Bad check value found during dbv on Datafiles

Hi,
We just received new DB, that return a "Bad check value found during dbv" on DBVerify.
So, we can Open & Use this DB... perhaps until crash if we use the "bad block", but we can't save it by Rman (ORA-19566: exceeded limit of 0 corrupt blocks for file xxx) !
And best thing is... Previous DB owner don't have any save (Rman or other) of this DB !!!
Are there solution(s) about this problem... or this DB is definitively dead ?
Sorry for my english,
Thank for your help,
J Sourti.

Hi;
What is DB version?
Please see below note(also referance part) and below link which at least show u some way
Rman Reports An Ora-19566: Exceeded Limit Of 0 Corrupt Blocks From Backup [ID 457422.1]
http://oraclespin.wordpress.com/2009/07/03/how-to-find-and-fix-block-corruption-using-rman/
Regard
Helios

Similar Messages

  • Question:rman recover (error:Bad header found during inspecting archived )

    oracle9208 aix5.2
    after restore database successfully,i recover database
    i receive info in alert_sid.log
    Corrupt block seq: 0 blocknum=1.
    Bad header found during inspecting archived log
    Data in bad block - seq:184680448. bno:369098753. time:0
    beg:0 cks:260
    calculated check value: 2653
    Reread of seq=0, blocknum=1, file=/dev/rora_redo1_21, found same corrupt data
    alter database recover datafile list
    161 , 162 , 163 , 164 , 165 , 166 , 167 , 168
    Completed: alter database recover datafile list
    161 , 162 ,
    Fri Nov 6 22:37:17 2009
    alter database recover if needed
    start until time 'NOV 01 2009 21:07:53' using backup controlfile
    Media Recovery Start
    ORA-279 signalled during: alter database recover if needed
    start until time...
    then recover processes hang for a long time
    so why and how can i solve this problem??

    Dear user097815,
    I think there are a couple of syntax errors and it would be better for you to first try each one one-by-one than add them into your "run" block.
    RMAN> allocate channel for maintenance device type 'SBT_TAPE';
    using target database control file instead of recovery catalog
    allocated channel: ORA_MAINT_SBT_TAPE_1
    channel ORA_MAINT_SBT_TAPE_1: sid=910 devtype=SBT_TAPE
    channel ORA_MAINT_SBT_TAPE_1: Data Protector A.06.10/611
    RMAN> allocate auxiliary channel t1 type 'sbt_tape';
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "auxiliary": expecting one of: "channel"
    RMAN-01007: at line 1 column 10 file: standard input
    RMAN> ALLOCATE AUXILIARY CHANNEL c1 DEVICE TYPE sbt;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "auxiliary": expecting one of: "channel"
    RMAN-01007: at line 1 column 10 file: standard input
    RMAN> run
    ALLOCATE AUXILIARY CHANNEL c1 DEVICE TYPE sbt;
    }Hope That Helps.
    Ogan

  • MIGO BADI - Check line item after clicking on  ITEM_OK Field in MIGO

    Hi,
                I am looking for Enhanacement option for MIGO Transaction . What i found it, there is one Badi MB_MIGO_BADI at the creation of material document. When i click on ITEM_OK Field at material line item level. and click on CHECK Button, i want to check material master if that material is having QM View or not . That i can write in one of the method in badi which i found is CHECK_ITEM bt that method is having parameter called I_LINE_ID which have line item no. bt how should i get material doc. no and material no. at that line item?
    Plz try to give me solution.
    Thanks & Regards,
    Saurin Shah

    Hi,
    When you are posting a GR against PO when you check the document
    Method Line_modify of the badi MB_MIGO_BADI is gettin triggered and if you check the importing parameter cs_goitem
    it is getting populated wit the values of the lime item
    Like you said material no, po number, batch no, item no etc.
    Since you can get this details as you said you can check for the view maintained.
    Hope this help you.
    Regards,
    Ranjith N

  • "Errors found during the burning process"

    Hello,
    I created an iDVD project that includes:
    1. 108-minute movie
    2. 6-minute movie
    3. 3-minute movie
    4. 12-minute slide show (3 four-minute slide shows)
    The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
    I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
    Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
    I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
    Larry

    Larry,
    Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
    #0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
    #1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
    Check the list on this download:
    http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
    But here are easy solutions IMHO:
    Get free space on the startup drive -20GB recommended
    Delete the iDVD plist file com.apple.iDVD.plist
    Repair Disk Permissions
    Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
    Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
    Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
    Chapter Markers - don't put one at the end.
    Chapter Markers - don't put one within 2 secs of a transition
    Delete other corrupt preference files (try using Preferential Treatment)
    #2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
    A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
    The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
    OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
    c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
    OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
    Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
    Finally try reinstalling iDVD.......
    If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
    john b

  • [Error] No value found in the Gateway. Default value in the repository is used.

