B4D controller program change buttons and EVB3?

Anybody using the B4D controller in Mainstage figure out how to get the program change buttons to work the presets on plugins? Also- how do I get the B4D drawbars to work the upper drawbars on the EVB3 instead of the lower drawbars which is what it's doing now? Much obliged

I had the B4D for a drawbar controller. The Doepfer D3C with 2 racks is much better as a controller, imo or another hardware clone itself with at least 2 racks. I am a bit spoiled though with 4 racks on my new Hamichord with all the same B3-controls (as the B3) using the B4II though it can run the EVB3 as a controller
Once you create your on-screen virtual drawbars they are assigned in the edit menu to the appropriate drawbar 16' 8' etc. You then can 'learn' (or should be able to) with the B4D after the on-screen drawbars are assigned. You could make a lower on-screen rack also and assign them. Using the lower drawbar button the the B4D - you should be able to learn those also so it works with the B4D controller.

Similar Messages

How can I programly change button's blink speed, blink forground/background color?

How can I programly change button's blink speed, blink forground/background color?
Besides changing the LabVIEW.ini, is there another method to achieve?

I was about to post a new one on this old thing but came across this when running the exe file from a vi with a blinking and back/foreground color property. In the vi mode everything worked properly as intended with the properties (different color and transparent other than the manual setting under the options->color), including changing the the color under options menu. But the exe file made the BG/FG color to red and yellow while blinking. I came across this topic a long time ago but never used the blinking indicators in the .exe files. NI or someone else has said this is a bug or the default in .exe running environment, please confirm this so I do not have to play around with this.
Also attached is the .ini file from the .exe file and how I add a BG/FG color line to get it working like blue when visible and transparent when not?
Thanks in advance!

Problems with programming submit button and attachment upload

i have a problem programming the upload "athachments" and i
would like to know how to program the submit button to go to an
email address. once the form is filled out i want the information
to go into my email inbox. what script or coding to i need to add
to the page to make these two things i mentioned above happen?the
code for the page and where does it go. that is the reason for my
questioning on how to program the two buttons and place the code in
the html where it belongs so the page will function right and go to
the email adress that i need it to go in.
http://worldofexotics.com/submit.htm

> There are only two ways to process form data -
You understand that, right? You are asking about how to
process form data -
and I am saying that there are only 2 ways to do that.
> 1. Use mailto:[email protected] as the action of the form
You understand that? Each form has an action -
<form action="..."
--------------------^^^
The contents of that action attribute tells the browser what
to do when the
form's submit button is successfully pressed.
In other words, you could have <form
action=mailto:[email protected]
That would be ONE way to do it - but there are many
disadvantages, as
explained further in my post. The other way is method 2 -
> Use a server-side scripting method to a) harvest the
form's data, b)
> process it in some manner, e.g., enter it into a
database, c) formulate
> and
> send an email to one or more email recipients, and d)
redirect the visitor
> to some ending page
To do that, you'd have to *have* some server-side script -
there are quite a
few of them to choose from but the normal host usually also
supplies one as
part of your hosting package.
> You would have to decide which of these methods is best
for your needs,
> but if it's Method 2, then start by asking your host
what they provide for
> form processing.
Do you undertand that?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jayney" <[email protected]> wrote in message
news:[email protected]...
> Hi I have been sent this answer but i am still none the
wiser
>
> Can you work it out? this is the answer
> below.............................
>
> There are only two ways to process form data -
>
> 1. Use mailto:[email protected] as the action of the form
> 2. Use a server-side scripting method to a) harvest the
form's data, b)
> process it in some manner, e.g., enter it into a
database, c) formulate
> and
> send an email to one or more email recipients, and d)
redirect the visitor
> to some ending page
>
> Method 1 is quite simple, and is also the least
reliable. It depends both
> on your visitor having an email client already installed
on their
> computer -
> this eliminates public computers, or home users without
email clients
> installed (more and more it seems) - and on the
installed email client
> responding to
> the mailto call. It is not possible to use this method
*and* send the
> visitor to a
> thank you page as well.
>
> Method 2 is the preferred method, since it eliminates
the problems of
> method
> 1, but it means that you have to grapple with
server-scripting somehow
> (ASP,
> CF, PHP, perl, etc.).
>
> You would have to decide which of these methods is best
for your needs,
> but if it's Method 2, then start by asking your host
what they provide for
> form
> processing.
>

