Badi for mm01

Hi Experts,
In MM01, I need to disable the check box field of Traceability checked/filled in General Data tab based on the value selection in Lab/office field in Basic Data 1 Tab.
Once the user start creating the material, he first enter few data in Basic Data 1 Tab with Lab/Office field. Once he select any value for this field i need to disable the check box field of Traceability checked/filled in General Data tab based on the value selection in Lab/office field in Basic Data 1 Tab.
I check 2 BADI's available (BADI_GTIN_VARIANT, BADI_MATERIAL_REF)
For BADI_GTIN_VARIANT, i didnt find the Traceability checked/filled field (MARA-ZZTRCCODE) in changing parameters.
I also tried to put the break point for BADI_MATERIAL_REF implementation, but it is not gettign stopped anywhere.
Please suggest.
Khan

Similar Messages

What are the badis for mm01

Hi,
Can i know what are badis exits for MM01/MM02/MM03.Can i know the procedure how to search badis.

This are the available badis and exits for this t.code:
Enhancement/ Business Add-in Description
Enhancement
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Business Add-in
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
o.of Exits: 3
o.of BADis: 11
Find the Exact exits and badis for ur requirement.
How to fine the exact badi:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any
transaction
Regards

User Exit or BAdI for MM01/MM02

Hi all,
i need an user exit or badi for material master after data are saved.
any suggestioon?
thanks
enzo

Here are some exits
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display
Thanks

BADI for MM01/MM02 to be called after save

Hi all,
I am searching for a BADI/user exit which should be called in transaction MM01/02 after user svaes the material data. The requirement is to send material data as an Idoc to an external system based on the material status MARA-VPSTA & MARA-PSTAT = 'Q'.
So the idoc needs to be generated selectively.
Can anyone help me out with this or suggest any better method ?
Thanks in advance.
Shoma

Hi
Try this
MGA00001
MGA00002
Also, check these BADIs
BADI_MATERIAL_CHECK
BADI_MATERIAL_OD
BADI_MATERIAL_REF
DOCUMENT_MAIN01
<b>Reward points</b>
Regarda
Message was edited by:
skk

BADI for MM01,02 and 03 when Materials are

Hi Experts,
I have a requirement of tracking any changes in the material master data i.e. whenever a material is changed, deleted or created i want to update a custom Z table .
I am very new to Material Management.
I believe that these 3 operations viz change, delete or create materials is done through MM01,02 and 03 transactions.
The Z table will be used to update data in customers legacy sys via XI/PI middleware.
I just wanted to know if any Badi / User Exit exists to track these 3 operations (change, delete or create ) related to Materials.
Thanks

hi
please check user exit CIFMAT01 function module EXIT_SAPLCMAT_001
and also this EXIT_SAPLMV01_002
for this purpose
cheers
s.janagar

U-Exit, BADi for MM01/MM03

Hi,
I was thinking if there is any enhacement for my scenario :
Thing is quiet simple, user wants to change some data of the material index in MM02, but because there are some limitations f.e werks, lgort, etc. user must to click appropriate tabstrips after which the data should be loaded for the specific structures f.e:
If we want WMARC-WERKS to be filled (in mm02, exit ZXMG0U02->EXIT_SAPLMGMU_001) user must to click on the "Purchasing TabStrip"...
Question is how to avoid case like that ...
Thanks in advance,
Daniel.

Solved
IF_EX_BADI_MATERIAL_OD~READ_OTHER_MATERIAL_DATA

Screen EXITS and Badi's for MM01 t.code

Hai Guru's,
I hav a requirment of add a aditional tab in the standard Master 'MM01' T.code.
can any one please help me with all possible Screen exits or badi's. Also i want to know weather selecting correct exits depend on the position where we want the new Tab to be placed?
Thank U in advance.

Hi
EXITS :
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display
BADI's
MG_MASS_NEWSEG                          User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD                          BAdI for the Article Hierarchy Connection
CDT_CHECK_MATERIAL                      Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL                     BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF                       Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK                     Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
Regards
Pavan

Badi for making gross weight field mandatory in MM01.

Hi,
Pls tell me the Badi for making gross weight field mandatory in MM01/MM02.
Thanks in Advance.

