MCSI Report is showing msg "No value found"

Hi all,
when I am running MCSI Report, This Report is showing "No Values found".
What is the problem? and How can we populate data for this report?
Kindly guide with detailed steps.
Parallely report MCKH is populating with prpoer value.
Your early help is appreciated.
Thanks in advance
Raju

Hi
First check whether you have maintained any update grp for the self defined info structure which you have defined. If not maintain it MC24-Tcode
Than check whether you have activated the self defined info structure through tcode OMO1. If not activate it.
Check the sales area and statistics indicator assignment with Statistics Update group item in OVRP-T-code (Assign Update Group at Item Level).
Check the sales area and statistics indicator assignment with statistics group header in OVRO - T-code
(Assign Update Group at Header Level)
For more info you can check
Re: T-code - 'MCTG' 'New Division'
Regards
Mani

Similar Messages

CJI5 commitment line item report not showing po gross value

Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
Sandeep

Hi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul

Standard T-code of Fix Asset report which shows Quanity and Value

Hi friends,
Is it any T-code in SAP which shows Fix Asset with quality and value.
regards
Hemant Maurya

Hi,
All standard SAP asset reports show values for Eg.S_ALR_87011990. To display quantity you may create a sort variant with quantity as one of the fields through S_ALR_87009120. You can then run the above report i.e. S_ALR_87011990 with this sort variant to display quantities also along with values.
regards,
Swati

HTMLDB updateable report not showing the updated values after pagination

Create updateable multiple record report usingselect wwv_flow_item.display_and_save(1,xxxx) a,wwv_flow_item.display_and_save(2,yyyy) b,
htmldb_item.select_list(3,STATUS,'Not Applicable;
Not Applicable,Pending;Pending,Closed;Closed') Status,
htmldb_item.text(4,REASON) REASON,
wwv_flow_item.date_popup(5,null,TARGET_DATE) TARGET_DATE
FROM table_name using sql_report wizard.
Report executed properly. User can also update the status,reason and target date columns. But if the report contains more than 1 page, updated values in the previous page cannot be seen(old values are displayed).
Kinldy let me know is there any way to store the updated value and show the user again.
Thanks in advance.

Thanks marc for your feedback. Ofcourse what you said is right. But is there any way i can see the changed values before submitting .
For example, out of the 10 records in the 1st page if the user changes, column value for 9 records and goes to the next page and changes 10 records in the 2nd page and comes back to the 1st page to change the records which he has changed already, he cannot see the changed value for all the 9 records which he has changed.
Is there any way i can make the user see the changed value
before submitting after navigating to the other page of the report and comes back?
thanks in advance.

How let Empty (NULL) cells in Matrix Report to show a 0 value

I am working on a Matrix report in Oracle 9i environment. The report involves lots of grouping and calculations. Everything works fine, except for the Empty (NULL) cells. If a group did not get a concrete
Returned value (NULL), the cell would be empty. The data layout is as following:
District_Name
Total Failed %Failed
10 5 %50
For some District, all 3 cells are empty, (with NULL values returned, I guess). As a result, all 3 cell for that District show nothing. End users required all cells with a meaningful value (e.g. 0). At same time they want all the value in a grid style (outlined). With null values, all 3 cell merged into one empty "big" cell".
Any friends can help?
I would like to express my appreciation here.
AChen

Without seeing your query, sounds like you either need:
a) an outer join
b) an NVL function
If you are pulling data from multiple tables, and you are doing direct joins, and data from one table is not present in another, an outer join would get the other data.
You should also use NVL if you need a 0. If a field is not populated, but you want to default it to zero, use the NVL function.
If all else fails, you could make the fields formula fields. In the formula you could put this pseudocode:
IF :cf_cell1 is null
then return 0;
else return :cf_cell1;
end if;Just an idea - if none of those suffice, post your query and maybe we can help.
Good luck!

Items with zero stock quantity show negative stock value in Stock reports

When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value (negative value in my case)
How can this happen, and how can I correct this situation ?
System parameters are : negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
P.K.Johnsen

Hi Johnsen,
I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
Thanks,
Joseph

Report Result showing # and limited vlaues instead of complete values

Hello,
I have a strange problem. I am working in BW 2.0B and loading data into 2 cubes (IS and PLAN). Over these cubes, I have a Multicube and my report is built on this multicube. The columns in the Report result show me strange values. For example the field Disposition shows # whereas after checking the cube contents there are more than 100 numeric values. Another field Material number shows few values (hardly 4 records) whereas after checking cube contents, there are lot more values present. What could this be due to? Pls help.
Thanks & <removed by moderator>,
SD
Edited by: Siegfried Szameitat on Jan 12, 2009 2:09 PM

hi siggi,
no. i have not used any restriction at all. I created a test report and placed only disposition in it. but it shows me just 1 record in the result.
do i need to make some changes on the multicube?

MCSI report for actual/normal sales and scrap scales

Hi all,
How do i can configure sales value and net value of the Scrap sales should be Zero in MCSI report(SIS)? because its not a actual/normal sales so it should not appear in the MCSI report or it should show Zero values and For Actual/normal sales MCSI report should show exact values as per the transation captured by the system.
Please explain me in terms of Tables and fields and Configuration settings need to be changed in Pricing Procedure.
Thanks and Regards
Swamy HP

I resolved it. Thanks for your valuable inputs.

