No value found for Organizational Unit BILL_ORG
Hi Experts,
I am creating a Service transaction - Incident and then creating a follow up document (RFC). Upon saving the follow up document the system shows the following error:
An error occurred in system FEDCLNT200 during account assignment
Message no. CRM_ORDER_MISC 060
Orgfinder: No value found for Organizational Unit BILL_ORG (Notification E CRM_OFI 002)
I am not using any billing unit and do not even require one - also made settings for billing unit in Master data>Organization Management> Cross-system assignment of Org.Units... but still facing the same error
Kindly help.
Regards.
Hi Amit,
It has been a long time since I have seen this issue. As far as I remember, and also mentioned in my answer, if distributing the document to another system is not part of your process / requirement, then simply switch off the distribution via status management and transaction control.
Select the status profile and add transaction control to the status on which the error shows up.
Hope it helps !
Haseeb.
Similar Messages
-
No value found for text variable ZZCALQTR in "&ZZCALQTR&"
Hi,
I m currently working on cell definition and facing some problems.
Considerthis
Structure1
Current Cal Quarter Last Cal Quarter
Row1
Row2
Total
For Current Cal Quarter and Last Cal Quarter i have text variable &ZZCALQTR& and inside i have restricted 0CALQUARTER.
ANd i have used
different offset for )CalQuarter in individual cell definition.
So, it is giving me this error
No value found for text variable ZZCALQTR in "&ZZCALQTR&".
what should i do...any solution
regards,
Sandeep KhatriHi San,
i think u r exeuting the Query without providing any value in selection screen.then it displays the error message which u mentioned...just enter some value in selectionand try it..
hope this helps
regards -
No value found for Text Variable
Hi All,
I have 2 different variable created on 0VERSION. One for user entry and second one is text variable with replacement path as "text".
I have 3 different columns in the report.
One is Restricted KF, based on user entry variable. Heading of this column has to be Result (&ZVERTXT&), where ZVERTXT is my text varaible.
Now, in second column I m using formula to calculate percentage. Heading of this column is &ZVERTXT& (%).
Now, in third column i m again using formula using the same KF as in first column. But this time, in the heading this text variable thorws "no value found error"
can anybody help me out in this issue.. ??Hi,
This is the proble to get value for text variables with Replacement path ,in case system is getting 2 reference values .So it get confusion and says that <i>No value found for Text Variable </i> .
So as a work around :
Instead of a text variable with automatic substitution(replace ment path) from another characteristic value, you can also create a text variable that is filled by a customer exit.In the code you assign the Text value by looking into TEXT table with the value you got from User entry variable( which is used in first Restricted KF).
With rgds,
Anil Kumar Sharma .P -
Tables for organizational unit
Hello!
I created an organizational unit including position and user id's.
In which tables this information is avaliable?
regards
yifatHi,
If you want to see the Organizational unit assigned to an employee, check PA0001 for that PERNR(Employee ID) and pick the ORGEH (Organizational Unit) and PLANS(Position).
If you just want to see the existence of org unit and position goto HRP1000 table and pick OTYPE = 'O' for organizational Unit and OTYPE = 'S' for positions.
If you want to see the relationship between them then goto table HRP1001. OTYPE = 'O' for org unit, OTYPE = 'S' for position and Check their relationship with OTYPE = 'P' for Person.
Regards,
Amit
Reward all helpful replies. -
0UNIT - No SID value found for value 'FYR' of characteristic 0UNIT
Dear All,
Request your help for the following issue observed.
Please find below the details of the issue observed:
Scenario: A flat file upload in and ODS with field Alternate Unit of Measure (mapped to 0UNIT)
Issue: While activating the data in the ODS (Transformation, RSDS transaction datasource), it gives an error stating 'No SID found for value 'FOZ' of characteristic 0UNIT'.
Measures tried: Transferring Global Settings, Checking in the table 'T006', Checking the format of the flat file.
May I please request your help for the above issue at the earliest.
Thank you.
Regards,
Kunal GandhiHello,
Same issue here.
I've checked the entries in 0UNIT SID table: The unit "xxx" is not present.
But this unit is present in T006 table, with no specific option.
The update mode for Master Data on SPRO is : "Create master data if Not avalaible (Auto_sid)"
The update mode in infopackage is "Always update data, even if no master data exist for the data"
I've used the "Rebuild tables" mode for Units of measurement for my source system.
