Axes problem on chart scrolling

Hi,
first of all sorry for my English!
Well, i'm developing the scrolling of a chart: i mean, if i drag a chart, i can move around it while the axes just remain where they are: this is to navigate the chart when the start/end values are greater than the axes limits (both X y Y axes).
The technique is simple: i just calculate the "delta" of the mouse when draggin (converting the x/y mouse coordinate in a chart value x/y coordinate) and changing the min/max values of the axes.
The problem is with the movement on the vertical axis.. when i move the graph, i don't have a fixed label at the top of the vertical axis, but the labels move as i move the graph.. in this way, i don't always have a label at the very top of the vertical axis, and the desappearing/appearing of the labels make the graph "dancing".. is like the appearing of the next label for the axis make the axis/chart length change for a moment, or make the movement larger than really is.. this doesn't happen with the horizontal axis, even if the labels move and i don't have a label at the very end/beginning of the axis..
It is a little hard to explain, i hope i've been clear..
I don't know hot to fix it.. i was wondering if there is a way to put a value label at the very top/end of an axis no matter the maximum/minimum value of the displayed chart and no matter the distance from all the other labels in the axis.
Well, thanks for reading all this and i hope someone can help me, it is an urgent thing.
Danilo

Thanks but.. i can't see the way to solve, this way... if i have, on the vertical axis, the labels 0, 100, 200, 300, 400.. and i start dragging.. when i have the max value for that axis = 460, for example.. i go on seing only the labes 100, 200, 300, 400.. and in the label funcion i only get this four values.. i'd like, in this case, to show 460 too.. i mean, i'd like to show always the max value of the axis (and the minimum one).. i think this way i should solve..)..
I can see that setting a lower "interval" value on the LinearAxis help a bit.. but this is not the way i want to solve the problem.
Thanks

Similar Messages

  • Problems with Charts

    I make an application with Apex 2.2. It works fine.
    I've tried to export app and import to Oracle XE.
    It works but I've a problem with the charts: they are all empty!
    For example, I make a cluster bar chart with one series:
    select *
    from table(cast(portal_pk_report_vendite.f_chart_shops_line(:P1_TIPI_ANALISI, 0,9,:APP_USER) as portal_table_graph))
    The query call a procedure that return an object table with the following columns:
    link
    description
    value
    The chart is always empty.
    If I manually force the parameters it works and data returned:
    select *
    from table(cast(portal_pk_report_vendite.f_chart_shops_line(40, 0,9,10) as portal_table_graph))
    It seems that it's not able to passa values to chart.
    Doing chart debug, items were correctly initialized.
    It appens with all charts of any kind.
    Any ideas?

    I know that there aren't differences between Apex ad XEAndrea,
    Oracle Application Express (APEX) is a hosted declarative development environment for developing and deploying database-centric Web applications. XE is a free version of the world's most capable relational database Oracle 10g Release 2 (10.2). So difference is huge!
    APEX can run (depending on version) on different Oracle database editions (XE, SE, SEO and EE).
    You have problem if your application running on APEX on XE and not if running on APEX on SE, SEO or EE. Am I right?
    Question is does it really database (XE) making you problems with charts (what has not much sense to me) or APEX itself?

