers and AWs, and then re-initialize it so the callrouter would come up with the 'old' copy of the configuration.

Similar Messages

NT Client Configuration Updates

Running Zen 3.2. Policy packages NT client configuration does not have
tabs for the latest novell client. Is it possible to install / get
snapins that bright the Console one Policy package client configurations
up to date?

Shaun Pond has provided some Group Polcies for managing the client at cool
solutions.
http://www.zenworks.com
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCNA
Editor - http://www.ithowto.com
(Seeking Full-Time Expert? Drop me a note :> )
<[email protected]> wrote in message
news:aBpff.4268$[email protected]..
> Running Zen 3.2. Policy packages NT client configuration does not have
> tabs for the latest novell client. Is it possible to install / get
> snapins that bright the Console one Policy package client configurations
> up to date?

SCCM and Windows Update Client Configuration

Hello,
I am in the process of migrating SCCM 2007 client over to a new SCCM 2012 R2 site.
I deleted the AD site from 2007 and added it to 2012 and the client is pushed via Client Push. The client upgrades fine and things go well but
I run into a little problem after the client is installed.
Basically it seems to be an issue with how SCCM interacts with and controls Windows Update settings on the SCCM client. I ran into a somewhat of a major issue that caused
all (or many) of the newly upgraded clients to go the internet to download updates from Microsoft shortly after the move from the 2007 site and client upgrade to 2012. This was because the client (or at least the ones I checked) had their WU settings to “Always
download and install” (or something similar). Obviously, expected behavior with this setting, but the question is how did it get this way?
Does SCCM control any of these settings? I know it take over the WSUS settings, etc, but I didn’t think it does anything with the WU client itself.
From my understanding the WU client settings are done via GPO (local or domain) or WU setting and SCCM does not control these settings.
I’m not looking for you to solve the problem, because it’s quite tedious, I’m just hoping that someone can lead me in the right direction to find out what if any WU settings
are controlled or changed by SCCM 2007 or 2012.
Thanks
Angelo
Angelo

Thanks for the extra info, Idan. I should probably admit that I am an AD admin and SCCM is handled by someone else in my department. My main issue with the LocalGPO is the Event 1096 corruption that causes all admin template settings to revert
to defaults - currently happening on over 100 workstations in our environment. 100% of these problems are caused by LocalGPO corruption and nothing else. And we will pursue resolution of this issue with Microsoft because we agree that resolving
this problem is the primary goal.
But for the sake of understanding: We don't have any non-domain members that need to be managed by SCCM. If we had a policy stating "no SCCM client configurations resulting in a LocalGPO file are to be implemented in production - all are
to be done via Domain Group Policy," is it possible to eliminate the LocalGPO entirely? Or will there always be a LocalGPO file regardless of whether or not there are settings visible from it in a gpresult report? We would not need to match
SCCM configurations in Domain Group Policy because we would not make any changes to the SCCM client resulting in a LocalGPO file at all. The slow link detection is not of concern to us because none of these settings that would not apply in this case
are SCCM-managed via LocalGPO (as far as I know):
http://blogs.technet.com/b/musings_of_a_technical_tam/archive/2012/02/27/gpos-and-slow-link-detection.aspx
Another reason why I would prefer to do these settings in Domain Group Policy is that we have Advanced Group Policy Management installed in our environment, which is subject to our Change/Release process. We can track the changes being made to clients
much more easily when they are done via AGPM. Any changes that we want to make via SCCM client could be tested first to see how LocalGPO is effected, and then those changes could be made via Domain Group Policy instead in production.
Given this info, I'm still struggling to understand why it is recommended to implement anything via SCCM client configurations resulting in a LocalGPO file. So far, the only compelling reason is that management of non-domain members is not possible
via Domain Group Policy, but that doesn't apply to our environment. Is it recommended mostly for ease of administration, so that an SCCM admin doesn't need to work with another tool (Domain Group Policy)? Any extra reasoning for this recommendation
that anyone can provide is much appreciated!