The tried the simulate update for my datapackage.
==> No errors
==>deletion of package on the data target
==>manuel update of data from the package
==>change to green
==>check the 0UNIT SID table : The unit "xxx" is now present !
Hope this helps -
Hierarchical + Analytical query for organizational unit parameters
Hello gurus,
I try for a couples of hour ago to make a query work as I would like.
Our application need to store some parameters for our organization units. These organization units are typically organized in in an hierarchy manner: one top unit with many level of child units. The parameters are stored into another table with 1:1 relationship.
For sake of visualisation, here is the data for the organization unit and parameter table in a more visual format:
SQL> select * from organization_unit;
UNIT_CODE UNIT_NAME PARENT_UNIT_CODE
00000 Top level
10 L2 unit #10 00000
10-01 L3 unit #10-01 10
10-02 L3 unit #10-02 10
20 L2 unit #20 00000
20-01 L3 unit #20-01 20
20-02 L3 unit #20-02 20
SQL> select * from org_unit_parameters;
UNIT_CODE PARAM1 PARAM2 PARAM3 PARAM4
00000 Default value Default value Default value {null}
10 {null} Value from 10 Value from 10 {null}
10-01 {null} {null} Value from 10-01 {null}
10-02 {null} {null} {null} Value from 10-02
20 Value from 20 Value from 20 Value from 20 {null}
20-01 {null} Value from 20-01 {null} {null}
20-02 {null} Value from 20-02 {null} {null}The application will query the parameter table to get a parameter value for a given unit.
The parameter resolution algorithm is rather simple: when querying a unit, the applicable parameter is the one defined at the requested level. If the parameter is not defined (null) at the requested level, the parameter value that must be returned is the next defined one in the parent hierarchy. In some rare cases, it can be null if a parameter is not defined anywhere from the requested level to top.
I've made a query that seems to work when querying for one unit at a time. It use hierarchical operators (start with + connect by) with a bit of analytical functions. Here is a test & raw output example:
SQL> WITH hierarchy
2 AS
3 (
4 SELECT ou.unit_code,
5 LEVEL AS lvl
6 FROM organization_unit ou
7 START WITH
8 ou.unit_code = '20-01'
9 CONNECT BY
10 ou.unit_code = PRIOR ou.parent_unit_code
11 )
12 SELECT h.*,
13 p.param1 AS param1_raw,
14 LAST_VALUE (p.param1 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param1_with_last,
15 FIRST_VALUE(p.param1 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param1_with_first,
16 p.param2 AS param2_raw,
17 LAST_VALUE (p.param2 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param2_with_last,
18 FIRST_VALUE(p.param2 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param2_with_first,
19 p.param3 AS param3_raw,
20 LAST_VALUE (p.param3 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param3_with_last,
21 FIRST_VALUE(p.param3 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param3_with_first,
22 p.param4 AS param4_raw,
23 LAST_VALUE (p.param4 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param4_with_last,
24 FIRST_VALUE(p.param4 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param4_with_first
25 FROM hierarchy h
26 LEFT JOIN org_unit_parameters p
27 ON h.unit_code = p.unit_code
28 ORDER BY h.lvl DESC;
UNIT_CODE LVL PARAM1_RAW PARAM1_WITH_LAST PARAM1_WITH_FIRST PARAM2_RAW PARAM2_WITH_LAST PARAM2_WITH_FIRST PARAM3_RAW PARAM3_WITH_LAST PARAM3_WITH_FIRST PARAM4_RAW PARAM4_WITH_LAST PARAM4_WITH_FIRST
00000 3 Default value Default value Value from 20 Default value Default value Value from 20-01 Default value Default value Value from 20 {null} {null} {null}
20 2 Value from 20 Value from 20 Value from 20 Value from 20 Value from 20 Value from 20-01 Value from 20 Value from 20 Value from 20 {null} {null} {null}
20-01 1 {null} Value from 20 {null} Value from 20-01 Value from 20-01 Value from 20-01 {null} Value from 20 {null} {null} {null} {null}Seems pretty good, the upper parameters are well «propagated» down with LAST_VALUE function. But, I don't understand why the use of FIRST_VALUE and oppposite ordering doesn't give the same result. A little more playing with the last query for getting the final result for a given unit code:
SQL> SELECT *
2 FROM
3 (
4 WITH hierarchy
5 AS
6 (
7 SELECT ou.unit_code,
8 LEVEL AS lvl
9 FROM organization_unit ou
10 START WITH
11 ou.unit_code = '20-01'
12 CONNECT BY
13 ou.unit_code = PRIOR ou.parent_unit_code
14 )
15 SELECT h.*,
16 LAST_VALUE (p.param1 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param1,
17 LAST_VALUE (p.param2 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param2,
18 LAST_VALUE (p.param3 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param3,
19 LAST_VALUE (p.param4 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param4
20 FROM hierarchy h
21 LEFT JOIN org_unit_parameters p
22 ON h.unit_code = p.unit_code
23 ORDER BY h.lvl
24 )
25 WHERE ROWNUM = 1;
UNIT_CODE LVL PARAM1 PARAM2 PARAM3 PARAM4
20-01 1 Value from 20 Value from 20-01 Value from 20 {null}Works well!
