Backup aborted - Unable to receive file 'startup-config'

I'm seeing this on some 2950s and an old 2924 that I have.  Is this issue related to the age of the switches?  It's picking up drivers and successfully testing credentials.  So I'm just checking.

It doesn't appear to be the lack of a startup-config file.  I checked the 3 affected devices.  The issue is possible destinations.  There is no option in the IOS running on these devices to set the destination as "http:"  See the output below for copy startup-config ?
flash:          Copy to flash: file system
ftp:            Copy to ftp: file system
null:           Copy to null: file system
nvram:          Copy to nvram: file system
rcp:            Copy to rcp: file system
running-config  Update (merge with) current system configuration
startup-config  Copy to startup configuration
system:         Copy to system: file system
tftp:           Copy to tftp: file system
As much as I would say this wouldn't be a Cisco OnPlus priority, one possible coding workaround might be a lightweight tftp server running on the OnPlus device and a modification of the code to attempt http: first and on failure to startup the tftp server and attempt to use that method and then shut the tftp server back down, for security reasons.  Just a thought.

Similar Messages

  • Error reading backup piece, unable to open file,

    I have 3 bkp file in BACKSET directory, I am trying to duplicate form one system(Windows XP) to another Windows XP.
    I get errors as below. Please help.
    channel ORA_AUX_DISK_1: reading from backup piece Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP
    ORA-19870: error reading backup piece Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP
    ORA-19505: failed to identify file "Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP"
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 3) The system cannot find the path specified.
    failover to previous backup
    The file Z:\FLASH_RECOVERY\MYSID\BACKUPSET\2010_03_31\O1_MF_NNND0_TAG_5V5S7C8S_.BKP does exist in the target database.
    Edited by: user10404616 on Mar 31, 2010 7:51 AM

    You must copy the backup pieces from SysA to SysB -- to the expected location. This would be the same directory path as on SysA.
    See the documentation on the DUPLICATE DATABASE command :
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta028.htm#RCMRF126
    If the target and duplicate databases reside on different hosts, then you must do one of the following tasks for duplication to be successful:
    Move backups and disk copies from the target host to the duplicate host to the same location as the target host so that the path names are identical
    Move backups and disk copies from the target host to the duplicate host to a new location (so that the path names are different), and then CATALOG them.
    Make sure that all backups and copies (disk or sbt) on the target host are remotely accessible from the duplicate host. Make sure that the archived redo logs are available in the expected location in the new host.
    Hemant K Chitale
    http://hemantoracledba.blogspot.com

  • Unable to Receive Files at the Receiver end

    Hello All,
    I have configured scenario Proxy to File with 1:2 transformation (Interface collections) ie
    1 Sender and  Receiver Service
    1 Sender interface
    2 Receiver interface
    1 Message and interface mapping
    1 Receiver determination
    1 Interface determination
    2 Receiver file channel with FCC
    The QoS is Exactly Once.
    My scenario is failing at Adapter Engine (Receiver end) failing to create 2 text files.
    My Question is
    1. The Status of the File Receiver channel in monitoring are in error status displaying "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error: invalid receiver channel 'a3478068e95133a8ad28777a3fe1344d'" What is the reason for this ? I checked the Cache update and cache is upto date.
    2.In SXMB_MONI , When Checked the trace part of Receiver Determination it correctly displays
    "<Trace level="2" type="T">Number of Receivers:1</Trace> "
    But when i checked Trace for Interface Determination it is displaying " InterfaceCollection</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: InterfaceCollection</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace> "
    Here it should display "Number of receiving Interfaces:2 " Right?   What is the reason for this ? do we have todo multimapping?
    3.In Message monitoring for Adapter Engine i could see messages in Holding state. what is the specific reason in his case (I know the literal/functional meaning) of messages going to holding state  . "Maintain Order at Runtime" is checked in Interface Determination?
    May I know in which situation the messages would goto into holding state (isit because IE was not able to find 2 receiver interface)  and without unchecking the "Maintain Order at Runtime" option and manual intervention isit possible to process the scenario successfully?
    Many thanks in Advance .
    Regards,
    Pavithra

    Hello Ninad,
    Since I am using EHP 1 SAP NetWeaver PI 7.11 , there is no explicit option of selecting "Enhanced Interface Determination" ( Its understood implicitly through the Signature tab in Message mapping (1:n transformation)) and I have done multimapping as message mapping (In the mapping editor, switch to the Signature tab page) for my scenario
    The cache (AE) is perfectly fine
    I am noting down my observation here.
    My scenario uses QoS EO and the " Maintain Order at Runtime" option was checked. There were many System error messages due to other issues for the previous month and holding messages for this month.
    I guess due to this the channels were in  error though the channels' status were in green but it was displaying message " Message processing failed. Cause:com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error: invalid receiver channel '1ac04de4d1103d09b5b9c764c8895e98'"
    Now I filtered all the 'system error' messages with Sequence Id and deleted all of them and Resent all the holding messages and there were no message in holding .Now again i tried sending some data's ...the channel are functioning fine and no such error messages are displayed
    Regards,
    Pavithra

  • Help REQ receiver FILE CC CONFIG ...POINTS WILL BE GIVEN!!!!

