Bad sound when connected to land rover discovery 4 media system (through lr cable)

hello everybody. i need to solve a major issue concerning the ipod (nano and classic) connection through the original land rover cable (same as in jaguar's models) to the discovery 4 media system: the sound is extremely poor, low, fuzzy and sort of echoed...
thank you for your help!

Thanks LaPastenaue.
I ran the network utility but only the macbook had a .local suffix.  I'm struggling to understand the info from Netstat to be honest and obviously I'm not keen on sharing my network data with the rest of the interweb.
I did try moving the TC into the same room as the HH5.  I moved all the connections from the HH and plugged them into the gigabit ethernet ports on the TC and ran one Cat6 from the TC WAN port into the HH, using it as a modem only.  This was not the setup I was hoping for as I am running out of room for kit, but annoyingly, this does give me a solid AirPlay connection on all my devices when on the TC network.
I did a comparison on each setup with netstat and I see that in the first 'Internet' table that the TC is not mentioned in the old setup(TC in separate room) but is listed in the 'Internet' table when I have it plugged up as above.
It seems that whenever I have the music streamer plugged in to the TC directly I get AirPlay but if it daisy chained through the HH ethernet hub I get an intermittant and flaky AirPlay connection.
Any more thoughts?

Similar Messages

  • Bad sound when connected to land rover discovery 4 media system (through lr connection cable)

    hello everybody. i need to solve a major issue concerning the ipod (nano and classic) connection through the original land rover cable (same as in jaguar's models) to the discovery 4 media system: the sound is extremely poor, low, fuzzy and sort of echoed...
    thank you for your help!

    Thanks LaPastenaue.
    I ran the network utility but only the macbook had a .local suffix.  I'm struggling to understand the info from Netstat to be honest and obviously I'm not keen on sharing my network data with the rest of the interweb.
    I did try moving the TC into the same room as the HH5.  I moved all the connections from the HH and plugged them into the gigabit ethernet ports on the TC and ran one Cat6 from the TC WAN port into the HH, using it as a modem only.  This was not the setup I was hoping for as I am running out of room for kit, but annoyingly, this does give me a solid AirPlay connection on all my devices when on the TC network.
    I did a comparison on each setup with netstat and I see that in the first 'Internet' table that the TC is not mentioned in the old setup(TC in separate room) but is listed in the 'Internet' table when I have it plugged up as above.
    It seems that whenever I have the music streamer plugged in to the TC directly I get AirPlay but if it daisy chained through the HH ethernet hub I get an intermittant and flaky AirPlay connection.
    Any more thoughts?

  • Bad sound when connecting iPod to stereo

    Can anyone help with this one?
    I am trying to connect my iPod to my stereo receiver. I have the 5th generation 30gb iPod. I hooked it up to my stereo (Sony str-de825) with a monster cable through the tape & video inputs and it it sounded low and muddy. When I turned it up the sound the receiver blew.
    I now have a new reciever and bought a dock for the iPod, and I am getting the same crappy sound through the stereo and don't want to blow it again (obviously) but would like to be able ot use my iPod in my stereo. Does anyone have any idea of what's going on?
    Thanks in advance.

    Can anyone help with this one?
    I am trying to connect my iPod to my stereo receiver.
    I have the 5th generation 30gb iPod. I hooked it up
    to my stereo (Sony str-de825) with a monster cable
    through the tape & video inputs and it it sounded
    low and muddy. When I turned it up the sound the
    receiver blew.
    I now have a new reciever and bought a dock for the
    iPod, and I am getting the same crappy sound through
    the stereo and don't want to blow it again
    (obviously) but would like to be able ot use my iPod
    in my stereo. Does anyone have any idea of what's
    going on?
    Thanks in advance.
    Why video? verify that u r connecting in the right place. try in the cd input.the cable is ok? try a new set
    .

  • Buzzing sound when connecting my new airport express to bose system

    I recently purchased the new Airport express with the purpose of streaming my music from itunes to my bose system. As soon as I connect my stereo to the Airport express a loud buzzin sound comes out even if the stereo volume is low.
    I've tried the same cable plugged straight from the stereo to my ipad or laptop and this buzzing sound is not there at all. This only happens when I connect the stereo to the new Airport express.
    Please help, before I have no option but to return it.
    The device firmware is up to date.

    Temporarily, plug a pair of headphones into the audio jack on the AirPort Express and test to see if you still hear the buzzing.
    If no, then the Express is operating correctly. The issue is somewhere else....either an intermittent connection in your audio cable, or the jack on the Bose system is defective.
    If you still hear the buzzing when you test the AirPort Express with a pair of headphones, the Express is defective and will need to be returned.

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Lightning to 30 pin adaptor giving no sound when connected to docking station

    lightning to 30 pin adaptor giving no sound when connected to docking station

    I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
    That being said:
    I had the same problem after upgrading.
    Could boot your tablet, should fix the problem.
    1. power off the unit.
    2. Power on by holding the power button and volume up button at the same time.
    3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
    4. this will cold boot the system and the various dock functions should return.
    Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

  • Squeeking sound when connecting but no display

    My ipod non 1G makes squeeking sound when connecting to my computer but no display and no functionality. When disconnecting from computer he is completely dead. Any idea which component is causing that so I can repair it?

