Background job terminated in LSMW last step

Experts:
When I run the last step in LSMW: 13 Start Direct Input Program,
I set a background job for Trans:BMV0,
But it goes an error:
"Job started
Step 001 started (program RMDATIND, variant....)
Could not open file xxxx.lsmw.conv
Job cancelled after system exception ERROR_MESSAGE"
could you tell me possible reasons for this error?thank you!

Ichecked the file assignment in step seven.
what file path and name did you define for the converted file? is this located on your PC or on the application server?
did you execute step 11?
did step 11 tell you that SAP had written xxx records to the conv-file?
The file path is on the application server
yes,I executed it.
Transactions Read:                9,066
Records Read:                    50,324
Transactions Written:             9,046
Records Written:                 50,228

Similar Messages

Background Job Terminating with Signal 4 received by operating system

Hi ,
There is a zee ABAP program which is working fine in foreground but the same was not working at BACKGROUND when I shedule the job with the same zee ABAP program. the job is terminating with "Job also cancelled due to process termination. See the system log" But the same was worked previous at background too, there are no changes to the program too.The problem was with only this zee ABAP program for remaining are all working fine.
St22:
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZSDUZ980" in
"ADD_NO_ACTIVITY_RECORDS".
The main program was "ZSDUZ980".
The termination occurred in line 1174
of the source code of program "ZSDUZ980" (when calling the editor 11740).
The program "ZSDUZ980" was started as a background job.
Component............ "Taskhandler"
Place................ "SAP-Server witco-10_NCQ_00 on host witco-10 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 7209
The error reported by the operating system is:
Error number..... " "
Error text....... " "
System Environment
SAP Release.............. "31I"
Operating system......... "AIX"
Database type............ "ORACLE"
SAP kernel............... "31I"
SAP database version..... "31I"
Thanks
Sambi

Hi Mark,
Thanks for the reply,
Below are the memory details in our system, according to the Notes you send to me, They have set it as it is.
abap/heap_area_dia                          188743680
abap/heap_area_nondia                       400556032
abap/heap_area_total                        838860800
abap/heaplimit                              25165824
The same Zprogram was worked before in the BAckground, But from last week it stop working. But there are no chages happen to this zee ABAP program.
Thanks
Sambi

Table name for background job with report, variant and step user id list.

Hello All,
I need to generate the list of scheduled backgroung job with the list of Report Name, Variant, Step User Id called. Please any one tell the SAP Table name from which I can get these data.
Thanks in Advance,
Amit

Hi Rohit,
Thanks for your reply. But from TBTCO, i can't find program/report name and variant. Just the list of background job i can see.
Regards,
Amit

LSMW last step. Batch input????

Hi all,
I have successfully read the flat file and all the record is being read. The last step is batch input and its showing the record read and everything...
Now how do I go forward with the batch input and run it so that the respective data gets loaded to the transaction and to the database tables...
If possible, can you experts give me the steps so that I can run the batch input, the last step of the LSMW. Guys, I am really new to the SAP field, so please help me...
Waiting for your replies.
Thanks,
 -Ken C

Have you gone through all these steps, particularly the bold ones?
 Maintain object attributes
 Maintain source structures
 Maintain source fields
 Maintain structure relations
 Maintain field mapping and conversion rules
 Maintain fixed values, translations, user-define
 Specify files
 Assign files
 Generate read program
 Display read program
 Read data
 Display read data
 Generate conversion program
 Display conversion program
 Convert data
 Display converted data
 Check converted data against customizing
 Create batch input session
 Run Batch Input session
 Analyze erroneous transactions
 Frame program for periodic data transfer
The last steps in bold and italics are the ones that will post the data.
Srinivas

A Background job in one of the step delays due to awaiting for Gateway

Hi,
We have the month-end jobs executing in our Production systems every last week of month
It was observed that, one BGD job took 30-45 mins delay to finish.
- In one of the steps, there is Parallel processing with 56 DIA work processes across 4 Application servers out of 6.
- It was observed that all these 56 processes were showing status ON HOLD (Reason RFC) when we checked.
- I went to the BGD job process (sm51) to see if the job is executing
- I saw the message - further awaiting for Gateway XXXX (Prod server)
- I checked in SM59 and all RFCs were OK
- Even in SMGW everything was OK
Please help me to find what exactly is the reason for the delays due to Gateways
Thanks & Regards,
Sameer

Hi Ashish,
The BGD job running on one of the work process indicated - "Waiting for Gateway XXXX (Prod system)"
Here when I checked the 56 DIA work processes, it indicated - ON HOLD & Status - RFC.
I need to know more on the Gateway mechanisim in this. Hope the problem was in the gateway connection for a temporary proceess
Else the system was OK. No improper functioning was observed.
Need to explore more on this.
Regards,
Sameer

How to find Spool number for a 2 steps background job.

