Badi for FB01 F-43 FB60

Hi,
I need Badi's for this tcode FB01,F-43,FB60( When i am posting Invoice with this Transaction). I need to be blocked for payment upon posting in order.
Thanks
Moderator message: please do more research before asking.
Edited by: Thomas Zloch on Apr 6, 2011 12:43 PM

Hi,
You can implement the BTE as said above:
00001020     POST DOCUMENT:       Prior to final checks -- This triggers on Save Button
00001010     POST DOCUMENT:       Check customer line item -- This triggers on Customer Line item when you press enter key
00001011     POST DOCUMENT:       Checks at line item level --- This Triggers for all line items when enter key is pressed.
Go to transaction FIBF to find the BTE and you will have the documentation for each BTE there.
Hope this helps
Regards
Shiva

Similar Messages

Reg: can anyone plz help me finding a badi for FB01

hi..,
   My requirement is to capture the profit center & change it w.r.to the profit center available in purchase order while posting a documet in FB01. iam trying to find a badi for this.. can anyone plz suggest me, how to proceed??? this is the first time iam dealing with badi's...

just run this program u find badi related to transaction.
*& Report ZNEGI16                                                     *
REPORT ZNEGI16                                 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
* Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
* Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
* For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.

Exit or Badi for FB01 to update KMNAM filed value to BKPF free field

Hi Experts,
Please provide me the correct Exits or Badi for to update KMKPF-KMNAM value to BKPF reference field while posting FB01.
I tired with substitution but it was not solved my requirement.
I have to update the KMNAM value into BKPF-XREF2 field as the user selects account assignment model while posting FB01.
Please advise and share me, is there any other solution you have.
Thanks & Regards
Sankar.

Hi ,
These is not exits or badis or BTE are not available eith import paremeters KMKPF.
So you need to get this value using Assign statement in any user exit which contains export parmeter as BKPF .
ASSIGN ('(SAPLSPO4)KMKPF-KMNAM) TO <fs_KMNAM>.
I hope this may helpfull..
Thank you,
Thanks,
AMS

Badi for FB01 post

Hi friends
Someone knows a BADI or exit for document post/fi? I mean in FB01 transaction.
Best Regards

Enhancement/ Business Add-in            Description
Enhancement
SAPLF051                                Workflow for FI (pre-capture, release for payment)
RFKORIEX                                Automatic correspondence
RFEPOS00                                Line item display: Checking of selection conditions
RFAVIS01                                Customer Exit for Changing Payment Advice Segment Text
FARC0002                                Additional Checks for Archiving MM Vendor Master Data
F180A001                                Balance Sheet Adjustment
F050S007                                FIDCCH Outbound: Influence on IDoc for Document Change
F050S001                                FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002                                FIDCC1: Change IDoc/do not send
F050S003                                FIDCC2: Change IDoc/do not send
F050S004                                FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005                                FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006                                FI Outgoing IDoc: Reset Clearing in FI Document
Business Add-in
BADI_FDCB_SUBBAS05                      Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
BADI_PRKNG_NO_UPDATE                    BAdI for Deactivating Update of Parked Documents
F050S008                                FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
FBAS_CIN_LTAX1F02                       Tax interface
FBAS_CIN_MF05AFA0                       EWT - Downpayment Clearing - Tax transfer for CIN
FISPLIT                                 Online Split: Cash Discount, Exchange Rate Differences
FI_PAYREF_BADI_010                      BAdI: Payment Reference Number
FI_RES_ITEM_CURRENCY                    Document of Residual Item with Invoice Currency
FI_TRANS_DATE_DERIVE                    Derive BKPF-WWERT from Other Document Header Data
FVFZ                                    Replacement for Function Modules of Function Group FVFZ
INVOIC_FI_INBOUND                       BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
RFESR000_BADI_001                       BAdI for Own Processing of POR Item
FI_DOC_DISP_LI                          Diversion to Document Items (FB03)
FI_FB08_SUBST_BUDAT                     FB08: Check Posting Date for Reversal of FI Doc. with FB08

User Exit/ BADI for FB01

Hi friends,
The requirement is something like this.
When we post a document using tcode FB01, in few cases we get a warning message
"Tax entered incorrect (code P1, amount           0.00)". We get this Warning message, when we click on Save button.
Now, the requirement is to capture this warning and replace this with an Error Message. If that is not possible, then when we get this warning, posting of document should not be allowed.
I searched for some User Exit/ BADI with which i can acheive this, but could not find any. Could any one of you let me know how to acheive this?
Thank you.
Best Regards,
Ram.

