Axis deployment endpoint
Hi,
I had created a .wsdd file and use AdminClient to deploy the webservice on my web server. The problem is that after deployment i could not get the wsdl endpoint address to point to my web server's domain hostname(e.g. www.domain.com:8080), it always generate the host 'localhost'.
I had tried
java -cp %axisclasspath%;. org.apache.axis.client.AdminClient -lhttp://www.domain.com:8080/axis/services/MyService deploy.wsdd
but it gave me "(401)unauthorized". Am i missing something? Had been experimenting and searching for clues but in vain.. How do you change the endpoint?
Thanks in advance!
Regards,
Stanly
Your command is probably correct but the AdminService doesn't (by default) allow remote administration of web services.
If you need remote access to the AdminService you have to change the configuration in your server-config.wsdl in the webapp. See http://ws.apache.org/axis/java/user-guide.html under the section "Remote Administration" for a description on what to change.
BTW, the server-config.wsdl was not present in WEB-INF in the distribution that I used (axis 1.0) so I had to manually exctract the file from the axis.jar and place it under WEB-INF.
Similar Messages
-
Deploy Endpoint Protection while using another AntiVirus application?
Dear friends
I'm configuring SCCM 2012R2 in our network,my question is Do I need to deploy Endpoint Protection to clients while we using Kaspersky Endpoint Security in the perimeter ,actually I installed SCEP but not sure if there is any Conflict between these two programs,or
any advantage might it have...?!
Thanks
Reza HadadHI,
I wouldn't use two anti-viruses as a permanent solution. I have used two at the same time during migration scenarios, installting SCEP, when it reports back that it is installed succesfully, put it in a a collection and uninstall the old Antivirus.
I have done it this way a couple of times and I haven't had any co-existence problems.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Problem with Axis Adapter endpoint url in WSDL file.
Dear experts,
We are using PI 7.1 ehp1 with a SOAP to RFC scenarios using the Axis adapter.
We have the XIAxisAdapter as sender Communication Channel and the related Sender Agreement.
When i am looking into the WSDL file of the Sender Agreement than the endpoint contains ...location="host:port/ XISOAPAdapter /MessageServlet"... in stead of ...location="host:port/ XIAxisAdapter /MessageServlet"...
The url with "XISOAPAdapter " will not work. When i export the WSDL file and manually adjust the location to "XIAxisAdapter " everything works fine.
Is it possible to directly generate a correct WSDL with calling the url http://host:50000/dir/wsdl?p=xxxx?
Thanks in advance!
Best regards,
Joost WeghorstHi Sonya,
You can use configuration plan while deploying composite.
The configuration plan enables you to define the URL and property values to use in different environments. During process deployment, the configuration plan is used to search the SOA project for values that must be replaced to adapt the project to the next target environment.
Please refer this doc. for getting introduced to config plan.
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE10908
To deploy soa composite with config plan refer this doc:
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE85469 -
Error while invoking a webservice using Axis deployed in tomacat from Bpel
Hi,
I am trying to invoke a Axis webservice(from Java class to WSDL- bottom up java bean webservice approach) developed in Exclipse IDE, deployed in Tomcat.
When i am trying to invoke the service, from Bpel from Jdeveloper it is throwing error as such :
Invoke_1 (faulted)
[2009/05/22 14:32:18] Faulted while invoking operation "storeLoanData" on provider "LoanDataPersist".less
-<messages>
-<input>
-<Invoke_1_storeLoanData_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="p_request">
-<p_request xmlns="" xmlns:def="http://dtos.demo.com" xsi:type="def:LoanDataPersistRequest" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<customerName>wew
</customerName>
<netIncome>12
</netIncome>
<loanAmount>12
</loanAmount>
<realEstateAddress>wew
</realEstateAddress>
<customerID/>
</p_request>
</part>
</Invoke_1_storeLoanData_InputVariable>
</input>
-<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>exception on JaxRpc invoke: trailing block elements must have an id attribute
</summary>
</part>
</remoteFault>
</fault>
</messages>
I may add that, the WSDL generated is using "soap:enc:array ", rpc style.