    Hi All,
    I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
    Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
    Siebel Server log file error :
    GenericLog
    GenericError
    1
    00006c5c52eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c6352eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c6452eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c6552eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c6652eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c7152eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c8052eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c8152eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c9052eb6e6f:0
    2014-01-31 13:06:04
    (sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
    GenericLog
    GenericError
    1
    00006c9152eb6e6f:0
    2014-01-31 13:06:04
    (sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
    GenericLog
    GenericError
    1
    00006c9152eb6e6f:0
    2014-01-31 13:06:04
    (sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
    I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
    ODBC connectivity is also ok  and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
    While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
    Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr  192.168.0.163:2320 ENU Oracle
    Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
    Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
    Message was edited by: Prabhakar2991

    Hi Prameela,
    You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
    =====================================================================================================================================
    [oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
    Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
    Copyright (c) 1994-2012, Oracle. All rights reserved.
    The Programs (which include both the software and documentation) contain
    proprietary information; they are provided under a license agreement containing
    restrictions on use and disclosure and are also protected by copyright, patent,
    and other intellectual and industrial property laws. Reverse engineering,
    disassembly, or decompilation of the Programs, except to the extent required to
    obtain interoperability with other independently created software or as specified
    by law, is prohibited.
    Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
    Oracle Corporation and/or its affiliates. Other names may be trademarks
    of their respective owners.
    If you have received this software in error, please notify Oracle Corporation
    immediately at 1.800.ORACLE1.
    Type "help" for list of commands, "help <topic>" for detailed help
    Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
    srvrmgr> list components
    SV_NAME     CC_ALIAS                   CC_NAME                                              CT_ALIAS         CG_AL                       IAS        CC_RUNMODE   CP_DISP_RUN_STATE  CP_STARTMODE  CP_NUM_RUN_TASKS  CP_MAX_TASKS  CP_ACTV_MTS_PROCS  CP_MAX                       _MTS_PROCS  CP_START_TIME        CP_END_TIME  CC_INCARN_NO  CC_DESC_TEXT
    siebelsrvr  BusIntBatchMgr             Business Integration Batch Manager                   BusSvcMgr        EAI                                    Batch        Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  BusIntMgr                  Business Integration Manager                         BusSvcMgr        EAI                                    Batch        Not Online         Auto          0                 20            0                  1                                        2014-01-29 02:48:30
    siebelsrvr  SCCObjMgr_enu              Call Center Object Manager (ENU)                     AppObjMgr        CallC                       enter      Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  CustomAppObjMgr_enu        Custom Application Object Manager (ENU)              CustomAppObjMgr  EAI                                    Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  DQMgr                      Data Quality Manager                                 Dqmgr            DataQ                       ual        Batch        Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  EAIObjMgr_enu              EAI Object Manager (ENU)                             EAIObjMgr        EAI                                    Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  InfraEAIOutbound           EAI Outbound Server                                  BusSvcMgr        EAI                                    Batch        Not Online         Auto          0                 20            0                  1                                        2014-01-29 02:48:30
    siebelsrvr  EIM                        Enterprise Integration Mgr                           EIM              EAI                                    Batch        Online             Auto          0                 5                                                                         2014-01-29 02:48:30
    siebelsrvr  FSMSrvr                    File System Manager                                  FSMSrvr          Syste                       mAux       Batch        Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:25
    siebelsrvr  GenTrig                    Generate Triggers                                    GenTrig          Workf                       low        Batch        Online             Auto          0                 1                                                                         2014-01-29 02:48:30
    siebelsrvr  JMSReceiver                JMS Receiver                                         EAIJMSRcvr       EAI                                    Batch        Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  MqSeriesAMIRcvr            MQSeries AMI Receiver                                EAIRcvr          EAI                                    Background   Online             Auto          0                 20                                                                        2014-01-29 02:48:30
    siebelsrvr  MqSeriesSrvRcvr            MQSeries Server Receiver                             EAIRcvr          EAI                                    Background   Online             Auto          0                 20                                                                        2014-01-29 02:48:30