How to redirect the clients software updates to the same server but different IP?

Hello Everyone,
Well our Mac expert left the company and I got promoted to take his place. I only have about 7 months experience in the Mac world and I have about 90 Macs in the company. Anyways, our company moved into a new building and the Mac server was moved which I am sure the IP address changed. The server is up and running now, but the clients cannot see it and are not allowed update their software. I didn't change any paths or settings to the server, so I am guessing it has to do with something of some IP changes. The Network team set the static IP address up for it so I could connect to it with Remote Desktop just fine. Any suggestions to a Mac rookie?
Thanks

If your clients can't find the software update server (SUS), then either the server changed DNS names and thus your CatalogURL setting is wrong, or the server was moved to a new address and your DNS services were not updated (or the DNS updates haven't propagated through all the caches quite yet).
To see the current DNS setting for the server your.software.update.server.example.com (and replace that intentionally-bogus DNS name with the DNS name for your software updare server), launch Terminal.app (Applications > Utilities) and issue the command:
dig +short your.software.update.server.example.com
and see if you get the IP address that you expect, or the old IP address, or some other address.
Software Update CatalogURL
The usual way an OS X client configures the local (target) software update server is via a plist setting:
$ sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://your.software.update.server.example.com:8088/index.sucatalog
To view the current CatalogURL setting from the plist:
$ sudo defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Details of the catalog URL setting needed varies by the version of the OS X Server; the above is for fairly recent servers. Google or Bing or DDG for the string:
/Library/Preferences/com.apple.SoftwareUpdate CatalogURL
for details on this, or check the Apple doc (see below) for details.
Background / Resources / More
Take the time to download and skim through the 10.6 Apple OS X Server 10.6 manuals (search for Mac OS X Server 10.6 to narrow what's posted); there's a lot of good information in those Apple documents, particularly given that the documentation for the more recent releases of OS X Server have gotten rather thinner. You'll find additional details of setting up software update services in those 10.6 documents; in the system imaging and software updates manual.
Also see the archives of the Mac Enterprise mailing list for related information and discussions, as well as details on tools such as Reposado.

WSUS Client delayed update detection after assigned to new group

Hello, fellow forum dwellers,
I'm experiencing some issues with my WSUS Client Management and couldn't find any answer in the library or forums. Thus I decided to write here:
Issue
When registering a new computer with WSUS and assigning a group, the updates, that have been assigned to that group aren't released to the Computer (searching will only yield the list available to the default group). After some hours (I'm currently trying
to measure just how many) suddenly the updates will become available as intended.
Why does it bother me?
That wouldn't bother me all that much for permanent clients (Using the term "client" to refer to WSUS client, independently of the actual OS type), however much of our work is spent rolling out devices to customers (who ought to receive them fully
updated). Completely non-uniform, preinstalled but non-updated hardware and OS rule out preupdated installation images unfortunately. This is putting a significant delay in our time spent on each individual device (and is sometimes putting a serious bottleneck
in our operation).
Infrastructure:
WSUS OS: Windows Server 2003 R2
WSUS Version: 3.2.7600.226
Computer-Folder Assignment: Serverside
Client-Configuration: Registry Modification (Clients are not domain members, settings are applied via Powershell Script)
Client OS: Windows 7, 8, 8.1, 2008 R2, SBS 2011, 2012
Client OS Architecture: x64 & x86
Localization: All clients & WSUS have uniform timezone and language
Any insights and help welcome :)
Cheers and thanks in advance,
Fred
There's no place like 127.0.0.1

