Backwards Navigation and automatic marking of "incomplete"

Hello and thank you for your help in advance.
Here is the scenario: a learner is on a question and they click the Back button and because we want them to be allowed to refer back to the material before answering the question OR they click the slide back button on the skin's playbar to refer back (either way it is the same error)....after referring back to the content, they have the answer in mind so they navigate back to the question and they are unable to answer it now because it says:
Furthermore, here are our current quiz preferences settings we have, you will notice that "Allow Backwards Navigation" IS checked off, I'm not sure what to do
The programming remedy you would think is that the "Allow backward movement" check mark does nothing but prompt you to hide the back buttons or display them, it does nothing in the background in regards to ignoring incomplete questions. This check mark needs to also ignore incomplete questions when navigated away from the slide.

The Quiz scope concept I was not aware of, thanks for that!
I just have one final hangup to get thist to work. I found a solution on a previous thread where you helped someone, their workaround is as follows:
"I put a white button with white frame on a white background before the first quiz slide, and make it report to lms as 0 points, so it's a "hidden" button that does nothing. Now the user will never go out of "quiz scope".
I want to put this invisible button on the very first slide so that they will never go out of quiz scope no matter where they navigate, however I do not want it to add to the Quiz results total on the Quiz results slide (when I uncheck "Add to total" under Reporting for the Button's properties is still adds it to the total:
Also, I do not want it to add to the total number of questions on the progress indicator (the first question still says Question 2 of 4 when it should be the 1st question), finally I am not sure how this user above changed it to report to LMS as 0 points, when I try to change the points from 1 to 0 it always defaults back to 1, I also have unchecked "Report answers". Once this is resolved the company will be full of happy Captivate users.
Thank you for your help!

Similar Messages

Step backward, undo and automatic layer changes.

A feature of Photoshop that has always annoyed is the way the Photoshop handles stepping backwards. It's taken me years to finally get motivated enough to post something about it, but so be it, lol.
Say I'm working on layer 2, and switch to layer 3. I then make two brushstrokes on layer 3. I decide I don't like these brushstrokes and remove them by "stepping backwards" twice. I'm now back on layer 2. At best, in this very common scenario, I have to annoyingly reselect layer 3 to continue working, and at worst I might accidentally do work on the wrong layer if I'm having an off day. The default undo is obviously useless in this scenario because of it's mutation in Ps as a method of comparing single changes. There is apparently no option to simply go back two steps and continue working on layer 3. I contacted Adobe support and was told so, more or less. I"ve also requested a feature change. My current workaround for such methods is to habitually do some form of a useless edit to layer before doing actual work so that I never undo back to the wrong layer or waste time reselecting the layer I want.
Why on earth does Ps not give us the option to turn off this behavior? I'm baffled as to why Ps even works this way in the first place. As someone that primarily uses Ps to paint and illustrate, it would be amazing to be able to lock your selection from everything except manual changes. For what it's worth, I've seen people that have raised this issue elsewhere get unfairly buried by quite a few PEBKAC replies. That being said, it should be obvious that there's nothing I could do differently, in the way I'm working above, to alleviate this problem. When you find yourself having to work around a mandatory "feature", perhaps it's time is should be addressed?
Furthermore, I've read that there is a script available that will eliminate this problem, but I have my suspicions that it may be outdated for the most current form CC. Does anyone run such a script for the most recent version of Ps?

This has indeed been discussed many times in the past. Alas, I wouldn't hold my breath waiting for changes.
The thing is, these are user forums although some staff sometimes drop by, so not a conduit to address Adobe officially.

Mail closes automatically and re-marks messages as NOT Read

After I open Mail and start to read messages, it closes automatically without warning and re-marks all messages I read as NOT read. I have tried resetting and even Restoring but still the same. How can I fix this problem?