But, my ultimate goal is to create a view that resolve correctly all these parameters for each level of the organization with proper propagation rather then querying for each unit at a time. I played a bit, but without success. :( My current raw query is this one:
SQL> WITH hierarchy
2 AS
3 (
4 SELECT ou.unit_code,
5 LPAD(' ',2*(LEVEL-1)) || ou.unit_code AS tree,
6 LEVEL AS lvl
7 FROM organization_unit ou
8 START WITH
9 parent_unit_code IS NULL
10 CONNECT BY
11 PRIOR unit_code = parent_unit_code
12 )
13 SELECT h.*,
14 p.param1 AS param1_raw,
15 LAST_VALUE (p.param1 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param1_with_last,
16 FIRST_VALUE(p.param1 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param1_with_first,
17 p.param2 AS param2_raw,
18 LAST_VALUE (p.param2 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param2_with_last,
19 FIRST_VALUE(p.param2 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param2_with_first,
20 p.param3 AS param3_raw,
21 LAST_VALUE (p.param3 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param3_with_last,
22 FIRST_VALUE(p.param3 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param3_with_first,
23 p.param4 AS param4_raw,
24 LAST_VALUE (p.param4 IGNORE NULLS) OVER (ORDER BY h.lvl DESC) AS param4_with_last,
25 FIRST_VALUE(p.param4 IGNORE NULLS) OVER (ORDER BY h.lvl ASC) AS param4_with_first
26 FROM hierarchy h
27 LEFT JOIN org_unit_parameters p
28 ON h.unit_code = p.unit_code
29 ORDER BY h.unit_code;
UNIT_CODE TREE LVL PARAM1_RAW PARAM1_WITH_LAST PARAM1_WITH_FIRST PARAM2_RAW PARAM2_WITH_LAST PARAM2_WITH_FIRST PARAM3_RAW PARAM3_WITH_LAST PARAM3_WITH_FIRST PARAM4_RAW PARAM4_WITH_LAST PARAM4_WITH_FIRST
00000 00000 1 Default value Default value Default value Default value Default value Default value Default value Default value Default value {null} Value from 10-02 {null}
10 10 2 {null} Value from 20 Default value Value from 10 Value from 10 Default value Value from 10 Value from 10 Default value {null} Value from 10-02 {null}
10-01 10-01 3 {null} {null} Default value {null} Value from 20-02 Default value Value from 10-01 Value from 10-01 Default value {null} Value from 10-02 Value from 10-02
10-02 10-02 3 {null} {null} Default value {null} Value from 20-02 Default value {null} Value from 10-01 Default value Value from 10-02 Value from 10-02 Value from 10-02
20 20 2 Value from 20 Value from 20 Default value Value from 20 Value from 10 Default value Value from 20 Value from 10 Default value {null} Value from 10-02 {null}
20-01 20-01 3 {null} {null} Default value Value from 20-01 Value from 20-02 Default value {null} Value from 10-01 Default value {null} Value from 10-02 Value from 10-02
20-02 20-02 3 {null} {null} Default value Value from 20-02 Value from 20-02 Default value {null} Value from 10-01 Default value {null} Value from 10-02 Value from 10-02As you can see, it's not as I expected. I know there's something to do with a PARTITION BY clause, but don't know how.
Is anyone knows how to solve my problem?