Hello,
user exits
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
BADIs
AC_QUANTITY_GET      Transfer of Quantities to Accounting - Customer Exit
BADI_ENJ_ALT_ADR     Go to alternative vendor/customer data
BADI_F040_SCREEN_600 Screen Enhancement on F040 0600 Document Header
BADI_FDCB_SUBBAS01   Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS02   Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS03   Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS04   Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS05   Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
BADI_PRKNG_NO_UPDATE BAdI for Deactivating Update of Parked Documents
F050S008             FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
FBAS_CIN_LTAX1F02    Tax interface
FBAS_CIN_MF05AFA0    EWT - Downpayment Clearing - Tax transfer for CIN
FI_AUTHORITY_ITEM    Extended Authorization Check for Document Display (FB03)
FI_GET_INV_PYMT_AMT BAdI for determining the payment amount for an invoice
FI_HEADER_SUB_1300   Screen Enhancement for Document Header SAPMF05A
FI_PAYREF_BADI_010   BAdI: Payment Reference Number
FI_TRANS_DATE_DERIVE Derive BKPF-WWERT from Other Document Header Data
INVOIC_FI_INBOUND    BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
RFESR000_BADI_001    BAdI for Own Processing of POR Item
Thank u,
santhosh

Request for info. on USER EXIT/BADI for FB60

Hi,
This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
]Please guide some alternative solution rather than user exit and badi.
I dont think the following user exit and badi are used for withholding tax.
I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Badi
FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
Every expert answer will be rewarded.
Thanks in advance
Cra

Try Business Transaction Events. Transaction code BERP.
Regards,
Zoltá

Need user exit or BADI for FB60

Hi Guys!!,
I am working on one object which   belongs to FB60 transaction. I have to give error message when user enter the ZTERM Value above 45 days for particular vendor group(MSMED).please help out.
Richard.

Hi,
Foloowing are available user exits and BADIs for FB60.
F050S001                                               FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002                                               FIDCC1: Change IDoc/do not send
F050S003                                               FIDCC2: Change IDoc/do not send
F050S004                                               FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005                                               FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006                                               FI Outgoing IDoc: Reset Clearing in FI Document
F050S007                                               FIDCCH Outbound: Influence on IDoc for Document Change
F180A001                                               Balance Sheet Adjustment
FARC0002                                              Additional Checks for Archiving MM Vendor Master Data
RFAVIS01                                               Customer Exit for Changing Payment Advice Segment Text
RFEPOS00                                              Line item display: Checking of selection conditions
RFKORIEX                                              Automatic correspondence
SAPLF051                                              Workflow for FI (pre-capture, release for payment)
Please find the one suitable to your need.
Hope it will help you.
Regards
Natasha Garg

Badi for FB60

Can Some one provide me the BADI for FB60

Hi Saathi,
BADI_FDCB_SUBBAS01
BADI_FDCB_SUBBAS02
BADI_FDCB_SUBBAS03
BADI_FDCB_SUBBAS04
BADI_FDCB_SUBBAS05
Check the code from Previous post. Just copy paste the code and run with TCode as input. You will get all the badi regarding the TCode.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
do 2 times.
enddo.
Regards,
Chandra Sekhar

BAdi for Statistical Posting F-38 & F-55

Hi Experts,
I am going to add additional fields in AR and AP - Statistical posting, F-38 and F-55
I try to look for BADI to maintain it, i came across FI_HEADER_SUB_1300IM, with that, i am able to add the fields for FB01 but it seems cannot be added into F-38 and F-55.
Any suggestion?
Thanks!!

Hi,
For f-38 and f-55,
                                                                                Enhancement/ Business Add-in            Description
Enhancement
SAPLF051                                Workflow for FI (pre-capture, release for payment)
RFKORIEX                                Automatic correspondence
RFEPOS00                                Line item display: Checking of selection conditions
RFAVIS01                                Customer Exit for Changing Payment Advice Segment Text
FARC0002                                Additional Checks for Archiving MM Vendor Master Data
F180A001                                Balance Sheet Adjustment
F050S007                                FIDCCH Outbound: Influence on IDoc for Document Change
F050S001                                FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002                                FIDCC1: Change IDoc/do not send
F050S003                                FIDCC2: Change IDoc/do not send
F050S004                                FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005                                FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006                                FI Outgoing IDoc: Reset Clearing in FI Document
Business Add-in
BADI_ENJ_ALT_ADR                        Go to alternative vendor/customer data
BADI_F040_SCREEN_600                    Screen Enhancement on F040 0600 Document Header
BADI_FDCB_SUBBAS01                      Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS02                      Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS03                      Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS04                      Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS05                      Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
BADI_PRKNG_NO_UPDATE                    BAdI for Deactivating Update of Parked Documents
INVOIC_FI_INBOUND                       BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
F050S008                                FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
FBAS_CIN_LTAX1F02                       Tax interface
FBAS_CIN_MF05AFA0                       EWT - Downpayment Clearing - Tax transfer for CIN
ADJUST_NET_DAYS                         Change to Net Due Date
FISPLIT                                 Online Split: Cash Discount, Exchange Rate Differences
FI_AUTHORITY_ITEM                       Extended Authorization Check for Document Display (FB03)
FI_DOC_DISP_LI                          Diversion to Document Items (FB03)
FI_FB08_SUBST_BUDAT                     FB08: Check Posting Date for Reversal of FI Doc. with FB08
FI_GET_INV_PYMT_AMT                     BAdI for determining the payment amount for an invoice
FI_HEADER_SUB_1300                      Screen Enhancement for Document Header SAPMF05A
FI_PAYREF_BADI_010                      BAdI: Payment Reference Number
FI_RES_ITEM_CURRENCY                    Document of Residual Item with Invoice Currency
RFESR000_BADI_001                       BAdI for Own Processing of POR Item
FI_TRANS_DATE_DERIVE                    Derive BKPF-WWERT from Other Document Header Data
FVFZ                                    Replacement for Function Modules of Function Group FVFZ
AC_QUANTITY_GET                         Transfer of Quantities to Accounting - Customer Exit
If it is helpful rewards points
Regards
Pratap.M