    Hi I am having problem configuring File receiver CC. This is a IDOC to File scenario... My payload is
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Test_MT xmlns:ns0="urn:test.com">
    <Record>
    <Target>
    <ProdNum>111</ProdNum>
    <Weight>10</Weight>
    </Target>
    <Chacteristics>
    <Value>10</Value>
    <Value>11</Value>
    </Chacteristics>
    <Line>
    <Line1>553</Line1>
    <Line2>344</Line2>
    <Line3>222</Line3>
    <Line1>454</Line1>
    <Line3>324</Line3>
    </Line>
    </Record></ns0:Test_MT>
    My Receiver file adapter configuration is
    RecordsetStructure: Target,Chacteristics,Line
    Target.addHeaderLine     0
    Target.fieldSeparator     ,
    Target.fieldFixedLengths 5,4
    Chacteristics.addHeaderLine     0
    Chacteristics.fieldSeparator     ,
    Chacteristics.fieldFixedLengths     5
    Line.addHeaderLine     0
    Line.fieldSeparator     ,
    Line.fieldFixedLengths 3,3
    Record.endSeparator     'nl'
    The output .txt file I get is
    111,10
    10
    11
    553,344,222
    454,324
    In the last line we see that <Line2> field has no value..What I wanted is in the last Line it should have been
    453, , 324
    So what shlould i do ???? shld i configure the File CC or the make some changes in the mapping ????????? and I wanted all the values to be in one line............  POINTS WILL BE GIVEN

    Hi,
    If you are using fixed field lengths in the receiver file adapter then , it expects all the record structure should fill with full length or full length of spaces.
    So if you don't get any value from Idoc for any of the fields, then make sure that you are passing atleast spaces for that field. So exact length of the field.
    For this you can make use of <b> if exists and else if</b> built in function in the mapping.
    Regards,
    Moorthy

  • Play book bluetooth unable to receive files

    I have just started using my playbook but i am having trouble sending files e.g music, pics and videos to my playbook via bluetooth. i have successfully paired my devices to my playbook but when i try to send via bluetooth i get the message "failed to find service". I have tried to send using my 8520, and i also made sure that my playbook bluetooth was on and discoverable but still with no success.

    I don't think you can transfer files over bluetooth:
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=5E9151D084991D71E41F64FDA912E4E5?...
    Here is a link explaining blackberry bridge:
    http://docs.blackberry.com/en/smartphone_users/deliverables/27018/Bridge_1921710_11.jsp
    but I'm thinking you can't transfer files using bluetooth, you'll have to use the first link I posted.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Unable to receive files in version 4.10.10

    I cannot seem to retrieve or view files sent through the newest version of skype for ipad. It tells me they have posted files, but there is no way that I can see to veoew or download them. Is it me or the new version.

    Grid mode in Library module, make sure you, click and hold, on the center (not the border) of one of the selected photos. Then drag them to the folder you wish to move them to.

  • Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

    Hi Everyone,
    Whenever I install some new software in my new laptop I get this error:-
    Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
    I have tried synchronizing the clocks but it doesn't remove the problem.
    These softwares work on another laptop that i have, which also runs windows 7.
    Can someone please tell me the solution as this is extremely urgent.
    Thanks In Advance.
    -Michael

    In short:
    ============
    My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
    In detail:
    ============
    Problem:
    Failed to install this application
    - http://www.ssware.com/cryptoobfuscator/download.htm
    - on Windows 8.1 x64
    - Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
    First Candidate Solution
    The issue turns out to NOT be security rights on the Temp folder
    ESET Smart Security HIPS Advanced Memory Scanner is the cause
    http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
    Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
    In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
    Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
    Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
    I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said. 

  • Unable to clone File Adapter receiver channel for parallel processing

    Hi Experts,
    I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
    While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
    Can anybody provide me suggestions to solve this error.
    Note : without variable substitution , the interface is working good.
    Is it due to, i am trying the source structure field in response file adapter?

    Hi,
    In your CC, do you use some additional paramaters ?
    like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
    Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
    Mickael

  • "unable to send or receive files"   .... PLEASE HELP!!

    i put in a cd and copy the songs on it to my library. they take a minute or two to download. then i try to autofill my ipod shuffle, and i keep getting the message that it is "unable to send or receive files" what do i do??? please help me!!!

    if your using an audio cd...i assume itunes would automatically open the cd and a box would appear before each song...choose the songs youd like to convert by checking the box..after selecting songs use the right click button and a part of editing your songs will be displayed...and click on to "convert to AAC"

  • FTP client and startup-config backup on SCE

    Hi,
    Does anybody know why I'm not able to upload startup-config from SCE device to FTP server ?
    I use command:
    copy startup-config ftp://anonymous:[email protected]/startup-config.txt
    but everytime I see error message:
    Error - Failed to open destination file.
    What's wrong with it ? Another client from my PC is able to connect to this FTP server

