Bad root Directory CRC
Upon booting into Open Firmware, I get on the first line the message "Warning: bad Root Directory CRC"
The rest of the lines that follow are normal.
What is a bad Root Directory CRC and how does one fix it?
A quick Google search yields CRC = cyclic redundancy checksum. How to fix? Boot with your install disk and use Disk Utility to repair the disk. You might have to use something like Disk Warrior if DU can't fix it.
Similar Messages
-
Perl modules are being installed to the wrong root directory
This is kind of a package, kind of an AUR question. I don't think it is the usual "upgrade to perl-5.20" issue; I've done lots of searching with no obvious mention of my issue.
I have downloaded the PKGBUILDs for perl-tk (in extra) and perl-pdl (in AUR). When I run makepkg on them, the resultant package has the wrong root directory. For example, perl-pdl tries to install into
/home/<username>/perl5/bin/
rather than
/usr/bin
and the libraries want to go into
/home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL
rather than something like
/usr/lib/perl5/vendor_perl/PDL
I don't think I'm doing anything unusual with the build. For perl-pdl, I download the tarball from the AUR and untar it in ~/tmp. Cd to ~/tmp/perl-pdl and then run makepkg. The start of the build process says:
==> Making package: perl-pdl 2.007-1 (Wed Jun 18 16:12:19 PDT 2014)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found PDL-2.007.tar.gz
-> Found perldl.conf
==> Validating source files with md5sums...
PDL-2.007.tar.gz ... Passed
perldl.conf ... Passed
==> Extracting sources...
-> Extracting PDL-2.007.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
INFORMATION: using file /home/<username>/tmp/perl-pdl/src/perldl.conf to set configuration defaults
Makefile.PL: Found required OpenGL version, setting USE_POGL => 1
Types.pm.PL: using typedef long PDL_Indx
Extracting Types.pm
making PDL_B...
making PDL_S...
making PDL_US...
making PDL_L...
making PDL_IND...
making PDL_LL...
making PDL_F...
making PDL_D...
Warning: prerequisite Astro::FITS::Header 0 not found.
Warning: prerequisite Convert::UU 0 not found.
Warning: prerequisite File::Map 0.57 not found.
Warning: prerequisite Module::Compile 0.23 not found.
Generating a Unix-style Makefile
Writing Makefile for PDL::pod
Generating a Unix-style Makefile
Writing Makefile for Inline
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for PDL::PP
Generating a Unix-style Makefile
Writing Makefile for PDL::NiceSlice
Writing MYMETA.yml and MYMETA.json
Basic/Core/Makefile.PL: got root build dir /home/<username>/tmp/perl-pdl/src/PDL-2.007
Basic/Core/Makefile.PL: adding /home/<usenname>/tmp/perl-pdl/src/PDL-2.007/inc
Trying to figure out POSIX threads support ...
Saw pthread.h. Fine.
Fine, your perl was linked against pthread library.
==> Will build PDL with POSIX thread support. Gifts to TJL :-)
and wraps up with
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::Perldl2::NiceSlice.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::Perldl2::PDLCommands.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::Perldl2::PrintControl.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/man/man3/PDL::pdl2.3pm
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/pdl2
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/pptemplate
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/perldl
Installing /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/bin/pdldoc
Appending installation info to /home/<username>/tmp/perl-pdl/pkg/perl-pdl/home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.pod
==> Tidying install...
-> Purging unwanted files...
-> Removing libtool files...
-> Removing static library files...
-> Removing empty directories...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "perl-pdl"...
-> Generating .PKGINFO file...