How to Add button in Application Toolbar for Fb01(screen) Transaction

Hi All,
I need to Add a customized Button at Application toolbar for FB01 Tcode for standard screen.
I am unaware of this,please take it as an urgent issue and help me with your inputs.
Points will be given.
Thanks,
Ramesh

On which screen (in which standard status ?) to do what ?
You could try to bypass sscr key requirement using some BAdI like FI_HEADER_SUB_1300 to add a button to screen or identifying an implicit enhancement option in one PBO module/form to change PF-STATUS, then look for such an option in PAI module/forms.
Regards,
Raymond

BADI FOR WITHHOLDING TAX CODES SEARCH HELP

HI,
Is there any BADI for witholding tax code search help. i want to make some changes in it.
field: WITHT
Pls help.

Please find the following BADIs which are called during the transaction FB60.
BADI_FDCB_SUBBAS01
BADI_FDCB_SUBBAS02
PPA_CUST_BADI
BADI_FDCB_SUBBAS03
BADI_FDCB_SUBBAS04
BADI_FDCB_SUBBAS05
What release are you on? I have the same issue for 1042s, but here are some helpful links for turning on the extended withholding tax:
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
Defining withholding tax codes:
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm
Reward points if found helpful....
Cheers,
Chandra Sekhar.

Reg. Exit/BADI for changing item data of PO in ME22N

Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan K

Thanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header                              - im_header->get_items
2. Loop the item list and get the line item record   - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item                                       - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K

Do you have any idea what is the BADI for creation of Purchase Order?

Hi Gurus, I would like to ask regarding the BADI for the P.O creation in SRM. I have a requirement that if the Account Assignment Type is "asset" it should tick the checkbox (goods receipt/confirmation of performance of service) in the related documents tab of item. Thanks a lot. I hope you can help me gurus.

Thanks for the help.

User Exit/ BADI for PO release

Hi Experts,
Can anyone please tell me about the User Exit or BADI for Sub contract PO release.Also tel me how to proceed for the following 2 requirement ,
i have to send an IDOC as & when the Sub contract PO releases.
And automatically resent if changes are made in PO with the repeat output function in ME22N.
Regards,
Nik

Hi,
Use trx SE19 to implement your BADI: create an ZME_PROCESS_PO_CUST using ME_PROCESS_PO_CUST as definition.
Now in Interface Tabs you can see the METHODs you can use as "user-exit", in particular there's PROCESS_ITEM to manage items data.
You have to write your code into this method.
This method has IM_ITEM like parameter in its interface, and it's like the type IF_PURCHASE_ORDER_ITEM_MM.
This type has the method IF_LONGTEXTS_MM~SET_TEXT, you can try to use it to set your text in item.
This is code for example:
DATA: TLINE TYPE MMPUR_T_TEXTLINES.
CALL METHOD IM_ITEM->IF_LONGTEXTS_MM~SET_TEXT
EXPORTING
IM_TDID = <YOUR ID>
IM_TEXTLINES = TLINE.
So you should read the text you want to copy and pass it to TLINE.
You can use the METHOD PROCESS_HEADER to read the text you need. This METHOD has IM_HEADER as parameter and it's like the type IF_PURCHASE_ORDER_MM, this type has the method IF_LONGTEXTS_MM~GET_TEXT to read header logn text.
Anyway while you're in implementation of the BADI go to:
GoTo->Sample Code
Here you can try an example how to implement the method you need to use.
Regards

Function Module for FB01 Vendor line items postings in 3.1 Version

Hello all,
Is there any Function Module for FB01 Vendor line items postings in 3.1 Version. I do not want to go for BDC. Please suggest.
Thanks,
Subba

Hi,
search for function module ACCPOSTING* or get development class of transaction FB01 and goto SE80, enter development class - and search in function group's function module.
Cheers.
...Reward if useful.

Badi for FB01 F-43 FB60

Similar Messages

Maybe you are looking for