Can anyone tell me the reason and suggest .Hi Marc,
Thanks for the guidancer. But sir, i am unable to detect at which place i have to do the required changes.I found p_request as a parameter in the method only in the interface only.
As bcos ultimately , i am generating the tomcat /axis web service (WSDL) from the java class, which is using 2 Request and response java bean, in which they are doing someing like this:
private static org.apache.axis.description.TypeDesc typeDesc =
new org.apache.axis.description.TypeDesc(LoanDataPersistRequest.class, true);
static {
typeDesc.setXmlType(new javax.xml.namespace.QName("http://dtos.demo.com", "LoanDataPersistRequest"));
org.apache.axis.description.ElementDesc elemField = new org.apache.axis.description.ElementDesc();
elemField.setFieldName("customerName");
elemField.setXmlName(new javax.xml.namespace.QName("", "customerName"));
elemField.setXmlType(new javax.xml.namespace.QName("", "string"));
elemField.setNillable(true);
etc etc...................}
And second thing is when the WSDL is generated, from that the stubs and skeletons is generated to test the service.
There in the Stub i found out "p_request" in this place:
private static void _initOperationDesc1(){
org.apache.axis.description.OperationDesc oper;
org.apache.axis.description.ParameterDesc param;
oper = new org.apache.axis.description.OperationDesc();
oper.setName("storeLoanData");
param = new org.apache.axis.description.ParameterDesc(*new javax.xml.namespace.QName("", "p_request")*, org.apache.axis.description.ParameterDesc.IN, new javax.xml.namespace.QName("http://dtos.demo.com", "LoanDataPersistRequest"), com.demo.dtos.LoanDataPersistRequest.class, false, false);
oper.addParameter(param);
oper.setReturnType(new javax.xml.namespace.QName("http://dtos.demo.com", "LoanDataPersistResponse"));
oper.setReturnClass(com.demo.dtos.LoanDataPersistResponse.class);
oper.setReturnQName(new javax.xml.namespace.QName("", "storeLoanDataReturn"));
oper.setStyle(org.apache.axis.constants.Style.RPC);
oper.setUse(org.apache.axis.constants.Use.ENCODED);
_operations[0] = oper;
And in skeleton :
static {
org.apache.axis.description.OperationDesc _oper;
org.apache.axis.description.FaultDesc _fault;
org.apache.axis.description.ParameterDesc [] _params;
_params = new org.apache.axis.description.ParameterDesc [] {
new org.apache.axis.description.ParameterDesc(*new javax.xml.namespace.QName("", "p_request")*, org.apache.axis.description.ParameterDesc.IN, new javax.xml.namespace.QName("http://dtos.demo.com", "LoanDataPersistRequest"), com.demo.dtos.LoanDataPersistRequest.class, false, false),
oper = new org.apache.axis.description.OperationDesc("storeLoanData", params, new javax.xml.namespace.QName("", "storeLoanDataReturn"));
_oper.setReturnType(new javax.xml.namespace.QName("http://dtos.demo.com", "LoanDataPersistResponse"));
_oper.setElementQName(new javax.xml.namespace.QName("urn:com.demo.service", "storeLoanData"));
_oper.setSoapAction("");
myOperationsList.add(oper);
if (_myOperations.get("storeLoanData") == null) {
_myOperations.put("storeLoanData", new java.util.ArrayList());
((java.util.List)_myOperations.get("storeLoanData")).add(_oper);
PLease suggest if i make some changes in stub and skeleton how it would reflect the WSDL... or else please suggest where shud i do the required changes. -
Deploy Endpoint Protection for 40+ laptops
Hey there smart people! I am in the process of bringing 40+ laptops out of workgroup mode onto the domain, and want to design a security solution for them other than named AV accounts. I've worked with SC products before but in a Dev environment,
not production. I'm concerned with the cost of a full-blown system center deployment to manage 40+ roaming laptops and a dozen servers.