Hi All,
How to find spool number (and also the background job name ) for a 2 steps background job.
in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
Thanks,
Shiva.

Which one creates the spool? (first one I guess)
What kind of spool? (WRITE, sapscript, smartform, pdf...)
Do you use special statements like NEW-PAGE, or other things?
Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...)

Background job PLAAP5BULCOD_CONS_CHECK_CCR_MPOR cancelling

Hi,
Background job PLATA_CONS_CHECK_CC_EMPTOR canceling in my SCM 5 system.
Log from SAM is as below. Job is running around 2.5 hours.
In ST, found few time out errors while this job is running.
Didnt found errors related to this job (user, twp) in SAM.
Is function module /SAPPORO/COIF_DELTA_SE_FROM_R and /SAPPORO/DM_COPY_ORDERS_LCD_PACK related to the program /SAPPORO/COIF_DELFTWARE ?
how to fix this? is any other logs are available to check this (in SCM)?
Please suggest.
(AIX,Oracle,SCM)
SAM error: ____________________________________________________________________________________
21.03.2010 10:30:03 Job started
21.03.2010 10:30:03 Step 001 started (program /SAPPORO/COIF_DELFTWARE, variant PR_MANU_FORD, user ID BATCH_AM)
21.03.2010 11:13:04 Iteration executed
21.03.2010 11:13:05 Spool request (number 0000031813) created without immediate output
21.03.2010 11:13:05 Results saved successfully
21.03.2010 11:13:06 Step 002 started (program /SAPPORO/COIF_DELFTWARE, variant PR_PLAN_FORD, user ID BATCH_AM)
21.03.2010 12:00:18 Iteration executed
21.03.2010 12:00:24 Spool request (number 0000031833) created without immediate output
21.03.2010 12:00:25 Results saved successfully
21.03.2010 12:00:25 Step 003 started (program /SAPPORO/COIF_DELFTWARE, variant PR_MANU_FORD, user ID BATCH_AM)
21.03.2010 13:00:58
21.03.2010 13:00:58 Background job terminated due to communication error
21.03.2010 13:00:58 Job canceled after system exception ERROR_MESSAGE
ST22 Errors_______________________________________________________________________________
TIME_OUT ERRORS with the following details:
user ID: BATCH_AM
Function module: /SAPPORO/COIF_DELTA_SE_FROM_R (and /SAPPORO/DM_COPY_ORDERS_LCD_PACK also )
Thanks & Regards,
Nagendra.

Hi Nagendra,
it seems the problem is related to timed out issue in the work process
what is the present value of rdisp/max_wprun_time ? check in RZ11 , increase the value of atleast 3600 ( setting zero is maximum value , you can also try and revert back once bgd process completes)
Thanks and regards
Purna

How to transfer a bdc program online to background job ?

Hi,
 I have created a program using BDC for inserting items into a specific sales order, which woks well inline.
 Now i want to transfer it to background job,Could u
give me steps in detail? thanks in advance.

I understand that with your program you can create BDC seesion ( and not use Call Transaction ).
I am not sure if you want your program to run in batch or you want the session created by your program to run in batch. I am giving solution for both.
To schedule the processing of session in backgroud you can use report RSBDCSUB.
You can do in two ways -
Ist Method
Define a batch job in SM36 with two steps -
First Step - Your Custom Program ( with a variant )
Second Step - RSBDCSUB ( With a variant having
 the session name ).
2nd Method
In your program after BDC_CLOSE_GROUP add a line.
SUBMIT RSBDCSUB WITH MAPPE EQ <SESSION_NAME>.
Scedule you program as a batch job in SM36 ( Single Step ). ( You can also test the program by running in online mode . After your programs executes , go and see in SM35. You will see that your session created in being processed or has been processed in background).
In Both ways the session created by BDC_OPEN_GROUP will be processed in background,

