Bad item limit when bulk importing pst-files

Hi,
Im about to to bulkimport pst-files into exchange 2010 and I know that some of the pst files have corrupt items i dont want the import to fail. How do I configure the -baditemlimit when i bulkimport pstfiles? Do I just write -baditemlimt after
the powershell command as you do on an single pst/mailbox import? Need suggestions.
Thanks

Hi
Yes you do
http://technet.microsoft.com/en-us/library/ff607310.aspx
Ex: New-MailboxImportRequest -Mailbox Ayla -FilePath \\SERVER01\PSTFiles\Recovered.pst -BadItemLimit 10
The valid input range for this parameter is from 0 through 2147483647.
Jonas Andersson | Microsoft Community Contributor Award 2011 | MCITP: EMA 2007/2010 | Blog:
http://www.testlabs.se/blog | Follow me on twitter:
jonand82

Similar Messages

PST Capture error when trying to import .PST files

I am currently migrating mailboxes from Exchange 2010 to Exchange 2013 on prem. I have installed PST Capture 2.0 and 64-bit Outlook 2013 on a Windows 2008 R2 machine and have installed the PST Capture 2.0 agent on a workstation that has some .pst files
on it. PST Capture finds all the .pst files on the workstation, but when I use PST Capture to try to import PST files into a mailbox on Exchange 2013, I get the error "Import error: Error opening mailbox [email protected]".
I created a userID with a mailbox to run PST Capture. Based on the instructions at
https://technet.microsoft.com/en-us/library/hh781035%28v=exchg.141%29.aspx I have made that user a member of the groups that are assigned the Public Folder Management role, the Mailbox Import Export role and the Organizational Management role. The
user is also a local admin on the machine running the PST Capture console. While the error sounds like a permissions issue, these are the only permissions I could find documented for PST Capture. I am starting PST Capture with "Run as administrator"
Any ideas why this isn't working? Are there any other permissions that the PST Capture user needs? Is there anything else I need to do?
Thank you very much for your help.

Generally PST capture tool allows you to search for PST files & import these PST files
to the mailboxes but as your account is not getting connected, so you need to check settings of your PST Capture tool :
https://technet.microsoft.com/en-us/library/hh781032(v=exchg.141).aspx
If this solution does not work out for you, then I would advise you to use any professional
tool for exchange migration like CodeTwo , Stellar. From my personal experience, I would recommend you to go for Stellar Mailbox Extractor for Exchange Server as it migrated my mailboxes to another Exchange Server in quick time.

Import PST files for multiple users at the same time?

While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding. We had to restart the whole server to get back to normal.
Not sure if importing PSTs was the cause of it it was a coincidence. We have done imports the same way before without this issue.
How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user? I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

Please try like this. Rename folder name same as alias. i.e. \\server\share\<alias>. below are examples.
"\\server\share\jsmith"
"\\server\share\tjones"
"\\server\share\rsmith"
"\\server\share\bspears"
"\\server\share\mmouse"
And run below command to take PST from the corresponding
foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder.
"Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
Error details: Could
not find a part of the path '\\server\share\mmouse\mmouse.pst'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
+ FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

When I import my files only the audio plays back not the video. If I export the sequence its there?

When I import my files only the audio plays back not the video. If I export the sequence its there?
I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
Any help would be appreciated and if theres any more info I can provide please let me know.
Thanks
Drew

Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
Also, More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Dear Team, Can we secure "sent msg" that the receiver cannot edit while forwarding/replying? Is possible to import .PST file(S) into thunderbird?

Dear Team,
Can we secure “sent msg” that the receiver cannot edit while forwarding/replying?
Is possible to import .PST file(S) into thunderbird? If yes, any size limit?
Can we convert thunderbird data file in .PST?

I don't think you can prevent email body text from being copied and edited.
You'd probably need to created a protected Word or PDF document, and send it as an attachment.
This is still some sort of guessing because it's still not clear to me what exactly your scenario is.
Whatever text you send in an email, regardless of whether in the body or as an attachment, the recipient will always be able to use that and distribute it further, e.g. by making a screenshot. And images can be 'photoshoped' as well.
If you want the recipient to be able to detect whether a message or an attachment has been altered on transit, you'd need to sign it.

How to Import .pst files in Mac mail?