Security Essentials, however, is not licensed for businesses with more than 10 machines, so I need to figure out the best way to manage these things. Windows In-Tune has been brought up as a solution as well.
If I go with a self-managed solution like SCCM Endpoint Production, what products do I need to license and manage?
Thanks,
JoeConfigMgr is way too much for what you want. You can buy Intune licenses for $7/month per user. I have an Intune Guide here. You can see how easy it easy to deploy and manage.
http://www.gerryhampsoncm.blogspot.ie/2013/05/windows-intune-step-by-step-guide.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
AXIS - deploying services implemented as dynamic proxy.
I have web services defined in interfaces Service1, Service2, Service3 deployed using a deploy.wsdd that contains the class names Impl1, Impl2, Impl3 that implements their respective interfaces.
What I want to do now is to replace Impl1, Impl2, Impl3 with instances of dynamic proxy classes that I will create using my factory.
I just want to tell Axis something like:
Implement each service by calling
Class MyFactory.getImpl(Class serviceInterface).
How can I tell Axis to do that?I have web services defined in interfaces Service1, Service2, Service3 deployed using a deploy.wsdd that contains the class names Impl1, Impl2, Impl3 that implements their respective interfaces.
What I want to do now is to replace Impl1, Impl2, Impl3 with instances of dynamic proxy classes that I will create using my factory.
I just want to tell Axis something like:
Implement each service by calling
Class MyFactory.getImpl(Class serviceInterface).
How can I tell Axis to do that? -
InvocationTargetException in AXIS deployment
I am trying to deploy a web service. I can successfully deploy if the remote interface method definition is like this.
public interface SoapServer extends java.rmi.Remote {
public int addDevice(String in0) throws java.rmi.RemoteException;
but If I change the method definitation of this
public interface SoapServer extends java.rmi.Remote {
public int addDevice(Device in0)throws java.rmi.RemoteException;
Here you can see the argument is changed to a user define class. All classes are in same package and while deploying the serverc I am getting the following errors.
Processing file deploy.wsdd
Exception: AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.lang.reflect.InvocationTargetException
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:java.lang.reflect.InvocationTarg
etException
at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder
.java:222)
at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.
java:129)
at org.apache.axis.encoding.DeserializationContext.endElement(Deserializ
ationContext.java:1087)
at org.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1403)
at org.apache.xerces.validators.common.XMLValidator.callEndElement(XMLVa
lidator.java:1550)
at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.disp
atch(XMLDocumentScanner.java:1149)
at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentS
canner.java:381)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)
at javax.xml.parsers.SAXParser.parse(Unknown Source)
at org.apache.axis.encoding.DeserializationContext.parse(Deserialization
Context.java:227)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnders
tandChecker.java:62)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
at org.apache.axis.client.Call.invoke(Call.java:2767)
at org.apache.axis.client.Call.invoke(Call.java:1792)
at org.apache.axis.client.AdminClient.process(AdminClient.java:439)
at org.apache.axis.client.AdminClient.process(AdminClient.java:404)
at org.apache.axis.client.AdminClient.process(AdminClient.java:410)
at org.apache.axis.client.AdminClient.process(AdminClient.java:320)
at org.apache.axis.client.AdminClient.main(AdminClient.java:463)
{http://xml.apache.org/axis/}hostname:Test
Please help me ASAP.
I am available on msn so you can contact me on the same. My id is
[email protected]
Thanks in advancelearn some manners first.
Your request is NOT any urgent to anyone except you, saying it is is suggesting you're more important than others which is very rude.
Requesting private help rather than having answers provided here is also very rude. -
Hi everybody!
I am new to webservices and therefore I am trying to deploy an example webservice using Axis' Admin Client.
Here is the statement I am trying to execute:
java -cp %AXISCLASSPATH% org.apache.axis.client.AdminClient -l http://localhost/
axis/services/AdminService SimpleDVDStoreDeploy.wsddAXISCLASSPATH looks this way:
c:\axis\lib\axis.jar;c:\axis\lib\commons-discovery.jarUnfortunately I am always getting the following exception:
Exception in thread "main" java.lang.NoClassDefFoundError: axis/org/apache/axis/
client/AdminClientCan anyone help me?