S_ALR_87013543 report not showing line item correctly

Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
Shiv

Hi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv

Report to show hours booked against a project

Hi all,
Does anyone know if there is there a report that will show the number of hours booked for labour against a project and that also shows a breakdown of the labour costs?
Many thanks.

CJI3 - Line Item report can show you those values provided you include the fields Quantity, Personnel Number etc., in the layout.
Regards
Sreenivas

No values found in FS02 t code

Hi experts,
In fs02 t code i have give the company code and in the gl account i try to select the account number but it showing that no values found.
pls advice.
Regards
arun

hi Arun,
there could be two reasons behind:
1. there is no chart of account linked to the company code (you can check this in T001)
2. there are no G/L accounts created in the chart of account (you can check this in SKA1)
hope this helps
ec

Show Previous Balance value in Report.

Hi,
I'm using Crystal Reports with Visual Studio 2010. I'm generating a report which shows columns Debit and Credit and SUM values on the buttom of each column. The report is filtered using a date range, which I specify in my connection via C# code (below).
string sqlString = "";
sqlString = "SELECT * FROM Ledger WHERE ([Payment Date] >= #" + FromDate + "#) AND ([Payment Date] <= #" + ToDate + "#)";
Now I need a "Previous Balance" value, which would be the SUM of Credit and Debit columns, which are prior to "Payment Date". How do I accomplish this? I've attached a sample of the report I'm looking for. Please be specific with your reply, because I'm new to Crystal Reports.
Thank you so much for your help.
Aron

Hi Aron,
Crystal is database agnostic, meaning it will run a report against any database. If you create a report using AS/400 it's possible to use that same report against an Oracle or SQL Server database as long as the recordset Crystal is expecting is the same.
So having a report run from a Stored Procedure will work on different databases as long as the metadata for the Stored Procedures between the databases match.
For the subreport, when you drop the subreport into the Group Footer. Right-click on the subreport and you have the option to Link Subreport. You can select the OwnerID from the main report and link it to the OwnerID in the subreport.
Your c# suggestion may be going the long way around the barn. If you link the subreport in your Group Footer 1, you should be able to get the Previous Balance for that OwnerID. When you link the subreport, it creates a Record Selection Formula in the subreport that should return only the records for that OwnerID.
Once you have the subreport linked, edit the subreport and go to Report | Selection Formula | Edit Record Selection Formula. You'll see what the linking created. You can now edit that formula to include your date range that is outside the current period.
Hope this helps,
Brian

Any standard report to show WBS,settlement, asset no and asset cost/value

Hi All,
Please advice . Is there any standard report to show WBS,settlement, asset no and asset cost/value ? I tried tcode kosrlist_pr but it does not show asset cost/value.. it shows only WBS,settlement and asset no.
Thank you.
Best Regards,
Nies

Dear,
der is no such standard report to show WBS,settlement, asset no and asset cost/value as perv my knowlwdge. so do one thing select one standard report which is more similar to standard report to show WBS,settlement, asset no and asset cost/value but some of like asset no or asset cost or some other values not reflecting in that std report. den u take the Table name and field name of that particular fields which u wann reflect in the report. use the logic of STD TC of SAp which more similar to which u wanna preapre the New TC. tae help of Abaper. tell ur querry and content of ur report . he will definately do it
if ur get my ans reward with points
Regards
Rakesh

How to show register attribute value in my register users report in FIM 2010 R2

Hi,
How to show register attribute value in my register users report in FIM 2010 R2?
Please suggest on this.
Regards
Anil Kumar

hello,
the only way I know is manage the attribute descriptiona s a property and then enable the pivot table option "Show properties in tooltip".
But I'm interested in what you mean with "using
"OLAP pivot table extension" is an option". How this works?
Thanks
bye
Norman

Asset report S_ALR_87011963 is not showing the asset values for perion 08

Hi,
The internal order number is 400011.The amount 38,300 were booked on this order. I have settled 38,050 into 7 assets hence the balance is 250 in this internal order (Work in progress 100050).
When i check the Asset expolorer, there it is showing me this remaining value. But when i run any asset report, say Transaction code - S_ALR_87011963(Asset balances) with report date as 30/05/2008 for period 8, the asset 100050 is showing as NIL Value. But if i run it with date as 30/09/2008 for period 12, then it is showing the balance amount.Our fiscal year is frorm Oct- Sep.
I don't understand why this difference is coming. It should show the balance 250 at the end of period 8.
The last input on this internal order was in March 08 when I transfered most of the costs to the assets.So no reason to have a difference depending on the date of the report.
The internal order 400011 is having status as Released at present.
Can anyboday help me on this. Points will awarded.
Earliest reply will be highly appreciated.
Regards,
Shree.j

Hi Rau,
Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
Thank you ,
Paarthaa...

MCSI Report is showing msg "No value found"

Similar Messages

Maybe you are looking for