Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

Solution may be found if you search in the "More Like This" section over in the right column.

Similar Messages

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

I am not getting any notifications when I use my card

I'm not getting any notifications when I make purchases with my primary card

Select the card under Settings > Passbook & Apple Pay and ensure that Card Notifications is on. This option is not present for Debit Cards.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Not getting any output when running the Webservice through Xacute

hai all,
I am using a transaction as web service to be called in another transaction in the same server. I can see the output of the web service in the tracer, when I execute it in the BLS. But if I run the same transaction via xacute query I am not getting any output. I had read in one of the threads that reference document has to be assigned. I tried doing that also, but no luck. Can somebody pls. throw some light on how to use reference document & whether it is required in my case?
Thanks,
vidhya

Hai Rick,
thanks for the hint i have used document and row actions now iam gettting output through xacute...
thanks,
vidhya.

Hi guys Im using 4.3.2 version and want to upgrade to 5.1.1.So Im not getting any update when i turned on the wifiand i dont have option like "update software" in the settings general ,plz help me out by showing path when i connected to wifi

do the needful

Hi mendel tanx for ur quick reply and I'm not founding the settings>general>"software update" option in my IOS 4.3.2...so do I have a option of downloading or updating from WIFI or I have to download from Itunes only,if I am downloading from itunes i need to download full IOS which is 783mb large..do the needful

XL Reporter not getting any data

Hi
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
STEPS Taken
 XL Reporter Composer Tool bar
 Generate
 Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
Example: I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
 In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
Urs
Sindhu

If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

I'm not getting any sound when i play a video; HP pavilion dv7 Windows 7

I'm not getting any audio when I try to play a video, such as youtube; I have an HP pavilion dv7....op sys is Windows 7; Funny thing is that when my brother signs in under his User ID, he gets audio, but I don't when I'm the user. I've checked all of the on/off audio mute buttons that I know of.
what can you suggest?

Is it just sites like YouTube? Can you play music files-mp3/cd ,hear Windows system sounds,etc?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

I keep getting this error when connecting my phone (0xE8000001)

I keep getting this error when connecting my phone (0xE8000001) to iTunes. Sometimes the phone will try and sync for a little bit then it disconnects. What gives?
And yes, I do have the latest version of iTunes (7.3)

i kept getting all the same errors and i just figured it out. after getting an iphone i went from pure excitment to anger as i plugged it in and realized i needed to upgrade to tiger. then i spent over an hour installing tiger and it still didnt work. i got the same itunes error of not recognizing. HERE IS THE FIX....TURN OFF THE IPHONE AND REMOVE FROM THE DOCK. DONT JUST PUT IT TO SLEEP, HOLD DOWN THE BUTTON UNTIL IT ASKS YOU TO SLIDE TO TURN OFF. THEN CLOSE ITUNES. NEXT TURN THE PHONE BACK ON BY RE-DOCKING. START UP ITUNES IF IT DOESNT START IMMEDIATELY. YOU SHOULD START HAVING FUN NOW, ALBEIT SLOW ON THE 1.1 USB.

Win7 with FF 31, Android 4.2 smart phone with FF letest ver. using same account with 1 email. But phone is not get any pass, Bokmr, etc.

Brother,
We r using win7 with Mozila 31, Android 4.2 smart phone with Mozila latest ver. from google app store on 04/10/0214. Using same account with same email. But phone is not get any new information from win7 with Mozila 31. Pl z give helpful information.

Hi w3ur_team,
Thank you for your question. I understand that there are two devices that are logged into the Sync account. However the Android is not syncing.
There are two places we can check:
# In the Android Settings, under accounts is the attached account Firefox Sync or Firefox Sync (deprecated)?
# Do the login credentials work on accounts.firefox.com on the mobile device and are there any error messages on the Sync menu from Settings > Sync?
Please also see [[Firefox Sync troubleshooting and tips]] for more troubleshooting steps.

After ios5 update, I am not getting any sound when I play music.

After ios5 update, I am not getting any sound when I play music (iphone speakers or headphones). I get sound from games, previewing songs in iTunes, etc. Any idea why? I've resynced and shut down my phone and that didnt help.
iPhone 4

Beer,
is that when you want to play music over the air (airplay) like BT headset or something?
because i am facing the below issue in my car.
the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls.

Im not getting any sound when i select a track and put it in the arrange area

Im new to pro logic,, when i select a track and put it in the arrange area,, im not getting any sound when it plays.. I can hear it play in the list of samples, but not when its in the arrange area,,, help meeeeee

Are you putting the file on an instrument channel rather than an audio channel? That's one possibility. The track could be muted is another.

TS1398 My iPhone 4 is connected to wi-fi when i am home, but when i leave, i do not get any of my whatssapp messages. When i get back home again I get all the messages that has been send through the day. We do have 3G on network. Why is this?

MY iPhone4 is connected to wi-fi, and all is fine at home. When i leave home, i do not get any of my whatsapp messages. When i return home, i get all the messages than was send during the day. Why does my phone not use the cellular network to get my whatsapp messages as my Nokia N8 did?
This is my first iPhone, so i am having some troubles setting everything up!

Please make sure that you are connected to the internet. There sould be a "3G or LTE or 4G or E symbol on the top left corner of the screen, if data is available to you.
Whatsapp uses data services to send and receive messages. You need to be connected to the internet for that.

Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

Similar Messages

Maybe you are looking for