I am really stuck! :(
Thanks in Advance!
StefOf course the exception looks like:
Exception in thread "main" java.lang.NoClassDefFoundError: /org/apache/axis/
client/AdminClientSorry for the confusion... -
Problem deploying document style web service(urgent help required)
I am getting this particular exception on my browser when I am trying to view the list of services after having deployed the service. The exception and complete stack trace is follows. I have also included the portion of the WSDD file giving details about the service.
And now... Some Services
AXIS error
Sorry, something seems to have gone wrong... here are the details:
Exception - org.apache.axis.ConfigurationException: java.lang.ClassCastException
java.lang.ClassCastException
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.makeNewInstance(WSDDDeployableItem.java:302)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:274)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getHandler(WSDDDeployment.java:394)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:276)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDChain.makeNewInstance(WSDDChain.java:125)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:274)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDService.makeNewInstance(WSDDService.java:430)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getDeployedServices(WSDDDeployment.java:503)
at org.apache.axis.configuration.FileProvider.getDeployedServices(FileProvider.java:296)
at org.apache.axis.transport.http.AxisServlet.reportAvailableServices(AxisServlet.java:482)
at org.apache.axis.transport.http.AxisServlet.doGet(AxisServlet.java:260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:534)
org.apache.axis.ConfigurationException: java.lang.ClassCastException
java.lang.ClassCastException
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.makeNewInstance(WSDDDeployableItem.java:302)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:274)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getHandler(WSDDDeployment.java:394)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:276)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDChain.makeNewInstance(WSDDChain.java:125)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:274)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDService.makeNewInstance(WSDDService.java:430)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getDeployedServices(WSDDDeployment.java:503)
at org.apache.axis.configuration.FileProvider.getDeployedServices(FileProvider.java:296)
at org.apache.axis.transport.http.AxisServlet.reportAvailableServices(AxisServlet.java:482)
at org.apache.axis.transport.http.AxisServlet.doGet(AxisServlet.java:260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:534)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.makeNewInstance(WSDDDeployableItem.java:304)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:274)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getHandler(WSDDDeployment.java:394)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:276)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDChain.makeNewInstance(WSDDChain.java:125)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:274)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:260)
at org.apache.axis.deployment.wsdd.WSDDService.makeNewInstance(WSDDService.java:430)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getDeployedServices(WSDDDeployment.java:503)
at org.apache.axis.configuration.FileProvider.getDeployedServices(FileProvider.java:296)
at org.apache.axis.transport.http.AxisServlet.reportAvailableServices(AxisServlet.java:482)
at org.apache.axis.transport.http.AxisServlet.doGet(AxisServlet.java:260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:534)
The snippet from the WSDD is as follows:
<handler name="RequestHandler" type="java:com.doc.service.DataHandler"/>
<service name="AddCalcService" provider="java:MSG">
<parameter name="allowedMethods" value="*"/>
<parameter name="className" value="com.doc.service.AddCalcService"/>
<requestFlow>
<handler type="RequestHandler"/>
</requestFlow>
<responseFlow>
<handler type="RequestHandler"/>
</responseFlow>
</service>
Could someone tell what the cause of this exception and how it could be resolved.Hi Bruce,
Thanks for all the links - am trudging through them now.
-Leena
Bruce Stephens <[email protected]> wrote:
Hi Lenna,
You might take a look at the SOAPBuilders interop tests.
See: http://www.whitemesa.com/r3/interop3.html and notice the DocLit
tests.
Our endpoints are http://webservice.bea.com:7001 and the code for the
client and servers can be located here:
http://webservice.bea.com/index.html#qz40
The good folks with WS-I have spent many cycles on interop issues. You
might have a look at their work:
http://www.ws-i.org/Profiles/Basic/2003-08/BasicProfile-1.0a.html
Hope this is of some value,
Bruce
leena wrote:
Hi,
I am trying to build a synchronous document-style web service, andthe bea
site doesnt seem to have much documentation on it. I have a samplewritten with
SOAPElement as the input and output of my method, no schemas, my reqand response
are anyType, but im not sure if that is the best way to go. AND, itdoesnt work
yet.
