Packaging a .bar file for the BlackBerry Tablet (Playbook) Simulator Using Command Line.
Hi there, I've been trying to deploy one of my AIR apps on the BlackBerry Tablet (PlayBook) Simulator and and have run into a problem packaging the .bar file using the command line. I started this off by reading the article at:
http://www.adobe.com/devnet/devices/articles/blackberry_playbook_battery.html
I followed some of the steps there, but found this article on how to package my files using a command line more helpful (the Adobe article doesn't even explain how to package the .bar file using the command line):
http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Compile-and-Debug-witho ut-Flash-Builder-Using-a-Command-Line/ta-p/628675
Everything was going great until I went to compile my application and received the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: com/qnx/bbt/airpackag
er/BarAirPackager
Caused by: java.lang.ClassNotFoundException: com.qnx.bbt.airpackager.BarAirPacka
ger
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: com.qnx.bbt.airpackager.BarAirPackager. Program
will exit.
Has anyone run into this issue when trying to package a .bar file for the BlackBerry Tablet (Playbook) Simulator? I've tried using a SWF published in CS5 and CS4.
Just thought I'd reply to my own post, in case someone else runs into this problem. Make sure you have the latest and greatest versions of the JDK and JRE installed on your system, in addition to the requirements listed in BlackBerry's list of installs:
http://us.blackberry.com/developers/tablet/adobe.jsp
Similar Messages
-
Revision: 11585
Author: [email protected]
Date: 2009-11-09 13:39:53 -0800 (Mon, 09 Nov 2009)
Log Message:
Initial check-in of CoreTech's pixel bender kernel files for the pixel bender filters we use to mimic AIM blendModes based on Vera's ok. Added the standard Flex copyright headers to what Core Tech passed along.
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Me
Tests run: Checkintests
Is noteworthy for integration: Yes, perhaps, to downstream teams that want to rebuild the pixel bender filters
Added Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo r.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rBurn.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rDodge.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Excl usion.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Hue. pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Lumi nosity.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Lumi nosityMaskFilter.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Satu ration.pbk
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Soft Light.pbk -
How to change the owner of a GPO using command line/script? - More than 200!
I have more than 200 GPOs on the AD DOmain
Half of the GPos were created by sveeral different people or are owned by the domain admins
How can I change all of then, to a new owner, using the more "quick and easy" method?
there a tool/utility for that? (like icacls.exe/subinacl.exe?)
There is a VBS function or PS cmdlet?Hi,
How is it going? Are the suggestions provided by the above replied helpful? If you need further help regarding this issue, please don’t hesitate to let us know.
Besides, for scripts, in order to get better help, we can ask for suggestions in the following scripting forums.
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Windows PowerShell
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen -
How to use command line with acrobat to extract page(s) from pdf file?
I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
ThanksI can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated. -
Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems -
Adobe Reader for the BlackBerry PlayBook Showstopping Issue: App does not start
Hello;
I would like to report an issue with the Adobe Reader app for the BlackBerry PlayBook which renders the application fully unusable. This issue occurs everytime. This issue has been tested and verified to occur in two distinct BlackBerry PlayBook devices.
Here is a screenshot stating what version (10.0.3.325) of the Adobe Reader app I have installed:
This, I understand, is the latest version for my platform. Unfortunately, the application does not start. Attempting to run it results in a blank screen after showing the BlackBerry logo. The blank screen can be seen in the following screenshot:
It is also strange that the application does not appear in the Application Permissions list, as seen in the following screenshot:
Is there a fix for this showstopping issue? What steps should I take?Same issue here. Playbook support knows about it, and referred to Adobe. The Adobe forum has this comment. Looks like our Playbooks are abandoned as a platform.
"Mar 4, 2012 7:20 PM
As the tablet market continues to evolve, we continue to evaluate how to best support the market and where to focus on our resources. Because of this, Adobe has decided to end its support of the RIM QNX Playbook devices in March 2012. This means the ability to create new applications for submission to the RIM store will no longer be possible in Adobe Viewer Builder as well as the ability to rebuild existing targets for new releases of Digital Publishing Suite. Any existing QNX targets will be removed from the manage view inside Viewer Builder". -
Package Java ANE file for desktop
Hi!
I'm trying to package an ANE file for desktop and am almost bald now :/.
I just made an HelloWorld extension with a simple "sayHello" method that simply returns the string "Hello World".
I made a JAR file of it, created the extension's XML definition as follow :
<extension xmlns="http://ns.adobe.com/air/extension/3.1">
<id>com.nurun.helloworld</id>
<versionNumber>1.0.0</versionNumber>
<platforms>
<platform name="Windows-x86">
<applicationDeployment>
<nativeLibrary>HelloWorld.jar</nativeLibrary>
<initializer>com.nurun.ane.hw.HelloWorldExtension</initializer>
<finalizer>com.nurun.ane.hw.HelloWorldExtension</finalizer>
</applicationDeployment>
</platform>
</platforms>
</extension>
I compiled my SWC, extracted the library.swf file out of it (is it still necessary or ADT finally does it itself.?) and use theDamn CTRL+S.. someday i'll stop doing this on my browser. Weird that it submits the post anyway :/..