I have exactly the same problem on my iPod Touch (latest) which has developed in the last few days. Before that there were no problems since I bought it in September (with Mail or anything else). I can download mail without trouble on my computer, and all the other apps on the iPod work fine, including internet access. I have checked the software is up-to-date and also restored the settings via the iTunes summary page. I've also deleted almost all e-mails on the webmail page of my ISP. Still the same.
Desperate,
Gandar

Messages automatically marked as read in yahoo and unread in Mail

I typically use yahoo.com to view/read my yahoo mail, but I would like the option of viewing in Mail as well. However, when I launch my Mail account, all messages remain "unread" (whether I've read them or not in yahoo.com). And when I go to my yahoo.com account after opening Mail, all messages (whether I've read them or not in Mail) are automatically marked as "read". This is extremely frustrating as I would like both Mail and yahoo.com to reflect read and unread emails appropriately.
I do not have this problem when I use the Mail app on my iPhone.
Please help! Thank you!

UPDATE: In addition to all mail being marked as "unread" in yahoo.com, most messages older than a few days old are also deleted. They still appear in Mail, but I need to read them in yahoo.com as well. In addition, Mail does not contain the folders from yahoo.com, so all messages appear in Mail as one big "unread" mess in my inbox. Again, these issues are not a problem with the iPhone app. Thank you!

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Sections and Automatic Table of Contents

Hello there,
I have encountered a problem with InDesign while trying to make an automatic TOC for a journal I am working on. It has something to do with Sections.
So I have a book with several indd files. The very first indd file is called "frontpages" which includes the cover page, the inside cover, the leaf page, then two facing pages for the table of contents, then followed by the last page (Letter from the Editor).
This is followed by my second indd file called "newsbeats" which has 5 pages.
Now, what I wanted to do was mark the frontpages' page numbers using lower case roman numerals (i, ii, iii, etc.) Of course I do not want to include the cover page and the inside cover, so I want to start (i) with the leaf page, (ii) and (iii) marks the table of contents pages, and finally (iv) for the Editor's Letter. I did this by starting a section at the leaf page, START PAGE NUMBERNG AT: 1, and selecting the (i, ii, iii...) option. It worked, while leavingboth the cover page and and the inside cover with markers (a) and (b), which I previously set (because I do not know how to just get rid of the page number...)
Now, my book pages actually starts page (1) in the first page of the "newsbeats" document. So to do that, I made another section on the newsbeats first page, START PAGE NUMBERING AT: 1, and selected (1, 2, 3...). That works, too.
So at the moment, I have 3 sections to my page numbers: 1) the lower case letters (a, b) section for the cover page and inside cover, respectively; 2) the roman numerals section (i, ii, iii...) for the leafpage, table of contents, and Editor Letter; and lastly, 3) the arabic letters (1, 2, 3...) starting from the newsbeats document all the way to the last page of the last indd of my book.
Hope it is clear enough. Now here comes the problem:
When I try to create an automatic Table of Contents, it correctly finds my chapters (i used the style for each journal article's title) and lists them. The problem is, the page numbers do not appear correctly. Instead, it shows "a" on EACH AND EVERY table of contents ENTRY. I tried some trial and error, and found out that the pages shown (a bunch of "a") is actually the COVER PAGE'S (a) page number....
I tried for hours searching on topics like "Sections and Automatic TOC" or "How to selectively choose which pages to include in a TOC".. But I found none.
Your help would be really appreciated. I can easily manually type the page numbers (my journal only has 9 articles), but I wanted to do this in a very systematic way, so it would be a lot easier if in any case, there are more than 9 articles for next year's publication.
THANK YOU SO MUCH!
- Larry
PS: I attached a file showing the generated table of contents (on the ii-iii page that I wanted it to appear on), with the frontpages page panel, which shows the page numbering as well. Also I included the Book Panel, so you see how the pages are set up.

We definitely experienced the same issue. Seems like pages just get lost. This is the approach I took:
On the groups main page we just added a link called 'View All Articles' wrapped in a h1 tag (to make it very big and visible to the user) using the following url:
search/?q=%20
The resulting page will search for every article with a space in it and return the results. Still not the most elegant solution but it works. I'd like to implement it right into the xsl file but haven't found very much documentation to aid in this.

How to make backwards navigation through slide shows possible?