-> Adding changelog file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: perl-pdl 2.007-1 (Wed Jun 18 16:21:25 PDT 2014)
Excerpts of "pacman -Qlp perl-pdl-2.007-1-x86_64.pkg.tar.xz" look like
perl-pdl /home/
perl-pdl /home/<username>/
perl-pdl /home/<username>/perl5/
perl-pdl /home/<username>/perl5/bin/
perl-pdl /home/<username>/perl5/bin/pdl
perl-pdl /home/<username>/perl5/bin/pdl2
perl-pdl /home/<username>/perl5/bin/pdldoc
perl-pdl /home/<username>/perl5/bin/perldl
perl-pdl /home/<username>/perl5/bin/pptemplate
perl-pdl /home/<username>/perl5/lib/
perl-pdl /home/<username>/perl5/lib/perl5/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/Inline/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/Inline/MakePdlppInstallable.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/Inline/Pdlpp.pmperl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/AutoLoader.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Bad.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Basic.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/CallExt.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Char.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Complex.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Compression.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Config.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Constants.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core.pm
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/Dev.pmperl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/pdl.h
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/PDL/Core/pdlcore.h
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Bad/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Bad/Bad.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/CallExt/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/CallExt/CallExt.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Complex/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Complex/Complex.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Compression/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Compression/Compression.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Core/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Core/Core.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/FFT/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/FFT/FFT.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Fit/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Fit/Gaussian/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/Fit/Gaussian/Gaussian.so
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/GIS/
perl-pdl /home/<username>/perl5/lib/perl5/x86_64-linux-thread-multi/auto/PDL/GIS/Pr
perl-pdl /home/<username>/perl5/man/
perl-pdl /home/<username>/perl5/man/man1/
perl-pdl /home/<username>/perl5/man/man1/PDL::API.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::BadValues.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Bugs.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Course.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Dataflow.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Delta.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::FAQ.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Indexing.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Internals.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::MATLAB.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Modules.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Objects.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::PP-Inline.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::PP.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::ParallelCPU.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Philosophy.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::QuickStart.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Scilab.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Threading.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Tips.1p
perl-pdl /home/<username>/perl5/man/man1/PDL::Tutorials.1p
perl-pdl /home/<username>/perl5/man/man1/pdl2.1p
perl-pdl /home/<username>/perl5/man/man1/pdldoc.1p
perl-pdl /home/<username>/perl5/man/man1/perldl.1p
perl-pdl /home/<username>/perl5/man/man1/pptemplate.1p
perl-pdl /home/<username>/perl5/man/man3/
perl-pdl /home/<username>/perl5/man/man3/PDL.3pm
perl-pdl /home/<username>/perl5/man/man3/PDL::AutoLoader.3pm
perl-pdl /home/<username>/perl5/man/man3/PDL::BAD2_demo.3pm
It seems like the $pkgdir variable is screwed up, but non-perl AUR packages have installed just fine. Any pointers? Thanks.As usual I am probably too late to help. If you have local::lib installed and activated, it will override your destination directory when building packages. This is accomplished by setting environment variables. Joel hinted at this and you've seemed to fix them. Here is a decent list of them, mostly written by me I believe: https://wiki.archlinux.org/index.php/Pe … _variables
I've made tools that generate PKGBUILDs for perl modules and I always try to override these environment variables for just such an occasion. Entirely too much info on the subject is available at the wiki page above. Very few official PKGBUILDs will override these. Only the packages I used to maintain which retain my PKGBUILD will work for you. So... beware. -
Strange files in root directory
Yesterday I noticed that some strange files (directories, actually) had appeared in the root directory on my MacBook Pro, that is, the directory that contains the standard Finder-viewable Applications and System directories and the Unix bin and usr directories.
The new directory was named 5ffffffcb00, and it contained two other hex-named directories, which were empty. Perhaps foolishly, I trashed them yesterday. Nothing bad seems to have happened, but this morning they have all reappeared. Here's the output of "ls -alR /5ffffffcb00/":
total 16
drwxr-xr-x 2 however admin 68 Oct 29 22:36 -03ffffffd4ffffff-4e81010000
drwxr-xr-x 2 however admin 68 Oct 29 22:36 -03ffffffd4ffffff-c1b1a1d3c1
drwxr-xr-x 5 however admin 170 Oct 31 09:02 .
drwxrwxr-t 37 root admin 1326 Oct 29 22:36 ..
-rw-r--r--@ 1 however admin 6148 Oct 31 09:02 .DS_Store
/5ffffffcb00//-03ffffffd4ffffff-4e81010000:
total 0
drwxr-xr-x 2 however admin 68 Oct 29 22:36 .
drwxr-xr-x 5 however admin 170 Oct 31 09:02 ..
/5ffffffcb00//-03ffffffd4ffffff-c1b1a1d3c1:
total 0
drwxr-xr-x 2 however admin 68 Oct 29 22:36 .
drwxr-xr-x 5 however admin 170 Oct 31 09:02 ..
Does anyone have any idea about these? They're visible in the Finder.If your child pages are open when you update the Template, you need to save them again (after you have saved the Template).
You can update "all pages based on your template" at Modify > Templates > Update pages: Files that use... [choose the name of your template]
I'm also assuming that the changes that you are making are within the Ineditable Regions of your Template. Changes made in the Editable Regions will not, by design, change when you change that part of the Template.