Can anyone point me to a place where i can look for information ?i am on weblogic
8.1. I would eventually also want my input/output xml to be definedby my schema.
I see in examples that DOM Documents may also be passed as parameters(inand out)
? is there any place i can read up on this and decide what the bestoption for
me is ? Also, i will be running a .Net client against this, so if thereis anything
i need to keep in mind, i would appreciate it if anyone gave me anyinfo.
Thanks in advance!
leena. -
Problem with SunFileBinding configured with endpoints.xml
Hello,
I'm trying to confiugure the SunFileBinding using the endpoint.xml file. The idea is to pikcup a file from the filesystem and pass it to my engine.
I've checked the samples under ri-components/file-binding and I (think) my descriptors are identical.
However, I get from OpenESB the following error when deploying my SA:
Error : Reason : The endpoint described in deployment descriptor jbi.xml was not found in artifacts XML file
- Endpoint (described as : serviceinterfaceendpointtype). ::: TestSeqEngTestSeqEngIFftpEndpointconsumer Here are my descriptors:
<jbi version = "1.0"
xmlns = "http://java.sun.com/xml/ns/jbi"
>
<services binding-component = "true" xmlns:sns1="http://test.com/testseqeng/wsdl" >
<consumes service-name = "sns1:TestSeqEng"
link-type = "standard"
interface-name = "sns1:TestSeqEngIF"
endpoint-name = "ftpEndpoint"
/>
</services>
</jbi>
<endpoint-list
xmlns="http://www.sun.com/ns/jbi/bindings/filebinding/deploy/endpoint-config"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >
<endpoint>
<service>
<namespace-uri>http://test.com/testseqeng/wsdl</namespace-uri>
<local-part>TestSeqEng</local-part>
</service>
<interface>
<namespace-uri>http://test.com/testseqeng/wsdl</namespace-uri>
<local-part>TestSeqEngIF</local-part>
</interface>
<endpoint-name>ftpEndpoint</endpoint-name>
<endpoint-role>consumer</endpoint-role>
<input-dir>c:\tmp\jbi_in</input-dir>
<output-dir>c:\tmp\jbi_out</output-dir>
<processed-dir>c:\tmp\jbi_processed</processed-dir>
<input-pattern></input-pattern>
<operation>
<name>
<namespace-uri>http://test.com/testseqeng/wsdl</namespace-uri>
<local-part>DoTestOP</local-part>
</name>
<mep>http://www.w3.org/2004/08/wsdl/in-only</mep>
<input-message-type>xml</input-message-type>
<output-message-type>xml</output-message-type>
<output-file-prefix>pull_out</output-file-prefix>
<output-file-extension>html</output-file-extension>
</operation>
</endpoint>
</endpoint-list>Can you please tell me if there's something I'm missing here?
ThanksHi,
The FBC cannot recognize namespace prefixes defined inside the services element
"<services binding-component = "true" xmlns:sns1="http://test.com/testseqeng/wsdl" >"
so its not able to resolve sns1 and thats why you are getting the error message.
Please add the namespace prefix sns1 to the root element (jbi) ,this should work
e.g
<jbi version = "1.0"
xmlns = "http://java.sun.com/xml/ns/jbi"
xmlns:sns1="http://test.com/testseqeng/wsdl"
>
Thanks
-Ramesh -
SCCM 2012 Endpoint applies two policies "Default Policy & Custom policy" without using merge
Hi All,
Am facing an issue deploying endpoint policies @ the configuration manager, as for some device collection it applies the default policy without being deployed or merged with any other policy.
below is snapshot from policies on SCCM & policies applied on one of the clients.
