Backup returning "Operating System Error 5 (access is denied)"

SQL Server 2008 in Windows Server 2008
File server is Windows server 2008
Running SSMS 2008 from Windows 7.
Command ran:
backup database xyz to disk= N'\\fileserver\backup\full\xyz_backup.bak' with init, nounload, name='xyz_full_backup', noskip, stats = 10, noformat;
The account I'm running the command looks like inherited all privileges. How do I check the privileges to make sure?
Thanks
Ami

See the following thread:
http://stackoverflow.com/questions/3960257/cannot-open-backup-device-operating-system-error-5
QUOTE: " Yeah I just scored this one.
Look in Windows Services. Start > Administration > Services
Find the Service in the list called: SQL Server (MSSQLSERVER) look for the "Log On As" column (need to add it if it doesn't exist in the list).
This is the account you need to give permissions to the directory, right click in explorer > properties > Shares (And Security)
NOTE: Remember to give permissions to the actual directory AND to the share if you are going across the network.
Apply and wait for the permissions to propogate, try the backup again.
NOTE 2: if you are backing up across the network and your SQL is running as "Local Service" then you are in trouble ... you can try assigning permissions or it may be easier to backup locally and xcopy across outside of SQL Server
(an hour later).
NOTE 3: If your running as network service then SOMETIMES the remote machine will not recognize the network serivce on your SQL Server. If this is the case you need to add permissions for the actual computer itself eg. MyServer$. "
Link:
Cannot open backup device. Operating System error 5
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Similar Messages

Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.).

SQL 2005 Enterprise
Even if I logon as Administrator and try to backup any of my databases to local partitions, I get this error below. I have been operating fine up until this point and doing backups all the time. As far as I know, and after checking, no permissions have changed and of course Administrator has ntfs permissions to my local C and other partitions on this server:
TITLE: Microsoft SQL Server Management Studio
Backup failed for Server 'servername'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.). (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
BUTTONS:
OK
In the Event log for Windows Server 2003 I see this:
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10016
Date:  3/6/2006
Time:  3:35:06 PM
User:  NT AUTHORITY\NETWORK SERVICE
Computer: servername
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{BA126AD1-2166-11D1-B1D0-00805FC1270E}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

SQL Service account is DOMAIN\SQLAdmin
Have given the SQLAdmin AD account access to the Backup shares on the file servers (2 file servers, FILE1, FILE2)
and I still get the error
Operating system error 5(Access is denied.).
RESTORE FILELISTONLY
FROM DISK = N'\\SERVER\APPS\backups\UA\DB\DB.BAK'
I trid to attach it as device, which runs
sp_addumpdevice 'disk', 'Network_Share', '\\SERVER\backup\APPS\UA\DB\DB.BAK'
BUT when restoring, same error occurred (Access denied)
Only case I can backup/restore to/from network shares, is from the machines where SQL Server runs (SQL1, SQL2)
e.g. I copy the BAK file from FILE1 to SQL2, share the folder (add SQLAdmin account with access), then restore on SQL1 with file from SQL2 Share
RESTORE FILELISTONLY
FROM DISK = N'\\SQL2\backups\UA\DB\DB.BAK'

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. Master

I am getting the following event every minute in the event log:
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. Master
+
System
Provider
[ Name]
MSSQLSERVER
EventID
17053
[ Qualifiers]
49152
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-07T10:55:22.000000000Z
EventRecordID
4171276
Channel
Application
Computer
ClinSQL.clinlogix.com
Security
EventData
UpdateUptimeRegKey
5(Access is denied.)
9D420000100000000800000043004C0049004E00530051004C000000070000006D00610073007400650072000000
Binary data:
In Words
0000: 0000429D 00000010 00000008 004C0043
0008: 004E0049 00510053 0000004C 00000007
0010: 0061006D 00740073 00720065 0000
In Bytes
0000: 9D 42 00 00 10 00 00 00 B......
0008: 08 00 00 00 43 00 4C 00 ....C.L.
0010: 49 00 4E 00 53 00 51 00 I.N.S.Q.
0018: 4C 00 00 00 07 00 00 00 L.......
0020: 6D 00 61 00 73 00 74 00 m.a.s.t.
0028: 65 00 72 00 00 00 e.r...
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider
Name="MSSQLSERVER" />
<EventID Qualifiers="49152">17053</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2012-07-07T10:55:22.000000000Z" />
<EventRecordID>4171276</EventRecordID>
<Channel>Application</Channel>
<Computer>ClinSQL.domain.com</Computer>
<Security
/>
</System>
- <EventData>
<Data>UpdateUptimeRegKey</Data>
<Data>5(Access is denied.)</Data>
<Binary>9D420000100000000800000043004C0049004E00530051004C000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Appears to be with the Master database. I tried changing the SA password but did not correct the problem.
Any ideas?

UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. Master
It looks like the SQL Server service account doesn't have the needed registry permissions. This may be because the account was changed directly using service control manager instead of using the SQL Server Configuration tool.
Try changing the SQL Server service account using the SQL Server Configuration tool to another account temporarily and then back to the desired one and restart SQL Server. This should assign the permissions the service account requires.
Dan Guzman, SQL Server MVP, http://weblogs.sqlteam.com/dang/

Project Server 2010 PWA Provisioning Error - System.UnauthorizedAccessException: Access is denied.

Hi,
When migrating from a Prod Environment to a Test Environment using the Project Server 2010 5 Database backup and restore process (actually 6 DB's with the Project Sites DB), upon encountering a failure during provisioning the PWA Instance, we get the errors listed
at the base of this posting in our Event Logs.
To clarify what we have done already, we have:
1. Backed up the 6 databases from the Source Environment.
2. Removed the existing PWA_Content and PWS_Content (Project Sites) databases from the Target Environment Farm.
3. Restored the 6 databases in the Target Environment.
4. Given the SP Farm Service Account 'db_owner' rights to each of the 6 restored databases.
5. Added the PWA_Content and PWS_Content databases (exact same names) to the Target Environment.
6. Locked down (offline/stopped), all of the SharePoint Content databases in the Farm except for the PWA_Content database.
7. Run the PWA Provisioning process from the 'Project Server' SharePoint Service in Central Admin.
It is during the PWA provisioning that we encounter these errors.
As the Target Environment is for Test/Dev purposes, the SP Farm Service Account is setup to support all of the SharePoint Farm Services, is in the Local Admin Group of each of the Servers (App, WFE and DB), and is actually in the sysadmin
role on the DB Server.
Any suggestions on what is causing this denied access situation would be most appreciated.
Cheers,
Wayne
Event Log Entries:
============================================
Log Name:      Application
Source:        Microsoft-SharePoint Products-Project Server
Date:          1/22/2014 2:47:34 PM
Event ID:      6971
Task Category: Provisioning
Level:         Error
Keywords:
User:          ACCOUNTS\svc_psfarm
Computer:      SERVER.accounts.domain.com
Description:
Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Membership synchronization failed. ---> System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
   at Microsoft.SharePoint.Library.SPRequest.AddRoleDef(String bstrUrl, String bstrName, String bstrDescription, Boolean bHidden, Int32 lRoleOrder, UInt64 iPermMask, Byte iType, Int32 lRoleDefID)
   at Microsoft.SharePoint.SPRoleDefinitionCollection.AddCore(SPRoleDefinition role)
etc....
Failed to create the Report Center web (Exception: PSI Entry Point:
Project User: DOMAIN\svc_psfarm Correlation Id: c0a30b18-46e4-4447-b469-f8fd3bb1490a
PWA Site URL: http://pstest2010/PWA
SSP Name: Project Server
PSError: NoError (0))
Failed to grant 'DOMAIN\svc_psfarm' access to web application 'SPWebApplication Name=Portal'.
Error: System.Security.SecurityException: Access denied. Only machine administrators are allowed to create administration service job definitions of type: Microsoft.SharePoint.Administration.SPUpdateWorkerProcessGroup, Microsoft.SharePoint, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c.
   at Microsoft.SharePoint.Administration.SPAdministrationServiceJobDefinition..ctor(String name, SPService service, SPServer server, SPJobLockType lockType)
   at Microsoft.SharePoint.Administration.SPUpdateWorkerProcessGroup..ctor(SPTimerService timerService, String[] loginsToAdd, String[] loginsToRemove)
   at Microsoft.SharePoint.Administration.SPWebApplication.GrantAccessToProcessIdentity(String username, SPPolicyRoleType policyRole)
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.GrantAccessToWebApp(List`1 webApps, String userName) The Zone of the assembly that failed was: MyComputer

Is the Test and Production in the same domain. If they are not, then the SIDs associated with the SQL accounts may look the same but they are not. At times, I have had to recreated accounts when in different domains.
I would also use PowerShell cmdlets and see if it finds any issues, such as Test-SPContentDatase.. Validate the SharePoint content databases, because if not setup properly the Provisioning will fail.
Also check these properties.
$web=get-spweb http://prodproj01/pwa
$Web.AllProperties[“PWAURL”] ### see what the value is.. you may have to blank it out, specially if it is pointing to a different URL
Here is how to fix.
$Web.AllProperties[“PWAURL”]=””
$web.Update()
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

hello,
i getting the following error message in event id while backing up my SQL db by third party backing tool
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
<Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
please suggest the solution.

