Backing up system with Recovery and Repair not working

I have a Lenovo 3000 N500 4233-52u and I am trying to create a back-up with R & R. When I click on Back-Up Now nothing happens. Also, I can't find where to set the schedule for back-ups.
Do I have to re-install R & R ? If so which version should I install.
Thanks in advance for your help.
Bill

Kate,
Are these purchases not in your iTunes library? Content such as music, movies, apps, etc. are not included in the backup of your iPod. These all need to be transferred to your iTunes library seperately by choosing File -> Transfer Purchases with your iPod Touch still connected.
See this article about redownloading your missing purchases.
http://support.apple.com/kb/ht2519
B-rock

Similar Messages

Drilldown with ParentAfter and ParentBefore not working

Hi All,
I am using Drilldown option in Workbook Option with ParentAfter and ParentBefore. I found that the drilldown sometimes works but sometimes can not expand/collapse. First, i thought it was because of dimension member set in the current view is not base member, but now that i have already set all as base, the drilldown still can not work.
I have set the memberset as LDEP and taken out the sort range. And now, after logged off and on again, the drilldown can work again without me changing anything....
Any idea why it behaves this way?
Thanks in advance for the advice.
Ce Wie
Edited by: Go Ce Wie on May 22, 2009 3:20 PM

Your issue lies in your clientkeys. instead of:
clientkeys =
awful.key({modkey,}, "f", function(c) c.fullscreen = not c.fullscreen end),
awful.key({modkey, "Shift"}, "c", function(c) c:kill() end),
awful.key({modkey, "Control"}, "space", awful.client.floating.toggle),
awful.key({modkey, "Control"}, "Return",
function(c) c:swap(awful.client.getmaster()) end),
awful.key({modkey,}, "o", awful.client.movetoscreen),
awful.key({modkey, "Shift"}, "r", function(c) c:redraw() end),
awful.key({modkey}, "t", awful.client.togglemarked),
awful.key({modkey,}, "m",
function(c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end),
It should be
clientkeys = awful.util.table.join(
awful.key({modkey,}, "f", function(c) c.fullscreen = not c.fullscreen end),
awful.key({modkey, "Shift"}, "c", function(c) c:kill() end),
awful.key({modkey, "Control"}, "space", awful.client.floating.toggle),
awful.key({modkey, "Control"}, "Return",
function(c) c:swap(awful.client.getmaster()) end),
awful.key({modkey,}, "o", awful.client.movetoscreen),
awful.key({modkey, "Shift"}, "r", function(c) c:redraw() end),
awful.key({modkey}, "t", awful.client.togglemarked),
awful.key({modkey,}, "m",
function(c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end)
I had the same problem and this fixed it.

Backing up my ipod touch and its not working?

hi guys...just wondering if anybody would be able to help me out with the problem i'm having with my ipod touch? either 2nd or 3rd generation 8GB
yesterday-thursday, i conncted my ipod to the computer and to itunes and it proceeded to do a backup, this then took around 3 hours. itunes then wanted to update the software on my ipod to 4.2.1 so i let this do so. after the update had been carried out, itunes told me it needed to restore my ipod, i also let it do this as i had done a back up and would be able to put everything that was on my ipod touch back onto it once the restoration had been done. This took a few minutes and then itunes asked me which backup i wanted to restore my ipod from, i restored this from the most recent backup that i had made just a few hours before hand and waited another couple of hours for this to be carried out. when the process was finished i took my ipod out of the computer, only to realise that my ipod touch only had apps that i have previously deleted, it didn't have any of my new apps on it and no music had been added. this is a problem for me as i had bought an album, various songs and a couple of apps which all cost me a lot of money on the app and itunes store that is avaliable on my ipod touch, and it seems to have dissappeared as the backup has not picked and of these new things and now i'm wondering if i would be able to get any of this back? my ipod now has nothing but the orginal settings on it. i hope someone will have a solution to this as it has caused alot of upset.

Kate,
Are these purchases not in your iTunes library? Content such as music, movies, apps, etc. are not included in the backup of your iPod. These all need to be transferred to your iTunes library seperately by choosing File -> Transfer Purchases with your iPod Touch still connected.
See this article about redownloading your missing purchases.
http://support.apple.com/kb/ht2519
B-rock

System Preferences, itunes and safari not working. Please Help?

Whenever i click on system preferences whether it be in the applications folder or in the dock, the window doesn't show. my system preferences is partly working because the very top menu bar with the little apple sign changes its menus to suit what system preferences has like system preferences written next to the little apple.
its the same with my itunes and my safari.
my menu bar changes when i click on itunes and if i press the play button on my keyboard i can hear music but no windows are coming up
the menu bars change as if the applications are open but no windows are coming up.
if anybody has any idea as to why its doing this and how i can fix it, please tell me.