ThanksThat's default behavior. The default policy will always be aplied without the need to be specifically deployed. If you look at the applied settings you should see that the settings are merged were applicable. See for a nice explanation:
http://blogs.technet.com/b/mspfe/archive/2013/11/13/system-center-configuration-manager-2012-scep-policy-behavior.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Ok, I am new to SCCM 2012. But I have a big book and a clean server so I installed sccm primarily to deploy endpoint protection. I had made a test group and EP deployed to it, but I cannot seem to replicate that success on a larger scale to all
my workstations. I'm sure I am just missing a step given how much needs to be configured.
Here is what I have done:
In Assets and Compliance:
I have created an antimalware policy
I created a device collection called 'Company All Workstations'
Properties of the collection 'company all workstations'
Limiting collection is 'all systems'
I created a maintenance window called 'late night'
Uses 'Company Distribution Point Group'
I have set the alerts to show stuff in the endpoint protection dashboard
Finally, I have, successfully, deployed the SCCM client to these systems (at least according to the client column when viewing the members of the collection).
In the Administration Section:
the server is set to have all the various roles - endpoint protection, dist point, etc.
There is one distribution point group called ' Company Distribution Point Group' and the collections tab shows the 'Company All Workstations' collection. The Members tab shows the server.
In the Software Library Section:
I have one deployment package called 'Endpoint Protection Deployment Package' and the content location is set to the server as a distribution point
I have one automatic deployment rule called 'Company Auto Deployment Rule for Endpoint Protection'
this rule is applied to 'company all workstations' collection
the deployment package is the 'Endpoint Protection Deployment Package'
this rule is set to download:forefront client security OR Forefront Endpoint Protection 2010; superseded: no; will do updates, definitions, critical and a few other categories.
the auto deployment rule has run with success.
So, I have done all that, but when I go to my Monitoring | Endpoint protection - it says only one client has been deployed (the one I did my original test with).
Does anyone see something obvious I am missing to get Endpoint Protection deployed and updated to my systems?
Thanks!Did you configure a Client Settings policy (under Administration -> Client Settings) that enables the following settings under "Endpoint Protection"?
- Manage Endpoint Protection client on client computers
- Install Endpoint Protection on client computers
This client settings policy must be deployed to the same systems that you want to install the EP client on. -
Hi All,
I am getting this exception when i try to run my code on weblogic-
java.lang.NoSuchMethodError
at org.apache.axis.deployment.wsdd.WSDDDocument.setDocument(WSDDDocument.java:136)
at org.apache.axis.deployment.wsdd.WSDDDocument.<init>(WSDDDocument.java:65)
at org.apache.axis.configuration.FileProvider.configureEngine(FileProvider.java:179)
at org.apache.axis.AxisEngine.init(AxisEngine.java:172)
at org.apache.axis.AxisEngine.<init>(AxisEngine.java:156)
at org.apache.axis.client.AxisClient.<init>(AxisClient.java:52)
at org.apache.axis.client.Service.getAxisClient(Service.java:104)
at org.apache.axis.client.Service.<init>(Service.java:113)
at com.gs.wm.Webusage.CallWebService.callWebService(CallWebService.java:36)
at com.gs.wm.Webusage.Delegate.callService(Delegate.java:34)
at jsp_servlet._wm._Webusage._WebUsage._jspService(_WebUsage.java:341)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:105)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:123)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:742)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:686)
at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:247)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:361)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Any pointers why i am getting this?I tried working with axis.jar 1.2 and 1.4 but it dint help.
Regards,
Shikhai have made no changes to deployment descriptor,but yes i have included all the jar files to the Weblogic classpath in the startserver script.
-
Implementing a Webservice with AXIS, which calls CORBA objects
Hi @all!
First my aim is it to invoke a Webservice by a Client. As toolkit for developing this Webservice I use AXIS 1.0. This Webservice in turn should establish a CORBA connection to a third application.
A direct access to the CORBA objects without the AXIS Webservice works fine. The Webservice without the Corba access is also running errorfree.
When trying to implement a Webservice with AXIS, which calls CORBA objects following fault was generated:
"internal Server Error(500)".
Are there known problems with AXIS in conjunction with CORBA?Okay here's the error log file:
1000 of lines, which aren't very helpful for me.
