Badi for Equipment Categories

I need to check equipment categories and perform some kind of validations/authority checking to supplement security authorizations. I found a BADI called INST_AUTHORITY_CHECK that will allow me to check equipments and/or functional locations. But how do I activate BADI? I'm using ECC6 and couldn't find it in SPRO.
Thanks in advance!

use table MPOS & MPLA also use t code IP24 this will add some value

Similar Messages

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

BADI for changing product catgory

Hello SRM Experts,
I am looking for an BADI for changing product category.
We use classic scenario with an external catalog. Our supplier delievers us some data. Some of this data are used for statitical reason for example new item matgroup from oci interface.
now I want to determine the product categorie in relation to the delivered new item matgroup.
I have found some BADI to manipulate the Data - but not possible for product category. Thank your for help
Regards Uwe

Hello Yann,
I have activated this BADI already. But I have not managed it to change product category.
Which field of this BADI has to be changed ?
Where do I get the GUID from ?
thank you

User exit / Badi for iw31

Dear all,
When i create a maintenance order(iw31) with reference to equipment it defualts teh equipment cost center, in the location tab.
I have a requirement to change the cost center based on the workcenter / priority, when i save the order.
Is there is any user exit / Badi available for my requirement?
Regards
Murali

Hi
Enhancement/ Business Add-in            Description
Enhancement
IWO10012                                Maintenance order: Priority handling on central header
Business Add-in
IWO_UI_USEFLEX                          BAdI for Calling Up an Alternative UI
No.of Exits:          1
No.of BADis:          1
Arunima

User exits/BAdIs for Forecast consumption by sales order

Hello Experts,
My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
My requirement is:
For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
I appreciate if anybody explain me the process?
Thanks in advance!
Raj

Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
There is no standard way of making the sales order visible in another location.
Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
Can you be more specific.
THanks
Kumar

Parent Child Value Sets for Item Categories

I've tried to set up parent-child value sets, not independent-dependent sets for Item Categories but in vain. So, if Item Category has 2 segments - Category & Sub-Category; Sub-Category only shows valid values for a category. For example, if Category is 19 (Tools), the LOV for 2nd segment would only show 28 (Large Tools), 29 (Heavy Tools) etc.
Creating an independent-dependent combination displays all values for the independent & dependent sets.
Just looking for help here.
Thanks,
Sanjib

Karthik, Sandeep and Hugh
Thanks for your responses. We greatly appreciate you taking the time to reply to this thread. My e-mail is [email protected], that is if you'd like to send any documents.
Basically, this is what we were looking for -
The category structure is
Equipment 1 - Spare 1,
Equipment 1 - Spare 2,
Equipment 2 - Spare 1,
Tools - Large,
Tools - Small,
etc.
When selecting Codes for this structure, if I choose 'Equipment 1' for 1st segment, LOV for 2nd segment would only show 'Spare 1', 'Spare 2'. Similarly, If I choose 'Tools', I only see 'Large', 'Small' for Segment 2.
Thanks,
Sanjib

Badi for IE4N transaction

Hi,
I have an requirement like I have rollers like,
Equipment Des.----
Equip. No -
Material No -
Ser No
1. toproll -
10000-- 200--
1
2. Bottom roll -
10001-- 200--
2
3 Spare-- 10003 200--
3
The spare can fit any of the postion either in Top or Bottom.
In IE4N i could able to do the process, The issue is I wish to get the description of dismantled equipment to spare equipment before installing.
I could able to find the badi for above requirement that is IERI_I_R_CUSTR_CHECK and for the screen IERI_DIALOG_CHECK A&D Implementation of IERI_DIALOG_CHECK in ERP-IS but still the sub screen is not getting activated.
Pls help.
Regards,
N.Nagaraju

Sorry I did not got solved.

Checking for Equipment Category

I need to create a role that will allow certain people access to certain equipment categories but I don't think this could be done. Has anyone done this? Is there any way to do this?
I also found a BADI called INST_AUTHORITY_CHECK which I think might help but how do I activate this? I'm using ECC6 and couldn't find it in SPRO.
Any other suggestions on how to do this role is greatly appreciated.