    siebelsrvr  MSMQRcvr                   MSMQ Receiver                                        EAIRcvr          EAI                                    Background   Online             Auto          0                 20                                                                        2014-01-29 02:48:30
    siebelsrvr  SMQReceiver                SMQ Receiver                                         EAIRcvr          EAI                                    Background   Online             Auto          0                 20                                                                        2014-01-29 02:48:30
    siebelsrvr  SServiceObjMgr_enu         Self Service Object Manager (ENU)                    AppObjMgr        CallC                       enter      Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  ServerMgr                  Server Manager                                       ServerMgr        Syste                       m          Interactive  Running            Auto          2                 20                                                                        2014-01-29 02:48:20
    siebelsrvr  SRBroker                   Server Request Broker                                ReqBroker        Syste                       m          Interactive  Running            Auto          25                100           1                  1                                        2014-01-29 02:48:20
    siebelsrvr  SRProc                     Server Request Processor                             SRProc           Syste                       mAux       Interactive  Running            Auto          2                 20            1                  1                                        2014-01-29 02:48:25
    siebelsrvr  SvrTblCleanup              Server Tables Cleanup                                BusSvcMgr        Syste                       mAux       Background   Running            Auto          1                 1                                                                         2014-01-29 02:48:25
    siebelsrvr  SvrTaskPersist             Server Task Persistance                              BusSvcMgr        Syste                       mAux       Background   Running            Auto          1                 1                                                                         2014-01-29 02:48:25
    siebelsrvr  AdminNotify                Siebel Administrator Notification Component          AdminNotify      Syste                       mAux       Batch        Online             Auto          0                 10            1                  1                                        2014-01-29 02:48:25
    siebelsrvr  SCBroker                   Siebel Connection Broker                             SCBroker         Syste                       m          Background   Running            Auto          1                 1                                                                         2014-01-29 02:48:20
    siebelsrvr  WorkActn                   Workflow Action Agent                                WorkActn         Workf                       low        Background   Online             Auto          0                 5                                                                         2014-01-29 02:48:30
    siebelsrvr  WorkMon                    Workflow Monitor Agent                               WorkMon          Workf                       low        Background   Online             Auto          0                 5                                                                         2014-01-29 02:48:30
    siebelsrvr  WfProcBatchMgr             Workflow Process Batch Manager                       BusSvcMgr        Workf                       low        Batch        Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  WfProcMgr                  Workflow Process Manager                             BusSvcMgr        Workf                       low        Batch        Not Online         Auto          0                 20            0                  1                                        2014-01-29 02:48:30
    siebelsrvr  WfRecvMgr                  Workflow Recovery Manager                            BusSvcMgr        Workf                       low        Batch        Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eChannelCMEObjMgr_enu      eChannel Power Communications Object Manager (ENU)   AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eCommunicationsObjMgr_enu  eCommunications Object Manager (ENU)                 AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eCommWirelessObjMgr_enu    eCommunications for Wireless Object Manager (ENU)    AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eCustomerCMEObjMgr_enu     eCustomer Power Communications Object Manager (ENU)  AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eEnergyObjMgr_enu          eEnergy Object Manager (ENU)                         AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eMediaObjMgr_enu           eMedia Object Manager (ENU)                          AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eEnergyOGCObjMgr_enu       eOil Gas & Chemicals  Object Manager (ENU)           AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eSalesCMEObjMgr_enu        eSales Power Communications Object Manager (ENU)     AppObjMgr        Commu                       nications  Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    siebelsrvr  eServiceObjMgr_enu         eService Object Manager (ENU)                        AppObjMgr        CallC                       enter      Interactive  Online             Auto          0                 20            1                  1                                        2014-01-29 02:48:30
    37 rows returned.
    srvrmgr>
    =======================================================================================================================================
    Please suggest me what to do.
    Thanks
    Prabhakar

  • "Errors Found During Burning Process"

    Hi,
    Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
    Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
    Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
    I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
    Any ideas?
    For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
    Appreciate any help you can give me.
    Neil

    Colleagues:
    Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
    Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
    Thanks!

  • Userexits or BADIs or BTE's during payment proposal

    Hi,
    I am looking for Userexits or BADIs or BTE's during payment proposal (F110)
    I want to do some checks based on currency and payment method.
    Thanks,
    Krishna.