As ORB I use JacORB.
AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultString: (500)Internal Server Error
faultActor: null
faultDetail:
null: return code: 500
<html><head><title>Apache Tomcat/4.1.18 - Error report</title><STYLE><!--H1{font-family : sans-serif,Arial,Tahoma;color : white;background-color : #0086b2;} H3{font-family : sans-serif,Arial,Tahoma;color : white;background-color : #0086b2;} BODY{font-family : sans-serif,Arial,Tahoma;color : black;background-color : white;} B{color : white;background-color : #0086b2;} HR{color : #0086b2;} --></STYLE> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade><p><b>type</b> Exception report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>The server encountered an internal error () that prevented it from fulfilling this request.</u></p><p><b>exception</b> <pre>javax.servlet.ServletException: Servlet execution threw an exception
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:484)
</pre></p><p><b>root cause</b> <pre>java.lang.NoClassDefFoundError: org/omg/PortableServer/POAOperations
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:195)
at org.apache.axis.utils.ClassUtils$2.run(ClassUtils.java:187)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.axis.utils.ClassUtils.loadClass(ClassUtils.java:171)
at org.apache.axis.utils.ClassUtils.forName(ClassUtils.java:154)
at org.apache.axis.utils.cache.ClassCache.lookup(ClassCache.java:122)
at org.apache.axis.providers.java.JavaProvider.getServiceClass(JavaProvider.java:502)
at org.apache.axis.providers.java.JavaProvider.initServiceDesc(JavaProvider.java:535)
at org.apache.axis.handlers.soap.SOAPService.getInitializedServiceDesc(SOAPService.java:322)
at org.apache.axis.deployment.wsdd.WSDDService.makeNewInstance(WSDDService.java:477)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getNewInstance(WSDDDeployableItem.java:312)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:298)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getServiceByNamespaceURI(WSDDDeployment.java:503)
at org.apache.axis.configuration.FileProvider.getServiceByNamespaceURI(FileProvider.java:273)
at org.apache.axis.MessageContext.getPossibleOperationsByQName(MessageContext.java:226)
at org.apache.axis.message.BodyBuilder.onStartChild(BodyBuilder.java:150)
at org.apache.axis.encoding.DeserializationContextImpl.startElement(DeserializationContextImpl.java:893)
at org.apache.xerces.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:459)
at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:221)
at org.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(XMLNamespaceBinder.java:874)
at org.apache.xerces.impl.XMLNamespaceBinder.emptyElement(XMLNamespaceBinder.java:591)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:747)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1477)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:329)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:525)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:581)
at org.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1175)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:394)
at org.apache.axis.encoding.DeserializationContextImpl.parse(DeserializationContextImpl.java:232)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:546)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:377)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:304)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:335)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:484)
</pre></p><HR size="1" noshade><h3>Apache Tomcat/4.1.18</h3></body></html>
(500)Internal Server Error
at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:630)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:131)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:156)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:126)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:182)
at org.apache.axis.client.Call.invokeEngine(Call.java:2113)
at org.apache.axis.client.Call.invoke(Call.java:2102)
at org.apache.axis.client.Call.invoke(Call.java:1851)
at org.apache.axis.client.Call.invoke(Call.java:1777)
at org.apache.axis.client.Call.invoke(Call.java:1315)
at CsbClient.main(CsbClient.java:82)
[INFO] enterprise - -Mapping Exception to AxisFault <(500)Internal Server Error>
(WSDDDeployableItem.java:312)
at org.apache.axis.deployment.wsdd.WSDDDeployableItem.getInstance(WSDDDeployableItem.java:298)
at org.apache.axis.deployment.wsdd.WSDDDeployment.getServiceByNamespaceURI(WSDDDeployment.java:503)
at org.apache.axis.configuration.FileProvider.getServiceByNamespaceURI(FileProvider.java:273)
at org.apache.axis.MessageContext.getPossibleOperationsByQName(MessageContext.java:226)
at org.apache.axis.message.BodyBuilder.onStartChild(BodyBuilder.java:150)
at org.apache.axis.encoding.DeserializationContextImpl.startElement(DeserializationContextImpl.java:893)