Beth
Message was edited by: Zabeth69 -
WDTV Live has lost all content, Root Directory no longer showing on PC - HELP
Hi All, I disconnected my WDTV Live last night from my TV and connected directly to my router with a network cable. When I click on the WDTV under networks in my computer there is nothing there at all! no root folder, none of my files etc. I have tried dropping a new folder in there but it wont let me and the option to right click add new folder is not availble. When plugged back to the tv there is no file contents either, everything is gone. Please help, I'm runnning Windows 7, the WD still turns on, I have no files no root directory, NOTHING!
A co-worker of mine is having a very similar problem with her WD Media Hub. I was the one who helped her get it setup when she first purchased the media hub (a few years back) and so she came to me when she recently went to use it and it acted like as if there was no content on the thing at all. She brought me the device to work and i was able to get it connected to the network and access it via IE (using the web page at http://10.70.0.86:80/) but any attempt to connect directly via windows explorer fails. The hubs name is the default WDTVLiveHub and when I type in \\WDTVLIveHub\ in Windows Explorer it can’t find the device nor can I map a network drive to it. This is how we originally setup her media hub with content, using Windows Explore to copy a bunch of content. When I was able to access the device via IE at 10.70.0.86:80 I went to the System and selected Storage and in the drop down for device the drop down is blank with nothing to select. In the top right there as a red exclamation mark and when I selected it I got a warning saying the drive's was near capacity. This tells me the files are there but for some reason they can’t be accessed. I did a hard reset via the button on the bottom of the device but that did not fix the problem with accessing it via Windows Explorer. I told her to take it home and see if it will work for her when she hooks it up to her tv,.It’s definitely not a firmware update issue because she's not had it connected to the internet so any firmware update would have had to been done manually. Any feedback or troubleshooting suggestions is most welcome.
-
What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files. -
FinRep 9.3.1: All users getting error opening reports from root directory
We are having an irritating, although not missiion critical error
When a user (any user) attempts to open a report from the explorer view in Financial Reporting 9.3.1, we receive an "_Error 1000165"._ No explanation is provided. No folders are openable within the explorer view except "Personal Page."
It is possible to open reports by opening a report that got accidentally stored in the root directory and then opening another report from the menu system in the usual way. So it is not a user permissions/provisioning issue.
Is there a fix to this? I am afraid someone will clean out the root directory and then we won't be able to access our reports.
Update: I can use the pattern "VariancePercent([B(A)],[A(A)])" to cut this to 27 Columns by varying the direct reference to the column. But is there an easier way to do this?
Edited by: user10868938 on Feb 24, 2009 3:43 PMWe have been able to complete the update of our users SSID's in our Planning SQL tables through the utility. We had to create the users in Essbase first though.
However, if I try to log into Planning (through Workspace) I still cannot see the Planning applicaitons I should have access too. In Shared Services if I pull up my network ID and View Report, I do not get any Planning groups to show up that I belong too. I can open the group in HSS and see my ID is in it but when I do the View Report on my ID nothing comes up.
Additionally, if I add a user from scratch to the existing Planning groups that we've migrated and do the View Report they will show up for that user and the security passes through to Planning/Essbase so that I could log on fine. So, the problem is not with adding new users but the existing one's that were migrated. HSS shows the users in the groups but if you view a Report for those users it doesn't look like you belong to any groups.
We are going to apply a patch to Shared Services to see if it helps. It's suppose to deal with Groups that have users from multple domains but one set of those users cannot log into the application they should have access too. We applied this in our stand-alone S9 Essbase environment a couple of months ago to deal with a break between our existing users and groups from HSS to Essbase. Maybe this will be the final piece. -
Error when running captive runtime .exe from root directory of drive.
Platform: Windows
Specifics: Captive runtime desktop app using an ANE.
Problem: I am distributing the app on a flash drive. Ideally,the .exe will be on the root of the drive, so the user will not need to enter a subdirectory. I'm mostly concerned about users moving the software and getting frustrated by this error.
The error is "Adobe Air: The installation of this application is damaged. Try re-installing or contacting the publisher for assistance."
Here's an example. Importantly, this error only occurs when an ANE is included. I tried a few different ANE files created by others, and simply adding them to the project produces the error. I don't even need to use the ANE anywhere in my code.
https://www.dropbox.com/s/epfj0138pfbmu49/soExample.7z
This is a simple application with a few blank buttons. Try extracting in a subdirectory somewhere, and then moving to the root of a flash drive or any other drive. However, I don't recommend running code from strangers on the top directory of your C:\ drive.