  • Problem with chart design

    Hi
    I am experiencing a problem with the output of a line chart that I am creating in APEX. Its labels (X-axis) are dates, but they do not seem to fit entirely into the lenght of the x-axis (all the ones that I have ordered in the sql expression). Also, I needed to place these dates in a vertical position, for which I cannot find any parameter. The sql is as follows:
    select null link, DATA_REGISTO label, Total value
    from (select DATA_REGISTO, TOTAL_SEQ_URGENCIA as Total FROM "ANDRE"."HTIDISTSIMPLIF"
    where
    DATA_REGISTO = '06.01.01'
    or DATA_REGISTO = '06.01.08'
    or DATA_REGISTO = '06.01.15'
    or DATA_REGISTO = '06.01.22'
    or DATA_REGISTO = '06.01.29'
    or DATA_REGISTO = '06.02.05'
    or DATA_REGISTO = '06.02.12'
    or DATA_REGISTO = '06.02.19'
    or DATA_REGISTO = '06.02.26'
    or DATA_REGISTO = '06.03.05'
    or DATA_REGISTO = '06.03.12'
    or DATA_REGISTO = '06.03.19'
    or DATA_REGISTO = '06.03.26'
    or DATA_REGISTO = '06.04.02'
    or DATA_REGISTO = '06.04.09'
    or DATA_REGISTO = '06.04.16'
    or DATA_REGISTO = '06.04.23'
    or DATA_REGISTO = '06.04.30'
    or DATA_REGISTO = '06.05.07'
    or DATA_REGISTO = '06.05.14'
    or DATA_REGISTO = '06.05.21'
    or DATA_REGISTO = '06.05.28'
    or DATA_REGISTO = '06.06.04'
    or DATA_REGISTO = '06.06.11'
    or DATA_REGISTO = '06.06.18'
    or DATA_REGISTO = '06.06.25'
    or DATA_REGISTO = '06.07.02'
    or DATA_REGISTO = '06.07.09'
    or DATA_REGISTO = '06.07.16'
    or DATA_REGISTO = '06.07.23'
    or DATA_REGISTO = '06.07.30'
    or DATA_REGISTO = '06.08.06'
    or DATA_REGISTO = '06.08.13'
    or DATA_REGISTO = '06.08.20'
    or DATA_REGISTO = '06.08.27'
    or DATA_REGISTO = '06.09.03'
    or DATA_REGISTO = '06.09.10'
    or DATA_REGISTO = '06.09.17'
    or DATA_REGISTO = '06.09.24'
    or DATA_REGISTO = '06.10.01'
    or DATA_REGISTO = '06.10.08'
    or DATA_REGISTO = '06.10.15'
    or DATA_REGISTO = '06.10.22'
    or DATA_REGISTO = '06.10.29'
    or DATA_REGISTO = '06.11.05'
    or DATA_REGISTO = '06.11.12'
    or DATA_REGISTO = '06.11.19'
    or DATA_REGISTO = '06.11.26'
    or DATA_REGISTO = '06.12.03'
    or DATA_REGISTO = '06.12.10'
    or DATA_REGISTO = '06.12.17'
    or DATA_REGISTO = '06.12.24'
    or DATA_REGISTO = '06.12.31'
    order by DATA_REGISTO)
    How can I do this?
    Thanks in advance
    Andre

    Hi Frank,
    I'm creating some SEM Management Cockpit, the problem I faced is not the BEx Query itself, but the pie chart design and display. I have processed my data in advance, so there a only 5 values in my query at a time, and these area values are not constant values. If I don't mark a selection criteria, it will display a full pie in Management Cockpit.
    And if I browse the query in IE directory, I can get a desired pie chart by "Swap Axes", so I think maybe there is a same choose in Management Cockpit.
    Thank you and Best Regards,
    Rocket

  • Problem With Chart (Members Name)

    Hi Experts
    We are facing the one new issue in FR as well as HFM. we are using the data bast to HFR is HFM.While we are creating the HFM application Profile we used the Period's Lables as January ,febuary.....,.we catching the same in HFR also it good.
    But at one stage (trend reports) we have to generate the reports including with charts and both (*grid and Chart should be in one page only*). here we are facing the problem the report made up two col's (year & Period) and one row(Scenario).If we check the chart to show the Horizontal value like January 2007,February2007 and so on . so that the system will covers morespce and grid will moves next page but we need both in one single page.
    Any suggestions on this Its cery Urgent
    Regards
    Rao

    There are several options:
    Try formatting that axis to have the month names at an angle.
    Use the member name instead of description for months.
    Don't show the year.
    Change the axis that months are on, or pivot the grid (rows to columns).

  • Problem Using The Scroll Wheel In Itunes 7.4.3.1

    I cannot use the scroll wheel since I installed this version of iTunes on Vista. Has anyone experience this problem and did you find a solution?