Are you showing an signal when the SIM is inserted into the iPhone? Making calls and sending/receiving messages are two different things. Calls use the cellular side of things, messages uses data. I'm surprised that is all T-Mobile would do to check out your account is to test your SIM. What if they look at your account, is it provisioned correctly?
You can try to reset the phone. Hold the sleep/wake and home buttons together until you see the Apple logo. The phone will reboot. See if it works. If not, try to reset network settings. Go to Settings>General>Reset>Reset Network Settings. The phone will reboot. Check they if it is working. If not, then you can make an appointment with the Genius Bar at the Apple store, but I still lean heavily that the problem is with the carrier.

Dual Monitors with GPU and Motherboard not working

Hey guys, just wondering if anyone else could help me out.
So, I decided to hook up an old monitor of mine to my rig today and, lo and behold, the monitor isn't being detected by my computer.
I've already got a monitor running through my GPU (NVidia GTX 960) via DVI.
Currently tried connecting my second (old) monitor to my motherboard with DVI as well, but it isn't being detected.
I went into my bios and forced my integrated graphics on, but when I checked in the device manager, it said my VGA graphics adapter "Cannot start (Error Code 10)"
Also tried updating VGA graphics adapter drivers, but I had the latest drivers already.
I'm not sure if that's related to the issue, but I thought it'd be worth mentioning.
(What's also worth mentioning is that I'm a complete casual when it comes to computer building and such, lol)
Motherboard is a Gigabyte F2A88XM-HD3, supports VGA, DVI and HDMI.
Monitor that I'm trying to connect supports both DVI and VGA.

A lot of the 960's don't have 2 DVI's. However most have an additional HDMI and DisplayPort. I recommend you get an adapter from amazon or something. Just make sure that it will convert HDMI or DP to DVI. Usually amazon products have a good amount
of questions already answered by buyers.
Interesting that they'd go that route, I guess I just assumed since my 760 has two.
I've set up dual monitors using one DVI and one HDMI before, but I ran into issues with screen sizing. Despite having two identical monitors set at the same resolution the mouse would not transmit over to the second monitor at the same height as it was on
the first, so I had to buy an adapter like Joshua suggested.

Home sharing with IMac and applet not working

Sharing is turned on my IMac. My Apple TV is on and can see the name of the IMac. The iMac has photos selected but they don,t display on the Tv. I have verified the IMac has most recent version of ITunes. Been through TS guide, no luck. Apple TV says to turn home sharing on but it is already on. Any suggestions.

I have 2 Apple TV 2s. I updated one to the latest iOS and it immediately lost the connection to my home shared iMac. A week later I updated the second ATV2 and it immediately lost the connection, BUT I regained the connection with the first ATV2 I had updated earlier. The second still won't connect even after exhausting EVERY solution numerous times and the setting on both ATV2s are identical. Hoping the next iOS ATV update solves the problem.

Dynamic vlan assignment with 1242AG and IAS not working

I'm having trouble getting the dynamic vlan assignment to work on my 1242AG Cisco Aironet APs. I've seen multiple cases with a similar setup and configuration where it works just fine. I've tried everything I can think of. Any suggestions?
IAS and AD is running on Windows Server 2003
Everything works fine except the vlan assignment. Wireless clients successfully authenticate through IAS and Active Directory, but instead of being switched to the appropriate vlan the client stays in whichever vlan/ssid it originally connected to.
PEAP is the authentication method, using MS-CHAP v2. Naturally I have the attributes in the policy set appropriately, ie:
Tunnel-Medium-Type > 802
Tunnel-Pvt-Group-ID > vlanid
Tunnel-Type > VLAN
On the AP:
Cisco 1242AG, C1240 Software (C1240-K9W7-M), Version 12.4(3g)JA, RELEASE SOFTWARE (fc2)
I've attached the config for the AP, which shows that I have two vlans/SSIDs set to cipher, aes, network eap, wpa, etc. I noticed that if the
Tunnel-Pvt-Group-ID attribute is set to a vlan id that doesn't exist on the AP then the AP makes an event log saying so.

Good! Well to answer your questions, IAS is sending numbers, i.e. Tunnel-Pvt-Group-ID > 129
I did view the debug from an AP which showed the Tunnel attributes being recieved from the radius server (I'll have to wait until Monday to get a copy though).
I see I don't have that line "aaa authorization network default group rad_eap",
So I'll have give it a try, (maybe I can remote in so I don't have to wait until Monday).
Thanks,
Jason

Keyword filtering with 'all' and 'any' not working

Hi folks,
At the moment I'm testdriving Aperture 1.5.3, and it seems that when filtering on multiple keywords the logical connection 'any' or 'all' doesn't work.
For instance, the filtersetting is 'Match all of the following:'
[checked] Yosamite Sam
[checked] Bugs Bunny
[unchecked] Daffy Duck
This would mean I should see all pictures tagged with both the keywords 'Yosamite Sam' AND 'Bugs Bunny'. In stead of that, the result of the filter is all pictures tagged with 'Yosamite Sam' OR 'Bugs Bunny' OR both.
Is this a known issue and is already a fix for this?
Greetz,
Seeta

I had the same problem when I started using Aperture. The 'Match all/any of the following' is referred to the different searching options (by date, by keyword, by rating...)
If you need to search for images with all or any of the keywords ticked use the 'contain one or more of the following' or 'contain all of the following' beside the keyword title on the searching window.