Additionally, I installed Apache Flex 4.12 but the error persists. The text simply changed to "Initial content could not be loaded for this application. Try re-installing or contacting the publisher for assistance."
https://www.dropbox.com/s/epfj0138pfbmu49/soExample.7zI did some more testing. Same issue occurs if I create a captive runtime app from Flash Pro. It also happens when I use the Adobe Air installer, but install to the root directory.
Can anyone think of a workaround? -
Import Error: The root directory does not exist
Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
PrabhatHi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution. -
Import Error:Root Directory Does not exist
Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
PrabhatHi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution. -
How do I get iWeb to publish just the files to my root directory
Hey all, when I publish my site to my hosting server via iWeb it's just copying the entire folder into my root directory instead of copying the files to the root directory. This is causing my site url to look like this: www.mysite.com/myfolder/ how do I get iWeb to publich the files in the "myfolder" to my server instead of the entire folder?
I needed to do this while keeping ftp publishing inside iWeb, and so I developed a sneaky solution. I just figured this out, so there may be some extra steps in here. Here goes:
Find the iWeb application on the computer you are publishing from.
Control-Click on the application and choose "Show Package Contents".
In the window that appears, open the folder "Contents".
Control-Click on the folder "Resources" and choose "Get Info".
In the window that appears, open the "Sharing and Permissions" drop-down.
Click the lock in the lower-right corner and enter your password.
Where it says "Read Only" across from "Everyone", click the arrows and choose "Read and Write".
Close the "Info" window and open the "Resources" folder.
Find the "defaultPublishConfiguration.plist" file and change the permissions (repeat steps 4-7 but with "defaultPublishConfiguration.plist" instead of the "Resources" folder).
Open the "defaultPublishConfiguration.plist" file in TextEdit.
Find the line "<string>/Web/Sites</string>".
Change it to "<string>/Web</string>".
Save and close the text file.
Restart iWeb.
Go to your publishing settings and enter the information for your server. Point the "Directory/Path" to the folder above your server's root web folder.
Set "Site Name" to the name of your server's web folder.
Make sure that none of the files in your server's web folder have the same name as those iWeb would upload.
Select File>Publish Entire Site.
It should now publish your site to "http://www.yourdomain.org/Home.html".
Hope it works!
mindoftea -
How can I publish iWeb site in root directory in place of a prior site?
Hi there... I have created a family web site and published it to my .mac account. The problem is that I had previously published another site and that site remains in the 'root' directory of my account. Practically, this means that if anyone types in:
web.mac.com/[username]
... they will get my old site instead of the site i wish them to see... Is there any way I can move my new site so that typing the more simplified 'root' address (above) will bring up the site I wish for them to view?
Powerbook G4 Mac OS X (10.3.9)
Powerbook G4 Mac OS X (10.3.9)Do you have both sites in iWeb together? If so, then simply look in the Site Organizer, select the site that you want to come up by the short URL and drag it to the top of the organizer. iWeb will make whatever site is at the top of the Site Organizer the default site. You should probably do a "Publish ALL to .Mac" after doing this so that all the files are in the right place. So once you do this you can access the default site with the short URL http://web.mac.com/yourname and then you can access the second site by using its URL directly... http://web.mac.com/yourname/iWeb/sitetwoname You could also provide links from site one to site two and vice versa to "link" the two sites together.
-
Hello all,
I have read the forums and know that I cannot use the Log and Transfer function on Final Cut Express 4.0 for my AVCHD files (from my Panasonic HC-V700) AFTER I have transfered the files out of the original root directory. Unfortunately, I did not know this until recently and I have a bunch of old footage in .mts form that I copied onto my harddrive WITHOUT the root directory. I now must get it into Final Cut Express 4.0.1. and I would like to use a Log and Transfer style program so that I can select what I need and erase the rest. I know about the program VoltaicHD which can be used for this purpose. I have not yet purchased it, but I will if this is my best option. The downsides to it are that it takes a lot of time to process the files (i hear from this forum) and that it creates extremely large files (hearsay from this forum, though I would like to know just how big those files are and how they compare to the size of files final cut creates). When I tried the trial version, I also noticed that unlike the log and transfer function in Final Cut Express 4.0.1, you cannot capture multiple subclips from a single clip. Well you can, but you have to load the clip into the viewing window again, which is not ideal.
I would love some more advice on this. I imagine other people have made this same mistake and have had to figure their way out of it.