Sending Program Changes to external MIDI device

Just getting started with MainStage, so excuse the basic question . . .
I'd like to use MainStage with two main pieces of hardware – an Elektron Monomachine acting as the master clock and sequencer, and a Machinedrum, which is slaved to the Monomachine. I'm running MainStage to use a soft synth or two sequenced from the Monomachine, and for effects. So far so good.
Patterns on the Machinedrum are selected externally with MIDI Program Changes. Conversely, when you select patterns on the Monomachine, it sends out a Program Change message so that you can lock the two machines together pattern-wise.
In Layout mode, I drop in a rotary knob, hit the Learn button and change patterns three times on the Monomachine; the knob says Program Change and the number of the Program (all correct).
Next, in the Patch editor, I map that screen control to Machinedrum > MIDI Controller > Program Change. If I turn the knob using the mouse, it changes the Program (pattern) on the Machinedrum (all correct).
BUT . . . now (in either Edit or Perform mode) when I change the pattern on the Monomachine (sending a Program Change message), the knob doesn't move. I see the Program Change message being received by MainStage in the MIDI monitor, but it doesn't get routed to the screen control.
What could I be doing wrong? Why does it respond correctly in Learn mode, but then not in Edit or Perform mode?

peterslade wrote:
BUT . . . now (in either Edit or Perform mode) when I change the pattern on the Monomachine (sending a Program Change message), the knob doesn't move. I see the Program Change message being received by MainStage in the MIDI monitor, but it doesn't get routed to the screen control.
What could I be doing wrong? Why does it respond correctly in Learn mode, but then not in Edit or Perform mode?
Hi
Could it be that MS thinks the incoming PC messages are intended to change MS patches?
In Edit mode, select the Concert in the Patch list, and change the Program Change Device/channel etc in the Attributes Inspector to something other than the Mono
HTH
CCT

What values do I enter in the program change field for EXS24 ?

I am using YaMAHA WX5 WIND CONTROLLER to play instrument sin Logic. I can get 'next settings' and 'previuos settings' to work with cc values. However, because of the setup of the WX, it wouls work better for me if I coud use its program change buttons.
What value should go in the program change box ?
OPEn EXS24
click edit
navigate edit>preferences>select previous instrument or next instrument
afer that what value will allow EXS24 to change instruments using my WX5.
I have used MIDI monitor to find what value the WX sends and the only think that shows up is 'program'
I have tried learn assignment in Logic. When I press the program change button, Logic reads it as program change but provides no value.
Thanks

any one?

Can't make a selection of my pathes even if i have set a program change number for each one.Why is that happening?

Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?

Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT

How do i set program change messages to audio instruments?

it doesnt appear in the info window like it does for midi instruments...
Any ideas? Quite a lot of my reaktor instruments need program change messages, so im a bit stumped how to start working with my ideas.

It can be done in the event editor. Open the event list of the region, select the pencil tool and click to the program change button. A new program change event will appear in the list. All you have to do now is setting the position and the desired program number (maybe you have to subtract one if your soft synth starts with program No.1 because MIDI standard starts with zero).

Live Program Changes

Hi there all,
im trying to build a live audio machine using my drum kit to trigger everything. does anyone know of a way of using a MIDI note on messages to triger a program change?
ideally, what id like is to have a note, that each time you trigger, it moves the program for that channel up by one.
if this isnt possible, can anyone suggest another way of controlling program changes without having to go into the event list...etc...? ideally some kind of human interface.
thanks,

Ok - if you're fairly green to the environment (pun intended! this is tricky, and caused me a little bit of head scratching. I'll document what I did, but remember my requirements for this may be different from yours.
What I wanted to be able to do was program and bank change from notes on my keyboard when playing my XV5080 sound module, instead of having to reach over to the module and keep incrementing sounds. I wanted to bank change as well as the 5080 can have 40 or more banks of 128 patches.
So, the way I have routed this is that it only works when my 5080 is selected on a track. If you want yours to be active at all times and for all instruments, you'll need to take a feed from the physical input object instead.
This is what mine looks like:
The "Select" transformer objects home in on the notes you want to use for the program and bank change inc/dec. The two faders are the key objects, as they hold the current bank change and program change number.
The inc/dec buttons to the left of them send meta events to the faders in increment/decrement and handle wrapping around (ie if you are at 127 and you increment, the fader resets to 0).
I had to route the output and do some stuff to preserve the custom bank changes my 5080 needs, but your needs will be simpler.
Like I say, this isn't a trivial thing to do if you aren't that familiar with the environment. You need to use transformers to remove the notes you want from the MIDI stream (so the notes you are using for the program changes don't play notes themselves) and convert them into events that trigger increments and decrements of the program change fader, and then use that to output the program changes to where you want them to go.
Give it a go, it's probably a good learning experience, and if you get stuck, bump this thread....