Invoice creation by background job

Hi experts,
How to create invoices using a background job?
Please provide the steps.
Thanks

Go to transaction VF06 - Background processing
In the documents to be billed input the
Sales orgn
Dist channel
Division
shipping point
In case you would like to further filter data, choose billing dates, billing types, customer data etc otherwise leave them blank
Now from menu bar, select Program -> Execute in background
Now, Print screen parameter screen opens
click enter button
Now, start time screen opens
Select the appropriate button
since you want to schedule a background job
click date/time button and enter schedule start date and time information as per your requirement.

Last four Months Background job details to view

Hello ,
How to find Last four months (or last year) Background job details , as i need to schedule one job which was deleted from system and the same was executed 3 months agao, so i want to run the same job now( I do not know the steps to given for this job to shcedule again).
<<removed_by_moderator>>
Thanks,
Chinna
Edited by: Vijay Babu Dudla on Apr 28, 2009 5:40 AM

> Please do the needful asap
I thought this was extinct by now.
If the job was reorganized i.e. deleted, you'll have to do the needful and reschedule it from scratch. If you don't know the steps any more, bad luck I'm afraid.
Thomas

Background Job " RDDVERSI" getting terminated

Hi gurus,
When we check in SM37, We are seeing a background job that is getting terminated. In the job log it says DATASET_NOT_OPEN, Job cancelled. It is trying to run "RDDVERSI" program.
It is creating a Dump in ST22 and when we check the Dump in ST22, it says "The file "/usr/sap/trans/tmp/D01V985854.P01" has not been opened".
I checked the log in the trans directory and it gives me following error. Path of the Log "usr/sap/trans/log/D01V985854.P01".
1AEPU320 See job log"RDDVERSI""07435800""P01"
1 ETP184 CREATE VERSIONS BEFORE IMPORT
1 ETP110 end date and time   : "20070912074448"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP184 CREATE VERSIONS BEFORE IMPORT
1 ETP101 transport order     : "D01K985854"
1 ETP102 system              : "P01"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "340.16.24" "640"
1 ETP198
1AETR012XProgram terminated (job: "RDDVERSI", no.: "07460000")
1AEPU320 See job log"RDDVERSI""07460000""P01"
1 ETP184 CREATE VERSIONS BEFORE IMPORT
1 ETP110 end date and time   : "20070912074651"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
I think when it is trying to import a transport request, it is trying to create a version of it and it is not able to create that.
Can anybody help me in solving this problem?
Any Help is appreciated
Regards,
Swaroop.

Can you run this program in the foreground with a user that has the same permissions. If you get an authorization error again, check with transaction se53 on which objects you are missing authorization.
For these objects you can create an additional authorization profile...
Kind regards,
Mark

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Adding a new step in existing background job

Hi,
I have a background job which has 14 steps. I have to add a new program in 15th step. Can any one let me know how to go ahaed with that?
Regards,
Ashish

Go to SM37, go to the "released" version of your job. I assume that it is a periodic job, hence there should be a released version of it. select it and click from the menu, Job--->Change. Click the Steps button from the appliation tool bar, now click the create button. Enter the name of the abap program, click check, and save. That's it.
Regards,
Rich Heilman

Background job step - Printer - Output device table

Hi,
When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ?
Thanks.

Hi Raj check table TBTCP

Problem at the last step in LSMW Direct I/P Method

Hi all ,
I am trying to create the ROUTING using LSMW direct input method .
After executing the last step (Start Direct Input ) .. I am getting the Following Information as errors .
               Data Transfer of Routings via Direct Input                                                                  1
    Error_di_exp         From    To      Obj   Index       Plnnr
E    2     2                             O     0000000001
E                           1     1      A     0000000001
E                           2     2      O     0000000001
C\ 045
   You cannot edit the task list object with activity type
C\ 045
   You cannot edit the task list object with activity type
Please let me where could be the problem .
Thanks for any suggestions .
Regards,
Raj

go to CA01 and try loading one routing manually and you will understand whats the error.
discuss activity type restrictuing to be laoded with Functional consultent.

Background job terminated in LSMW last step

Similar Messages

Maybe you are looking for