Hi pulkit,
According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
https://support.software.dell.com/kb/SOL14674
In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
Perform the following tasks as appropriate:
1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
2. Ensure that the backup and restore medium has sufficient space.
3. Correct any errors raised by third-party backup and restore software.
There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
http://technet.microsoft.com/en-us/library/ms187510.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

An error was received while reading backup file- Cancelling Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).

Hi,
We have been getting the below error while restoring a database onto SQL Server 2008. We are using lite speed and performing a full restore. When we restart the server, the restore is completed cleanly but every 3 or 4 days once, the restore is failing.
We have tried everything from installing a patch that was supposed to fix it but it is not.
Error Message:
BackupIoRequest::ReportIoError: read failure on backup device 'VDI_7D17E958-2468-45A8-B7F0-EB73D0BF0F3A_3'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
The backup is getting validated successfully but failing while trying to read it. Any help would be greatly appreciated.
Thanks,
Sree

Hello,
I would try to get the latest update for the LiteSpeed software, based on the following thread:
http://www.red-gate.com/messageboard/viewtopic.php?t=5968
Please read the following article too:
http://troubleshootingsql.com/2011/02/09/troubleshooting-that-darn-backup-error/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank you

Hi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

Filestream Creation Unable to Open Physical File Operating System Error 259

Hey Everybody,
I have run out of options supporting a customer that is having an error when creating a database with a file stream. The error displayed is unable to open physical file operating system error 259 (No more data is available). We're using a pretty
standard creation SQL script that we aren't having issues with other customers:
-- We are going to create our data paths for the filestreams.
DECLARE @data_path nvarchar(256);
SET @data_path = (SELECT SUBSTRING(physical_name, 1, CHARINDEX(N'master.mdf', LOWER(physical_name)) - 1)
                  FROM master.sys.master_files
                  WHERE database_id = 1 AND file_id = 1);
-- At this point, we should be able to create our database.
EXECUTE ('CREATE DATABASE AllTables
ON PRIMARY
    NAME = AllTables_data
    ,FILENAME = ''' + @data_path + 'AllTables_data.mdf''
    ,SIZE = 10MB
    ,FILEGROWTH = 15%
FILEGROUP FileStreamAll CONTAINS FILESTREAM DEFAULT
    NAME = FSAllTables
    ,FILENAME = ''' + @data_path + 'AllTablesFS''
LOG ON
    NAME = AllTables_log
    ,FILENAME = ''' + @data_path + 'AllTables_log.ldf''
    ,SIZE = 5MB
    ,FILEGROWTH = 5MB
GO
We are using SQL Server 2014 Express. File streams were enabled on the installation SQL Server. The instance was created successfully and we are able to connect to the database through SSMS. The user is using an encrypted Sophos.
We have tried the following:
1. Increasing the permissions of the SQL Server server to have full access to the folders.
2. Attempted a restore of a blank database and it failed.
There doesn't seem to be any knowledge base articles on this particular error and I am not sure what else I can do to resolve this. Thanks in advance for any help!

Hi Ryan,
1)SQL Server(any version) can't be installed on encrypted drives. Please see a similar scenario in the following link
https://ask.sqlservercentral.com/questions/115761/filestream-and-encrypted-drives.html
2)I don't think there is any problem with permissions on the folder, if the user can create a database in the same folder. Am not too sure. Also see the article by
Jacob on configuring the FILESTREAM for SQL Server that describes how to configure FILESTREAM access level & creating a FILESTREAM enabled database
Hope this helps,
Thanks
Bhanu

Report Server srsrp.log - (!) InitializeSrsWhenNeeded error = Access is denied.