Thanks
Bruno
For reproductibility purposes, here is the code to create sturcture and data:
Here is the format of my tables and some samble data:
CREATE TABLE organization_unit (
unit_code VARCHAR2(5 CHAR) NOT NULL PRIMARY KEY,
unit_name VARCHAR2(100 CHAR) NOT NULL,
parent_unit_code VARCHAR2(5 CHAR)
CREATE TABLE org_unit_parameters (
unit_code VARCHAR2(5 CHAR) NOT NULL PRIMARY KEY,
param1 VARCHAR2(100 CHAR),
param2 VARCHAR2(100 CHAR),
param3 VARCHAR2(100 CHAR),
param4 VARCHAR2(100 CHAR)
-- Inserting data
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('00000', 'Top level', NULL);
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('10', 'L2 unit #10', '00000');
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('10-01', 'L3 unit #10-01', '10');
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('10-02', 'L3 unit #10-02', '10');
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('20', 'L2 unit #20', '00000');
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('20-01', 'L3 unit #20-01', '20');
INSERT INTO organization_unit (unit_code, unit_name, parent_unit_code)
VALUES ('20-02', 'L3 unit #20-02', '20');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param1, param2, param3)
VALUES ('00000', 'Default value', 'Default value', 'Default value');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param2, param3)
VALUES ('10', 'Value from 10', 'Value from 10');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param3)
VALUES ('10-01', 'Value from 10-01');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param4)
VALUES ('10-02', 'Value from 10-02');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param1, param2, param3)
VALUES ('20', 'Value from 20', 'Value from 20', 'Value from 20');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param2)
VALUES ('20-01', 'Value from 20-01');
INSERT INTO ORG_UNIT_PARAMETERS (unit_code, param2)
VALUES ('20-02', 'Value from 20-02');
COMMIT;Now, I hoppe I got your reqs:
WITH hierarchy AS (
SELECT ou.unit_code,
LPAD(' ',2*(LEVEL-1)) || ou.unit_code AS tree,
LEVEL AS lvl,
param1 AS param1_raw,
param2 AS param2_raw,
param3 AS param3_raw,
param4 AS param4_raw,
SYS_CONNECT_BY_PATH(p.param1,'#') || '#' AS param1_path,
SYS_CONNECT_BY_PATH(p.param2,'#') || '#' AS param2_path,
SYS_CONNECT_BY_PATH(p.param3,'#') || '#' AS param3_path,
SYS_CONNECT_BY_PATH(p.param4,'#') || '#' AS param4_path
FROM organization_unit ou LEFT JOIN org_unit_parameters p
ON ou.unit_code = p.unit_code
START WITH parent_unit_code IS NULL
CONNECT BY PRIOR ou.unit_code = parent_unit_code
SELECT unit_code,
tree,
lvl,
param1_raw,
REGEXP_SUBSTR(param1_path,'[^#]+',1,GREATEST(1,REGEXP_COUNT(param1_path,'[^#]+'))) AS param1_with_last,
REGEXP_SUBSTR(param1_path,'[^#]+') AS param1_with_first,
param2_raw,
REGEXP_SUBSTR(param2_path,'[^#]+',1,GREATEST(1,REGEXP_COUNT(param2_path,'[^#]+'))) AS param2_with_last,
REGEXP_SUBSTR(param2_path,'[^#]+') AS param2_with_first,
param3_raw,
REGEXP_SUBSTR(param3_path,'[^#]+',1,GREATEST(1,REGEXP_COUNT(param3_path,'[^#]+'))) AS param3_with_last,
REGEXP_SUBSTR(param3_path,'[^#]+') AS param3_with_first,
param4_raw,
REGEXP_SUBSTR(param4_path,'[^#]+',1,GREATEST(1,REGEXP_COUNT(param4_path,'[^#]+'))) AS param4_with_last,
REGEXP_SUBSTR(param4_path,'[^#]+') AS param4_with_first
FROM hierarchy
ORDER BY unit_code
UNIT_ TREE LVL PARAM1_RAW PARAM1_WITH_LAST PARAM1_WITH_FIRS PARAM2_RAW PARAM2_WITH_LAST PARAM2_WITH_FIRS PARAM3_RAW PARAM3_WITH_LAST PARAM3_WITH_FIRS PARAM4_RAW PARAM4_WITH_LAST PARAM4_WITH_FIRS
00000 00000 1 Default value Default value Default value Default value Default value Default value Default value Default value Default value
10 10 2 Default value Default value Value from 10 Value from 10 Default value Value from 10 Value from 10 Default value
10-01 10-01 3 Default value Default value Value from 10 Default value Value from 10-01 Value from 10-01 Default value
10-02 10-02 3 Default value Default value Value from 10 Default value Value from 10 Default value Value from 10-02 Value from 10-02 Value from 10-02
20 20 2 Value from 20 Value from 20 Default value Value from 20 Value from 20 Default value Value from 20 Value from 20 Default value
20-01 20-01 3 Value from 20 Default value Value from 20-01 Value from 20-01 Default value Value from 20 Default value
20-02 20-02 3 Value from 20 Default value Value from 20-02 Value from 20-02 Default value Value from 20 Default value
7 rows selected.