Hello, fellow forum dwellers,
I'm experiencing some issues with my WSUS Client Management and couldn't find any answer in the library or forums. Thus I decided to write here:
Issue
When registering a new computer with WSUS and assigning a group, the updates, that have been assigned to that group aren't released to the Computer (searching will only yield the list available to the default group). After some hours (I'm currently trying
to measure just how many) suddenly the updates will become available as intended.
Why does it bother me?
That wouldn't bother me all that much for permanent clients (Using the term "client" to refer to WSUS client, independently of the actual OS type), however much of our work is spent rolling out devices to customers (who ought to receive them fully updated).
Completely non-uniform, preinstalled but non-updated hardware and OS rule out preupdated installation images unfortunately. This is putting a significant delay in our time spent on each individual device (and is sometimes putting a serious bottleneck in our
operation).
Infrastructure:
WSUS OS: Windows Server 2003 R2
WSUS Version: 3.2.7600.226
Computer-Folder Assignment: Serverside
Client-Configuration: Registry Modification (Clients are not domain members, settings are applied via Powershell Script)
Client OS: Windows 7, 8, 8.1, 2008 R2, SBS 2011, 2012
Client OS Architecture: x64 & x86
Localization: All clients & WSUS have uniform timezone and language
Any insights and help welcome :)
Cheers and thanks in advance,
Fred
There's no place like 127.0.0.1
After adding the computers to the group to get WSUS to recognize the new group you need to run the command on the client
wuauclt.exe /detectnow /resetauthorization
The /resetauthorization part is the one that makes sure the client checks to see which group it belongs to in WSUS.
The delay you are experiencing is the amount to time the client takes to "check in" with WSUS.
Hope this helps.

Some Clients Not Updating. Reporting "Compliant." hr=8007000E Error in WindowsUpdate.log

I have a significant number (but not all) of my SCCM 2012 R2 CU3 clients not updating though my SCCM software updates. On these problem clients, I get this error in WindowsUpdate.log:
"COMAPI WARNING: ISusInternal::GetUpdateMetadata2 failed, hr=8007000E"
Then these machines report "Compliant" even though they don't install the updates. Almost all of our workstations are Windows 7 SP1 32bit. We are running SCCM 2012 R2 CU3. My site servers are running Windows 2008 R2.
I don't see much in WUAhandler.log or scanagent.log. These client are however, getting my SCEP definition updates just fine. (I have an ADR for those.) And when you go out to Microsoft for security updates it works. I have tried all of the usual Windows
Updates repair suggestions (re-register dlls, rename software distribution folder, etc.) And I tried un-installing and re-installing the SCCM client on a problem PC, to no avail. I also tried using a Software Update Group with fewer updates (<100) and targeting
a problem system with only that SUG, to no avail.
Any assistance would be greatly appreciated. Thank you.

Hi all,
One of the bigger nuissances of this particular bug is that it's hard to identify from a central location that you've fallen victim to it. Without spot-checking client machines you'd be none-the-wiser. This most likely results in a lot of shops out their
thar are completely unaware they have a security issue with a false sense of "fully patched" security.
I've create the following guidelines to identify whether you are indeed one of the victims.
create a script configuration item.
Select All Windows 7 32 bit as the supported platform
Use String as the data type
Choose powershell as your script language of choice
Paste the following text in the discovery script:select-string-pattern'GetWARNING:
ISusInternal::GetUpdateMetadata2 failed, hr=8007000E'-path"$env:windir\windowsupdate.log"
Add the configuration item to a Configuration baseline
Deploy the configuration baseline to All Windows 7 32bit machines
The report list of assets by compliance state for a given baseline is a good report to check the results.
!!!! Any machines reporting compliant to this baseline have a serious issue as they won't install any software updates, yet report compliant on all !!!!
Good luck
Hi, Does the configuration item need any kind of compliance rule setup to make it work?

Wont get past "configuring updates stage 3 of 3 0%" and wont let me log into computer..HELP!!!

heres a picture of the screen i keep getting.
-HP Pavilion dv6700 as you can see its home premium
i kept getting a vista spyware alert saying i had 34 infected files and wouldn't stop and i also tried updating some things on my laptop while i updated to the new internet explorer 9. around 12noon today i rebooted my laptop to get all the updates to work and i got this configuring updates screen and was like ok. it kept going. it does it for a while, shuts down and restarts and goes back i didnt think anything was wrong made it to stage 3 and wont stop and move on from 0%. its now 10pm and its been doing it all day. ive tried shutting it down and rebooting myself but no matter what i do, it wont let me access my computer to do anything. i have avast virus protection but it said it was unable to move viruses to chest i pressed repair and it said it was postponed until next reboot so i did it this morning and figured its taking so long maybe because its trying to repair them but im sure it doesnt take 10 hours...im extremely upset. someone please help. and also, anyone know how i can get the viruses out? i dont have money for a better protection right now so im using my moms computer but she works on it so its hard. hp said they cant help because my warrenty is up, was a 1 year warrenty, got laptop in 2008 and warrenty expired in 2009. please help me.