Hi, I just made my first Encore DVD slide show and spent hours trying to figure out how to do this without a luck. The DVD is one Main Menu with buttons to different slide shows that are all set to manual advance. The end action of each slide show takes to the first image in the next slide show and that was easy and very obvious to achieve in Encore but I didn't find any way to achieve the same for backwards navigation. Does anybody know how to do that.
Will appreciate any help

In case my message wasn't clear, I will try to describe better what I want to achieve.
Currently the viewer starts from a Main menu with 16 buttons linked to 16 slide shows. Starting from the first or any slide show and pressing the next button after an image is displayed, the viewer can see linearly all images in all slide show from that point to the end without ever going to the main menu.
However if the viewer at any point start pressing the previous button on the remote control, he/she can only go to the start of the current slide show and the only way to get to a previous slide show is to use the Main menu button and then jump from there.
Is it possible to make a DVD thata will allow the view to go backwards through different slide shows by pressing the previous button??

Is different tabbing order behavior between Custom and Automatic order a known issue?

Good morning,
I'm trying to debug a tabbing order issue where tabbing jumps over the instances of a repeating subform added at runtime only to return to them at the end of the tabbing sequence.
Is this a know issue? If so, has it been fixed in newer version of Reader or Designer? I'm 98% sure this used to work before we installed service pack 1 for LC Designer ES. Here are the product versions currently used:
LiveCycle Designer ES 8.2.1.4029.1.523496
Adobe Reader 9.4.0
Additional Information
The hierarchy view looks like so (omitting fields for simplicity purposes):
form1
     Subform1 (repeats)
     AddButton (button adding instances of Subform1)
     Subform3
tabbing result after adding instances of Subform1:
1. Subform1[0]
2. AddButton[0]
3. Subform3[0]
4. Subform1[1]
5. Subform1[2]
expected results:
1. Subform1[0]
2. Subform1[1]
3. Subform1[2]
4. AddButton[0]
5. Subform3[0]
I built a simplified version of the form to isolate the source of the problem and noticed that I can reproduce the problem only when tabbing order is set to 'Custom'. The 'Automatic' order works fine. However most of the forms we're working on uses Custom order.
I've tried removing the 'operation' tag in the XML Source as it sometimes fixes issues however it didn't this time. Using script to set focus on the exit event is currently considered but not ideal. It does not handle backward tabbing and will need to be manually removed later when forms are migrated to a newer version of ES/Reader.

Yes, that behaviour is as expected. Out of order logging affords some performance improvements, particularly on machines with many CPUs.
In iWS 6.0, you can set buffers-per-file="1" on the Init fn="flex-init" line to force iWS to log accesses in order.

Metadata Navigation and Library Column Filter Bug

To whom it may concern,
When document library metadata navigation is enabled and a user clicks an item in the metadata navigation part, the library updates to reflect the selected filter. Subsequent filtering actions performed on columns in the library do not filter the list
further. For visuals refer to the thread below.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ab5c7d15-14e7-470a-8120-71d049a104d3/list-metadata-navigation-and-columns-filters-not-working?forum=sharepointgeneral
My reason for re-posting this is 2 fold.
1. The answer to the thread above is not an answer, it is a work around.
2. Presenting the option for a user to continue filtering a view, but having that option do nothing is a bug. The option should be hidden, or it should perform the expect action.
Please either inform me of an expected timeframe for resolution, or point me to an exacting set of steps to take in order to escalate this issue to someone who will take action to fix it.
Thanks

Hi,
According to your description, my understanding is that column filtering cannot work after filtering on the managed navigation in SharePoint.
I tested the same scenario per your post in my environment, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Is there a way in 4.0 to get back button that hides navigation and bookmark bars?

I used to have Firefox version 3.6.something, and in it there was an elongated bubble at the very top right of the window which when pressed would hide the navigation and bookmark toolbars. (This button also exists at the top right corner of Adobe Reader, for instance.) It seems to be missing in version 4.0.
Is there a way to get it back (similar to how it's possible to get back the old status bar)?

Thank you, I know shortcuts are always an option but I was hoping for a more... automatic? solution. I've resorted to forcing links to new tabs that are "to other sites." It has solved my immediate problem, but still is a bit screwy.
Thank you for the help, though. :]

Change color for trim and registration mark

The trim and registration marks are having the color name "All" in the generated pdf from InDesign. Any one help me out on how to change the color to K (black) while generating PDF out of InDesign.