    Found a solution now for me - I deinstalled MS IntelliMouse, now it works!
    See here: http://support.microsoft.com/kb/828677/en-us

  • N86 Web problems can't scroll down

    I am hoping someone might be able to help me. I have an N86 and just upgraded the firmware to the newest release. I am having a problem with the web. It will not allow me to scroll down past a text input box. For example I tried to go to T-mobile.com and I can scroll down to the search box part of the page but can not get past that part whether or not I enter a search word. The cursor gets stuck in the search box even though I did not click on it to enter a search word. It was the same before updating the firmware. Anyone have any ideas? Does anyone also know if it's possible for me to get the web program from my N96 and install it on my N86? The N96 web is so much better than the N86's. The N96's web browser gives you the option to shrink the entire page or to zoom in on the page. It also has autofind for phone numbers, email addresses etc. The N86's web doesn't have anything like that, it's horrible.

    Here's an option before taking your bb apart.  Squirt some Windex on a paper towel. Not much, say less than your thumbprint. Wrap it around your thumb.  Scroll left, right, up and down for 30 seconds or so each direction.  The cleaner coats the trackball .... the friction cleans the underlying elements.  Hey, I'm not joking. Worked for me.  Patent pending.  (NOW, I'm joking!)  Hope this helps someone.

  • Problem with chart line

    Hello,
    I want to add a series to my chart of type line.
    My first series is
    select
    'f?p=26010:101:'||:app_session||'::NO::P101_DATE:'||
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt) link,
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt) dt,
    sum(nvl(stk.for_stock_qty,0)) Qty
    from
    atestjr_stocks stk
    where
    trunc(stk.move_dt) between trunc(to_date(:P7_from_dt,'dd/mm/yyyy')) and
    trunc(to_date(:p7_to_dt,'dd/mm/yyyy')) and
    ( :p7_move_txt is null or INSTR( :p7_move_txt, stk.stock_move_typ)!= 0) and
    ( :p7_site_txt is null or INSTR( :p7_site_txt, stk.bp_site_id)!= 0)
    group by
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt)
    order by
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt)
    My second series is
    select
    'f?p=26010:101:'||:app_session||'::NO::P101_DATE:'||
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt) link,
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt) dt,
    sum(nvl(stk.unav_stock_qty,0)) qty
    from
    atestjr_stocks stk
    where
    trunc(stk.move_dt) between trunc(to_date(:P7_from_dt,'dd/mm/yyyy')) and
    trunc(to_date(:p7_to_dt,'dd/mm/yyyy')) and
    ( :p7_move_txt is null or INSTR( :p7_move_txt, stk.stock_move_typ)!= 0) and
    ( :p7_site_txt is null or INSTR( :p7_site_txt, stk.bp_site_id)!= 0)
    group by
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt)
    order by
    decode(:P7_PERIOD_SW,'DD',to_char(stk.move_dt,'dd/mm/yyyy'),
    'WW',to_char(stk.move_dt,'iw/yyyy'),
    'MM',to_char(stk.move_dt,'mm/yyyy'),
    stk.move_dt)
    The first series work but when I tried to add the second, I see nothing in my graph.
    Someone have an idea of the problem ?
    Thanks in advance

    I found my problem,
    It's the order by, I just remove it and I see my two lines.

  • Problem with Chart of depreciation-Urgent

    Hi
    while assigning chart of depreciation to company code,
    The following message is coming
    Inconsistency between FI company code XXX and chart of deprec. XXXX
    Message no. AC481
    Diagnosis
    You tried to assign chart of depreciation XXXX to company code XXXX. According to its Customizing definition, this company code manages parallel currencies.
    The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
    System Response
    This assignment is not possible.
    Procedure
    1. Check the currency types of the company code.
    2. Specify a corresponding depreciation area for each currency type.</b>
    Please help how toi solve
    Thanks
    tarak

    Hi,
    your problem (apparently) is that the Company Code manage 2 currencies, in this case, I think that you should configure a depreciation area in order to manage the valuation of the asset in the alternative currency. I think that SAP provides a standard depreciation area that you can copy.
    I know that this is not a solution, but I hope this helps
    Regards

  • Problem with chart displaying data correctly

    I have created a bar chart that displays data for each day of the month. The majority of the time this chart displays the information corrrectly. However now and again the bars of the chart appear much larger than they should meaning that instead of showing 30 or 31 seperate bars it can only display half that amount due to the increased size of the bars. If you display the same chart again then the problem will often disappear.
    I am using Coldfusion MX 7 version 7.0.2 Enterprise Edition. Ihave installed all the latest updates up to Cumulative Hot Fix 3.