SQL> SY.
Edited by: Solomon Yakobson on Nov 12, 2010 10:09 AM -
HRP5500(Compnay not found for orgnization unit)
Hi,
While chekcing PO printprivew it is giving error as "Global data missing for the PO".When I debugged the process I found that process was not able to find company for orgnization unit.In other way for one of the object(ornization unit) it was excepting record in table HRP5500 with sub type '0100'(Company), but entry present for sub type '0300'(Purchasing group).
Could you please what custmization change is require and where it is present in IMG?
Thanks in advance,
Amit R.Hi,
Your PPOMA configuration is wrong.
Please check the thread i have opened :
Purchasing organization and PO output
Kind regards,
Yann -
Search Help for Organization Unit ID..
Hello Friends,
Is there any search help which will display all the Organization Unit ID?..
John.Hello Friends,
When you goto Users_gen->create->copy user and employee... - > create users from existing SU01 users.. you can see the Organization unit id input field.. which has F4 help.. I need to have same F4 help in my custom program.. when i try to find the search help in debug mode i found that 'HRBAS00OBJID' but when i execute this search help in se11.. i dont find the same value which appear in the Users_gen. when i execute in se11 i can see more than 5000 records... appear but when execute users_gen i can see only 20 records.. i want to know is there any other search help will only display the Organiztion unit id only..
John. -
LSO course authorization for Organizational Unit
Hi,
Is is possible to restrict courses in a course catalog according to Organizational unit. In the system we can restrict users to specific courses through structural authorization, but is it possible to maintain authorizations on Organizational units for LSO Courses or course types.
Regards,
AsadDisappering is the right behavior. On delivery method WBT participant type 'O' cannot be booked because WBT can be only accessed using Learning portal and Learning portal cannot be logged in using Org. Unit. So this is not possible for this release.
But i have heard in EHP4 this option of Org. unit booking on WBT is possible but not directly but system will take care if you select an org unit for booking.
Regards, kavya
Edited by: Kavya Shree on Oct 30, 2008 10:08 AM -
Account for organizational unit - translation of BP names possible?
Hello,
we created accounts for BP-Role BUP004 - organizational unit.
We need to have different translations of the name of this BP depending on the login language.
e.g.:
german BP-name = Einsatzplanung Lagern
english BP-name = WFM stroage systems
Is there a way to maintain different names per language?
Kind regards
ManfredHi Manfred,
You can maintain multiple language version of the bp name & address using International address version.
For more info, [http://help.sap.com/saphelp_sm40/helpdata/en/18/c042ffda4811d3b571006094192fe3/content.htm]
Cheers, Satish -
NO SID value found for 'PR' in 0UNIT
Hi,
When I run a query on a remote multiprovider , though the SID value exists in the SID table, I get this error message.
I tired all the options of running the SID conversion for 0UNIT in RSRV. Its fine, no errors.
Also ran the consistency check for dimensions of the cube.
I ran thru LISTCUBE for the same selections i made in the query.
Basically the query has a selection on the key figure which has unit as 0BASE_UOM which has restriction on a date field which is a NUMC datatype with 8 characters.
If I remove the date field the query runs fine but no value is retrived and is blank for key figure.
I see data existing for the selections I have made in the query.
Any idea why it happens only when there is a restriction on the date field. Though date is populated and the key figure too.
ThanksCan you try updating Unit tables ?
BI - RSA1 - Source System - RClick on Source System -
Transfer Global Settings - Select Units of Measurement -
Update Tables - Execute. -
No value found for text variable ZTFYEAR
Hi,
I have used Text variable ZTFYEAR with replacement path on fiscal year 0FISCYEAR. I have three columns in my report for value for current fiscal year, fiscal year-2, fiscal year-1.When I use the text variable with replacement path , it shows in the header &ZTFYEAR&Value instead of showing 2007value, 2005 Value , 2006 Value.