    Hello,
    You may use the following BADIs. Pls try the highlighted one first.
    FI_BSTM_MC_EXIT
    FI_F110_SCHEDULE_JOB
    FI_PAYMENT_ACCOUNTHOLDER_GTS
    FI_PAYMENT_ADD_INFO_FOR_GTS
    FI_PAYMENT_NOTE_TO_PAYEE_GTS
    Regards,
    Renjith Michael.

  • What is KCV (Key Check Value) in 3DES used for?

    Hi Friends..
    I want to know what is KCV (Key Check Value) used for?..
    i found that 3DES operation (2Keys length or 3Keys length) sometimes needs KCV (Key Check Value)..
    As far as i know the KCV itself computed as Follows :
    3DES(Keys, IV(all zeroes), Data (8byte zeroes)
    Please correct me if i'm wrong..
    Thanks

    Leonardo Carreira wrote:
    sabre150 wrote:
    Leonardo Carreira wrote:
    Could you suggest me what is the good book for "learning the concept of cryptography"?..Errr ... I thought I had done that!Yes you're right, you had suggested the book for me..
    And i don't found the KCV (Key Check Value) usage in the book..
    So, i ask this question, sorry if my question is sounds boring to you, sorry for this inconvenience.. :(
    thanksKCV has at least two different meanings. I suspect you are interested in the one outlined in http://www.cryptographyworld.com/key.htm.

  • FM to check values in select option

    Hi Experts ,
    I want to compare values entered in select option with certain constant values. Is there any FM which will do this?
    Thanks & Regards ,
    Jigar Thakkar

    I believe that there is no such FM. You need to build a range for your constant values and then compare your select option with the range build for constants.
    Eg.
    select-options: s_werks for t001w-werks.
    ranges r_werks for t001-werks.
    r_werks-sign = 'I'.
    r_werks-option = 'EQ'.
    r_werks-low = '2101'.   "Pass the constant value.
    append r_werks.         "Range built for one entry 2101. Similarly append further constant values.
    *Check if select option contains any of the constant values.
    if s_werks in r_werks.
    * Select-options contains value as defined in range
    else.
    * No matching value found.
    endif.

  • No value found for Organizational Unit BILL_ORG

    Hi Experts,
    I am creating a Service transaction - Incident and then creating a follow up document (RFC). Upon saving the follow up document the system shows the following error:
    An error occurred in system FEDCLNT200 during account assignment
    Message no. CRM_ORDER_MISC 060
    Orgfinder: No value found for Organizational Unit BILL_ORG (Notification E CRM_OFI 002)
    I am not using any billing unit and do not even require one - also made settings for billing unit in Master data>Organization Management> Cross-system assignment of Org.Units... but still facing the same error
    Kindly help.
    Regards.

    Hi Amit,
    It has been a long time since I have seen this issue. As far as I remember, and also mentioned in my answer, if distributing the document to another system is not part of your process / requirement, then simply switch off the distribution via status management and transaction control.
    Select the status profile and add transaction control to the status on which the error shows up.
    Hope it helps !
    Haseeb.

  • No values found in FS02 t code

    Hi experts,
    In fs02 t code i have give the company code and in the gl account i try to select the account number but it showing that no values found.
    pls advice.
    Regards
    arun

    hi Arun,
    there could be two reasons behind:
    1. there is no chart of account linked to the company code (you can check this in T001)
    2. there are no G/L accounts created in the chart of account (you can check this in SKA1)
    hope this helps
    ec

  • Idvd5.01 Errors were found during the burning process (Burned Finished)

    I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

    Hello, Oscar,
    This message can mean several things.
    First, are you burning an iMovie or a slideshow or both?
    Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
    Does everything encode properly?
    Are you able to 'save as disk image'?
    Post back with some more details about your project.