    Hi,,
    I have checked that the data being passed is correct and it seems to be. Chart code below.
    Thanks
    <cfchart chartwidth="700"
       chartheight="300"
       pieslicestyle="solid"
       show3d="no"
       showlegend="no"
       fontsize="12"
       xoffset="0.0"
             yoffset=".0">
    <cfchartseries type="bar"
       query="chartquery"
       serieslabel="Date_Accessed"
       valuecolumn="namecount"
                itemcolumn="date_created">
        </cfchart>

  • Problem with Chart display in WAD

    Hi All,
      We have a Web Report in which we want to display the data in <b>table</b> format and also in <b>chart</b> format. We have two tabs : Data display and Chart display.
    In Data display tab we want the data in table format and in the Chart display tab we want the data in Chart format.
    Problem we are facing is that we are getting both table and chart displayed in the Data display tab. We want only the table in this tab and want to hide the chart which is coming there.
    Please help me on this.
    Thanks in advance,
    Prakash

    Try to use hide an unhide commands:
    <a  href="<SAP_BW_URL ITEM='GR' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1&MULTI=X&HIDDEN=''>
    In this example, all Items containing GR are hidden and in a second step, all Items containig GR1 are displayed.
    Regards,
    Beat

  • Problem with chart/grap​h multiple scales

    I have a chart with multiple scales. If I turn the visiblity off for some of the scales and then turn them back on they are not in the correct order on the chart. I have attached a program that I used to recreate the problem.
    Please advise.
    Thanks
    Attachments:
    Possible_bug.vi ‏36 KB

    The only solution I can think of is to make all the scales invisible then make them visible in the order you want. I have modified your code to do this and added code to speed up the processing by disabling the front panel updates.
    Attachments:
    LV61_Possible_bug[1].vi ‏56 KB

  • Problem with chart : LV 7.1, 8.6 and 2010

    Hello
    I have a problem when I am trying to plot a 2d array in a chart with stacking plots. The LV crashes (the 2010 just disappears, 8.6 is saying that there is a problem...) . I get this problem on two different computers with all versions I have LV 7.1, 8.6 and LV 2010. Please find attached here a demo vi showing the problem (one for LV 8.6 and the same in LV 2010).
    Run the vi, then select stacking plot, expand the Legends and try to write a name for the new Y scale (then please tell me what is going on).
    thanks
    N
    Attachments:
    test_2D.vi ‏10 KB
    test_2D_LV10.vi ‏12 KB

    Hello,
    I don't understand what happen on your computer because I downloaded your vi (LV2010) and I followed the steps and I could change all the Y scale and all the others properties.
    Could you try to run the different steps on a computer where only LabVIEW 2010 or LabVIEW 8.6 is installed?
    David S.| Certified LabVIEW Associate Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Journées Techniques LabVIEW 2012 : du 27 septembre au 22 novembre
    2 sessions en parallèle : Débuter a...

  • Problem with chart width

    Hi all,
    I have a problem with a chart.
    I show a columnChart at 100% width.
    The dataprovider is hierarchic. So every object in it has a 'children' property which is a new ArrayCollections.
    This way, I'm able to descend in the hierarchy by scripting this:
    targetChart.dataProvider = myClickedItem.children;
    All works perfect except that the larger the dataset is, the narrower my chart displays.
    This is what it looks like (from left to right, the several levels of the chart):
    This is the mxml code I use:
    <mx:ColumnChart id="targetChart" width="100%" height="100%"
                                                      dataProvider="{targetProvider}" showDataTips="true"
                                                      itemClick="targetChart_itemClickHandler(event)"
                                                      type="{statStyle}">
      <mx:horizontalAxis>
                                       <mx:CategoryAxis categoryField="label"/>
      </mx:horizontalAxis>
      <mx:series>
                                  <mx:ColumnSeries yField="total" width="100%"
                                                                           fillFunction="getTotalFill"
                                                                           displayName="Totaal ovsg"
                                                                           showEffect="zoom" hideEffect="zoom"/>
                                  <mx:ColumnSeries yField="count" width="100%"
                                                                           fill="{Config.CHART_COLOR_ARRAY.getItemAt(0) as IFill}"
                                                                           displayName="Telling"
                                                                           showEffect="zoom" hideEffect="zoom"/>
      </mx:series>
      </mx:ColumnChart>
    Any help would be appreciated.
    Dany

    Hi,
    Did you solve this issue?
    I have the same problem, maybe you can help if you got the answer?