After installing updates from Windows Update, you may get into a Reboot loop where you machines gets to “configuring updates 3 of 3. x% complete” then freezes or reboots.
Solution:
1a. Boot from the Windows System Repair Disc and choose the repair option in the lower left hand corner, choose System Restore, and select a Restore Point predating the attempted installation of the updates.
1b. If you don't have the DVD and the Vista/W7 came preinstalled on the machine, boot to the Recovery Environment using F8 at the HP logo during boot, choose "repair your computer" from the list, let RE load and do a system restore from there.
If restore fails, load the recovery environment command prompt and enter:
Del C:\Windows\winsxs\pending.xml
exit recovery environment and restart the pc, you may get 3 of 3 again but be patient, the desktop should load. Create a manual restore point and Turn off Windows Automatic updates until you can figure out which update caused the loop.
If you get it booting again:
You may be infected
Follow the order given below to disinfect your PC
1.) On a PC that is Not infected, Make a boot AV disc then boot from the disc on the Infected PC and scan the hard drive, remove any infections it finds, I prefer the Kaspersky disc myself. The New 2010 Kaspersky disc can update the AV dat files if you are connected to the internet at the time of scan and is suggested to update before the scan.
http://www.techmixer.com/free-bootable-antivirus-rescue-cds-download-list/
2.) Then boot into Windows:
Install free MBAM, run the program and go to the Update tab and update it, then go to the Scanner Tab and do a quick scan, select and remove anything it finds.
http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html
3.) When MBAM is done install SAS free version, run a quick scan, remove what it automatically selects.
http://www.superantispyware.com/download.html
These last 2 are not AV softwares like regular Anti Virus Software, they are on demand scanners that only scan for nasties when you run the program and will not interfere with your installed AV, these can be run once a day or week to ensure you are not infected. Be sure you update them before each daily-weekly scan.

Client Auto-Update questions

We just updated our Dev system to SP5 with Patch 2, but the clients are not updating automatically.
I have checked that the Client and Admin boxes are checked for auto-update and can see nowhere else that this can be done.
I double-checked with the Master Install guide, and this appears to be the only thing that I need to do to make it work.
The clients are currently at 502, and they should now be 506.
Also, is this controlled by the files in C:\BPC\Websrvr\Web\Installation?
I have checked the live server (BPC 5.1 SP3) and the Dev server (BPC 5.1 SP5r2)
Both of them have EverestClient.exe and EverestAdmin.exe with version number 12.0.0.49974
Does that seem right? I would have expected an increment in version number.
Has anyone else seen this, and can you offer any advice?
Thanks
Craig
Edited by: Craig Aucott on Feb 23, 2009 9:46 AM

Here is an extract from the note:
It does not say about the Patch! sorry...
the note is 1269662
Summary
Symptom
The Client Auto Update feature does not work in 5.1 SP5.
Other terms
auto, update, client, upgrade, install
Reason and Prerequisites
This is due to unintended consequences of fixing IM 3569686 issue in SP5.
Solution
Remove the '<remove name="Documentation"/>' node from the web.config file located in the x:\bpc\websrvr\web directory and save.
Once all clients have been updated, add the node back to the file.
The node is found in the following section:
<globalization requestEncoding="utf-8" responseEncoding="utf-8"/>
<webServices>
       <protocols>
            <add name="HttpSoap"/>
            <add name="HttpGet"/>
            <add name="HttpPost"/>
            <remove name="Documentation"/>
        </protocols>
</webServices>
Header Data
Release Status:     Released for Customer
Released on:     25.11.2008 19:51:41
Master Language:     English
Priority:     Correction with high priority
Category:     Program error
Primary Component:     EPM-BPC-MS-SVM-OTH Other
Hope this helped
Bye

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.