  • ADS: Badly formed SStringKey found in StringKey

    Hello,
    I have customizing the application TRM. There I'm using the the formular "ISR_FORM_SPI1". The formular call in the application "Tax Office Cockpit" from the taxagent in the Enterprise Portal. If I'm calling the application in language "en" it works fine. But If I'm calling it in languge "de" the webdynpro dumps with "WebDynpro Exception: Der Aufruf des ADS schlug fehl. Informationen zur Ursache finden Sie im error.pdf auf dem Applikationsserver".
    I found with debugger the error message from ADS:
    Begin operation: Render, elapsed time = 2 ms.#  
    End operation: Render, elapsed time = 1763 ms.#  
    Begin operation: Render Log, elapsed time = 1763 ms.#  
    End operation: Render Log, elapsed time = 1818 ms.#  
    om.aific error information:#   a file-system error has occurred (^0)#  
    INTERNAL ERROR! Badly formed SStringKey found in StringKey::GetKey().#   ;
    [Error Log file "2008.09.19.103624SAFPMSTURM.pdf" written  to /usr/sap/HAL/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles]#
    In the 2008.09.19.103624SAFPMSTURM.pdf written:
    Severity Message Id Date/Time Description
    Warning 29203 19/09/08 10:36 AM Invalid node type: tags
    Warning 29323 19/09/08 10:36 AM The fault occurred on line 2.
    (and so on same message 9x)
    An expressionless information...?
    If I use an own formular (e.g. ZFORM) the error is:
      Processing exception during a "UsageRights" operation.#
      Request start time: Thu Sep 18 18:33:18 CEST 2008#
      com.adobe.ads.exception.FailedCreationException: ##
      Specific error information:#a file-system error has occurred (^0)#
      INTERNAL ERROR! Badly formed SStringKey found in StringKey::GetKey().###
      Exception Stack Trace:#
      com.adobe.ads.exception.FailedCreationException: ##
      Specific error information:#
      a file-system error has occurred (^0)#
    Who know an answer of the two problems?
    Reguards
    Maik

    Workaround
    This may not work for all, but this is something that seem to work for us.
    Instead of loading the pdf directly from the server like we normally do (using Response.Redirect or Server.Transfer etc).
    Let the html page load and in the onload of the html page, call a javascript to set the window.location to the server path of the pdf and then when the pdf downloads and displays, it seem to work fine for us on all versions.
    This is the general idea and the way I did in .Net was to use ClientScript.RegisterStartupScript and set the window.location as the pdf path instead of where the pdf was getting loaded from the server.
    Hope this helps someone.

  • Config to select Checking Rule "A" during Sales order availability check

    Hi All,
    Please can you tell me the config that tells system to select the checking rule "A" during sales order availability check. The problem at my client side is that the system was using the checking rule "A" initially but suddenly it has started using checking rule "B" (delivery) for sales order. The item category being used in YAN and Scheduline Line category is YC (ATP and Allocation allowed).
    The checking group is getting picked up correctly from the Material Master value.
    I have tried to find all the possible config that might be causing this issue, but I am unable to find one. Based on my understanding of the SAP SD process, there is no place where we can define in system to use the "checking rule" for SD availability check. This is the default (hard-coded) in the system.
    Please can you help me to find how the checking rule "B" might be getting called instead of "A".
    Regards,
    Swapnil

    Hi
    Checking rule is transaction based like A for SD sales order and B for SD delivery like that it is defined
    So in a sales order the system checks with the combination of AChecking rule and the Checking group defined in MMR and for that combination we give controls in OVZ9 and based on that system makes availability check
    Every one  and all SAP materials including myself say Checking Rule is transaction based and picked up by the system thro hard coded controls
    But In t code OPJL it is possible to define new checking rules that means customization is possible
    But where is the link or assignment
    For this nobody has given correct answers including the PP friends
    For you the system is shifting the Checking Rule from A to B in the sales order itself means we can find out get where the said assignment is done
    In OVZ9 remove the combination Checking rule B and your Checking group and save
    You said the system has shifted its  Checking rule to B from A
    Now test it after removing this control in OVZ9 and see the system is shifting once again to A or throwing error as the control is removed in OVZ9
    make sure that you do this in a sales order and post back
    Regards
    Raja

  • MCSI Report is showing msg "No value found"

    Hi all,
    when I am running MCSI Report, This Report is showing "No Values found".
    What is the problem? and How can we populate data for this report?
    Kindly guide with detailed steps.
    Parallely report MCKH is populating with prpoer value.
    Your early help is appreciated.
    Thanks in advance
    Raju

    Hi
    First check whether you have maintained any update grp for the self defined info structure which you have defined. If not maintain it MC24-Tcode
    Than check whether you have activated the self defined info structure through tcode OMO1. If not activate it.
    Check the sales area and statistics indicator assignment with Statistics Update group item in OVRP-T-code (Assign Update Group at Item Level).
    Check the sales area and statistics indicator assignment with statistics group header in OVRO - T-code
    (Assign Update Group at Header Level)
    For more info you can check
    Re: T-code - 'MCTG' 'New Division'
    Regards
    Mani

Maybe you are looking for