  • Problem with Java scrolling text window on Mac OS

    The Java scrolling text window created by AWT "TextArea" scrolls in the normal way from the top on Windows, whereas it scrolls from the bottom on the Mac OS. That is, the text file is first displayed from the bottom on Mac, so that the user has to scroll to the top of the file each time a new page is opened, which is a very nuisance. Have you run into this problem and do you know how to over-ride the Mac OS default? Many thanks.

    TextAreas suck in general, this has been discussed many time in the forum. As a duct-tape fix, you might play around with setCaretPosition() after inserting your new text. Good luck

  • Problem with Horizontal Scroll on java.awt.List

    I use the same code for a General Application as a CDC Application.
    I have no problem at all with the General Application but on the CDC I can't scroll to the right (horizontal).
    Why do I get this problem on the CDC application and not on a regular application?
    I use the PP-1.0 Profile for the CDC application. Does it not support horizontal scroll on java.awt.List?
    This is the code:
    * Main.java
    * Created on den 22 augusti 2007, 10:52
    package cdcapplication6;
    * @author  Erik Rothman
    public class Main extends java.awt.Frame {
        /** Creates new form Main */
        public Main() {
            initComponents();
              for (int i = 0; i < 10; i++) {
                   list1.add("Short text");
                   list1.add("Some very long text indeed. Some very long text indeed.");
        /** This method is called from within the constructor to
         * initialize the form.
         * WARNING: Do NOT modify this code. The content of this method is
         * always regenerated by the Form Editor.
        // <editor-fold defaultstate="collapsed" desc=" Generated Code ">                         
        private void initComponents() {
            list1 = new java.awt.List();
            addWindowListener(new java.awt.event.WindowAdapter() {
                public void windowClosing(java.awt.event.WindowEvent evt) {
                    exitForm(evt);
            add(list1, java.awt.BorderLayout.CENTER);
            pack();
        }// </editor-fold>                       
        /** Exit the Application */
        private void exitForm(java.awt.event.WindowEvent evt) {                         
            System.exit(0);
         * @param args the command line arguments
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    new Main().setVisible(true);
        // Variables declaration - do not modify                    
        private java.awt.List list1;
        // End of variables declaration                  
    }

    I use the same code for a General Application as a CDC Application.
    I have no problem at all with the General Application but on the CDC I can't scroll to the right (horizontal).
    Why do I get this problem on the CDC application and not on a regular application?
    I use the PP-1.0 Profile for the CDC application. Does it not support horizontal scroll on java.awt.List?
    This is the code:
    * Main.java
    * Created on den 22 augusti 2007, 10:52
    package cdcapplication6;
    * @author  Erik Rothman
    public class Main extends java.awt.Frame {
        /** Creates new form Main */
        public Main() {
            initComponents();
              for (int i = 0; i < 10; i++) {
                   list1.add("Short text");
                   list1.add("Some very long text indeed. Some very long text indeed.");
        /** This method is called from within the constructor to
         * initialize the form.
         * WARNING: Do NOT modify this code. The content of this method is
         * always regenerated by the Form Editor.
        // <editor-fold defaultstate="collapsed" desc=" Generated Code ">                         
        private void initComponents() {
            list1 = new java.awt.List();
            addWindowListener(new java.awt.event.WindowAdapter() {
                public void windowClosing(java.awt.event.WindowEvent evt) {
                    exitForm(evt);
            add(list1, java.awt.BorderLayout.CENTER);
            pack();
        }// </editor-fold>                       
        /** Exit the Application */
        private void exitForm(java.awt.event.WindowEvent evt) {                         
            System.exit(0);
         * @param args the command line arguments
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    new Main().setVisible(true);
        // Variables declaration - do not modify                    
        private java.awt.List list1;
        // End of variables declaration                  
    }

Maybe you are looking for