Hi!
if it is not working with customizing I would do it in this userexit (CMOD)
MGA00001
it is the user exit before saving the material master data.
have fun
Flo

BAdI/User Exit for MM01

Hi All,
I am looking for a User Exit for MM01
I need to catpure the Document data in MM01>Additional data>Document data tab
I checked with the following enchancements but no use
MGA00001
MGA00002
MGA00003
BADI_Material_Check.
Can any one help me in finding the suitable enhancemet?
Thanks
Bhasker

Hi Bhasker
Go to Se18 Tcode
and give the definition name is "DOCUMENT_MAIN01"
check the definition in display mode because it is Sap Standard Definition.
there you will find a "TYPE" Tab
under this you have two check boxes
<b>1) Multiple Use</b>
2) Filter-Depend
if you want multiple implementations check this Check box
after this you need to create a request and the system asks Access Key for Changes
for that you will catch that Key from your Basis Team.
Regards
Sreeni

BADI or userexit for MM01 and MM02

Hi All,
My requirment is that when the user create a new material, the profit center field should be auto populated from the input Plant. For example, if the plant for this new material is A, then profit center PCA will be populate. The mapping between plant and profit center is very simple.
Furthermore, when the user try to save the material with invalid profit center, the system should create a warning message and automatically change the profit center to the valid one as well.
Right now, i'm looking for either BADI or userexit that would be suitable for my requirement. Does anyone know which BADI or userexit, I should use. Thanks in advance

Hi
Check the following
Enhancement
MGA00001                                Material Master (Industry): Checks and Enhancements
MGA00002                                Material Master (Industry): Number Assignment
MGA00003                                Material Master (Industry and Retail): Number Display
Business Add-in
CDT_CHECK_MATERIAL                      Checks for Existence of a Material in a CDT
BADI_MM_MATNR                           Modification-Free Archiving Enhancement of MM_MATNR
BADI_MAT_F_SPEC_SEL                     BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS                    Check Material for Use in iPPE
BADI_MATERIAL_REF                       Addition of customer-defined default data for material
BADI_MATERIAL_OD                        Integration of New Objects in Material or Article Master
BADI_MATERIAL_CHECK                     Enhanced Checks for Material Master Tables
BADI_GTIN_VARIANT                       User Exit for Customer-Specific GTIN Variant Check
BADI_EAN_SYSTEMATIC                     BAdI for Internal Control of EAN Logic
WRF_DISCONT_PARAMS_I                    BAdI: Parameters in Fashion Discontinuation
WRF_DISCONT_FACT_E                      BAdI: Follow-Up Actions in Discontinuation
WRF_DISCONT_CHECKS_I                    BAdI: Scope of Check in Material Reorganization
MG_MASS_NEWSEG                          User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD                          BAdI for Article Hierarchy Connection
Reward points if useful
Regards
Anji

Screen exits for MM01 Tcode

Hi Folks,
          I am doing some enhancements for MM01 Tcode.we need to add new screens to MM01. could any one tell me the available screen exits or BADI' s for tcode MM01. thnx in advance.
                santosh.

Hi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
    Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards

Reg. Exit/BADI for changing item data of PO in ME22N

Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan K

Thanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header                              - im_header->get_items
2. Loop the item list and get the line item record   - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item                                       - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K

Do you have any idea what is the BADI for creation of Purchase Order?

Hi Gurus, I would like to ask regarding the BADI for the P.O creation in SRM. I have a requirement that if the Account Assignment Type is "asset" it should tick the checkbox (goods receipt/confirmation of performance of service) in the related documents tab of item. Thanks a lot. I hope you can help me gurus.

Thanks for the help.

User Exit/ BADI for PO release

Hi Experts,
Can anyone please tell me about the User Exit or BADI for Sub contract PO release.Also tel me how to proceed for the following 2 requirement ,
i have to send an IDOC as & when the Sub contract PO releases.
And automatically resent if changes are made in PO with the repeat output function in ME22N.
Regards,
Nik

Hi,
Use trx SE19 to implement your BADI: create an ZME_PROCESS_PO_CUST using ME_PROCESS_PO_CUST as definition.
Now in Interface Tabs you can see the METHODs you can use as "user-exit", in particular there's PROCESS_ITEM to manage items data.
You have to write your code into this method.
This method has IM_ITEM like parameter in its interface, and it's like the type IF_PURCHASE_ORDER_ITEM_MM.
This type has the method IF_LONGTEXTS_MM~SET_TEXT, you can try to use it to set your text in item.
This is code for example:
DATA: TLINE TYPE MMPUR_T_TEXTLINES.
CALL METHOD IM_ITEM->IF_LONGTEXTS_MM~SET_TEXT
EXPORTING
IM_TDID = <YOUR ID>
IM_TEXTLINES = TLINE.
So you should read the text you want to copy and pass it to TLINE.
You can use the METHOD PROCESS_HEADER to read the text you need. This METHOD has IM_HEADER as parameter and it's like the type IF_PURCHASE_ORDER_MM, this type has the method IF_LONGTEXTS_MM~GET_TEXT to read header logn text.
Anyway while you're in implementation of the BADI go to:
GoTo->Sample Code
Here you can try an example how to implement the method you need to use.
Regards

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

Badi for mm01

Similar Messages

Maybe you are looking for