I am finding a solution to import .pst files in Mac mail.
In other and simpler words, I am tryng to transfer emails from ms outlook 2007 that supports .pst files to mac mail of mac operating system.
Also it will very helpful if I can get solution for transferring contacts and calender work along with the above asked question.
Eagerly waiting for the solutions.
Thanks

do it with the help of import-export wizard. Here goes the steps for youhttp://www.trickyways.com/2010/08/how-to-transfer-emails-from-outlook-to-apple-m
ail/
Your best move would be if you search for your problem on some search engine
that you use.
Typing "Convert
Pst To Mac Mail" will land you in several solution.
Or you can simply visit apple online store for this problem have a look:
https://itunes.apple.com/in/app/pst-con
... 1009?mt=12
Hope this helps

AME CC 2014 (latest) when I import a file, the last pre-set I used is automatically applied to the file

And I can't seem to find a way to stop this behavior.
If I control click on the preset below the file in the Queue Pane and select remove, it deletes the preset and the file from the Queue.
Any help appreciated.
thanks
MtD

I seem to recall the previously, when I imported a file into AME, no preset was applied until I selected one. Is that incorrect?
Or is the correct workflow to select the preset, then import the file?
As it is now, I have one extra step if I happen to not want the preset that was applied on import, I need to delete it - after adding the preset I do want. Seems an odd way to work to me.
MtD

When I import PSD file then Catalyst stopped working why?

HI,
When I import PSD file then Catalyst stopped working .why? it's a BUG?
Please find the attached image

I'm an a mac, and I haven't had the problem, so I'm not the best for advice. That said, I am sure FC on the pc can import .psd file. I would check the psd for anything "abnormal". If it is a complicated file, simplify as much as possible, flatten effects especially.
**Upload the psd, I could try to import it and upload a fxp

When I import .jpg files they sparodically turn to black. Any suggestions?

I am using Premier Pro CS3. When I import .jpg files, they suddenly turn to black. Any suggestions?

Dan Isaacs wrote:
I also think that JPEGs themselves can be sometimes problematic in CS3. You may also want to try converting them to PSD or BMP.
As I remember from discussions on the old forum...
Depending on how the JPG was created (which software and/or which camera) there is sometimes "extra" information inside the file header that confuses Premiere since it is not part of the basic file specification
Solution was to open in Photoshop (or, rarely, a non-Adobe program) and save to a new name or, as Dan says, to a different format

When I import .mts files into Premiere 7 the audio is intermittent?

Good afternoon. I am new to this forum and your help would be appreciated. I have recently purchased a Sony Hard Drive Camcorder X105E and I have done my first filming. When I import the files into Premiere Elements 7 and preview them the audio is intermittent on playback. What am I doing wrong cause I cant figure it out?
Thanks in advance for your answers
Regards
Edenr1

OK, on the I/O, you have one, nicely sized, physical HDD. You don't have it partitioned, do you?
With one physical HDD, so many things are happening at the same exact time:
1.) your OS is reading/writing to it
2.) your program is reading/writing to it
3.) your media is being read from it
4.) your OS's Virtual Memory is probably being used, so it's reading/writing to it
The problem is that all of these (plus possibly some other programs/Processes) are fighting to get their data handled at the same time. Each is telling the HDD that it needs the heads in one place on a platter. Same for the next program, and the next. Unfortunately, regardless of the speed of the HDD and the speed of the controller, the heads can only be in one place at one time.
Especially for the Audio (that is more I/O intensive, than the Video usually is - it taxes the CPU much more), you will benefit from more physical HDD's.
I just posed an ARTICLE in the Tips & Tricks sub-forum. It links to two articles by Harm Millard. His article on HDD setup is a gem. Now, it takes things to a professional NLE level, and few are quite ready for that, still the info is good. Much can be extrapolated from his suggestions. Though he lists the ultimate Video editing setup, many concepts can be applied on a smaller scale. You might want to read over the linked articles. They will give you some things to think about.
Also, I just saw an ad for a 1TB WD ATA-300 HDD for US$ 79.00 at Fry's Electronics. While you may need an ATA-100, this shows how far prices have fallen. I've got an ATA-100 1TB, to augment my 4x1TB SATA II's, and it's not that old. I paid US$ 400 for it! Should have waited, but then I've used it for the last year, so all is not lost.
Good luck,
Hunt

Why are missing items when import pst files to Outlook 2011 for mac?

Hello.
After installing Office 2011 for Mac I configured Outlook and it was allright.
But when I tried to import a pst file from the old laptop who has Office 2007, I found that in the Outlook 2011 Inbox I have only ~60% items comparative with the Outlook 2007 Inbox.
From Microsoft Office forums I've got an answer that there are indeed some reports with missing items when import pst in Outlook 2011 but the solution they gave me (create folders in Inbox before import) doesn't work.
Do you know something about this kind of problems?
Is it a feature in Outlook 2011 which automaticaly select/delete/combine items based on the similarity between them or based something else?
Have you an ideea how to finally use this macbook and in the same time all my old emails?
Thanks.