JohnAD77 wrote:
Is it possible to make to 4/c to 1/c (black 100%) while generating PDF itself without adding marks in the document?
Maybe, in CS6, by exporting to Grayscale, but this will make everything black ink only. Otherwise, no.
To add your own marks, add a slug area to the file, draw whatever you want for marks in that area, using [Black], and turn off automatic marks in the export dialog, but Include Slug Area under the bleed settings.

Search Results Web Part, Managed Navigation and Paging

I am using managed navigation and have a search results web part that uses the Term.IdWithChildren as the query to filter the results by the selected navigation term. This works nicely until you need to us the paging. As soon as you go to the next page there are
no results.
It would appear that as soon as the URL has the #k=#s=11 added it looses the navigation term. This is a core part of the Sharepoint solution that I'm delivering and I cannot progress this any further and I'm going round in circles. I have another results
page that has the search results webpart on but doesn't use the navigation term filtering and the paging works fine.
As an alternative I was looking at writing my own search results web part, can I do this and render the sharepoint display templates somehow?
Any help would be appreciated.
Stuart

Hi Stuart,
i suppose you may need to check your design regarding this custom coding,
as i know, when i tried previously, i didn't take any attention on the query result, so that it appear as no result.
please have a check this links, it helped me once,
http://technet.microsoft.com/en-us/library/gg549981.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/59e6e258-294d-44b2-996a-547e4e9f519d/customize-search-statistics-and-search-paging-web-parts
http://kamilmka.wordpress.com/2012/04/14/customize-sharepoint-search-results-paging/http://blogs.msdn.com/b/sanjaynarang/archive/2009/02/20/handling-paging-and-total-results-count-in-sharepoint-custom-results-page.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Reg:process chains could be started manually and automatically

Hi
Each process chain could be started manually and automatically
>If i want to start the process chain manually, how should i start and what are the settings shall i mark
>If i want to start the process chain automatically, is there any tool are there to start the process chain at that particular time
Plz clarify my doughts it is use full too me
Thanks & Regards
manikanta

Hello,
PC can be started both manually and automatically.
Every PC has a start variant, when you right click on the start variant and go in the edit option, select the option direct scheduling. Then in change selection, check the box immediate and keep the periodic job at the bottom unchecked.
Hit the tick, save on the other screen. And when back on the PC screen, from the menu option select the schedule option.
This will run the chain manually.
To run it automatically, follow the same procedure but instead of using immediate choose, data and time, provide date and time when you want to run, you can check periodic option if you want the chain to run daily, weekly or monthly.
Regards,
Shashank

Initial State of Navigation Panel - Automatic not working

Hello,
I have several iViews where I have set Initial State of Navigation to Automatic, which should collapse detailed navigation if there is nothing on it to display. However, it always comes up open even though it is blank. Is there anything else that needs to be down to make it work? We are on EP7 SP14.
Thanks,
Alex

Could you check your Portal Desktop Innerpage to check if there is some other iViews also on the left hand side where detail navigation iView is residing? Sometime another iView named Favorites is added there. So it might be the case though detail navigation is not there still it is showing the blank portal favorites iView on the left side.
To check this Open you portal framework page -> Open Desktop Innerpage -> See if there is anything except Content Area and Detailed Navigation there. Check the Innerpage layout to see where these iViews are placed in side the page.
Regards,
Shubhadip

Check marks and question marks all over my icons

Hello!
Sometime in the last few days I've noticed that a bunch of the icons in my Finder have strange little question marks and check marks on them. I first noticed a check mark on the icon for the hard drive, but when I looked closer they turned out to be everywhere! here's a screen shot of what they look like:
http://www.theamazingrolo.net/marks.jpg
(i just took a screenshot of the info windows to make it more clear, but the marks can be seen in any finder window)
What on earth are they about?! Any ideas? They kind of bug me, to be honest.
Thanks!
Yann
(white Macbook running 10.5.5)

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore is not, in itself, a solution.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. The command may take a noticeable amount of time to run.
Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

Backwards Navigation and automatic marking of "incomplete"

Similar Messages

Maybe you are looking for