The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

Windows 8 clients not updating via SCCM?

I am running Windows Server 2012 R2 and SCCM 2012 R2 (v5.0.7958.1000) and am trying to deploy updates to a Windows 8.1 client but am not having any joy, I keep getting errors within the WindowsUpdate.log.
Can deploy updates to Windows 7 machines okay but not Windows 8.1.
An extract of the log can be found here http://1drv.ms/1aJm3VO
www.techielass.com

logs seems to be good .you can check other logs like wuahandler.log ,updatesdeployment.log . Read the blog post how to troubleshoot software update issues http://eskonr.com/2015/04/sccm-2012-troubleshoot-client-software-update-issues/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

Login not working after configuration update

I have a Pavilion g6-2235us running Windows 8 Metro. Yesterday afternoon my screen said "System Configuration/Updates in progress ... do not power off" This morning when I turned on my laptop ... it went to the metro login screen name and when I entered my password ...it said Welcome then went back to the login screen. Tried this a few times with the same results.
Also, my Admin user name was gone and when I booted to "Recovery" there were no restore points.
Any ideas as to what happened? If I do a backup to my external HD then reset to defaults .... can I recover my backup files once I'm logged backin?
Thank for your help!
Joe

There are some ways you can recover your password and there are some 3’rd party S/W’s that may work. One way to do it is to follow the link below even though the steps are for Windows 7 it should work in 8 too.
http://www.howtogeek.com/96630/how-to-reset-your-forgotten-windows-password-the-easy-way/
And you can also try to do it using a 3’rd party S/W at your own risk it may or may not work but it’s worth a try if your data is really important. This video has all the info abt it.
http://www.youtube.com/watch?v=40zDUCoysr0
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Issue with client configuration for CuciLync 9.2.5

Hi,
we are currently preparing the client configuration for CuciLync 9.2.5.
When CuciLync starts we don't want to see the CuciLync window in the foreground.
Therefore we use the 'hubvisible' setting.
%APPDATA% \Cisco\Unified Communications\Jabber\CSF\Config\jabberLocalConfig.xml
<userConfig name="hubvisible" value="FALSE"/>
In addition we use this setting in the file
ProgramFiles%\Cisco Systems\CUCILync\jabber-config-defaults.xml
At first it looks like that the setting works fine.
But CuciLync always resets 'hubvisible' to 'true'.
Any idea what needs to be done to ensure that the setting is not overwritten ?
Thanks in advance for your feedback
Best Regards
Carsten Lucy

that might help
http://mysite.voicebootcamp.com/index.php/free-video-labs/video/uc-collaboration-ccie-collaboration-chapter-4-1-voice-gatew

Oracle 11g client Configuration

Hi All,
I have Oracle 11g Server installed on my Linux box.
I want to use Oracle client 11g on my windowsXP access to the Server that on my linux box.
when i go to "Oracle-oraClient11g_home1","Configuration and Migration Tools", "Administration Assistant for Windows". I couldn't find the server that i want to add.
Here is my client configuration on my windowsXP:
tnsnames file
# tnsnames.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = "myoracle server name")(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
listener file:
# listener.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = "it's my client Machine")(PORT = 1521))
Sqlnet file:
# sqlnet.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
My windowXp is joined to the domain (ex. zzz domain).
Anyone who know and can help me about this, it will great.
Thanks to forum.
Marin

1. On your Oracle client side, you don't need listener.ora file
2. If you want to configure TNS Names on client, you run "Net Configuration Assistant" not "Administration Assistant for Windows"
3. You will not see a server drop down list like SQL Server did. No matter your join the domain or not. You need to enter the server hostname, port and Service name manually.

AW client configuration updates

Similar Messages

Maybe you are looking for