I have macair bought 2009. Bluetooth connect with mouse and keypad not working. It used to work. Batteries are good. Green light flashes on each device, but no connection. Any suggestions to help me here? Thanks.

Dear Community,
I have a macbook air bought new in 2009. Since 2011 I only use it occasionally as I now mainly use my iMac. The mouse and keyboard that came with the macbook air used to work fine with bluetooth connection to the macbookair, but now they don't. The batteries are good. The green light flashes showing it is seeking other bluetooth device to connect to. But they wont connect to my macbookair. What could the problem be? Your help would be much appreciated.

Thanks for that. Yes I checked that already and BT enabled. Yes, external keyboard. But I just moved the computer to different part of room and bingo the devices paired and connected. So problem now solved. Thanks for offering your help.

I have a sonos music system that does not yet work with Lion and will not for about 3-weeks. I need to uninstall lion and go back to snow leopard, how do I do that?

I have a Sonos music system that is not yet compatible with Lion and will not be for several weeks. How do I uninstall Lion and go back to Snow Leopard?

While we all have MacBooks only a few have Lion. There's a Lion Support Community. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Adobe Flash will not update to a W-2000 system and will not work? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

have you tried to install flash
restart imac
go to web site which require flash

10.9.1 installs, then system turns off and does not restart.

10.9.1 installs, then system turns off and does not restart. When I eventually turn it back on, it installs again, then turns off.. Endless Cycle.. I have booted to restore disk, found errors that needed to be repaired and tried to repair them but system told me, after a few minutes, its not possible to repair. When I restart back to main disk, it shows the install AGAIN and then turns off. Much appreciate any Ideas?

All I can tell you is that:
Antivirus software, aside from being next to useless on Macs, is a common source of problems with Mavericks.
Google Drive was incompatible with Mavericks last time I looked.
WD hard drives have software that comes on the drives that is incompatible with Mavericks, software that comes with the drives that they want you to install on your mac which is incompatible with Mavericks, and in some cases firmware in the hardware of the drive enclosure itself which is incompatible with Mavericks. And all of this software is completely unnecessary. The good folks at WD have really worked hard to ensure that their products won't work with Mavericks. Bless their little pointy corporate heads. I'll bet that's the last WD drive you'll buy.
Basically you would need to get all this stuff uninstalled from your hard drive before it will reliably work with Mavericks. But even then, it might not work, because old/bad/incompatible software can alter your OS and the kernel such that uninstalling it won't help- the OS/kernel may be damaged such that you have no alternatives other than to erase the HD and start over. And anyway, currently you can't boot your HD to be able to access the Finder so unless you're going to spend a weekend with the Terminal you won't be able to uninstall that stuff in the first place. If I were you I'd just go ahead and erase the HD and install Mavericks from scratch.
10.9.1 doesn't come on a CD. If you had another (working) mac you could make a bootable installer flash drive with DiskMaker X and an 8 GB key drive DiskMaker X (formerly Lion DiskMaker) , but then you'd still have the same problem, the incompatible software would still be on your HD, unless you erase it first before you try installing Mavericks again. So there's really nothing to gain by having the Mavericks installer on a disk.
If you have a third party utility like Techtool Pro 7 you might be able to boot from the TechTool disk and repair your HD enough for it to boot.
Message was edited by: arthur

I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission. Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
If there's no change after taking this step, continue.
2. Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

"Backend systems with Release 701 are not supported " - ECC 6.0 to SRM 5.0

Hi ,
I have 2 doubts .
1. We are getting Error "Backend systems with Release 701 are not supported " while replicating vendors from ECC 6.0 backend system to SRM 5.0 system.
There are some notes on simillar topic but are not for SRM 5.0 ,suggested on SDN. an anyone please suggest what need to be done for the same.
2. Can we replicate Vendor Master Data with Contact Person from SRM to ECC system ? if yes, How ?
Regards
Narendra

answer 1:-
Note 1372175 - BBP_VENDOR_GET_DATA_JOB "Back-End Systems Not Supported"
On recent upgrade of the ECC back-end system to release '701' the program BBP_VENDOR_GET_DATA_JOB is getting errored out. If you are using SRM 5.0 , SRM_SERVER 550 with ECC backend Release 701 you encounter the above reported problem
Other terms
Vendor Replication Job, Release 701, Backend not supported, BBP_VENDOR_GET_DATA_JOB
Reason and Prerequisites
The program does not consider the release 701
remote_release EQ '700' OR remote_release EQ '701'.
OR
bbp_vendor_get_data - DEBUG what ois the remote_release 700 or 701?
Muhtu

HT1766 my ipod is disabled, and the recovery mode is not working. what should i do?

my ipod is disabled, and the recovery mode isn't working. what should I do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. Try more than once. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Try another cable
Try on another computer

Backing up system with Recovery and Repair not working

Similar Messages

Maybe you are looking for