Hi Steve,
Thanks for this-yes, eventually, I do send/receive fine, once I've poppedd my passwords in.
I think you are right in that BT seem to be having unique server/login issues...at least this is what I've read elsewhere too.
Iroonically, this AM I opened my new Mac and have *not* been asked for passwords so perhaps the changes I made in the settings yesterday (keychain reset in Mac) and also changing it from smtp.....to mail.btinternet.com solved the issue...who knows? All I know is this last week I've nearly lost the will to live on more than one occasion, from the transition from PC Windows Live Mail to Outlook for Mac.

Calendar Items from Imported PST Files Cannot Be Modified

I have a customer that had their 2008 DC crash with no backup. They created a new AD domain with a new name with all the same users. Then they exported all mailboxes as PST files and imported them into the recreated mailboxes. Now, when
trying to modify a calendar entry, they get a "Don't have permission" error.
My research says this is a known problem that has to do with an incorrect LegacyExchangeDNS attribute. It can be fixed by using the old AD's attribute and adding it as an X500 address on the new Domain. Unfortunately, the old DC is toast.
Any thoughts on how to fix this?
Thanks!

Hi,
According to your description, I understand that all mailboxes are exported as PST files and imported to the new created mailboxes.
The PST exporting and importing may lost some permission during New-MailboxImportRequest importing. Please use
Microsoft Exchange Server MAPI Editor (MFCMAPI) tool to export calendar data and import it to new mailbox to have a try. Also check the Calendar permission for the Calendar folder:
http://blogs.technet.com/b/outlooking/archive/2010/05/14/useful-tools-while-troubleshooting-outlook-issues-3-mfcmapi.aspx
Additionally, here is a helpful KB:
https://support.microsoft.com/en-us/kb/2783959
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Problem importing PST files through Exchange Control Panel

Trying to do what is best here - we have a migration and everything is coming into EX13 from a PST file.
In the ECP I already added the role to allow PST Imports but some of them just fail with no error or explanation. Just a red alert underneath the bell:
Nothing more than that.
Can't seem to find a status queue to see the PST's process either.
Stranger than that is when I see the "failure" all the email looks like it is there - regardless of 1 item or 20000 items they all look like they have in fact been imported to Exchange.
Any ideas on any of this?

Hi Mr.Donowitz,
Is there any error event in the Event Viewer?
"some of them"
Could you please try to use cmdlet to import the affected pst file to another mailbox to test?
New-MailboxImportRequest
http://technet.microsoft.com/en-us/library/ff607310.aspx
Frank Wang
TechNet Community Support

Importing PST file using Import-Mailbox Command Crashes Powershell

I am attempting to import a .pst file into a mailbox via the Import-Mailbox powershell command. The command starts and imports the deleted items and creates the folder structure in the Inbox then crashes powershell. I am running Outlook 2007 SP2 on a Windows 2003 Std SP2 server w/Exchange 2007 SP1 Update Rollup 8 management tools. I have tried everything i can think of. This happens on multiple machines with similar packages installed. No anti-virus software is installed. It happens on both pst files i am testing with and no errors are logged in the event logs either on the exchange mailbox server or the server i am using to do the import.

Have you tried to do this from the actual Exchange 2007 server? I assume you are trying to import the pst to an Exchagne 2007 email account to Exchange 2007 correct?
Have you tried to perform the import on a Windows XP machine using the 32bit EMC/EMS rather then using Windows 2003 server?
I honestly recall in the back of my head a problem with Exchange 2007 and Outlook CDOs or something like that. I could be wrong but I remember something from a year ago.....
Seriously though, try it from a Windows XP machine running the Exchange Managerment Tools and see what happens rather then a W2K3 Server.
SF - MCITP:EMA, MCTS
Yea I double check the link i posted as well I never tried from a 2003 server either, I've always done it from an XP machine, but again we know its works because you got it to work with a newly export PST, so I think its more to do with the PST file itself, hopefully you dont have a bunch of them, if so let the users re-import them =)

Exported and later Imported .pst files retain the permissions from the original Mailbox.

After migrating from Exchange 2003 to 2010 something strange happens when exporting folders to a .pst file and importing them in another mailbox.
The acces right that are applied, are those from the original mailbox.
I have been searching on the internet about this strange behaviour, but it seems our organization is the only one where is applies.
Does anybody have any ideas what can be the cause?

Hi,
For example, userA was granted permissions to the Inbox folder of userB's mailbox. You exported userB's Inbox folder to PST file and then imported to userC's mailbox. After that, userA had permissions for Inbox folder in userC's mailbox as well. This is
what you had encountered, is it right?
Generally, permissions aren't preserved when you export folders to PST file, only the content itself is exported. I recommend you remove this mailbox folder permission using the Remove-MailboxFolderPermission command to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Bad item limit when bulk importing pst-files

Similar Messages

Maybe you are looking for