I was also wondering is it possible to use Final Cut Express's Log and Transfer program directly from files if they are in a different file format. So far my experiments with this have failed. But if this is possible, I suppose I can also just convert all the backlogged files wholesale into a format that Final Cut Express supports more easily for Log and Transfer (What file format would this be? Sorry I am new to this). My new harddrive has a lot of free space, so I could probably handle the huge amount of storage that this would require for the raw footage and then I could erase it after I log and transfer just what I need. In which case, do folks have recommendations for a file convertor. I am dealing with over hundreds of files and I don't think the free online convertors would work. This product has been suggested to me, but I know very little about it.
Thanks!
MiraI am also finding, when I use Voltaic trial version, that the quicktime movies it creates are of inferior quality than those created through log and transfer into final cut express and imovie, particularly during rapid movement. There's a lot of visible lines running horizontally around areas of rapid movement (not sure what the lingo is for this).
Anyway, now I am getting accustomed to the idea that my best bet is probably just a high quality converter to get my mts files into something more useable by final cut. At this point, I am willing to sit through the render time that it will take on final cut express while I edit. I am just trying to get my footage into workable format without losing quality.
Thank you!
Mira -
When I type a link to a page in my root directory in code view and I click on the link in live view it does nothing. When I then go to preview in a browser it works fine. Can anybody help?
I am not sure however I suspect live view is for viewing the page you are working on. You would have to open the other page to see it in live view. The browser on the other hand is doing what it is designed to do. I jump back and forth all the time from live view to the browsers I have installed.
-
Too many files in root directory. How to split them up?
Hi,
I made my site http://isuckatgolf.net in Dreamwever cs3. Having no idea what I was doing when I started 5 years ago all images and pages have been uploaded directly to the root folder/directory. My host GoDaddy.com just sent me a notice that I'm only allowed 1024 folders/files in one directory. I have almost 7000 in the main site and 1500 in the database for the sub-domain/forum (SMF forum). According to Godaddy.com this is a rule of theirs, but it isn't posted anywhere that they could point me to. Only that I have a max. of 500,000 files total in my unlimited shared hosting account.
I'm looking for a new host that can handle the way it is set up today. My question is, IF I have to divide these files up into subfolders or directories (whatever they're technically called), is it possible and is there an "easy" way to do this in Dreamweaver. Obviously manually moving 7000 files will take some time. But can it be done, and do you think it will be necessary no matter who hosts the site?
Lastly, if I do find a host that is ok the way it is, going forward should I direct DW to put future images into an images folder of some kind. I never created one. Right now all the jpg, gif and html files are just listed. (I didn't know how to do it the right way when I started!)
Any help would be apprecaited.
Thanks!
KEnIt does not make any difference where your files are stored as long as the path to the file is correct. Nancy's idea is correct, but you can have sub-folders to the sub-folders. For example, I will have an images folder and within the images folder I will have folders that refer to pages within my site. My images folder may look like
+images
+index
+thumbs
+slides
+gallery
+holidays2012
+thumbs
+images
+holidays2013
+thumbs
+images
+golf
+images
etc, etc.
That way it is easy to discover if there are any redundant images.
The same goes for the pages. You may have a products page with a couple of sub-pages. The directory would the be
index.html
aboutus.html
products.html
contactus.html
+products
fencing_material.html
sport_clothing.html
solar_panels.html
etc, etc
As said, it really does not matter where the files are, with the exception of the index page which must always be in the root directory.
Good luck -
Since using Iolo yesterday, I can't bring up the full front page of some websites, including Bing. Bing is a grey, blank screen. Lumosity looks like part of a root directory. How can I fix this? I'm trying to use IE instead, and having problems with that, too, and I don't like it anyway.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Maybe you are looking for
-
Hello I am new here and have a question. I am buying a 24" iMac to use Logic on when a friend suggested two monitors. Can't I just open up two different windows instead? Also room is a consideration. If I have to buy another monitor, I buy go to a 20
-
WBS elements display like CJ03
Hello All, I have to develop a screen similar to CJ03 where I have to display the WBS elements in the same way as they are displayed in TCODE. How to get the functionality of dropdown buttons in dialog programming? Is there any function mod
-
Hi, Is there any report to display list of PO changes? I know we can trace changes from CDPOS table, but my end users dont have access to SE16 tcode. I need a report so that they can use when ever they want. Thanks shyam
-
Hello, Environment/Task: To get rid of an invoice paper archive all invoices have to be archived as PDF. Half a million have allready been scanned into PDF. They shell be managed by a SAP contentserver but keeping the PDF in the filesystem and not in
-
What does it mean when trying to answer an email and it fails due no relaying allowed.
What is relaying? When trying to answer an email an error message says me relaying allowed. What is needed to answer an email? Please help!