    Hi,
    Does anybody know why I'm not able to upload startup-config from SCE device to FTP server ?
    I use command:
    copy startup-config ftp://anonymous:[email protected]/startup-config.txt
    but everytime I see error message:
    Error - Failed to open destination file.
    What's wrong with it ? Another client from my PC is able to connect to this FTP server

  • Copying startup-config file

    Hi,
    I have one armed mode CSS11503. I can't sync. both Load balancers.
    Is it possible to copt master's startup-config file via ftp and modify than paste in slave one?

    you can copy the config from one css to a ftp server.
    First create an FTP record in config.
    Then use the command 'copy startup-config ftp '
    Edit the file and adjust circuit ip addresses and app settings.
    Then copy it into the standby CSS with the command
    copy ftp startup-config
    Gilles.

  • Help: startup-config file open failed (Not enough space)

    Who can help me ? I've an uc500 and he stil running. Now i want to change something and want to save the configuration first. But the following message appears : startup-config file open failed (Not enough space)
    this is the output from a dir flash:
    Directory of nvram:/
      227  -rw-       25897                    <no date>  startup-config
      228  ----        1933                    <no date>  private-config
      229  -rw-       25897                    <no date>  underlying-config
        1  ----          83                    <no date>  persistent-data
        2  -rw-           0                    <no date>  ifIndex-table
        3  -rw-         577                    <no date>  IOS-Self-Sig#1.cer
        4  -rw-         615                    <no date>  IOS-Self-Sig#2.cer
        5  -rw-         660                    <no date>  vlan.dat
        6  -rw-         107                    <no date>  cca.xml
        7  -rw-         586                    <no date>  IOS-Self-Sig#3.cer
    262144 bytes total (227094 bytes free)

    OK.
    Try this:
    conf t
    service compress-config
    And see if that helps. 
    If not, see if you can tftp the running config off the router and TFTP it back to startup-config:
    copy run tftp
    copy tftp start
    Then you can try a reload and see if it is cured.
    I googled and found a few cases where alot of ACLs or NAT rules could cause MALOC errors (you would see those in your logs) when implemented and could manifest itself in this condition, which could be cured after the next reload, which is why I suggested that.
    Of course, dont be remote when you do this and only do it during a maintenance window.
    Steve

  • I keep receiving an error message, "unable to update files in cache"

    Yesterday I install the latest version of Firefox 3.6.14 and I'm constantly receiving an error message, "unable to update files in cache," is this a settings issue, and how can I fix the problem.

    Hi Terry, A post is the message that anyone has just typed in. When you replied to me, that was your post. I am replying to you so this is my post. Think of it as sending an email or mailing a letter at the "post" office.
    Now right at the top of the last post (message) you sent me is a Post#, then the date and time and under that the thread subject "Re: I am trying to download Adobe Flash Player 10 and I keep getting......
    The first time that you posted, you described your problem. The next post after that is #1 and so on.
    The Adobe Flash Player forum works very much like email except there are a lot of "threads". A thread is what each message you see is called. Everyone that registers can start their own thread (subject). Then other people see it and can post to your thread and try to help you with your problem.
    You did pretty good, you registered, and you started your first thread
    Now do you feel somewhat more relaxed?  Hope so.
    Take a look now and see if you can find the Post# and etc that I described above.
    Thanks,
    eidnolb

  • HT201413 I purchased an album online with my ipad2 directly from the artists website.  I received an email containing the link to allow me to download it.  I tapped on the link and the MSG came up saying Safari is unable to download file.  Any ideas?

    I purchased an album online with my ipad2 directly from the artists website.  I received an email containing the link to allow me to download it.  I tapped on the link and the MSG came up saying Safari is unable to download file.  I have downloaded apps before with no problems.  This is the first music download I have purchased on my ipad2.  Maybe it has something to do with the security on the email I received from the artist containing the download.  I have the latest iTunes OS and apple iPad 2. O.S.  Any ideas on what to do?

    You can't download music via Safari on the iPad - you will need to download it on your computer, add it to your computer's iTunes, and then sync it to the iPad.

  • Online backup failure due to ORA-27086: unable to lock file - already in us

    Hi All,
      Online backup has failed due to the error
    =========================================================
    BR0301E SQL error -27086 at location BrInitOraCreate-5, SQL statement:
    '/* BRBACKUP AT PROF_CONN */ CREATE PFILE = '/oracle/SID/102_64/dbs/sap.ora' FROM SPFILE = '/oracle/SID/102_64/dbs/spfileSID.o
    ra''
    ORA-27086: unable to lock file - already in use
    IBM AIX RISC System/6000 Error: 13: Permission denied
    Additional information: 8
    Additional information: 1388548
    BR0303E Determination of Oracle version failed
    ==========================================================
    Please suggest.

    Check the file permissions on your Oracle_home...
    And kill all the processes, which already running for backup..
    Regards,
    Nick Loy

Maybe you are looking for