    Yes it is.
    I've also tried putting it into different USB ports as well as 3.0 and 2.0.
    And im sure that the screen works because it works fine with my MacBook Pro, so im thinking that i need some sort of driver... Not sure though...

  • Iphone 3 only blank light screen after fall on floor...say sound when connecting to Itunes

    the Iphone is not broken, but it only shows a light blue/white screen. It gives a sound when connecting to Itunes. I have tried ti hardboot but no help. im now trying to recover trough Itunes but the screen is still light blue. it can be the graphic somehow??
    What to do?
    The Phone was falled out of my hands

    The phone is CERTAINLY broken.  It worked immediately before you dropped it, and stopped working right after.  What makes you think that your dropping the phone didn't break it?
    You have 3 choices:
    You can bring your phone to Apple and pay for an out of warranty exchange ($149 in the US)
    You can buy another phone
    You can find a 3rd party repair shop in your area and see if they can ifx it.

  • HT1351 my ipod touch 2nd generation is no longer reconized in itunes when connected to my computer. I have tried different ipod cables and nothing works.

    my ipod touch 2nd generation is no longer reconized in itunes when connected to my computer. I have tried different ipod cables and nothing works.

    Hi Imminnie,
    Thanks for using Apple Support Communities.  If iTunes doesn't recognize your iPod touch, this article may help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    - Ari

  • IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

    It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

    - Try resetting the car system if you can.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

  • My Nano has no sound when connected to car stereo USB

    My Nano has no sound when I connect it to my car stereo USB.  The display works though

    Why don't you try changing the input on the car stereo? I have a '13 Honda Odyssey and whenever I plug in my 7th gen nano I have to press a button labeled "USB/Aux" to switch to the Nano. I would also make sure to check that it is nano compatible, that the volume is up and that the stereo is on. Not to make you sound dumb, but you honestly might feel that way if you had the stereo off, I know I would (and have!)

  • X1 Carbon - No Sound When Connected to Docking Station

    Hi,
    Sound gets muted when connected to docking station/ HDMI.
    Please can you help me restore sound on X1 Carbon even when connected to docking station (inc. HDMI).
    Thanks,
    ME

    I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
    That being said:
    I had the same problem after upgrading.
    Could boot your tablet, should fix the problem.
    1. power off the unit.
    2. Power on by holding the power button and volume up button at the same time.
    3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
    4. this will cold boot the system and the various dock functions should return.
    Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

  • Whistling sound when connected to aux cable

    When I connect ipod nano to AUX port on my stereo I get a whistling feedback sound along with the music. But when connecting another ipod its fine. Any suggestions??

    > The projector speakers are working because if I connect via the VGA output I do get sound from the projector.
    There must be something wrong with projector settings.
    Fact is that HDMI provide digital sound. VGA provides only analogue signal.
    I dont think there is a problem with the notebook since the sound appears properly via speakers and also its working if an TV is connected to the notebooks HDMI port.
    By the way:
    > When plugged into the lecturn via HDMI, I can see the lecturn in the "Playback devices" window. It comes up as "Extron D" which is the name of the System installed. It is enabled and set to default ( green tick)
    In the Playback tab check this projector, click right and choose Properties.
    Now the second tab Level should contain the option to change the volume level.
    Its worth a check.

  • Ipod shuts off all sound when connected

    ipod shuts off all sound on Mac Book when connected.  Any ideas of why this is happening?

    Perhaps you may get better response from the MacBook community forum
    http://discussions.apple.com/community/notebooks/macbook
    But in the Sound panel of the System Preferences, what is output source displayed? ( "Digital audio out"?)

Maybe you are looking for

  • My computer wont let me download the new itunes

    I have clicked on "check for updates" in itunes and it tells me there is a new itunes to download, so when i click on down load it goes to my system softwear updates which after a very long time "checking" comes back and tells me there is nothing to

  • HP LaserJet 100 color mfp M175nw - error 54.2

    I changed my black toner and now I get an error 54.2... I wanted to take the black toner out of my printer, but I cannot get it... Can someone please help me.

  • What package to install the database 10g  in redhat 5

    hi frndz, what package to download and install the database 10g in redhat 5.there are different packs among redhat. can anybody guide me.

  • Windows Server 2008 r2 printer access denied.

    i have a windows server 2008 r2 PC with a printer installed and shared on it. when trying to access the printer from any other PC in the network i get "windows cannot connect to the printer. access is denied" this is from both a windows 7 and windows

  • Config line item layouts for Clear transaction

    hi all, can anyone tell me how I can config these codes Current line item layouts for Clear transaction F-32, menu Settings/ line layout: A1     Allocation / document number K1     Document number K2     Reference no. K3     Account number K4     Acc