at org.apache.xerces.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:459)
at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:221)
at org.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(XMLNamespaceBinder.java:874)
at org.apache.xerces.impl.XMLNamespaceBinder.emptyElement(XMLNamespaceBinder.java:591)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:747)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1477)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:329)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:525)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:581)
at org.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1175)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:394)
at org.apache.axis.encoding.DeserializationContextImpl.parse(DeserializationContextImpl.java:232)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:546)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:377)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:304)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:335)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:484)
</pre></p><HR size="1" noshade><h3>Apache Tomcat/4.1.18</h3></body></html>
(500)Internal Server Error
at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:630)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:131)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:156)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:126)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:182)
at org.apache.axis.client.Call.invokeEngine(Call.java:2113)
at org.apache.axis.client.Call.invoke(Call.java:2102)
at org.apache.axis.client.Call.invoke(Call.java:1851)
at org.apache.axis.client.Call.invoke(Call.java:1777)
at org.apache.axis.client.Call.invoke(Call.java:1315)
at CsbClient.main(CsbClient.java:82)
Exception in thread "main" -
Biginner question Axis and tomcat
Hi,
I get this error when I'm running me web service with tomcat 5.5 and axis 1.4:
Exception: AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.net.ConnectException: Connection refused: connect
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:120)
at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
at org.apache.axis.client.Call.invoke(Call.java:2748)
at org.apache.axis.client.Call.invoke(Call.java:1784)
at org.apache.axis.client.AdminClient.process(AdminClient.java:439)
at org.apache.axis.client.AdminClient.process(AdminClient.java:404)
at org.apache.axis.client.AdminClient.process(AdminClient.java:410)
at org.apache.axis.client.AdminClient.process(AdminClient.java:320)
at org.apache.axis.client.AdminClient.main(AdminClient.java:463)
{http://xml.apache.org/axis/}hostname:yaelI created with eclipse web project with
I set in: D:\Tomcat\webapps\axis
D:\Tomcat\webapps\axis\WEB-INF\classes\Hello\HelloWorld.class
D:\Tomcat\webapps\axis\deploy.wsdd
D:\Tomcat\webapps\axis\undeploy.wsdd
Thanks in advance
Yael.Yael, you have found there a great tutorial and I do not see you I could give you a more detailed approach than the one found in this "Axis Hello World Example".
The only step I think is useless is the first one in the Eclipse walk through, for the rest, just follow the steps and you will end up with a running web service and a running client.
I notice you have not followed the tutorial already: your project is named "axis" and not "axis-ws-service" or "axis-ws-client".
Maybe start over and follow the steps this time?
Maybe you are looking for
-
What is diff B/W dalta image and reverse image
What is diff B/W dalta image and reverse image Edited by: Philip Eller on Jun 3, 2008 8:44 AM Edited by: Philip Eller on Jun 17, 2008 9:18 AM*
-
Brand new Ipod touch won't charge or turn on
I recently got a brand new Ipod touch. The first thing I did was plug it in to charge it. A red battery icon showed up on the screen. I left the ipod on the charger for hours and the icon was still red. It won't turn on either. I have tried connectin
-
Can I copy music iTunes Music Folder from my external Hard drive to new PC?
not sure if this is possible but I copied my folders (documents/music/itunes/itunes music folder) from my local hard drive from laptop to my external (for backing up purposes) and now i have a new computer. can i just simply copy/paste this folder to
-
Acrobat Professional for Mac...Bookmarks disappear, other problems
I am using a Mac with OS 10.6.6, and using Adobe Acrobat Professional 8.1.5. I find that I often lose some but not all bookmarks in documents after I save the file, close and then reopen the file. I also get one or two randome bookmarks that WILL NOT
-
Index problem in documentation.
Hi all. I'm having a problem getting my index to look proper in my printed documentation. It looks good for the CHM, but when I run a printed document I get words that don't exist in the CHM's index and they are duplicating. Instead of the page numbe