Any bosy can help?
Error message :
Message no. BRAIN612
Diagnosis
Text variable ZTFYEAR, which is found in the item " Values", needs to be replaced by the value of the characteristic 0FISCYEAR. This value is not clearly specified in the item " Values". Therefore, no replacement takes place.
Thanks,
AjayHi Ajay,
Is this teaxt variables created on 0FISCYEAR?
if yes
then did you include 0FISCYEAR in your selection while creating a row or a column as the part of the structure?
If you are using 0FISCYEAR and then still not getting the value replaced check in your amster data if you ahve the key,small text, middle text and long text which ever you have used while creating your text variable has values in it or if it's blank?
hope this helps!!
Regards
Sri -
Standard Report for Organizational Unit
Hello Team,
Is there any standard report to fetch orgunit and their parent org unit ID in Organizational Management? Can we do it through Adhoc query??
Please suggest suitable solution.
Best Regards,
RPDear Rajas P,
SAP has given no.of option's like you can fetch the data through
S_AHR_61016362 - Flexible Employee Data
SAP Query : -> SQ03, SQ02, SQ01 or SQVI
Postimage.org / gallery - SQ 01 1, SQ 01 2, SQ 01 3, SQ 01 4, SQ 01 5, SQ 01 6, SQ 01 7
SE16
Try with these If still not getting expected result I think so you need to go with custom report..
Ur's
Mohan -
No values found for text with replcement path
Hi Guys,
I made a query header to replace with the fiscal year/period dynamically. Query has restricted
key figures for current month and previous month.
When I execute this it is showing the current and previous month details but it is not showing the
fiscal year/period in query(description) header. It is showing the same technical name like
&ZFISPER&.
I have seen other postings in sdn and restricted the compunded characterstics in query.
If I restrict the fiscal year period in filter it is reflecting in query header but I'm not getting the previous
month values. Previous month values are showing blank. It is replacing in restricted key figure header
but not working in query description.
Can any one through me some light here?
Thanks
PrasadHello,
You cannot place in filter as it will restrict to current month only and hence ur previous month will be blank obviously.
In 7.O, it is possible to use. replacement path from infoobject or from variable as well!
variable (current month text variable)may suit in your case.
or
You can try some formatting options in teh workbook to achieve this
or
You can try to convince client that u will display the current month and previous month in their respective colums instead of Query Description.
Reg,
Dhanya -
Authorisation Object for Organizational Unit.
Hi Experts
I have an query on user authorisation as follow,
As in my project I have two user as Maker & Checker. Maker is having Business Area B001 Authorisation and in checker is also having the different role with same Business area authorisation, Now my query is I wanted to sort this on Organisational Unit level. So is there any object available for to assign Org Unit level Authorasation. as like P_Origin is there in SAP sytem.. please guide me ...
Regards
SwapnilHi Swapnil,
You can use HR Master Data Customer-Specific object to include any fields from infotype 0001 to authorisation checks. Please check the |help.sap.com (http://help.sap.com/erp2005_ehp_02/helpdata/en/4e/74ba3bd14a6a6ae10000000a114084/frameset.htm) regarding use of this object. On the bottom of that page is a link for creating the object and activating the check against it.
Regards,
Saku
Maybe you are looking for
-
Pinch open and close zoom (mac) not working in latest beta update
Anybody know why pinch open close for the mac track pad suddenly does not zoom in the lastest beta update?
-
Creating a report in Web dynpro using OOPS concept
Hi all, Iam new to web Dynpro, i need to create a report in Web Dynpro using oops concept. can any one guide me regarding it. Regads, Easter
-
Boot Camp: Is it possible to expand the size of the partition after install
I loaded Boot Camp several years ago and did not allow enough hard drive space for the Windows side. Is it possible to expand the partition without erasing everything and starting from scratch?
-
Ringer Sound doesn't work for phone calls.
I can't get my iPhone 4S sound to work for receiving phone calls. Sound selected along with vibrate for phone calls. Miss calls everytime. Volume turned up and turned on.
-
Country Strategy for Subsidairies installation
I'm trying to create a new Account Plan for Belgium using the SAP documentation called Country Strategy for Subsidairies . I have problem to create my first solution on the StudioI'm currently on step 1: (Define and Implement a new Country and As