Hello,
since about one week our sccm primary server shows the following error message in the srsrp.log file every minute:
Confirmed version [11.0.5058.0] for the Sql Srs Instance. SMS_SRS_REPORTING_POINT 16.07.2014 16:18:25 4100 (0x1004)
Extract resource language packs if exists SMS_SRS_REPORTING_POINT 16.07.2014 16:18:25 4100 (0x1004)
Loading localization resources from directory [C:\Program Files\SMS_SRSRP\SrsResources.dll] SMS_SRS_REPORTING_POINT 16.07.2014 16:18:25 4100 (0x1004)
Looking for 'German (Austria)' resources SMS_SRS_REPORTING_POINT 16.07.2014 16:18:25 4100 (0x1004)
Looking for 'German' resources SMS_SRS_REPORTING_POINT 16.07.2014 16:18:25 4100 (0x1004)
Falling back to 'en' resource set SMS_SRS_REPORTING_POINT 16.07.2014 16:18:25 4100 (0x1004)
Next security configuration at [16.07.2014 16:26:24] SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Retrieved datasource definition from the server. SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at CM_MED SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Successfully get report server from Registry SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Moved folder from /CM_MED to /CM_MED.OLD.1. SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Created folder [CM_MED]. SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Creating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at CM_MED SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
(!) InitializeSrsWhenNeeded error = Access is denied. SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Failures reported during periodic health check by the SRS Server atmeds172.medel.local. SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Registry change SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT 16.07.2014 16:18:26 4100 (0x1004)
i have spent two days trying to fix this, including:
- reset the reporting service AD account
- create a new reporting service AD account
- change report server to "local system" instead of AD account
- reinstall the reporting role several times
- reinstall the entire SQL reporting server service
- delete the reporting db and all related objects on the filesystem
- modify permissions of reporting service user (full admin on OS and SQL level, as well as in reporting server roles)
- install a new vm with SQL server reporting services (the error does not happen on this new machine)
at the moment, sccm is creating a new "CM_MED.OLD.xxx" folder in reporting server every minute in a loop.
how can i solve this?
Environment is Server 2012R2, sccm 2012r2 cu2, SQL 2012 sp2.

this is what i see in reportserver logs:
library!ReportServer_0-3!1eec!07/17/2014-08:46:05:: i INFO: Call to CreateFolderAction(ConfigMgr_MED, /).
library!ReportServer_0-3!1414!07/17/2014-08:46:05:: i INFO: Call to GetDataSourceContentsAction(/ConfigMgr_MED/{5C6358F2-4BB6-4a1b-A16E-8D96795D8602}).
library!ReportServer_0-3!1414!07/17/2014-08:46:05:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: , Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_MED/{5C6358F2-4BB6-4a1b-A16E-8D96795D8602}'
cannot be found.;
library!WindowsService_6!a3c!07/17/2014-08:46:14:: i INFO: Call to CleanBatch()
library!WindowsService_6!a3c!07/17/2014-08:46:14:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_6!a3c!07/17/2014-08:46:14:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-3!f64!07/17/2014-08:46:35:: i INFO: Call to CreateDataSourceAction({5C6358F2-4BB6-4a1b-A16E-8D96795D8602}, /ConfigMgr_MED, True).
the "CreateDatSourceAction" seems to complete successfully, as the datasource is created in the ConfigMgr_MED Folder. immediately afterwards i get the error message in srsrp.log.

The Deploy Software Updates Wizard completed with errors - Access is Denied

Hello, I am trying to download some updates that were synced up to the SCCM's database from another WSUS server. I am not able to get it done because the wizard fails with the access is denied error. I checked patchdownloader.log file and saw Error code
= 5 which means access denied. I tried to change permissions on the "updateservicespackages" folder within the folder, and I have full NTFS permissions for system, administrators, and read only permissions for everyone. Same thing goes for
the share permissions. My account is in the administrators group. The only way I can get it to work is by granting full permissions to "everyone", but that cannot be security friendly. Which account is "Deploy Software Updates Wizard" using
so that I can properly give it the required rights?

Hi,
You could have a look at the thread below. Lucas used ProcMon that shows an access denied with the user which he was using. Permission via group wasn't enough. Give your user full share/security access and everything works fine.
https://social.technet.microsoft.com/Forums/en-US/99859604-a803-43f3-a172-159a500fcb90/the-deploy-software-updates-wizard-completed-with-errors-access-is-denied?forum=configmgrsum
Best Regards,
Joyce

2 probs! HDD Formatted and no recovery discs and "1962 NO Operating System" error message

Hi, I have had my Lenovo Idecentre B540 for approx 2 weeks now and my hard drive had to be formatted and windows reinstalled. However, this means the partition is lost and i had no recovery disc or drivers disc with it so have been unable to get the touchscreen working and probably missing out on all the features that were the reasons for buying this machine.
Running Windows 7 home premium and have downlaoded all the drivers from the support page on here but nothing there for the touch panel drivers and cant find it or ideatouch 4.5 online either.
I would like a disc sending to me or a link to be able to downlaod please.
Also now i have had
"1962 no operating system" error message when booting. ANy known reason for this? Lots of guesses online but no concrete answer.

You might look at this thread and you might also do a search: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/LENOVO-IDEACENTRE-B540-ONE-KEY-RECOVERY...

Backup returning "Operating System Error 5 (access is denied)"

Similar Messages

Maybe you are looking for