Hello ,
We can assisgn Insusrance Tab to Equipmnet , Please create the Charactetics name with Insurance using CT04 with Characteritic Value enter YES or No, Create one class using Cl01 , Then assign Characteritic Insurance to Class, then assign clss toequipmnet.
Thanks
Monark

External Number Range setting for Equipment Not working

As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
Equipment category does not allow alphanumeric equipment number
Can some one help whether anyother settings are needed.
(It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
Regards
Jogeswara Rao

Hi Jogeswara Rao,
Check you other post for reply
Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

Reg. Exit/BADI for changing item data of PO in ME22N

Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan K

Thanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header                              - im_header->get_items
2. Loop the item list and get the line item record   - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item                                       - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K

Do you have any idea what is the BADI for creation of Purchase Order?

Hi Gurus, I would like to ask regarding the BADI for the P.O creation in SRM. I have a requirement that if the Account Assignment Type is "asset" it should tick the checkbox (goods receipt/confirmation of performance of service) in the related documents tab of item. Thanks a lot. I hope you can help me gurus.

Thanks for the help.

User Exit/ BADI for PO release

Hi Experts,
Can anyone please tell me about the User Exit or BADI for Sub contract PO release.Also tel me how to proceed for the following 2 requirement ,
i have to send an IDOC as & when the Sub contract PO releases.
And automatically resent if changes are made in PO with the repeat output function in ME22N.
Regards,
Nik

Hi,
Use trx SE19 to implement your BADI: create an ZME_PROCESS_PO_CUST using ME_PROCESS_PO_CUST as definition.
Now in Interface Tabs you can see the METHODs you can use as "user-exit", in particular there's PROCESS_ITEM to manage items data.
You have to write your code into this method.
This method has IM_ITEM like parameter in its interface, and it's like the type IF_PURCHASE_ORDER_ITEM_MM.
This type has the method IF_LONGTEXTS_MM~SET_TEXT, you can try to use it to set your text in item.
This is code for example:
DATA: TLINE TYPE MMPUR_T_TEXTLINES.
CALL METHOD IM_ITEM->IF_LONGTEXTS_MM~SET_TEXT
EXPORTING
IM_TDID = <YOUR ID>
IM_TEXTLINES = TLINE.
So you should read the text you want to copy and pass it to TLINE.
You can use the METHOD PROCESS_HEADER to read the text you need. This METHOD has IM_HEADER as parameter and it's like the type IF_PURCHASE_ORDER_MM, this type has the method IF_LONGTEXTS_MM~GET_TEXT to read header logn text.
Anyway while you're in implementation of the BADI go to:
GoTo->Sample Code
Here you can try an example how to implement the method you need to use.
Regards

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

How to create a BADI for the sceanrio

Hi abapers,
I have a scenario as follows.
I create a Transaction where in i put the details of the product and quantity for a particular project's site. The amount gets calculated based on the products unit value and its displayed in net value field. Now the user saves the transaction and a number gets generated. If the net value amount is less than 500 then the user can approve , if its greater than 501 and less than 1500 then a mail should be generated to his superior who is able to approve and ifs amount is greater than 1501 then a mail should be generated to the top of hierarchy who should approve it.
Now the real challenge is if the same project card has more than 1 new request and the amount is less than 500 the user should not be able to approve instead it should generate a mail to his hierarchy for approval since the site has already been exceeded its limit of approval. bcoz earlier 500 and current 400 which will make it to greater than 500.similarly for the hiearchy.How do i go about it.
Now i want to create a BADI on the save event of transaction to check the net value amount as well as check for earlier amounts saved for the particular site.
Any help will be appreciated.
Regards,
Navin .

hai navin
r u using ECC 6.0 or 4.7 if 4.7 u can create badi defintiion directly form se18 transaction
and define the interface and its methods , once u define them activate them
and to use in ur code u create an instance of ur badi name
and then use
cl_exithandler=>get_instance method in instance name parameter just pass ur badi name and this will create a badi defintion in ur code, and an oen can implement it
if u r usign ecc6.0 then u can either create new badis usign enhancments or classical badis
for clasical badis just go to menu utilites and create classical badis and follw the sam eprocedure
regards
m.a

Badi for Equipment Categories

Similar Messages

Maybe you are looking for