So, i use this batch file to package the ANE :
set sdk_directory=D:\Softwares\flex_sdk_4.6.0.23201B
set air_directory=%sdk_directory%\bin
set root_directory=D:\NativeExtensions\HelloWorld\
set library_directory=%root_directory%\flash\assets
set signing_options=-storetype pkcs12 -keystore "D:\NativeExtensions\HelloWorld\flash\assets\certificate.p12" -storepass XXXX
set dest_ANE=%library_directory%\HelloWorld.ane
set extension_XML=%library_directory%\HelloWorldANE.xml
set library_SWC=%library_directory%\HelloWorld.swc
set library_SWF=%library_directory%\library.swf
"%air_directory%"\adt -package %signing_options% -tsa none -target ane "%dest_ANE%" "%extension_XML%" -swc "%library_SWC%" -platform Windows-x86 "%library_SWF%" -C %library_directory%
And all i get is the following error :
Missing native library implementation "HelloWorld.jar" for platform Windows-x86
I put my HelloWorld.jar aside the batch file, tried to put it on a "Windows" folder and many other things... but can't get rid of this error.
I can't find nothing about this error anywhere (neither here http://help.adobe.com/en_US/air/build/WSBE9908A0-8E3A-4329-8ABD-12F2A19AB5E9.html) so i'm a bit stuck.
I'm certainly missing a point here but don't know what.
Any help would be much apreciated because i have no idea where the problem comes from :/
Thanks -
Which are the crucial files for the account settings for mozilla thunderbird?
Hello everyone,
I am syncing my configuration files between multiple pc's via git - now I'd like to finally inherit thunderbird in this, but I can't figure out the bare needed files for the setup of the accounts.
Means: I don't need passwords, mail, attachments, etc. pp. ... - I only need the account settings (name, imap/smtp-server, port-settings, ...), so I don't have to set up nine mail-accounts on every pc and on every reinstall.
Up until now I couldn't find a definite answer (besides 'copy the whole folder', which is no option since it goes through my git-server which has a yearly traffic-limit) I'm asking here.
Thanks in advance
Ps:
An option would be to sync only the files directly in the folder without subfolders, but that wouldn't be clean.prefs.js
-
Hibernate mapping XML files for the two SQL Server tables below.
Hello all..,
Question 1:
I am working on a project that needs to support a database with an inherited legacy schema that you cannot change. The schema is provided below.Hibernate mapping XML files for the two SQL Server tables below. Please provide those two XML files. Assume some hypothetical package and class names. Assume that no "fancy" stuff such as lazy initialization, optimistic locking etc is needed at this time.
CREATE TABLE [SURVEY_ANSWERS] (
[ANSWER_ID] [int] IDENTITY (1,1) NOT NULL,
[QUESTION_ID] [int] NOT NULL,
[POSITION] [int] NULL,
[TEXT] [varchar](350) NULL
CREATE TABLE [dbo].[SURVEY_QUESTIONS] (
[QUESTION_ID] [int] IDENTITY (1, 1) NOT NULL ,
[TEXT] [varchar] (350) NULL
GO
ALTER TABLE SURVEY_ANSWERS
ADD CONSTRAINT pk_SURVEY_ANSWERS PRIMARY KEY(ANSWER_ID,QUESTION_ID);
ALTER TABLE [dbo].[SURVEY_QUESTIONS] ADD
PRIMARY KEY CLUSTERED
[QUESTION_ID]
GO
ALTER TABLE [dbo].[SURVEY_ANSWERS] ADD
FOREIGN KEY
[QUESTION_ID]
) REFERENCES [dbo].[SURVEY_QUESTIONS] (
[QUESTION_ID]
)Question 2:
Assume that you are working on a project developing, say, a banking application. You are the Architect and thinking that Hibernate ORM should be used for the entire access to the relational database. As usual, you have created (or auto-generated) a set of HBM XML files as well as POJOs for which you define the mappings. Assume now that a new requirement has just popped up. The system needs to be able to import new bank accounts and user information in bulk from a very large XML file at once and store it in the database. Assume the XML file contains all necessary information to populate fields in database tables. As performance is very important for this operation. Given this description, how would you approach the problem?
Please describe briefly.
-Thanks and regards
Praveen SoniYou're not fooling anyone Dennis_Mox. But nice try.Jeez, man. Mail me at denismox[at]yandex.ru, I will show you that exact test, dammit.
-
Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!
You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.
-
Help please! When I try to sync my iPhone it tells me it can't find most of my files for the songs in my iTunes library, although the songs are there!!
Can anyone help?
-
why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???
Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop. -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Camera RAW does NOT yet support raw files for the new Canon Sureshot S95
Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asapHello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera -
Folio Builder: An error has occurred opening the source file for the article layout.
I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=trueQuestions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps
Maybe you are looking for
-
Free Goods Regarding u0096 Sales and Distribution
<b><u>Scenario</u> :</b> I. To represent free goods explicitly in Billing & Delivery & to represent the same in the Invoices & Transport & Shipping. II. To make account for the free goods in the accounting and Material documents. a. Here the free goo
-
Creation of new schema based on old schema
Hi, I want to create a new schema with the different name based on the objects of the old schema. For that I created a new user and schema and then imported the dump file into it. But problem is I am not getting the external table structure, except t
-
when i encryapet a drive in windows7 64 bit power loss and my urgent data drive does not open
-
Query Panel unable to show me Radio Group.
Hi Eweryone I am using Jdev 11.1.1.4. I am using a Transient Attribute in my ViewObject1("Updatable = Always") with Static List of Values coming from Different View Object2. I included this Transient Attribute in my View Criteria and assigned a Bind
-
Labview basic vis for controlling Newport ESP6000 controller and 3 axis stages
I have looked in Ni.com's development zone and cannot find anybody who has created or developed Labview code for controlling a ESP6000 Newport controller. Newport provides the basic level dll for use with Labview. Has anybody developed a good basic L