Can program change info be sent to the channel strip?

Hi there, I have old logic midi files to update for use in logic pro7. I have set up an autoload template which I then drag the old logic files into so that I get the environment settings that I want and have some uniformity with all my files.
Is there a way I can get program change info and midi instrument settings from the event list, (in the midi tracks dragged in) transfered/sent into the channel strip?
Can the track info like control change, volume settings, pg ch, etc be sent to the channel strip so that they match?
I struggled trying to explain that I hope it's clear. Please help if you can.
Cheers,
Mojo

i think you have to double the track, and have the different CS on each channel

Inputing program change without controller attached.

is there any way to record program changes in realtime without any keyboard/controller hooked up to my laptop. for example, when i want do this with notes, i use the caps lock keyboard.
thanks in advance for your time.

thanks for the info. do you know if there is a way to have the faders or buttons accessible on the main window in logic 8 or would i have to record their changes from within the environment?

Re: Satellite A500 - need some help with FN button and Toshiba programs

Hi,
The FN button, Eco button and other specialized buttons such as the one which opens Windows Media Player have stopped responding on my A500 PSAM3A-03P00E which runs Windows Vista. I can still change screen brightness with the FN button but no menu appears at the top of the screen.
Also the Toshiba programs which are meant to run at start up such as PC Health Monitor are not auto starting, even though they are selected in System Configuration (msconfig).
Bluetooth manager is however running at start up.
I have previously had blue screen errors however they are not a problem since I updated the BIOS to 1.5 and uninstalled Zonealarms.
Cheers

Thanks all,
All problems have been fixed after downloads of Toshiba value added package and the new version of PC Health Monitor (V1.3.2.0).

SAP ITSMobile Change Template, size of buttons and dynpros

Hello Experts,
I am Using ITS Mobile (ECC 6.0), i generated the services to my programs, now i want to change the size of the dynpro and buttons, because they are showing in a big format, and we are having to use the scrollbar to see all the screen.
I followed the steps to create a generation style, i finished all of them, but now, i don´t know how to change the size of button and the screen.
This are the steps:
http://help.sap.com/saphelp_nw70/helpdata/en/46/6c3d6041496a58e10000000a11466f/frameset.htm
Somebody knows how are the steps to change, the size of buttons, colors, screen size?
Thanks in advance.
Alejandro

Hi,
Some reference or information about ITS Mobile Templates?
Thanks in advance.

Does anyone know how to select text in Appleworks, click on the font button and then be able to scroll thru all the font so that one can see the text change as you scroll down the list, at present I have to do it one font style at a time and then repeat

does anyone know how to view text in Appleworks, to be able to click on the font button and then be able to scroll thru all the font so that one can see it change as you scroll down the list, at present I have to do it one font style at a time and then repeat? Thanks jl

Welcome to the Apple forums
Your question really belongs in the AppleWorks community/forum.
You can turn on fonts in actual type in the AppleWorks preferences.

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I bougth the sf2 program change for garagaband, but what is it exactly and how do I make it work?

I couldn't find out what exactly the sf2 program change is, but it seemed nice, so I bought it, hoping that it would explain itself when installed. It hasn't. I did hope that it would give me some more midi instruments, and it seems like it should, but how to get them into garaband (10.0.2)?
This thread seems to explain it: How to do use Soundfonts (.sf2 files) in GarageBand 10?
It says I can add "audio unit plugins" to a track. Now I don't know what an audio unit plugin is, but I assume that it is a confusing word for a sound, and that it refers specifically to the sf2 sounds. I got as far as the smart control inspector but then "Click an empty part of the Audio Units area, choose Audio Units, then choose a plug-in from the submenu." What is the audion units area? I have clicked the empty part of whatever I could find here, but there is no submenu anywhere.
Is there anybody out there who could give a really basic explanation of what it is that I have purchased and how I can make it work? I would really apreciate it.
Ahston

I got a bit further. I found the submenu and I am able to load a default instrument. But I cannot change that instrument to any other.

B4D controller program change buttons and EVB3?

Similar Messages

Maybe you are looking for